Industry | Automotive |
---|---|
Founded | 1926 |
Defunct | 1941 |
Fate | Merged |
Headquarters |
|
Products | Delivery trucks |
Owner |
|
The Pak-Age-Car Corporation (originally Pac-Kar) was a Chicago-based company building a small walk-in delivery van from 1926 until 1941. The truck was designed to replicate what a horse-drawn delivery carriage could do, and looked a little like a horse-drawn wagon without the animal. The company belonged to the Mechanical Manufacturing Company of Chicago, and from 1927 on they were distributed through the Stutz dealer network.
Stutz Motor Company took over the company wholesale in 1932, hoping that the truck would save the failing company. The Pak-Age-Car company was not enough for Stutz to pin their hopes on. [1] After Stutz's bankruptcy Auburn Central Company took over the Pak-Age-Car rights in 1938, moving the production line to their underutilized plant in Connersville, Indiana. Within a year, Auburn transferred the sales and service to Diamond T while retaining the Pak-Age-Car manufacture. With Auburn Central Company as well as Diamond T focusing on wartime production, Pak-Age-Car manufacture was halted for good in 1941.
Of the circa 3,500 built, only about ten Pak-Age-Cars are thought still to exist. [2] Six are Stutz-made ones and the remaining four Diamond Ts. Working vehicles generally do not survive at the same ratio as passenger vehicles, and being built in an age before mechanical cooling systems Pak-Age-Cars delivering perishables were usually packed with ice to keep them cool. As a result of the melting ice, they quickly rusted away from the inside out. [3]
The concept was developed by two men named Oldfield and Rollston, both of Chicago, with the intent of providing a direct replacement for the horse. [4] As late as 1933, Stutz's marketing material still contained a direct comparison with the horse. [5] The first prototype was called the Pac-Kar, and was finished in 1925. Production commenced in 1926, on a small scale, but with very little financial backing the company did not build many vehicles in spite of continuous improvement and development. The company building these trucks changed names repeatedly, starting out as the Package Car Corporation, becoming the Mechanical Manufacturing Company, and finally Northern Motors, Inc. [4] Several of these firms had connections with the Swift meatpacking empire, likely aiding the company in moving inventory. [4]
The original version was narrow, with a cab 52 inches (130 cm) wide and a completely flat front end. The driver stood, there being no seat, and could exit either side of the doorless cab for speedy deliveries. Brakes, clutch, and throttle were all hand operated, with levers either side of the cab. The very square body was of a frameless steel and wood sandwich construction and sat on a 92+1⁄2 in (2,350 mm) wheelbase, with the front wheels projecting about halfway in front of the cabin. The engine was a 7-horsepower horizontally opposed two-cylinder made by the Hercules Engine Company. The entire drivetrain was designed as a quickly removable module for ease of repair. The manufacturer said it took only 15 minutes to swap the drivetrain package; this could be carried out with no effect on the payload. [3]
Stutz sales were stagnant through the 1920s; picking up the Pak-Age-Car distribution in 1927 added some much-needed business. Stutz sales collapsed entirely with the Depression and in an effort to stay afloat, on 15 November 1932 Stutz took a controlling interest in the troubled Pak-Age-Car company and promptly moved the manufacture to their Indianapolis plant, with manufacture beginning by March 1933. These were redesigned by Stutz: sitting on a 90 in (2,290 mm) wheelbase the sheet metal received rounded corners, it enclosed the rear wheels, and the front edge of the roof tapered down somewhat. The hand controls remained and the front wheels still acted in lieu of a front bumper. [6] The overall effect was still that of a box with wheels. [7] Instead of the early two-cylinder, the first Stutz Pak-Age-Car was now equipped with American Austin four-cylinder, 747 cc (45.6 cu in) engines (a change which may have taken place as early as 1930) and also facelifted. In January 1935, Stutz announced that they would no longer build passenger cars, focusing their efforts entirely on the Pak-Age-Car. [8]
Stutz believed it possible, even announcing new hiring in November 1935 to meet anticipated demand for the Pak-Age-Car. [9] They also redesigned and reengineered it for the 1936 model year, giving it a new, more conventional look with a V-shaped front with a split windshield and attached front fenders. The engine, still in a convenient module, was switched to a four-cylinder Hercules IXA unit of 113.1 cu in (1853 cc). [10] Weight for the new Model 90 was up from the original 1,800 to 2,650 lb (820 to 1,200 kg), with payload ranging from 2,000 to 3,600 lb (910 to 1,630 kg). [11] The new design also offered the option of sliding side doors as well as different rear door layouts. Stutz also presented a long-wheelbase version at the 1936 National Bakers' Conference. [9] The wheelbase was extended to 116 in (2,950 mm) and the provision of a driver's seat was made. [9]
On May 3, 1936, Stutz announced that ex-Marmon man George H. Freers was the Package Car Company's new Chief Engineer. [3] His tenure was not long, as Stutz filed for bankruptcy in April 1937. With firm orders for over 400 vehicles and decent prospects for more, company management hoped that the Pak-Age-Car would be able to save the company. The courts disagreed, and liquidation plans were offered in August 1937. [11] With the court's permission, another 100 Pak-Age-Cars were finished that November to fill standing orders. There were plans to form a new, separate company to continue manufacture in the old Stutz premises, but they came to nought. [11] The rights to the Pak-Age-Car then reverted to Northern Motors of Chicago, who sold the company to Auburn in August 1938, transferring the rights and the tooling to Indiana. Stutz was liquidated in April 1939.
