The Mendocino triple junction (MTJ) is the point where the Gorda plate, the North American plate, and the Pacific plate meet, in the Pacific Ocean near Cape Mendocino in northern California. This triple junction is the location of a change in the broad tectonic plate motions which dominate the west coast of North America, linking convergence of the northern Cascadia subduction zone and translation of the southern San Andreas Fault system. [1] This region can be characterized by transform fault movement, the San Andreas also by transform strike slip movement, and the Cascadia subduction zone by a convergent plate boundary subduction movement. The Gorda plate is subducting, towards N50ºE, under the North American plate at 2.5–3 cm/yr, and is simultaneously converging obliquely against the Pacific plate at a rate of 5 cm/yr in the direction N115ºE. The accommodation of this plate configuration results in a transform boundary along the Mendocino Fracture Zone, and a divergent boundary at the Gorda Ridge. [2] [3] This area is tectonically active historically and today. The Cascadia subduction zone is capable of producing megathrust earthquakes on the order of MW 9.0.
Due to the relative plate motions, the triple junction has been migrating northwards for the past 25–30 million years, and assuming rigid plates, the geometry requires that a void, called slab window, develop southeast of the MTJ. [4] At this point, removal of the subducting Gorda lithosphere from beneath North America causes asthenospheric upwelling. [3] This instigates different tectonic processes, which include surficial uplift, crustal deformation, intense seismic activity, high heat flow, and even the extrusion of volcanic rocks. This activity is centered on the current triple junction position, but evidence for its migration is found in the geology all along the California coast, starting as far south as Los Angeles. [4]
The passage of the MTJ causes mantle material to flow into the region vacated by the Gorda plate. Once this hot mantle material is south of the triple junction, it cools, stiffens, and accretes to the adjacent lithosphere, eventually welding to it and moving along with it, analogous to the motion of a conveyor belt. [1] Lower crust-upper mantle viscous coupling plays a dominant role in converting accretionary margin materials into continent-like crust. [4] Researchers were able to demonstrate that in this 'conveyor belt' mechanism, the crust is first thickened north of the triple junction, and after passage, the crust is thinned south of the triple junction. In this way, as the MTJ migrates, there is production of a basal conveyor belt beneath North America that transports material from the south to the north. [4] This is consistent with an observed pattern of anomalous crustal structure determined by local-earthquake crustal tomography in the region. [5]
The region is dominated by Mesozoic-to-Cretaceous aged rocks which make up an uplifted subduction zone accretionary wedge called the Franciscan Complex. This unit is made of sandstones, shales, cherts, metagraywackes, melanges, as well as mafic volcanics, and is mostly metamorphosed to blueschist and eclogite facies. [4]
The spatial distribution of heat flow in the vicinity of the MTJ is similar to what would be expected in a subduction environment. That is, heat flow is low above the subducting Gorda slab, between 40 and 50 mW/m2. South of the MTJ, heat flow through the California coast is higher, around 90 mW/m2. [4] The distance south of the MTJ over which heat flow increases gives an indication of the timing of development of the heat flow anomaly. The observed surface heat flow doubles over a distance of ~200 km, corresponding to a timeframe of migration of 4–5 Ma. [4] It is also consistent with a source for the anomaly, thought to be asthenospheric mantle material, emplaced at shallow depths of 15–25 km, i.e. in the slab window. [4] This rise of the heat flow anomaly time implies that there is probably only a thin crustal lid above the slab window. [4]
The presence of hot asthenospheric mantle at shallow levels beneath the western margin of North America is likely to generate melt and cause magmatism. Accordingly, a sequence of volcanoes in the wake of the MTJ passing were activated; this magmatism likely leads to the intrusion of plutons within the overlying crust in the region.
