Category | Serif |
---|---|
Classification | Garalde Old-style |
Designer(s) | Claude Garamond Also: Robert Granjon Jean Jannon |
Shown here | Adobe Garamond Pro (regular style based on Garamond's work; italic on the work of Robert Granjon) |
Garamond is a group of many serif typefaces, named for sixteenth-century Parisian engraver Claude Garamond, generally spelled as Garamont in his lifetime. Garamond-style typefaces are popular and particularly often used for book printing and body text.
Garamond's types followed the model of an influential typeface cut for Venetian printer Aldus Manutius by his punchcutter Francesco Griffo in 1495, and are in what is now called the old-style of serif letter design, letters with a relatively organic structure resembling handwriting with a pen, but with a slightly more structured, upright design.
Following an eclipse in popularity in the eighteenth and nineteenth century, many modern revival faces in the Garamond style have been developed. It is common to pair these with italics based on those created by his contemporary Robert Granjon, who was well known for his proficiency in this genre. [1] However, although Garamond himself remains considered a major figure in French printing of the sixteenth century, historical research has increasingly placed him in context as one artisan punchcutter among many active at a time of rapid production of new typefaces in sixteenth-century France, and research has only slowly developed into which fonts were cut by him and which by contemporaries; Robert Bringhurst commented that "it was a widespread custom for many years to attribute almost any good sixteenth-century French font" to Garamond. [2] [3] [4] As a result, while "Garamond" is a common term in the printing industry, the terms "French Renaissance antiqua" and "Garalde" have been used in academic writing to refer generally to fonts on the Aldus-French Renaissance model by Garamond and others. [5] [6]
In particular, many 'Garamond' revivals of the early twentieth century are actually based on the work of a later punchcutter, Jean Jannon, whose noticeably different work was for some years misattributed to Garamond. The most common digital font named Garamond is Monotype Garamond. Developed in the early 1920s and bundled with Microsoft Office, it is a revival of Jannon's work.
Some distinctive characteristics in Garamond's letterforms are an 'e' with a small eye and the bowl of the 'a' which has a sharp turn at top left. [8] Other general features are limited but clear stroke contrast and capital letters on the model of Roman square capitals. The 'M' is slightly splayed with outward-facing serifs at the top (sometimes only on the left) and the leg of the 'R' extends outwards from the letter. The x-height (height of lower-case letters) is low, especially at larger sizes, making the capitals large relative to the lower case, while the top serifs on the ascenders of letters like 'd' have a downward slope and ride above the cap height. [8] The axis of letters like the ‘o’ is diagonal and the bottom right of the italic 'h' bends inwards. [9] Garamond types have quite expansive ascenders and descenders; printers at the time did not use leading. [10] [11] [12]
Besides general characteristics, writers on type have generally praised the even quality of Garamond's type: John A. Lane describes his work as "elegant and executed with consummate skill...to a higher standard than commercial interest demanded"; [13] H. D. L. Vervliet wrote that in his later Gros-Canon and Parangonne types (meaning sizes of around 40pt and 18pt respectively) he had achieved "a culmination of Renaissance design. The elegant line and subdued emphasis show the classic search for silent and transparent form". [14] [a]
Modern Garamond revivals also often add a matching bold and 'lining' numbers at the height of capital letters, neither of which were used during the Renaissance; [15] Arabic numerals in Garamond's time were engraved as what are now called text figures, styled with variable height like lower-case letters. [16]
Garamond worked as an engraver of punches, the masters used to stamp matrices, the moulds used to cast metal type. [b] Garamond cut types in the 'roman', or upright style, in italic, and Greek. [c] In the period of Garamond's early life roman type had been displacing the blackletter or Gothic type which was used in some (although not all) early French printing. [20] [21] [22] Though his name was generally written as 'Garamont' in his lifetime, the spelling 'Garamond' became the most commonly used form after his death. [23] [24] H. D. L. Vervliet, the leading contemporary expert on French Renaissance printing, uses Garamont consistently. [24]
The roman designs of Garamond which are his most imitated were based on a font cut around 1495 for the Venetian printer Aldus Manutius by engraver Francesco Griffo. [25] [26] This was first used in the book De Aetna, a short work by poet and cleric Pietro Bembo which was Manutius' first printing in the Latin alphabet. [27] Historian Beatrice Warde has assessed De Aetna as something of a pilot project, a small book printed to a higher standard than Manutius' norm. [28] [29] Among other details, this font popularised the idea that in printing the cross-stroke of the 'e' should be level instead of slanting upwards to the right like handwriting, something imitated in almost all type designs since. [24] [25] French typefounders of the 16th century assiduously examined Manutius's work (and, it is thought, De Aetna in particular) [27] as a source of inspiration: Garamond's roman, italic and Greek typefaces were all influenced by types used by Manutius. [30]
An event which was to particularly define the course of the rest of Garamond's career came starting on 6 September 1530, when the printer Robert Estienne began to introduce a set of three [d] roman types adapting the single roman type used in De Aetna to a range of sizes. [31] [32] These typefaces, with their "light colour and precise cut" [33] were extremely influential and other Parisian printers immediately introduced copies. [34] The largest size "Gros-canon" (42.5pt) [e] particularly became a "phenomenon" [36] in Paris: never before had a roman type been cut in so large a size. [37] The designs copied Manutius's type even to the extent of copying the 'M' shown in De Aetna which, whether intentionally or due to a casting defect, had no serif pointing out of the letter at top right. [38] [39] [40] This form was to appear in many fonts of the period, including Garamond's earlier ones, although by the end of his career he had switched to mostly using an M on the Roman capital model with a serif at top right. [41]
