Modern Tool Company

Last updated
Modern Tool Company
Modern Tool Company Erie PA Apr 13.jpg
Modern Tool Company, April 2013
USA Pennsylvania location map.svg
Red pog.svg
Usa edcp location map.svg
Red pog.svg
LocationNE jct. of State and Fourth Sts., Erie, Pennsylvania
Coordinates 42°07′53″N80°05′12″W / 42.13139°N 80.08667°W / 42.13139; -80.08667
Area1.7 acres (0.69 ha)
Built1895-1928
ArchitectH.R. Dunning (1895 portion)
NRHP reference No. 87000382 [1]
Added to NRHPMarch 6, 1987

Modern Tool Company, also known as the People's Market House, is a historic building located at Erie, Erie County, Pennsylvania. It is a large eclectic U-shaped, brick building built in stages between 1895 and 1928. The building measures 218 feet by 330 feet. The earliest section was built in 1895, as the People's Market House. It is 3+12 stories and has a large central pavilion with flanking two-story wings and a gable roof. The State Street side was built in five sections between 1916 and 1924. The northern block was added about 1928. It features Palladian windows and a corner turret. The original building housed a public market until 1902, after which it was leased to the Modern Tool Company, a machine tool manufacturer. [2]

It was added to the National Register of Historic Places in 1987. [1]

Payne-Modern automobile

Calvin N. Payne founded Modern Tool Company in 1898. From 1904 he and his son Frank experimented with automobiles . Gilbert Loomis, who previously ran the Loomis Auto Car Company, joined Modern Tool in development of a car in 1906. However, he quickly left the company and joined the Speedwell Motor Car Company . In 1907 the production of automobiles began with the marque name of Payne-Modern. [3]

The Payne-Modern was offered as a four-cylinder or a six-cylinder; both engines were air-cooled overhead valve units built in a "V" configuration. The transmission was patented with four speeds forward and reverse. Suspension was novel with semi-elliptic springs placed at a 15-degree angle with the outboard ends above the frame, the inside ends below. There were no outside hand levers on the Payne-Modern, the gearshift lever was located on the steering wheel. Final drive was by shaft. With runabout or touring bodies, the four-cylinder was priced at $2.200 (equivalent to $71,940in 2023) while the six-cylinder was priced at $4,000, equivalent to $130,800in 2023. [3]

Likely the complexity of the automobiles hampered its production and the Payne-Modern was discontinued in 1908. [3]

It is unknown if any cars are currently extant.

Related Research Articles

The Aerocar is an American automobile that was built from 1906 until 1908 in Detroit, Michigan. Backed by Henry Ford's former partner, coal merchant Alexander Malcomson, the short-lived company offered an air-cooled four-cylinder luxury car which sold for $2,800.

<span class="mw-page-title-main">Ateliers de Construction Mecanique l'Aster</span>

L'Aster, Aster, Ateliers de Construction Mecanique l'Aster, was a French manufacturer of automobiles and the leading supplier of engines to other manufacturers from the late 1890s until circa 1910/12. Although primarily known as an engine mass manufacturer the company also produced chassis for coach-works and a complete range of components.

The Lanchester Motor Company Limited was a British car manufacturer in active trade between 1899 and 1955. Though the Lanchester Motor Company Limited is still registered as an active company and accounts are filed each year, the marque has been dormant since. As of 2014 it is marked as "non-trading".

<span class="mw-page-title-main">Knox Automobile Company</span> Former American car manufacturer

The Knox Automobile Company was a manufacturer of automobiles in Springfield, Massachusetts, United States, between 1900 and 1914. Knox also built trucks and farm tractors until 1924. They are notable for building the very first modern fire engine in 1905, and the first American vehicle with hydraulic brakes, in 1915.

<span class="mw-page-title-main">St. Louis Motor Company</span> Defunct American motor vehicle manufacturer

St. Louis Motor Carriage Company was a manufacturer of automobiles at 1211–13 North Vandeventer Avenue in St. Louis, Missouri, founded by George Preston Dorris and John L. French in 1898, with French taking charge of marketing and Dorris heading engineering and production. St. Louis Motor Carriage was the first of many St. Louis automakers and produced automobiles from 1899 to 1907.

<span class="mw-page-title-main">Stevens-Duryea</span> Defunct American motor vehicle manufacturer

Stevens-Duryea was an American manufacturer of Veteran and Brass Era automobiles in Chicopee Falls, Massachusetts, between 1901 and 1915 and Vintage Cars from 1919 to 1927.

<span class="mw-page-title-main">History of the automobile</span>

Crude ideas and designs of automobiles can be traced back to ancient and medieval times. In 1649, Hans Hautsch of Nuremberg built a clockwork-driven carriage. In 1672, a small-scale steam-powered vehicle was created; the first steam-powered automobile capable of human transportation was built by Nicolas-Joseph Cugnot in 1769. Inventors began to branch out at the start of the 19th century, creating the de Rivaz engine, one of the first internal combustion engines, and an early electric motor. Samuel Brown later tested the first industrially applied internal combustion engine in 1826. Only two of these were made.