An example of volcanic bodies that formed by magma upwelling and solidification are the Nine Sisters, located between Morro Bay and San Luis Obispo in California. The source of the material which flows into the slab window is a matter of debate, specifically whether it is derived directly from the underlying mantle, or from the mantle wedge to the east. The chemistry of erupted basalts associated with the MTJ are typical of mantle wedge–derived melts, characterized by enrichment in the large-ion lithophile elements and depletion in the high-field-strength elements. In general, mantle wedge-derived melts are relatively more hydrous, have lower viscosity and temperatures than melts derived from sub-slab mantle. [4]
Most of the seismicity near the MTJ is offshore, concentrated along the Mendocino Transform Fault. Seismicity is also distributed within the Gorda plate itself, owing to its small size, young age, and relatively thin lithosphere. Oblique convergence of the Gorda plate towards the Pacific plate causes intense north–south compression, and induces anomalously strong internal deformation in the former, giving rise to the Gorda Deformation Zone (GDZ) and resulting in abundant seismicity. [4] Motion along the Mendocino Transform Fault (MTF) is right-lateral on E–W oriented, vertically dipping planes. Within the portion of North American crust overlying the Gorda slab, motion on faults is reverse, and in April 1992, a M 7.1 earthquake ruptured the southern portion of the Cascadia subduction zone. Similar to the general seismicity patterns in the region, the majority of the aftershocks for this event had vertical strike-slip motions and were located within the Gorda plate, or on the MTF at depths between 23 and 35 km. None of the aftershocks were consistent with northeast underthrusting of the Gorda plate beneath North America, as was the case in the main event. This set of earthquake geometries implies a stress field characterized by N–NW, horizontal principal compressive stress consistent with the orientation of compression in the GDZ northwest of the MTJ. [4]
Subduction is a geological process in which the oceanic lithosphere and some continental lithosphere is recycled into the Earth's mantle at the convergent boundaries between tectonic plates. Where one tectonic plate converges with a second plate, the heavier plate dives beneath the other and sinks into the mantle. A region where this process occurs is known as a subduction zone, and its surface expression is known as an arc-trench complex. The process of subduction has created most of the Earth's continental crust. Rates of subduction are typically measured in centimeters per year, with rates of convergence as high as 11 cm/year.
A convergent boundary is an area on Earth where two or more lithospheric plates collide. One plate eventually slides beneath the other, a process known as subduction. The subduction zone can be defined by a plane where many earthquakes occur, called the Wadati–Benioff zone. These collisions happen on scales of millions to tens of millions of years and can lead to volcanism, earthquakes, orogenesis, destruction of lithosphere, and deformation. Convergent boundaries occur between oceanic-oceanic lithosphere, oceanic-continental lithosphere, and continental-continental lithosphere. The geologic features related to convergent boundaries vary depending on crust types.
The Tonga Trench is an oceanic trench located in the southwestern Pacific Ocean. It is the deepest trench in the Southern hemisphere and the second deepest on Earth after the Mariana Trench. The fastest plate-tectonic velocity on Earth is occurring at this location, as the Pacific plate is being subducted westward in the trench.
The North American plate is a tectonic plate containing most of North America, Cuba, the Bahamas, extreme northeastern Asia, and parts of Iceland and the Azores. With an area of 76 million km2 (29 million sq mi), it is the Earth's second largest tectonic plate, behind the Pacific plate.
The Farallon plate was an ancient oceanic tectonic plate. It formed one of the three main plates of Panthalassa, alongside the Izanagi plate and the Phoenix plate, which were connected by a triple junction. The Farallon plate began subducting under the west coast of the North American plate—then located in modern Utah—as Pangaea broke apart and after the formation of the Pacific plate at the center of the triple junction during the Early Jurassic. It is named for the Farallon Islands, which are located just west of San Francisco, California.
The Gorda plate, located beneath the Pacific Ocean off the coast of northern California, is one of the northern remnants of the Farallon plate. It is sometimes referred to as simply the southernmost portion of the neighboring Juan de Fuca plate, another Farallon remnant.
The Explorer plate is an oceanic tectonic plate beneath the Pacific Ocean off the west coast of Vancouver Island, Canada, which is partially subducted under the North American plate. Along with the Juan de Fuca plate and Gorda plate, the Explorer plate is a remnant of the ancient Farallon plate, which has been subducted under the North American plate. The Explorer plate separated from the Juan de Fuca plate roughly 4 million years ago. In its smoother, southern half, the average depth of the Explorer plate is roughly 2,400 metres (7,900 ft) and rises up in its northern half to a highly variable basin between 1,400 metres (4,600 ft) and 2,200 metres (7,200 ft) in depth.
Forearc is a plate tectonic term referring to a region in a subduction zone between an oceanic trench and the associated volcanic arc. Forearc regions are present along convergent margins and eponymously form 'in front of' the volcanic arcs that are characteristic of convergent plate margins. A back-arc region is the companion region behind the volcanic arc.