The period from 1520 to around 1560, encompassing Garamond's career, was an extremely busy period for typeface creation. [42] Many fonts were cut, some such as Robert Estienne's for a single printer's exclusive use, others sold or traded between them (increasingly over time). [43] The many active engravers included Garamond himself, Granjon, Guillaume Le Bé, particularly respected for his Hebrew fonts, [44] [45] Pierre Haultin, Antoine Augereau (who may have been Garamond's master), [46] Estienne's stepfather Simon de Colines and others. [47] This period saw the creation of a pool of high-quality punches and matrices, many of which would remain used for the next two centuries. [48]
Little is known about Garamond's life or work before 1540, although he wrote in a preface of having cut punches for type since childhood. [46] [49] He worked for a variety of employers on commission, creating punches and selling matrices to publishers and the government. [50] Garamond's typefaces were popular abroad, and replaced Griffo's original roman type at the Aldine Press in Venice. [30] [51] He also worked as a publisher and bookseller. [49] [52] [53] By 1549, a document from theologian Jean de Gagny specified that the goldsmith Charles Chiffin, who had cut an italic for his private printing press, should receive payment at the rate of "the best punchcutter in this city after master Claude Garamont", clearly showing that he was considered the pre-eminent punchcutter in Paris at this time. [38]
Vervliet concludes that Garamond created thirty-four typefaces for which an attribution can be confidently made (17 roman, 7 italic, 8 Greek, 2 Hebrew) and another three for which the attribution is problematic (one each of roman, Greek and Hebrew). [54] If Garamond distributed specimens of his typefaces, as later punchcutters and typefounders did, none is known to survive, although one unsigned specimen in the Plantin-Moretus Museum collection, presenting a synopsis of his late Parangon type, may have been made around the time of his death or soon after. [f]
While some records such as Christophe Plantin's exist of what exact types were cut by Garamond himself, many details of his career remain uncertain: early estimates placed Garamond's date of birth around 1480, but modern opinion proposes much later estimates. [24] A document called the Le Bé Memorandum (based on the memories of Guillaume Le Bé, but collated by one of his sons around 1643) suggests that Garamond finished his apprenticeship around 1510. [56] [57] This is considered unlikely by modern historians since his mother was still alive when he died in 1561 and little is known of him before around 1540. [24] [49] [58]
One particular question about Garamond's early career is whether he cut the typefaces used by Estienne from 1530. Because of Garamond's known connection with Estienne in his later career, it has been assumed that he cut them, [27] but this was not mentioned in contemporary sources: Vervliet suggests that these 'Estienne typefaces' were not cut by Garamond and that his career began somewhat later. [59] [60] [61] [62] Vervliet suggests that the creator of this set of typefaces, sometimes called the 'Estienne Master', may have been a 'Master Constantin', recorded in the Le Bé Memorandum as a master type engraver of the period before Garamond but about whom nothing is otherwise known and to whom no obvious other body of work can be ascribed. [63] [g] If so, his disappearance from history (perhaps due to an early death, since all his presumed work appeared in just four years from 1530 to 1533) and the execution of Augereau on a charge of heresy in 1534 may have allowed Garamond's reputation to develop in the following decade. [61]
Regardless of these questions about his early career, Garamond's late career is well-recorded, with most of his later roman types (in Lane's view, his best work) [67] preserved in complete sets of matrices at the Museum Plantin-Moretus, which has allowed example sets of characters to be cast, with further documentation and attributions from later inventories and specimen sheets. [68] Of the Garamond types preserved, all include small capitals apart from the gros-canon, [7] [68] and the parangonne uniquely includes terminal swash forms for a e m n r t (two forms) and z. [h]
Garamond cut more roman types than italics, which at the time were conceived separately to roman types rather than designed alongside them as complementary matches. [74]
Italics had again been introduced by Manutius in 1500; the first was cut by Griffo. This first italic used upright capitals, copying a popular style of calligraphy. [75] The modern italic style of sloped capitals first appeared in 1527 and only slowly became popular. [76] Accordingly, many of Garamond's italics were quite small and had upright capitals. Some of his italics did have sloped capitals, although Vervliet did not feel he integrated them effectively into the typeface design, "sloped capitals were (and stayed) a weakness in his designs." [77]
Garamond's italics were apparently not as used as widely as Granjon's and Haultin's, which spread widely across Europe. For example, on the 1592 Berner specimen, most of the romans were by Garamond but at least all but one, and probably all, [78] of the italics are Granjon's. [79] Similarly in the 1643 Imprimerie royale specimen, most of the italics are Granjon's. [80] (Some books published by Garamond in 1545 use a very common italic of the period, not cut by him. [81] )
Garamond cut type for the Greek alphabet from the beginning of his recorded career: on 2 November 1540 he contracted to cut a series of Greek faces for the French government, to be used in printing by Robert Estienne. [83] [84] The resulting typeface, known as the Grecs du roi , are very different from his Latin designs: again influenced by Greek typefaces used by Manutius (they were cut in three sizes, the same ones Manutius used), [85] they were based on the elegant handwriting of Cretan scribe Angelo Vergecio, who used many ligatures and traditional contractions in his writing, and include an extraordinarily large number of alternate characters to faithfully replicate it. [86] [87] [88] [89] Arthur Tilley called the books printed from them "among the most finished specimens of typography that exist". [90]
The Grecs du roi punches and matrices remain the property of the French government. [91] They were extremely influential and directly copied by many engravers for other printers, becoming the basis of Greek typeface design for the next two centuries. [92]