<span class="mw-page-title-main">Rudge-Whitworth</span> British bicycle, motorcycle and sports car manufacturer

Rudge Whitworth Cycles was a British bicycle, bicycle saddle, motorcycle and sports car wheel manufacturer that resulted from the merger of two bicycle manufacturers in 1894, Whitworth Cycle Co. of Birmingham, founded by Charles Henry Pugh and his two sons Charles Vernon and John, and Rudge Cycle Co. of Coventry.

<span class="mw-page-title-main">Speedwell Motor Car Company</span> Defunct American motor vehicle manufacturer

The Speedwell Motor Car Company was a Brass Era American automobile manufacturing company established by Pierce Davies Schenck that produced cars from 1907 to 1914. The Great Dayton Flood of 1913 greatly damaged the Speedwell factory and inventory, and the company entered receivership in 1915 after having built an estimated 4,000 cars and trucks.

<span class="mw-page-title-main">Selden Motor Vehicle Company</span> Defunct American motor vehicle manufacturer

The Selden Motor Vehicle Company was a Brass Era American manufacturer of automobiles. The company, founded in 1906, was based in Rochester, New York, and built automobiles from 1907 to 1914 and trucks from 1913 to 1932.

<span class="mw-page-title-main">Marvel (automobile)</span> Defunct American motor vehicle manufacturer

The Marvel was an automobile built at 284–290 Rivard Street, Detroit, Michigan, United States, by the Marvel Motor Car Company in 1907.

<span class="mw-page-title-main">Michigan (1903 automobile)</span> Defunct American motor vehicle manufacturer

The Michigan was a brass era automobile built in Kalamazoo, Michigan by the Michigan Automobile Company, Ltd from 1903 to 1907.

<span class="mw-page-title-main">Schacht (automobile)</span> Defunct US automobile manufacturer

Schacht was an American marque of automobiles and High-wheelers from 1904 to 1913, in Cincinnati, Ohio. The Schacht Manufacturing Company, later renamed Schacht Motor Car Company produced over 9,000 automobiles. The company was reorganized as the G.A. Schacht Motor Truck Company in 1914 and production of trucks and fire trucks continued until 1938.

<span class="mw-page-title-main">Matheson (automobile)</span> Defunct American motor vehicle manufacturer

The Matheson was a luxury American automobile manufactured from 1903 to 1912, first in Grand Rapids, Michigan, then Holyoke, Massachusetts and from 1906 in a purpose-built factory in Forty Fort, Wilkes-Barre, Pennsylvania.

<span class="mw-page-title-main">Regal (automobile)</span> Defunct American motor vehicle manufacturer

The Regal was an American automobile produced by the Regal Motor Car Company of Detroit, Michigan, from 1907 to 1918.

<span class="mw-page-title-main">Mitchell (automobile)</span> Defunct American motor vehicle manufacturer

Mitchell was a major brass-era automobile marque in Racine, Wisconsin, from 1903 to 1923.

<span class="mw-page-title-main">Adolphe Clément-Bayard</span> French entrepreneur

Gustave Adolphe Clément, known from 1909 Clément-Bayard, was a French entrepreneur. Despite being orphaned, he became a blacksmith and a Compagnon du Tour de France. He later ventured into racing and manufacturing bicycles, pneumatic tyres, motorcycles, automobiles, aeroplanes and airships.

The Pierce Engine Company of Racine, Wisconsin, was the manufacturer of the brass era Pierce-Racine automobile. The company was founded in 1892 and produced automobiles from 1904 to 1910.

Two automobiles were manufactured during the Brass Era of automobiles. The earliest was the Sharp Arrow built by the Sharp Arrow Automobile Company in Trenton New Jersey from 1908 to 1910. The second was the SEM or Sharp cyclecar built by the Sharp Engineering & Manufacturing Company in Detroit, Michigan in 1914.

<span class="mw-page-title-main">Middleby Auto Company</span> Defunct American motor vehicle manufacturer

The Middleby Auto Company (1908–1913) was a brass era American automobile manufacturer, based in Reading, Pennsylvania.

References

  1. 1 2 "National Register Information System". National Register of Historic Places . National Park Service. July 9, 2010.
  2. "National Historic Landmarks & National Register of Historic Places in Pennsylvania" (Searchable database). CRGIS: Cultural Resources Geographic Information System.Note: This includes Diane P. Kraus and Jeffrey Darbee (August 1986). "National Register of Historic Places Inventory Nomination Form: Modern Tool Company" (PDF). Retrieved 2012-08-12.
  3. 1 2 3 Kimes, Beverly Rae; Clark Jr., Henry Austin (1996). Standard Catalog of American Cars 1805-1942 (3rd ed.). Krause Publications. ISBN   978-0-87341-428-9.