Nechacco

Last updated
Nechacco on Nechako River 1909.gif
Nechacco on the Nechako River 1909
History
Canadian Red Ensign (1868-1921).svg Canada
NameNechacco
BuilderDonald McPhee
Laid down1909
LaunchedMay 25, 1909 at Quesnel, British Columbia
In service1909-1921
Renamedre-registered as Chilco 1910
FateTore apart in ice jam at the Cottonwood Canyon, April 1911
General characteristics
Length80 ft (24.4 m)
Beam16.4 ft (5.0 m)
NotesNo. 126512

The Nechacco sternwheeler was built for service on the Soda Creek to Fort George route on the upper Fraser River in British Columbia. She was owned by the Fort George Lumber and Navigation Company. The partners in this company were Nick Clark and Russel Peden of South Fort George, who operated a sawmill there. Nick Clark also owned the lots in that townsite and was offering them up for sale. The new steamer was intended to bring prospective property buyers to Fort George and to furnish them with supplies.

Contents

1909

The Nechacco was built by Donald McPhee and was launched in Quesnel on May 25, 1909. In her first year of service she was piloted by Captain John Bonser, an experienced swift-water pilot from the Skeena and Yukon Rivers. Under his direction, the Nechacco completed several difficult and history making trips. She was the first sternwheeler to reach Fort George from Quesnel, arriving on May 30, barely nudging the Charlotte out of the honor, and the first to ever navigate through the fearsome Grand Canyon of the Fraser, 104 miles upriver from Fort George. She was also the only sternwheeler to follow in the footsteps of the pioneer ship Enterprise and make the trip to Takla Landing on Takla Lake, as well as the first steamer to take the Nechako River all the way to Stoney Creek. The Nechacco was often chartered by pioneer surveyor Frank Swannell whose survey work took him far and wide along many of the local rivers from 1908 until 1914. [1]

Despite such a prestigious start, she was destined to have the most dramatic end of all the upper Fraser sternwheelers.

1910

Chilco (1910) John and Ida Bonser at upper left Chilco.gif
Chilco (1910) John and Ida Bonser at upper left

In 1910, the Nechacco had been re-registered as the Chilco and was piloted for the first part of the season by Captain Bonser and the latter part by Captain George Ritchie. Late in November, she was on her way back from Soda Creek with South Fort George's winter food supplies and had just passed the Cottonwood Canyon when she hit a reef and sank. The river was nearing freeze up and nothing could be done at that time to salvage her, so the cargo was removed and taken down to Quesnel. Upon hearing of the wreck, one of the Chilco's owners, Russell Peden, and South Fort George hotelier, Al Johnson, immediately snow-shoed down to Quesnel to petition Captain Browne, who was then master of the BX , to make one last trip upriver with the much needed supplies. Browne consented and the supplies were delivered without incident, although ice had already begun to form along the shoreline.

1911

In March 1911, Captain Ritchie returned to the Chilco with his crew and began the salvage operations and temporary repairs that were necessary to get her back to Quesnel where she could be properly made ready for the season. In late April, Ritchie decided that the river was clear and started the trip downstream to Quesnel. Upon entering the head of the Cottonwood Canyon, he saw that the foot of the canyon was blocked solid with ice. The Chilco was rapidly speeding towards the deadly obstacle and it was too late to turn back. The captain and the crew escaped to the shore on the lifeboat and there were no injuries or loss of life. (Other reports were made in the local paper, then the Fort George Herald, that the escape was made onto the ice). Nonetheless, the end result was the same, the crew survived, but the Chilco did not. She was torn apart in the icy waters and not one piece of her was ever recovered. [2]

See also

Notes

  1. Sherwood, Jay (2004). Surveying Northern British Columbia. Caitlin Press. pp.  25–27. ISBN   1-894759-05-2.
  2. Downs, Art (1971). Paddlewheels on the Frontier Volume 1. Foremost Publishing. ISBN   0-88826-033-4.

Related Research Articles

<span class="mw-page-title-main">Barnard's Express</span> Transport company

Barnard's Express, later known as the British Columbia Express Company or BX, was a pioneer transportation company that served the Cariboo and Fraser-Fort George regions in British Columbia, Canada from 1861 until 1921.