The Cascadia subduction zone is a 960 km (600 mi) fault at a convergent plate boundary, about 100–200 km (70–100 mi) off the Pacific coast, that stretches from northern Vancouver Island in Canada to Northern California in the United States. It is capable of producing 9.0+ magnitude earthquakes and tsunamis that could reach 30 m (98 ft). The Oregon Department of Emergency Management estimates shaking would last 5–7 minutes along the coast, with strength and intensity decreasing further from the epicenter. It is a very long, sloping subduction zone where the Explorer, Juan de Fuca, and Gorda plates move to the east and slide below the much larger mostly continental North American plate. The zone varies in width and lies offshore beginning near Cape Mendocino, Northern California, passing through Oregon and Washington, and terminating at about Vancouver Island in British Columbia.
A Wadati–Benioff zone is a planar zone of seismicity corresponding with the down-going slab in a subduction zone. Differential motion along the zone produces numerous earthquakes, the foci of which may be as deep as about 670 km (420 mi). The term was named for the two seismologists, Hugo Benioff of the California Institute of Technology and Kiyoo Wadati of the Japan Meteorological Agency, who independently discovered the zones.
Cape Mendocino, which is located approximately 200 miles (320 km) north of San Francisco, is located on the Lost Coast entirely within Humboldt County, California, United States. At 124° 24' 34" W longitude, it is the westernmost point on the coast of California. The South Cape Mendocino State Marine Reserve and Sugarloaf Island are immediately offshore, although closed to public access due to their protected status. Sugarloaf Island is cited as California's westernmost island.
The Mendocino Fracture Zone is a fracture zone and transform boundary over 4000 km long, starting off the coast of Cape Mendocino in far northern California. It runs westward from a triple junction with the San Andreas Fault and the Cascadia subduction zone to the southern end of the Gorda Ridge. It continues on west of its junction with the Gorda Ridge, as an inactive remnant section which extends for several hundred miles.
The Gorda Ridge, is a tectonic spreading center, located roughly 200 kilometres (120 mi) off the northern coast of California and southern Oregon. Running northeast to southwest, the region is roughly 300 kilometres (190 mi) in length. The ridge is broken into three segments: the northern ridge, central ridge, and the southern ridge, which includes the Escanaba Trough.
A slow earthquake is a discontinuous, earthquake-like event that releases energy over a period of hours to months, rather than the seconds to minutes characteristic of a typical earthquake. First detected using long term strain measurements, most slow earthquakes now appear to be accompanied by fluid flow and related tremor, which can be detected and approximately located using seismometer data filtered appropriately. That is, they are quiet compared to a regular earthquake, but not "silent" as described in the past.
This is a list of articles related to plate tectonics and tectonic plates.
In geology, a slab window is a gap that forms in a subducted oceanic plate when a mid-ocean ridge meets with a subduction zone and plate divergence at the ridge and convergence at the subduction zone continue, causing the ridge to be subducted. Formation of a slab window produces an area where the crust of the over-riding plate is lacking a rigid lithospheric mantle component and thus is exposed to hot asthenospheric mantle. This produces anomalous thermal, chemical and physical effects in the mantle that can dramatically change the over-riding plate by interrupting the established tectonic and magmatic regimes. In general, the data used to identify possible slab windows comes from seismic tomography and heat flow studies.
The 1992 Cape Mendocino earthquakes occurred along the Lost Coast of Northern California on April 25 and 26. The three largest events were the M7.2 thrust mainshock that struck near the unincorporated community of Petrolia midday on April 25 and two primary strike-slip aftershocks measuring 6.5 and 6.6 that followed early the next morning. The sequence encompassed both interplate and intraplate activity that was associated with the Mendocino Triple Junction, a complex system of three major faults that converge near Cape Mendocino. The total number of aftershocks that followed the events exceeded 2,000.
The 1932 Eureka earthquake occurred on June 6 at 00:44:26 local time along the northern coastal area of California in the United States. With a moment magnitude of 6.4 and a maximum Mercalli intensity of VIII (Severe), this earthquake left one person dead from a falling chimney and several injured. The shock was the largest in the area since 1923 and was felt in southern Oregon and northern California.
The Chile Ridge, also known as the Chile Rise, is a submarine oceanic ridge formed by the divergent plate boundary between the Nazca plate and the Antarctic plate. It extends from the triple junction of the Nazca, Pacific, and Antarctic plates to the Southern coast of Chile. The Chile Ridge is easy to recognize on the map, as the ridge is divided into several segmented fracture zones which are perpendicular to the ridge segments, showing an orthogonal shape toward the spreading direction. The total length of the ridge segments is about 550–600 km.