Lancia Delta (1911)

Last updated
Lancia 20-30 HP
Overview
Manufacturer Lancia
Also calledLancia Delta
Production1911
Assembly Turin, Italy
Layout Front-engine, rear-wheel-drive
Powertrain
Engine 4,080 cc Tipo 56 I4 (petrol)
Transmission 4-speed manual
Dimensions
Wheelbase 2,740, 2,932 mm (107.9, 115.4 in)
Width1,615 mm (63.6 in)
Kerb weight 900 kg (1,984 lb)
Chronology
Predecessor Lancia 20 HP Gamma
Successor Lancia 20-30 HP Epsilon

The Lancia 20-30 HP (Tipo 56), later renamed Lancia Delta, [lower-alpha 1] is a passenger car produced by Italian car manufacturer Lancia during 1911. The Delta was based on the earlier 20 HP Gamma, with an enlarged engine. 303 Deltas were made in total, [1] before it was replaced by the improved 20-30 HP Epsilon.

Contents

The Delta was built with two wheelbases, normal and short. The latter was destined for competition-oriented Corsa models, to be bodied as open two- or three-seaters.

Specifications

The Delta was powered by a Tipo 56 side valve monobloc inline-four engine with a cast iron block. Cylinder bore measured 100 mm (3.9 in), and stroke 130 mm (5.1 in)—up 20 mm from the Gamma's Tipo 55—for a total displacement of 4,080 cc (249 cu in). [1] Output was 60 hp (45 kW) at 1800 rpm, and the car could reach top speed of 115 km/h (71 mph). [1]

The transmission was a 4-speed gearbox with a multi-plate wet clutch. The chassis was a conventional ladder frame, with solid axles sprung on semi-elliptic front and three-quarter-elliptic rear leaf springs. The brakes were on the transmission and on the rear wheels.

Notes

  1. All early Lancia models were named after their tax horsepower rating, as was common practice; when in 1919 Lancia began naming its passenger cars with Greek alphabet letters, all earlier models were posthumously renamed in order of appearance—from the 1907 Alfa to the 1913 Theta.

Related Research Articles

Lancia Delta Motor vehicle

The Lancia Delta is a small family car produced by Italian automobile manufacturer Lancia in three generations. The first generation (1979-1994) debuted at the 1979 Frankfurt Motor Show, the second generation (1993-1999) debuted at the 1993 Geneva Motor Show, and the third generation (2008-2014) debuted at 2008 Geneva Motor Show.

Fiat Tempra Small family car

The Fiat Tempra is a small family car produced by the Italian automaker Fiat from 1990 to 1996 in Italy. The Tempra was intended as a replacement for the Fiat Regata. The original project was called Tipo 3, being a mid size car between the Fiat Tipo and the bigger Fiat Croma. The Tempra shares its Type Three platform with the Lancia Dedra and Alfa Romeo 155.

Lancia Fulvia Motor vehicle

The Lancia Fulvia is an automobile produced by Lancia between 1963 and 1976. Named after Via Fulvia, the Roman road leading from Tortona to Turin, it was introduced at the Geneva Motor Show in 1963 and manufactured in three variants: Berlina 4-door saloon, 2-door Coupé, and Sport, an alternative fastback coupé designed and built by Zagato on the Coupé floorpan.

Lancia Rally 037

The Lancia Rally was a mid-engine sports car and rally car built by Lancia in the early 1980s to compete in the FIA Group B World Rally Championship. Driven by Markku Alén, Attilio Bettega, and Walter Röhrl, the car won Lancia the manufacturers' world championship in the 1983 season. It was the last rear-wheel drive car to win the WRC.

Lancia Dedra Motor vehicle

The Lancia Dedra is a compact executive car produced by the Italian automaker Lancia from 1989 to 1999. It was initially designed to support, and later to replace, the Prisma that, six years after its launch, was having difficulty remaining competitive with its latest opponents. It can be considered as the saloon version of the second generation Delta, that was launched four years later, in 1993.

Lancia Prisma Motor vehicle

The Lancia Prisma was a small family car built by Italian car manufacturer Lancia between 1982 and 1989. It was a saloon version of the first generation Lancia Delta hatchback, and like the Delta it was designed by Giorgetto Giugiaro.

Lancia Kappa Motor vehicle

The Lancia Kappa or Lancia k is a front-engine, front-drive, four-door, five passenger, left-hand drive executive sedan manufactured and marketed by Italian automaker Lancia from 1994–2000, with estate and coupé variants — sharing platforms with the Alfa Romeo 166.