Although the Grecs du roi style was popular in Greek printing for the next two centuries, it is problematic for modern setting of body text, due to changing tastes in Greek printing: they are slanted, but modern Greek printing often uses upright type, and because Garamond's types were designed assuming that ligatures would be manually selected and inserted wherever needed; later metal types on the same model used fewer ligatures. [93] [94] [j] Digital 'Garamond' releases such as Adobe's with Roman and Greek character sets often re-interpret the Greek, for instance with upright characters. [96] A commercial digitisation from Anagrafi Fonts, KS GrequeX, uses the OpenType format to include over 1100 abbreviations and ligatures, more than Garamond cut. [97]
According to Lane the most influential Grecs du roi copies were those of Granjon and Haultin, but others may have been cut by Jean Arnould and Nicolas de Villiers, amongst others. [98] Another was made by Arthur Nicholls in London. [99]
Garamond died in 1561 and his punches and matrices were sold off by his widow. Purchasers included the Le Bé type foundry in Paris run by the family of Guillaume Le Bé and Christophe Plantin, who was in Paris at the time; the Frankfurt foundry often referred to by historians as Egenolff-Berner also came to acquire materials of Garamond's. [102] [103] [104] [105] Le Bé's son is known to have written to Plantin's successor Moretus offering to trade matrices so they could both have complementary type in a range of sizes. [106] [38] [107] [k] Konrad Berner showcased various types of Garamond's and other French engravers in a 1592 specimen, which named the types' engravers and would later be a source for historians. [1] [109] [l]
Plantin's collection of original Garamond punches and matrices survives at the Plantin-Moretus Museum in Antwerp, together with many other typefaces collected by Plantin from other typefounders of the period. [111] The collection has been used extensively for research, for example by historians Harry Carter and Vervliet. [112] Plantin also commissioned punchcutter Robert Granjon to create alternate characters for three Garamond fonts with shortened ascenders and descenders to allow tighter linespacing. [113]
Garamond's name was used outside France as a name for 10pt type, often in Dutch as 'Garmond'. [114]
Many modern revival fonts based on French renaissance printing are influenced by the work of Robert Granjon (c. 1513–90), particularly in italic. An engraver with a long and wide-ranging career, Granjon's work seems to have ranged much more widely than Garamond's focus on roman and Greek type, cutting type in italic, civilité (a cursive blackletter), and for the Vatican type in exotic alphabets including Arabic, Armenian and Hebrew. His career also took in stops in the Netherlands, Switzerland, Germany and finally for the last twelve years of his life Rome, where he ended his career in the service of the Vatican.
Vervliet comments that Granjon "laid the foundation for our image of the way an Italic should look." [115] Although he was not quite the first designer to use the idea of italics having capitals sloped to complement the roman, he "solved successfully the problem of a balanced inclination of the capitals, a feature much ahead of the designs with a more irregular slope of his Viennese and Mainz predecessors...and even compared to...Garamont. A proper optical harmony of the angle of slope is characteristic for all Granjon’s Italics; it allowed the compositor to use whole lines of capitals without causing too much giddiness." [116] [117] Granjon also cut many swash capitals, which Vervliet describes as "deliciously daring" and have often been copied, for instance in Robert Slimbach's revivals for Adobe (discussed below). [116] [118]
Besides Garamond, Granjon and the "Estienne master", other engravers were active in the French renaissance style.
Pierre Haultin particularly created many types which were very popular and distributed very widely around Europe: as a Protestant, he spent much of his career outside Paris working in Geneva, Lyons and La Rochelle and his nephew Jérôme established a career importing and casting his types in London, where his types were extremely common. [119] In Carter's view Haultin "has been greatly underrated". [105] Another engraver whose types were very popular in London was François Guyot, who moved from Paris to Antwerp and then London. [120] [121] [122]
In 1621, sixty years after Garamond's death, the French printer Jean Jannon released a specimen of typefaces in the Garamond/Granjon style. [8] [123] Jannon wrote in his specimen that:
Seeing that for some time many persons have had to do with the art [of printing] who have greatly lowered it ... the desire came upon me to try if I might imitate, after some fashion, some one among those who honourably busied themselves with the art, [men whose deaths] I hear regretted every day [Jannon mentions some eminent printers of the previous century] ... and inasmuch as I could not accomplish this design for lack of types which I needed ... [some typefounders] would not, and others could not furnish me with what I lacked [so] I resolved, about six years ago, to turn my hand in good earnest to the making of punches, matrices and moulds for all sorts of characters, for the accommodation both of the public and of myself. [38]
Jannon was a Protestant in mostly Catholic France. After apparently working with the Estienne family in Paris he set up an independent career as printer in Sedan in what is now north-eastern France, becoming printer for the Protestant Academy. By his report he took up punchcutting seriously in his thirties, although according to Williamson he would have cut decorative material and engravings at least before this. [23] [73] Sedan the time enjoyed an unstable independence as a principality at a time when the French government had conceded through the Edict of Nantes to allowing a complicated system of restricted liberties for Protestants. [124]
