NZR P class (1885) | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||
|
The P class was a class of steam locomotives built to haul freight trains on the national rail network of New Zealand. The class consisted of ten individual locomotives ordered from the British company of Nasmyth, Wilson and Company in 1885, but miscommunications about the weight limitations imposed on the locomotives meant they did not start work until 1887. This debacle came at a time when the New Zealand Railways Department (NZR) was suffering from a lack of motive power to work on its rapidly expanding network and was part of what prompted a shift towards American and home-grown manufacturers.
The classification of this class as "P" was the first example of the re-use of a classification that had previously been used for an earlier class. The members of the P class of 1876 had been sold to private companies or the Public Works Department, leaving the classification unused. The Railways Department chose to assign it to this class, setting a pattern that was followed with other classes in years to come, with the most prominent example being the A class of 1906 re-using the classification of the A class of 1873.
Initially, seven of the P class locomotives were deployed in Otago, with the remaining three based in Auckland, and in 1899, the Auckland fleet expanded to four when one was transferred north from Otago. The locomotives started their lives with wooden cabs in a Gothic style, but they were later replaced with steel cabs. [1]
The P class locomotives were designed primarily for pulling freight trains. However, they were also capable of working passenger trains as required, and photographs exist of the engines occasionally pulling special excursion trains. Some changes were found necessary to obtain the best performance from them; the smokeboxes were extended, and the original Belpaire-type boilers were replaced with a new type to an NZR design.
The passenger equivalent of the P class was the V class 2-6-2 tender locomotives, which were designed primarily for express passenger work. The locomotives had boilers of similar dimensions but were not interchangeable, as well as a shared design of tender. The later P class steel cab was also adapted for use on the V class.
By 1926, all four Auckland members of the P class had been withdrawn from service, and the six southern members were retired within the next four years. Multiple members of the class are known to have been dumped in rivers to provide riverbank stability and halt erosion.[ citation needed ]
Four P class locomotives have been rescued for preservation. All were salvaged from locomotive dump sites in Otago and Southland as incomplete hulks.
In 1992, then-Dunedin based group Project Steam salvaged the remains of P 25 and P 107 from Beaumont on the former Roxburgh Branch. Both locomotives were moved to Dunedin for restoration; due to the poor condition of P 107's frame, the locomotive's frame was swapped with that from its sister locomotive. In 2009, the rolling chassis of P 107 was trucked from Dunedin to Springfield for storage at the Midland Rail Heritage Trust's centre, where the restoration will be completed. Both locomotives were dumped with their tenders and other fittings still attached, and so are more complete than other examples of the type.
In 2004, the Ohai Railway Board Heritage Trust salvaged the remains of P 60 and P 133 from the Branxholme locomotive dumpsite on the Wairio Branch. Both were moved to the group's workshop at Wairio where they were placed in outside storage. In 2014, the hulk of P 133 was moved from Wairio to Mosgiel, pending transport to Middlemarch where it will be stored pending the funding needed to restore it to working order. Both of the ORBHT engines were more heavily stripped and are missing many parts; P 60 was also dumped with the boiler of a classmate temporarily bolted on; the boiler later came apart from the frames, resulting in the salvage of the frames only.
Railway preservation in New Zealand is the preservation of historically significant facets of New Zealand's rail transport history. The earliest recorded preservation attempt took place in 1925, although the movement itself did not start properly until 1960.
The NZR K class of 1877 was the first example of American-built locomotives to be used on New Zealand's rail network. Their success coloured locomotive development in New Zealand until the end of steam.
The NZR F class was the first important class of steam locomotive built to operate on New Zealand's railway network after the national gauge of 3 ft 6 in was adopted. The first locomotives built for the new gauge railways were two E class double Fairlies for the Dunedin and Port Chalmers Railway Company. The F class was the first class ordered by the central government, and between 1872 and 1888, a total of eighty-eight members of the class were constructed.
The NZR AB class was a class of 4-6-2 Pacific tender steam locomotive that operated on New Zealand's national railway system for New Zealand Railways (NZR). Originally an improvement on the 1906 A class, 141 were built between 1915 and 1927 by NZR's Addington Workshops, A & G Price of Thames, New Zealand, and North British Locomotive Company, making the AB class the largest class of steam locomotives ever to run in New Zealand. An additional eleven were rebuilt from the tank version of the AB – the WAB class – between 1947 and 1957. Two North British-made locomotives were lost in the wreck of the SS Wiltshire in May 1922.
Locomotives of New Zealand is a complete list of all locomotive classes that operate or have operated in New Zealand's railway network. It does not include locomotives used on bush tramways.