Lancia Appia Motor vehicle

The Lancia Appia is a passenger car introduced in 1953 by Italian car manufacturer Lancia as a replacement for the Ardea, and which remained in production for ten years. The Appia was the last in a long line of Lancia production cars dating back to the Lancia Lambda to use sliding pillar front suspension. All three series produced had a 1089cc Lancia V4 engine.

ALFA 24 HP Motor vehicle

The ALFA 24 HP is 4.1-litre four-cylinder passenger car, the first model produced by Italian car manufacturer ALFA, which in 1919 would become Alfa Romeo. It was introduced in 1910, the year ALFA was founded, and produced until 1914 in ALFA's Portello factory near Milan. The model's name comes from its tax horsepower rating, then frequently used as vehicle designation.

Lancia Ardea Motor vehicle

The Lancia Ardea is a small family car produced by Italian car manufacturer Lancia between 1939 and 1953. Its unusually short bonnet reportedly contained the smallest V4 engine ever commercialized in a small family car.

Lancia Artena Motor vehicle

The Lancia Artena is a passenger car produced by Italian car manufacturer Lancia from 1931 until 1936, and from 1940 until 1942 chiefly for army and government use. It was powered by a 2-litre Lancia V4 engine, while chassis and factory bodies were shared with the more luxurious 2.6-litre V8-engined Lancia Astura. Total production amounted to 5,567 examples.

Lancia Epsilon Motor vehicle

The Lancia 20/30 HP, later known as Lancia Epsilon, is a passenger car produced by Italian car manufacturer Lancia between 1911 and 1912. The car was quite similar to the previous 20/30 HP Delta model. In total 357 were made.

Lancia Dikappa Motor vehicle

The Lancia Dikappa is a passenger car produced by Lancia between 1921 and 1922. It was a factory-offered sport version of the Kappa model, with overhead valves and a lighter body. 160 were made in the two years of production.

Lancia Kappa (1919) Motor vehicle

The Lancia Kappa is a passenger car produced by Lancia between 1919 and 1922. Lancia's first post-war model, it was an updated version of the earlier Theta. 1,810 were made in total, surpassing the Theta as the best-selling Lancia motor car at the time.

Lancia Trikappa Motor vehicle

The Lancia Trikappa is an automobile produced by Lancia between 1922 and 1925. It was a luxury car, the flagship of Lancia's production. The Trikappa 4.5-litre V8 is notable as the first of Lancia's narrow V engines, a distinguishing feature the manufacturer only abandoned in the 1970s. The car was offered as a bare rolling chassis, as torpedo or 6-seater coupé de ville. In total 847 were manufactured.

Lancia Gamma (1910) Motor vehicle

The Lancia 20 HP, later renamed Lancia Gamma, is a passenger car produced by the Italian car manufacturer Lancia during 1910. It was derived from a previous Beta model, now equipped with a bigger engine. In total, 258 units were built. In 1911, the type was superseded by the larger-engined and more powerful Lancia 20-30 HP Delta.

The Lancia Ro, Lancia Ro-Ro and Lancia 3Ro were 4x2 heavy trucks built by Italian manufacturer Lancia from the 1930s through the 1940s for military and civilian use. The 2-cylinder diesel Ro was produced from 1933 to 1939, the 3-cylinder diesel Ro-Ro from 1935 to 1939 and the improved 5-cylinder diesel 3Ro from 1938 to 1947.

Lancia Jota Motor vehicle

The Lancia Jota is a series of truck and bus chassis produced by Lancia between 1915 and 1935. The original 1915 Jota was the first true Lancia truck; throughout the following two decades it was made in a number of different series and variants, each identified by a progressive Greek numeral prefix added to the name, from Djota to the last Eptajota. While axle tracks, wheelbase and equipment gradually grew, the original layout and 4,940 cc four-cylinder petrol engine were retained.

The Lancia 12 HP, later known as Lancia Zeta, is a passenger car produced by Lancia between 1912 and 1914. It was intended to be Lancia's smaller offering, positioned below the 4-litre 20/30HP Delta and Epsilon models. The Zeta did not prove a success, and production is estimated at just 34 examples ; none have survived.

The Lancia 1Z was a light military truck produced by Italian manufacturer Lancia between 1912 and 1916. From a mechanical standpoint, it was closely related to the 1913 35 HP Theta passenger car. It was Lancia's first military vehicle.

References

Bibliography