The French Royal Printing Office (Imprimerie Royale) appears to have bought matrices from him in 1641 in three large sizes, roman and italic at roughly 18, 24 and 36 point sizes. (The contract is actually made for one 'Nicholas Jannon', which historians have concluded to be a mistake. [125] ) Despite the purchase, it is not clear that the office ever much used Jannon's type: historian James Mosley has reported being unable to find books printed by the Imprimerie that use more than two sizes of italic. [m] [24] [126] His type would later be misattributed to Garamond. [127] Despite this, it is known that authorities in 1644 raided an office in Caen where he had been commissioned to do printing. [128] Warde initially assumed that this was the source of the Jannon materials in the Imprimerie Nationale before the government's purchase order came to light. [23] [38] [127] [129] Jannon's types and their descendants are recognizable by the scooped-out triangular serifs on the top left of such characters as 'm', 'n' and 'r', which curve to a steeper slant in Jannon's design compared to Garamond's. The italics are also very different from Garamond's own or Granjon's, being much more ornate and with considerable variation in angle of the capitals. [38] [130] Opinions of Jannon's engraving quality have varied; Warde found them "so technically brilliant as to be decadent" and "of slight value as a book face" (the surviving Jannon sizes were intended as display faces, cut at 18pt or larger) and Vervliet described them as "famous not so much for the quality of the design but as for the long-term confusion it created", although many reproductions of his work were successful in printing in the twentieth century. [131] Jannon cut far more types than those surviving in the Imprimerie collection: before the misattribution to Garamond, he was particularly respected for his engraving of an extremely small size of type, known for his workplace as sédanoise, which was popular. [73] [132] [133]
By the nineteenth century, Jannon's matrices had come to be known as the Caractères de l'Université (Characters of the University). [23] [126] [134] It has sometimes been claimed that this term was an official name designated for the Jannon type by Cardinal Richelieu, [135] while Warde in 1926 more plausibly suggested it might be a garbled recollection of Jannon's work with the Sedan Academy, which operated much like a university despite not using the name. Carter in the 1970s followed this conclusion. [125] Mosley, however, concludes that no report of the term (or much use of Jannon's matrices at all) exists before the nineteenth century, and it may originate from a generic term of the eighteenth century simply meaning older or more conservative typeface designs, perhaps those preferred in academic publishing. [134]
The old-style typefaces of Garamond and his contemporaries continued to be regularly used and kept in the stock of European typefounders until the end of the eighteenth century [n] and appear in the major French type foundry specimen books of the eighteenth century, of Delacolonge, [138] [139] Lamesle, [18] and Gando. [140] In Delacolonge's book, many fonts were shown "mutilated" or as "bastard" fonts: with replacement characters, specifically cut-down descenders to allow tighter linespacing. [141] According to James Mosley French renaissance romans remained popular for slightly longer than italics, due to a taste for new italics, wider and with flat incoming serifs, introduced by the Romain du roi type and popularised by Simon-Pierre Fournier (see below): "it is common enough, in the second half of the eighteenth century, to find books set in a Garamond roman or a near copy mated with one of Fournier's italics". [142]
A trademark associated with the Garalde style in modern times is the four-terminal 'W', although sixteenth-century French typefaces generally do not include the character as it is not normal in French. Many French renaissance typefaces used abroad had the character added later, along with the 'J' and 'U': these were often very visibly added by lesser craftsmen, producing an obvious mismatch. [143] [144] [p] Granjon added a 'W' and 'w', both with three upper terminals, to Garamond's Breviare roman in 1565 for Plantin. [146]
The foundry of Guillaume Le Bé I which held many of Garamond's punches and matrices passed to Guillaume Le Bé II, and came to be managed by Jean-Claude Fournier, whose son Jean-Pierre in 1730 purchased it. [147] (His younger brother, Simon-Pierre Fournier, rapidly left the family business and became a major exponent of modern ideas in printing, including standardised point sizes and crisp types influenced by contemporary calligraphy. [148] )
In 1756, Jean-Pierre Fournier wrote of his collection of vintage equipment that "I am the owner of the foundry of Garamond, the Le Bé family and Granjon. I shall be happy to display my punches and matrices to all those who are lovers of true beauty ... these are the types that made the reputations of the Estiennes, Plantin and the Elzevirs," and referred to an inventory that he said was in his possession that had been drawn up after Garamond's death in 1561. [149] [150] (The comment was made in a journal during a public dispute with a printer of more modern tastes who preferred to remain anonymous and may have been his younger brother. [23] [151] ) The 1561 inventory does not survive, although some later inventories do; by this point Fournier's foundry may have become rather inactive. [152]
Old-style serif typefaces by Garamond and his contemporaries finally fell out of use altogether with the arrival of what is now called the Didone, or modern-face, style of printing in the eighteenth and early nineteenth centuries, promoted by the Didot family in France and others. [23] [153] [154] This favoured a much more geometric, constructed style of letter which could show off the increasingly refined paper and printing technologies of the period. [155] Lane suggests Fournier's type foundry may have finally disposed of its materials around 1805; [156] in contrast, the collections of the Plantin-Moretus Museum survive almost intact. Mosley comments: [134]
The upheavals of the Revolution coincided with the major shift in the style of printing types that is associated with the family of Didot, and the stock of old materials abruptly lost its value, except as scrap. Punches rust, and the copper of matrices is recyclable. All traces of the early types that had been in the hands of the trade typefounders like Le Bé, Sanlecque and Lamesle in Paris vanished completely. No relics of them were saved anywhere, except in commercial centres that had become relative backwaters, like Antwerp, where the Plantin-Moretus printing office piously preserved the collection of its founder ... the term caractères de l'Université became attached by default to the set of apparently early matrices that had survived, its provenance forgotten, in the mixed stock of materials of the national printing-office.