Soda Creek is a rural subdivision 38 km north of Williams Lake in British Columbia, Canada. Located on the east bank of the Fraser River, Soda Creek was originally the home of the Xat'sull First Nation. Soda Creek Indian Reserve No. 1 is located on the left (E) bank of the Fraser River, one mile south of the Soda Creek BCR (CN) station, 431.10 ha. 52°19′00″N122°16′00″W

<span class="mw-page-title-main">Steamboats of the Upper Fraser River</span>

Twelve paddlewheel steamboats plied the upper Fraser River in British Columbia from 1863 until 1921. They were used for a variety of purposes: working on railroad construction, delivering mail, promoting real estate in infant townsites and bringing settlers in to a new frontier. They served the towns of Quesnel, Barkerville and Fort George. Some only worked the Fraser from Soda Creek to Quesnel, while others went all the way to Tête Jaune Cache or took the Nechako River and served Fort Fraser and beyond.

<span class="mw-page-title-main">Owen Forrester Browne</span>

Owen Forrester Browne was a paddle steamer captain in British Columbia, and Alberta, Canada. He was born in New Westminster and worked on the lower Fraser and Yukon River sternwheelers before coming to the upper Fraser River in the early 1900s.

<span class="mw-page-title-main">Steamboats of the Skeena River</span>

The Skeena River is British Columbia’s fastest flowing waterway, often rising as much as 17 feet (5.2 m) in a day and fluctuating as much as sixty feet between high and low water. For the steamboat captains, that wide range made it one of the toughest navigable rivers in British Columbia. Nevertheless, at least sixteen paddlewheel steamboats plied the Skeena River from the coast to Hazelton from 1864 to 1912.

<i>Enterprise</i> (1863) Mid-19th Century British Columbian Sternwheeler

The Enterprise was a passenger and freight sternwheeler that was built for service on the Soda Creek to Quesnel route on the upper Fraser River in British Columbia. It was built at Four Mile Creek near Alexandria by pioneer shipbuilder James Trahey of Victoria for Gustavus Blin Wright and Captain Thomas Wright and was put into service in the spring of 1863. Her captain was JW Doane. The Enterprise was the first of twelve sternwheelers that would work on this section of the Fraser from 1863 to 1921. Though she wasn’t large, she was a wonderful example of the early craft of shipbuilding. All of the lumber she was built from was cut by hand and her boiler and engines had been brought to the building site at Four Mile packed by mule via the wagon road from Port Douglas, 300 miles away.

Victoria was a passenger and freight sternwheeler that was built for service on the Soda Creek to Quesnel route on the upper Fraser River in British Columbia. She was built at Quesnel by pioneer shipbuilder James Trahey of Victoria for Gustavus Blin-Wright and Captain Thomas Wright and was put into service in the spring of 1869 to augment the service of Enterprise also built by Trahey for the Wrights. Although the Victoria's hull was new, her engines and boiler had originally been in the Prince of Wales from Lillooet Lake.

<i>Charlotte</i> (sternwheeler)

The Charlotte sternwheeler was built in 1896 by Alexander Watson for the Northern British Columbia Navigation Company. The partners of the NBCNC were Stephen Tingley, Senator James Reid and John Irving. She was launched on August 3, 1896 and christened by James Reid's wife after whom she'd been named.

<i>Quesnel</i> (sternwheeler)

Quesnel was a sternwheeler first launched in May 1909 at Quesnel, British Columbia to serve the Soda Creek to Fort George route of the upper Fraser River.

<i>Fort Fraser</i> (sternwheeler)

The Fort Fraser was a small sternwheeler owned by the Fort George Lumber and Transportation Company a partnership originally held by Nick Clarke and Russell Peden from the Fort George town-site of South Fort George. The Fort Fraser was intended to be a small prospecting craft that could service not only the Soda Creek to Fort George section of the upper Fraser River but also the Nechako River and some of its tributaries, enabling her to serve her namesake town of Fort Fraser.