The NZR WD class was a class of tank locomotive built by Baldwin Locomotive Works to operate on New Zealand's national rail network.
The Wellington and Manawatu Railway Trust is a charitable trust based in Wellington, New Zealand, and is actively restoring former Wellington and Manawatu Railway locomotive No.9, to full working order.
The New Zealand E class locomotive comprised a single Mallet steam locomotive operated by New Zealand Railways (NZR) from 1906 until 1917. Classified as E 66 and nicknamed Pearson's Dream after its designer, it was an experimental Mallet locomotive designed to work on the Rimutaka Incline. The "E" classification was previously used by the Double Fairlie E class of 1872-75, but the classification was free as they had all been withdrawn by the time E 66 entered service. After the withdrawal of E 66, "E" was again re-used on the battery-electric E class of 1922. It was the only Mallet locomotive to operate for the NZR
The NZR B class of 1899 was a class of steam locomotives that operated on New Zealand's national rail network. An earlier B class of Double Fairlies had entered service in 1874, but as they had departed from the ownership of the New Zealand Railways (NZR) by the end of 1896, the B classification was free to be re-used. Despite early difficulties, they were amongst NZR's most influential designs.
The BA class was a class of steam locomotive built by the New Zealand Railways Department (NZR) for use on New Zealand's national rail network. The first BA entered service in November 1911, with the last of the 11 class members introduced on 14 May 1913.
The NZR C class consisted of twenty-four steam locomotives built to perform shunting duties on New Zealand's national rail network. It is sometimes known as the big C class to differentiate it from the C class of 1873.
The NZR JA class was a class of fifty-one 4-8-2 steam locomotives operated by the New Zealand Railways Department (NZR). The locomotives were built in two batches; the first batch was constructed at the Hillside Workshops at Dunedin between 1946 and 1956, while the second batch was constructed by the North British Locomotive Company (NBL) of Glasgow, Scotland in 1951. To differentiate between the two batches, the locomotives were identified by their builder.
The NZR G class was a type of Garratt locomotives used in New Zealand, later rebuilt as Pacific type locomotives. They were the only Garratt type steam locomotives ever used by the New Zealand Railways (NZR). They were ordered to deal with traffic growth over the heavy gradients of the North Island Main Trunk (NIMT) and to do away with the use of banking engines on steep grades. They were one of the few Garratt designs to employ six cylinders. A mechanical stoker was used to feed coal into the locomotive. The locomotives lasted longer in rebuilt form as standard Pacific locomotives than they did as Garratts, but their numerous mechanical issues lead to their final withdrawal following a union ban on their use in 1956.
The NZR J class was a class of forty 4-8-2 steam locomotives operated by the New Zealand Railways Department (NZR). Although designed to work on the lighter secondary lines, the class was frequently used on mainline express passenger trains as well as freight. When first introduced, the class boasted distinctive streamlining, which was later removed from 1947 onwards for maintenance reasons. Three of this class remained in service until the end of steam operation on 26 October 1971, when they were withdrawn and entered into preservation. This class should not be confused with the earlier J class from 1874.
The New Zealand V class steam locomotive was used on New Zealand's railway network from 1885 onwards. They were operated by New Zealand Government Railways and the Wellington and Manawatu Railway Company.
Branxholme locomotive dump is a steam locomotive and wagon dump located on the eastern bank of the Ōreti River adjacent and just to the north of Southland's Wairio Branch Line in New Zealand. Locomotives and rolling stock have been dumped here for river protection since the 1920s. In the time since numerous items have been recovered for preservation purposes.
The NZR U class, the first tender locomotives built in New Zealand, were a class of 4-6-0 Ten Wheeler locomotive designed to the requirements of Mr T. F. Rotherham and built at NZR Addington between 1894 and 1903. They were amongst NZRs' longest lived tender engines.
The NZR UA class were a class of 4-6-0 Ten Wheeler locomotive built by the Scottish firm of Sharp Stewart and Company to ease a motive power shortage. They lived relatively short lives amongst NZR ten wheelers, mostly at the southern end of the country where they were seldom photographed.
The NZR UC class were a group of ten 4-6-0 steam locomotives obtained from Scottish builders Sharp, Stewart and Company for New Zealand Railways (NZR). Essentially they were developments of the firm's previous batch of 4-6-0s' for NZR.
The NZR WW class was a class of 4-6-4T tank locomotives that operated on the New Zealand national railway network. They were built for New Zealand Railways Department (NZR), and were the final development of the six-coupled tank engine in New Zealand, the penultimate class of tank locomotives to be built for NZR, and the first class of tank locomotives to be built with superheaters.