Garamond's reputation remained respected, even by members of the Didot family whose type designs came to dominate French printing. [24]
A revival of interest in 'old-style' serif typefaces took place in the late nineteenth and early twentieth century. This saw a revival of the Imprimerie royale typefaces (the office was now called the Imprimerie nationale following the end of the French monarchy), which, unlike Garamond's own work, had survived in Paris. The attribution came to be considered certain by the Imprimerie's director Arthur Christian, who commissioned the cutting of additional sizes in a matching style. [24]
Early revivals were often based directly on the Imprimerie nationale types, one of the first by Peignot and then by American Type Founders (ATF). [157] [158] These revivals could be made using pantograph machine engraving systems, which gave a cleaner result than historic typefaces whose master punches had been hand-carved, and allowed rapid development of a family in a large range of sizes. [159] [160] In addition, the new hot metal typesetting technology of the period created increasing availability and demand for new fonts. Among hot metal typesetting companies, Monotype's branches in Britain and the United States brought out separate versions, and the American branch of Linotype licensed that of ATF. [38] [161]
A number of historians began in the early twentieth century to question if the Imprimerie nationale Latin-alphabet type was really the work of Garamond, as the Grecs du Roi undoubtedly were. Doubt was raised by French historian Jean Paillard, but he died during the First World War soon after publishing his conclusions in 1914 and his work remained little-read. [23] [24] [162] [163] ATF's historian Henry Lewis Bullen secretly doubted that the 'Garamond' his company was reviving was really Garamond's work, noting that he had never seen it in a sixteenth-century book. He discussed his concerns with ATF junior librarian Beatrice Warde, who would later move to Europe and become a prominent writer on printing advising the British branch of Monotype. [129] [135] [164]
In a 1926 paper published on the British typography journal The Fleuron , Beatrice Warde revealed her discovery that the Imprimerie nationale type had been created by Jean Jannon, something she had discovered by examining printing credited to him in London and Paris and through reading the work of Paillard, and perhaps with advice from French bibliographer Marius Audin. [23] [38] [164] [165] [q]
By the time Warde's article was published some revivals had been released that were more authentic revivals of Garamond's work, based on period books and printing specimens. The German company Stempel brought out a crisp revival of the original Garamond typefaces in the 1920s, inspired by a rediscovered specimen from the Egenolff-Berner foundry in Frankfurt, as did Linotype in Britain. [167] [r]
A 1920s adaptation created by the Stempel Type Foundry and released for hot metal typesetting by Linotype, that has remained popular. Its lower case 'a' has a sharp and somewhat angular look with a crisp hook at the top left, in contrast to a teardrop design that is common in many other serif typefaces. Stempel Garamond has relatively short descenders, allowing it to be particularly tightly linespaced. [38] [161] [175] An unusual feature is the digit 0, which has reversed contrast, with the thickest points of the number on the top and bottom of the digit to make it more distinguishable from an 'o'. [176] [177] The Klingspor Museum credits it to Stempel's head of typeface development Dr. Rudolf Wolf. [178]
Garamond No. 1 and Garamond No. 2 are both based on Stempel Garamond, with various differences. [168] [179] [180] Another typeface known as Original Garamond is a clone of Stempel Garamond. [181]
Garamond No. 8 is a freeware version of Stempel Garamond contributed by URW++ to the Ghostscript project; it was included in GhostScript since Stempel Garamond is included as a system font in some implementations of the PostScript standard. [182] It is distributed under the AFP license, which allows it to be copied freely but not sold. [183] It is understood that its license does not place any restriction on whether the typeface is used in commercial settings (as long as the typeface is not distributed in situations where a fee is involved), nor whether printed contents created with it are sold. [184] Garamond No. 8 hence does not have a fully open-source license, but its license does not restrict usage for personal purposes or commercial printing.
Featuring a bold weight, small capitals, optional text figures and automatic ligature insertion, it is particularly popular in the TeX community and is also included on some Linux distributions. [185] Originally released as a PostScript Type 1, it has been converted into the TrueType format, usable by most current software. [186]
Garamond No. 8 is often packaged as "urw-garamond" in the open source communities, [187] [188] but is actually different from another typeface that is simply known as URW Garamond. [189] [190]
Granjon was a 1920s revival designed by George W. Jones for the British branch of Linotype, using a 1582 history textbook as a model and also influenced by Caslon. [38] [191] [192] [193] [194] It was the favourite Garalde of many in the twentieth century, including Warde and Walter Tracy. [195]
Jones also created for Linotype Estienne, a delicate revival based on Robert Estienne's fonts of the 1530s discussed above, with very long ascenders and descenders. [196] It was less popular and as of 2017 [update] it has not been officially digitised by Linotype. [197] Williamson suggested that in body text it failed to adapt the style of a large letter effectively down to body text size, giving a design with an extremely small x-height. [198]
Sabon is a Garamond revival designed by Jan Tschichold in 1964, jointly released by Linotype, Monotype and Stempel in 1967. [199] [200] [201] It is named after Jacques Sabon, a Frankfurt-based printer, who introduced the typefaces of Garamond and his contemporaries to German printing. [202] An unusual feature of many releases of Sabon is that the italic, based on Granjon's work, is wider than most normal italics, at the same width as the roman style. [203] This suited Linotype's hot metal typesetting system. [1] Later Sabon versions, such as Jean François Porchez's Sabon Next, have not always maintained this principle.
Tschichold stated that Sabon was designed based on the Egenolff-Berner specimen, although there are different accounts on whether it was drawn using the Saint Augusin (around 13pt) or the Parangon (around 18.5pt) models. [201] Porchez and Christopher Burke later researched into Sabon during the development of Sabon Next. They suggested that aspects of Sabon's design may have been copied from a type by Guillaume Le Bé, a large-size specimen of which he had Tschichold reproduced in a textbook. [201] Sabon Next was based on the version of Sabon that was developed for the Stempel metal handsetting system, along with designs of other Garamond types. [201]
A 1972 revival for phototypesetting issued by H. Berthold and designed by Günter Gerhard Lange. [204] [205]
URW Garamond (which is different from URW Garamond No. 8 mentioned above, despite the latter is often packaged as "urw-garamond" in open source software) is a clone of Berthold Garamond. [189] [181]
Released in 1989, Adobe Garamond is designed by Robert Slimbach for Adobe Systems following a research visit to the Plantin-Moretus Museum, based on a Roman type by Garamond and an italic type by Robert Granjon. [206] [69] [207] [208] [209] [210] The font family has 3 weights (Regular, Semibold, and Bold), each with its respective italic, totalling 6 styles. [211] Its quite even, mature design attracted attention on release for its authenticity, in contrast to the much more aggressive ITC Garamond popular at the time. [212] [213] [214] [s] It is one of the most popular versions of Garamond in books and fine printing. [215] Slimbach decided not to base the design directly on Garamond types in the 9–15pt sizes normally used for book text, but on a larger type called parangonne or vraye parangonne, which he felt was Garamond's "most attractive work". [69] [216] It was reviewed by Hugh Williamson for the Printing Historical Society as "well-suited to photocomposition and to offset printing". [210] It also received two detailed reviews in the same issue of Printing History, both a favourable one by Jery Kelly [213] and a more critical one by book designer Mark Argetsinger. [217] Argetsinger felt that while the parangonne type was "a very beautiful design", [218] the choice to base a text type on it produced a type of "relative pallidness" when printed by lithography. [219] He recommended that Adobe add more optical sizes. [220]
During the production of Adobe Garamond, its designer Robert Slimbach started planning for a second interpretation of Garamond after visiting the Plantin-Moretus Museum in 1988. He concluded that a digital revival of Garamond's work would not be definitive unless it offered optical sizes, with different fonts designed for different sizes of text. [221] Unable to create such a large range of styles practically with the technology and business requirements of the 1980s, he completed the project in 2005. Adobe states that Garamond Premier was developed based on multiple specimens at the Plantin-Moretus Museum. [222]
Garamond Premier has 4 optical sizes (Regular, Caption, Subhead, and Display) and at least 4 weights (Regular, Medium, Semibold, and Bold, with an additional Light weight for Display), each with its respective italic, totalling 34 styles in the OpenType font format. [223] [224] [225] [226] Garamond Premier and its predecessor Adobe Garamond have the same x-heights, but they have many subtle differences in their designs. At the same weights and x-heights (hence font sizes), Garamond Premier is slightly darker and has tighter spacing than Adobe Garamond. Some other notable differences include (but are not limited to) the designs of the lowercase "t", lowercase "r", and uppercase "Q".