<i>Chilcotin</i> (sternwheeler)

The sternwheeler Chilcotin was built for the Soda Creek to Fort George route of the upper Fraser River. She was built by shipbuilder Donald McPhee for the Fort George Lumber and Navigation Company, which was a partnership held by Nick Clarke and Russell Peden of the South Fort George town-site of Fort George. Chilcotin was the largest of the company's three sternwheelers and was intended to run as competition against the BC Express Company's new luxury sternwheeler, BX. Chilcotin had main, promenade and Texas decks, hot and cold running water and stateroom accommodation for fifty.

<i>Conveyor</i> (sternwheeler) Sternwheeler for Skeena River in Canada

The Conveyor was one of five sternwheelers built for the use on the Skeena River by Foley, Welch and Stewart for construction work on the Grand Trunk Pacific Railway. The other four were the Operator, the Skeena, the Distributor and the Omineca. Three of these, the Conveyor, the Operator and the Distributor were built at Victoria, British Columbia in 1908 by Alexander Watson Jr.

<i>BX</i> (sternwheeler) Boat owned by Barnards Express

The BX sternwheeler was the first of two river steamers built for service on the upper Fraser River by the BC Express Company during the busy era of Grand Trunk Pacific Railway construction. The BX was built at Soda Creek in early 1910 by Alexander Watson Jr, of Victoria, who was one of British Columbia's foremost shipbuilders and the son of the man who had built the Charlotte. The BC Express Company also hired Captain Owen Forrester Browne to be the master of the BX as he was the most experienced upper Fraser River pilot.

<i>Operator</i> (sternwheeler)

The Operator sternwheeler was one of five sternwheelers built for the use on the Skeena River by Foley, Welch and Stewart for construction work on the Grand Trunk Pacific Railway. The other four were the Conveyor, the Skeena, the Distributor and the Omineca. Three of these, the Conveyor, the Operator and the Distributor were built at Victoria, British Columbia, in 1908 by Alexander Watson Jr.

<i>BC Express</i> (sternwheeler)

The BC Express was a stern wheel paddle steamer (sternwheeler) that operated on the Fraser River in British Columbia, Canada, from 1912 to 1919. The BC Express was built for the BC Express Company by Alexander Watson, Jr to work on the upper Fraser River between Tête Jaune Cache and Fort George during the busy years of Grand Trunk Pacific Railway construction. The BC Express Company hired Captain Joseph Bucey, an experienced Skeena River pilot, to be her master.

<span class="mw-page-title-main">Gustavus Blin Wright</span>

Gustavus Blin Wright was a pioneer roadbuilder and entrepreneur in British Columbia, Canada. His biggest achievement was building the Old Cariboo Road to the Cariboo gold fields, from Lillooet to Fort Alexandria, but he was also a partner in a freighting firm that operated on the Douglas Road, he ran a toll bridge at Bridge River, near Lillooet, and built part of the road from Quesnel to Barkerville. He was also the original owner of the town of 70 Mile House.

<i>Skeena</i> (sternwheeler)

The Skeena sternwheeler was one of five sternwheelers built for the use on the Skeena River by Foley, Welch and Stewart for construction work on the Grand Trunk Pacific Railway from 1909 until 1911. She was built at Robertson's yard in Coal Harbour, Vancouver, in 1908. The other four were the Conveyor, the Operator, the Distributor and the Omineca. Three of these, the Conveyor, the Operator and the Distributor were built at Victoria, British Columbia in 1908 by Alexander Watson Jr.

<span class="mw-page-title-main">John Bonser (steamship captain)</span>

John Henry Bonser (1855-1913) was a steamship captain from Oregon, United States and British Columbia, Canada. He piloted dozens of sternwheelers over his 40-year-long career and pioneered many rivers in the Pacific Northwest.

<span class="mw-page-title-main">South Fort George</span> Suburb in canada

South Fort George is a suburb of Prince George, British Columbia, Canada.

<i>Inlander</i> Ship

The Inlander was a sternwheeler that worked on the Skeena River in British Columbia, Canada, from 1910 until 1912. She was owned by the Prince Rupert and Skeena River Navigation Company which was a syndicate of Skeena River businessmen who planned to use the Inlander as a passenger and freight steamer during the busy years of Grand Trunk Pacific Railway construction.

References

53°07′53″N122°40′08″W / 53.1315°N 122.6690°W / 53.1315; -122.6690