It features glyph coverage for Central European, Cyrillic and Greek characters including polytonics. [226] [227] [228] Professor Gerry Leonidas, an expert in Greek-language printing, described it in 2005 as "bar none, the most accomplished typeface you can get for complex Greek texts". [229] Adobe executive Thomas Phinney characterized Garamond Premier as a "more directly authentic revival" than their earlier Garamond, which he described as "a more restrained and modernized interpretation". [230]
The EB Garamond («Egenolff-Berner-Garamond») is a free and open-source software implementation of Garamond, released by Georg Duffner in 2011 under the Open Font License. [231] Duffner based the design on the 1592 Berner specimen, with italic and Greek characters based on Robert Granjon's work, as well as the addition of Cyrillic characters and OpenType features such as swash italic capitals and schoolbook alternates. [232] As of 2014 [update] , it was intended to include multiple optical sizes, including fonts based on the 8 and 12 point sizes. It has been described as "one of the best open source fonts" by prominent typeface designer Erik Spiekermann. [233] As Georg Duffner was unable to complete the bold weights for personal reasons, the project was continued by Octavio Pardo. [234] [t]
American Type Founders created a revival of the Imprimerie Nationale fonts from around 1917, which was designed in-house by its design department led by Morris Fuller Benton under the influence of its historian and advisor Henry Lewis Bullen. [237] [238] It received a sumptuous showing, marketed especially towards advertisers, in ATF's 1923 specimen book. [239] Also involved in the design's development was book and advertising designer T.M. Cleland, who created a set of matching borders and ornaments and according to Warde and Garnett also advised on the design and designed the swash characters. [38] [192] [u]
While ATF's handset foundry type release was initially popular, the design became particularly known to later users under the name of "Garamond No. 3”, as a hot metal adaptation that was licensed to Linotype's American branch and sold from around 1936. More practical to use than ATF's handset foundry type, the number distinguished it from two versions of Stempel Garamond which Linotype also sold. [168] [241] It was the preferred Garalde font of prominent designer Massimo Vignelli. [242]
Several digitisations have been made of both ATF's Garamond and the Linotype adaptation, most notably a 2015 digitisation by van Bronkhorst with optical sizes and the original swash characters. [243] [244] [245] A loose adaptation with sans-serif companion by Christian Schwartz is the corporate font of Deutsche Bahn. [246]
Images from American Type Founders' 1923 specimen book.
Monotype's 1922–1923 design, based on Jannon's work in the Imprimerie Nationale, is bundled with Microsoft Office. [247] [248] Its italic, faithful to Jannon's, is extremely calligraphic, with a variable angle of slant and flourishes on several lower-case letters. [249] Its commercial release is more extensive than the basic Microsoft release, including additional features such as swash capitals and small capitals, although like many pre-digital fonts these are only included in the regular weight. Popular in the metal type era, its digitisation has been criticised for having too light a colour on the page for body text if printed with many common printing systems, a problem with several Monotype digitisations of the period. [210] [250] [251] [252] [253] Monotype's 1933 guide to identifying their typefaces noted the asymmetrical T, the sharp triangular serif at top left of m, n, p and r, and a q unlike the p, with a point at top right rather than a full serif. [254]
Monotype's artistic advisor Stanley Morison wrote in his memoir that the italic was based on Granjon's work, but as Carter's commentary on it notes, this seems generally to be a mistake. [8] [125] The swash capitals, however, at least, probably are based on the work of Granjon. [255] A 1959 publicity design promoting it was created by a young Rodney Peppé. [256]
A revival by Frederic Goudy for the American branch of Monotype, the name chosen to differ from other revivals. [257] [258] An elegant sample created by Bruce Rogers was shown in a spring 1923 issue of Monotype's magazine. [259] It, like Monotype Garamond, features a large range of swash characters, based on Imprimerie Nationale specimen sheets.
Mosley has described it as "a lively type, underappreciated I think." [164] LTC's digitisation deliberately maintained its eccentricity and irregularity true to period printing, avoiding perfect verticals. [260] In 1923, Morison at the British branch of Monotype thought it somewhat florid in comparison to the version of his branch which he considered a personal project, noting in a 1923 letter to American printer Daniel Berkeley Updike that "I entertain very decided opinions about this latest of Mr. Goudy's achievements ... a comparison leaves me with a preference for our version." [261]
A 1950s version following Jannon by the Simoncini company of Italy, owned by Francesco Simoncini, which sold matrices for Linotype machines. [262] It is particularly popular in Italian printing.
František Štorm's 2010 revival with optical sizes is one of the few modern revivals of Jannon's work. [263] [264] Štorm also created a matching sans-serif companion design, Jannon Sans. [265]
As one of the most popular typefaces in history, a number of designs have been created that are influenced by Garamond's design but follow different design paths.
ITC Garamond was created by Tony Stan in 1975, and follows ITC's house style of unusually high x-height. It was initially intended to serve as a display version but has been used for text, in which its tight spacing and high x-height gives it a somewhat hectoring appearance. [1] As a result, it has proven somewhat controversial among designers; it is generally considered poorly proportioned for body text. [203] [266] [267] It remains the corporate font of the California State University system in printed text. [268] As seen below, it was also modified into Apple Garamond which served as Apple's corporate font from 1984 until replacement starting in 2002 with Myriad. Publishers using it included O'Reilly Media and French publisher Actes Sud. [203] [269] [270]
An open-source adaptation of Garamond intended for display sizes, designed by Christian Thalmann and co-released with Google Fonts. [271] [272] It features a delicate style suitable for printing at larger sizes, and considerable contrast in stroke weight in its larger sizes. Thalmann added several unusual alternate designs such as an upright italic and unicase styles, as well as exaggerated, highly slanting accents. [273] [274]
Several sans-serif typefaces have been published that are based on the proportions of Garamond-style fonts, both as standalone designs or as part of a font superfamily with matching serif and sans-serif fonts. [275] One example is Claude Sans, a humanist sans-serif based on the letterforms of Jannon's type, created by Alan Meeks and published by Letraset and later ITC. [275] [276]
It has been claimed that Garamond uses much less ink than Times New Roman at a similar point size, so changing to Garamond could be a cost-saver for large organizations that print large numbers of documents, especially if using inkjet printers. [287] [288] Garamond, along with Times New Roman and Century Gothic, has been identified by the GSA as a "toner-efficient" font. [289]
This claim has been criticised as a misinterpretation of how typefaces are actually measured and what printing methods are desirable. Monotype Garamond, the version bundled with Microsoft Office, [248] has a generally smaller design at the same nominal point size compared to Times New Roman and quite spindly strokes, giving it a more elegant but less readable appearance. In order to increase the legibility of Garamond, a common approach in typography is to increase text size such that the height of its lower-case characters (i.e., the absolute x-height of the font) matches that of Times New Roman, which counterbalances cost savings. Thomas Phinney, an expert on digital fonts, noted that the effect of simply swapping Garamond in would be compromised legibility: "any of those changes, swapping to a font that sets smaller at the same nominal point size, or actually reducing the point size, or picking a thinner typeface, will reduce the legibility of the text." [247] Professional type designer Jackson Cavanaugh commented "If we're actually interested in reducing waste, just printing less – using less paper – is obviously more efficient." [290]
Times New Roman is a serif typeface. It was commissioned by the British newspaper The Times in 1931 and conceived by Stanley Morison, the artistic adviser to the British branch of the printing equipment company Monotype, in collaboration with Victor Lardent, a lettering artist in The Times's advertising department. It has become one of the most popular typefaces of all time and is installed on most personal computers.
In typography, a serif is a small line or stroke regularly attached to the end of a larger stroke in a letter or symbol within a particular font or family of fonts. A typeface or "font family" making use of serifs is called a serif typeface, and a typeface that does not include them is sans-serif. Some typography sources refer to sans-serif typefaces as "grotesque" or "Gothic" and serif typefaces as "roman".
Matthew Carter is a British type designer. A 2005 New Yorker profile described him as 'the most widely read man in the world' by considering the amount of text set in his commonly used typefaces.
In typography, italic type is a cursive font based on a stylised form of calligraphic handwriting. Along with blackletter and roman type, it served as one of the major typefaces in the history of Western typography.
Caslon is the name given to serif typefaces designed by William Caslon I in London, or inspired by his work.
Bembo is a serif typeface created by the British branch of the Monotype Corporation in 1928–1929 and most commonly used for body text. It is a member of the "old-style" of serif fonts, with its regular or roman style based on a design cut around 1495 by Francesco Griffo for Venetian printer Aldus Manutius, sometimes generically called the "Aldine roman". Bembo is named for Manutius's first publication with it, a small 1496 book by the poet and cleric Pietro Bembo. The italic is based on work by Giovanni Antonio Tagliente, a calligrapher who worked as a printer in the 1520s, after the time of Manutius and Griffo.
Claude Garamont, known commonly as Claude Garamond, was a French type designer, publisher and punch-cutter based in Paris. Garamond worked as an engraver of punches, the masters used to stamp matrices, the moulds used to cast metal type. He worked in the tradition now called old-style serif design, which produced letters with a relatively organic structure resembling handwriting with a pen but with a slightly more structured and upright design. Considered one of the leading type designers of all time, he is recognised to this day for the elegance of his typefaces. Many old-style serif typefaces are collectively known as Garamond, named after the designer.
Bookman, or Bookman Old Style, is a serif typeface. A wide, legible design that is slightly bolder than most body text faces, Bookman has been used for both display typography, for trade printing such as advertising, and less commonly for body text. In advertising use it is particularly associated with the graphic design of the 1960s and 1970s, when revivals of it were very popular.
A swash is a typographical flourish, such as an exaggerated serif, terminal, tail, entry stroke, etc., on a glyph. The use of swash characters dates back to at least the 16th century, as they can be seen in Ludovico Vicentino degli Arrighi's La Operina, which is dated 1522. As with italic type in general, they were inspired by the conventions of period handwriting. Arrighi's designs influenced designers in Italy and particularly in France.
Sabon is an old-style serif typeface designed by the German-born typographer and designer Jan Tschichold (1902–1974) in the period 1964–1967. It was released jointly by the Linotype, Monotype, and Stempel type foundries in 1967. The design of the roman is based on types by Claude Garamond, particularly a specimen printed by the Frankfurt printer Konrad Berner. Berner had married the widow of a fellow printer Jacques Sabon, the source of the face's name, who had bought some of Garamond's type after his death. The italics are based on types designed by a contemporary of Garamond's, Robert Granjon. It is effectively a Garamond revival, though a different name was chosen as many other modern typefaces already carry this name.
Centaur is a serif typeface by book and typeface designer Bruce Rogers, based on the Renaissance-period printing of Nicolas Jenson around 1470. He used it for his design of the Oxford Lectern Bible. It was given widespread release by the British branch of Monotype, paired with an italic designed by calligrapher Frederic Warde and based on the slightly later work of calligrapher and printer Ludovico Vicentino degli Arrighi. The italic has sometimes been named separately as the "Arrighi" italic.
Granjon is an old-style serif typeface designed by George W. Jones around 1924 for the British branch of the Linotype company, and based on the Garamond typeface that was used in a book printed by the Parisian Jean Poupy in 1592. The roman design was from Claude Garamond and the italic version was from Robert Granjon. Because several other Garamonds were on the market in the 1920s, Jones decided to name his type Granjon. Jones, a master printer based in London, had been engaged by Linotype to improve the quality of their typeface range through the development of revivals of notable type designs of the past.
Plantin is an old-style serif typeface. It was created in 1913 by the British Monotype Corporation for their hot metal typesetting system and is named after the sixteenth-century printer Christophe Plantin. It is loosely based on a Gros Cicero roman type cut in the 16th century by Robert Granjon held in the collection of the Plantin–Moretus Museum, Antwerp.
Robert Granjon was a French punchcutter, a designer and creator of metal type, and printer. He worked in Paris, Lyon, Antwerp, and Rome. He is best known for having introduced the typeface style Civilité, for his many italic types and his fleuron designs, although he worked across all genres of typeface and alphabet across his long career.
Les Grecs du roi are a celebrated and influential Greek alphabet typeface in the Greek minuscule style which was cut by the French punchcutter Claude Garamond between 1541 and 1550. Arthur Tilley calls the books printed from them "among the most finished specimens of typography that exist".
ITC Galliard is the name of a serif typeface designed by Matthew Carter and issued in 1978 by the Mergenthaler Linotype Company.
Ehrhardt is an old-style serif typeface released by the British branch of the Monotype Corporation in 1938. Ehrhardt is a modern adaptation of printing types of "stout Dutch character" from the Dutch Baroque tradition sold by the Ehrhardt foundry in Leipzig. These were cut by the Hungarian-Transylvanian pastor and punchcutter Miklós (Nicholas) Tótfalusi Kis while in Amsterdam in the period from 1680 to 1689.
Jean Jannon was a French Protestant printer, type designer, punchcutter and typefounder active in Sedan in the seventeenth century. He was a reasonably prolific printer by contemporary standards, printing several hundred books.
Hendrik van den Keere was a punchcutter, or cutter of punches to make metal type, who lived in Ghent in modern Belgium.
John A. Lane is an American writer and historian of printing living in the Netherlands. Lane received the 2003 Fellowship of the American Printing History Association and is particularly known for his writing on Dutch printing history and figures including Nicolaes Briot, Christoffel van Dijck and Miklós Kis.
[Quoting a letter from James Mosley]: Leading of text matter for aesthetic reasons is largely an 18th-century (and later) habit...My observations of printing in earlier centuries suggests that the founders generally cast types to fit the body very tightly, and that printers used them without leading.
{{cite book}}
: CS1 maint: location missing publisher (link)Most of these sixteenth-century types were originally cut without the letters J, U, and W, which were added in the seventeenth century.
[English] type-casters...were thrust into punch-cutting in order to make up deficiencies in founts, especially of letters like the J and U which were required in English printing...several crude versions of these letters which are found intermixed with letters of refined design, strongly suggest that the cutter had received little or no training in the art of punch-cutting.
Personally I know of no typeface which rates higher...I once told Mr. Jones that Granjon appeared to me to be fifty per cent Garamond and fifty per cent Caslon. He replied: "Your diagnosis is just about correct." Certainly he drew on sound precedents!
Garamond Premier Pro had its genesis in 1988, when Adobe senior type designer Robert Slimbach visited the Plantin-Moretus Museum in Antwerp, Belgium, to study their collection of Claude Garamond's metal punches and type designs ... While fine-tuning Adobe Garamond as a useful design suited to modern publishing, Slimbach started planning an entirely new interpretation of Garamond's designs based on the range of unique sizes he'd seen at the Plantin-Moretus, and on comparable italics cut by Garamond's contemporary, Robert Granjon.
Robert does acknowledge a major outside influence on his new Garamond ... an optical size experiment Stephen Harvard put together in 1989 ... with a lower-case Garamond "a" interpolating from a small size to a display size. Rob thought this was very interesting. But the temporal and technical constraints Rob was working with made it impractical to do anything with this idea at the time.
For the use of EB Garamond on the web Google webfonts provides an easy way to embed the font via @font-face. There you can also download a ttf version of the font. Sadly, that version is utterly outdated.
Both the Monophoto and digital versions are scandalously too light at normal text sizes.
Some of my British colleagues who worked with the original version of [Monotype] Garamond consider the digitised version much too light. It doesn't feel so to me.
I made no attempt to eliminate the mannerisms or deficiencies of his famous type, realising that they came not by intention, but rather through the punch-cutter's handling, to his lack of tools of precision and his crude materials, for he worked by eye and not by rule.
I did find it impossible to eliminate, in my own rendition of the letter, that subtle something we call 'personality' that something made up of items so intangible as practically to be imperceptible when individual types are compared, yet clearly manifest when the page they form is viewed as a whole. The subtleties ... I couldn't neglect, yet I did not consciously include them in my own drawings, and these are the touches that mark my face as belonging to the present and not to the sixteenth century.
This issue of Monotype is set in a trial font of a new version of Garamond's design ... the type ornaments, modelled on 16th century ones, will also be available.