On August 25, 1938 the new Pak-Age-Car Corporation was formed by Auburn Central Manufacturing Corporation — what remained of the A-C-D empire. Auburn's vice-president, Roy H. Faulkner, was the president of the new company. [3] After their own recent bankruptcy, Auburn did not have any sales network left to speak of, and in March 1939 they announced that service and distribution of the Pak-Age-Car would henceforth be carried out by Diamond T while the manufacture remained in their Connersville plant. [11] [12] The Auburn Central Manufacturing Corporation took over the Pak-Age-Car trademark in December 1938, stating that the company was in the business of manufacturing vehicles, excluding engines. [13]
Production had recommenced on October 15, 1938, along with some minor changes, including a switch to engines made by Auburn-owned Lycoming. [3] [14] These were the 220.89 cu in (3620 cc)30 hp (22 kW) CT type L-head engine, although some sources indicate that the DC type was fitted. The rear axle was from the Columbia Axle Company, another Auburn subsidiary. The two wheelbases offered remained as before, and the Auburn-made cars can easily be recognized by having rounded corners and distinct rubber gaskets on the windshields. The Auburn-made cars also have different steel wheels with slightly larger hubcaps. They were marketed as the Model 91 and Model 117, respectively.
Some period spare parts brochures list the Pak-Age-Car as having been available until 1946, [15] but most sources do not support this. With Auburn converting their plant to focus on building Jeep bodies and B-24 Liberator wings for the war effort, Pak-Age-Car production was discontinued in March 1941. [10] [11]
The REO Motor Car Company was a company based in Lansing, Michigan, which produced automobiles and trucks from 1905 to 1975. At one point, the company also manufactured buses on its truck platforms.
The Pierce-Arrow Motor Car Company was an American motor vehicle manufacturer based in Buffalo, New York, which was active from 1901 to 1938. Although best known for its expensive luxury cars, Pierce-Arrow also manufactured commercial trucks, fire trucks, boats, camp trailers, motorcycles, and bicycles.
Crosley was a small, independent American manufacturer of subcompact cars, bordering on microcars. At first called the Crosley Corporation and later Crosley Motors Incorporated, the Cincinnati, Ohio, firm was active from 1939 to 1952, interrupted by World War II production. Their station wagons were the most popular model, but also offered were sedans, pickups, convertibles, a sports car, and even a tiny jeep-like vehicle. For export, the cars were badged Crosmobile.
Checker Motors Corporation was a Kalamazoo, Michigan, vehicle manufacturer and tier-one subcontractor that manufactured taxicabs used by Checker Taxi. Morris Markin established the company in 1922, initially named the Checker Cab Manufacturing Company, in Chicago through a merger of Commonwealth Motors and Markin Automobile Body. The manufacturer moved to Kalamazoo in 1923 and was renamed to Checker Motors in 1958.
The Jeep Gladiator, Jeep Pickup or J-series is a series of full-size pickup trucks based on the large Jeep SJ (Wagoneer) platform, which was built and sold under numerous marques from 1962 until 1988. The Jeep Gladiator/Pickup design is noteworthy for remaining in production for more than 26 years on a single automobile platform generation. The Gladiator was the basis of the first post-war U.S. Army trucks designed to be civilian vehicles and adapted to military use. Numerous versions of the Jeep pickup were built in other markets, including Mexico by Vehículos Automotores Mexicanos (VAM) and Argentina by Industrias Kaiser Argentina (IKA).
The Stutz Bearcat was an American sports car of the pre– and post–World War I period.
The Toyota G1 was the first truck built by the company that became Toyota. It was 6 m (20 ft) long, could carry 1.5 tons, and was loosely based on similar class Ford and GM trucks.
The Stutz Motor Car Company was an American producer of high-end sports and luxury cars based in Indianapolis, Indiana. Production began in 1911 and ended in 1935.
Seddon Atkinson Vehicles Limited, a manufacturer of large goods vehicles based in Oldham, Greater Manchester, England, was formed after the acquisition in 1970 of Atkinson Vehicles Limited of Preston by Seddon Diesel Vehicles Limited of Oldham. In 1974, the firm was acquired by International Harvester, which sold it in March 1984 to the Spanish group Enasa which made it a subsidiary of Pegaso. In 1990, it became part of Iveco which used the brand for various types of specialised vehicles in the United Kingdom. The range of models produced included EuroMover, Pacer and Strato, which are aimed at refuse collection, recycling and construction operators.
Albion Motors was a Scottish automobile and commercial vehicle manufacturer.
The Premier Motor Manufacturing Company built the brass era and vintage Premier luxury automobile in Indianapolis, Indiana, from 1903 to 1925.
The Lexington was an automobile manufactured in Connersville, Indiana, from 1910 to 1927. From the beginning, Lexingtons, like most other Indiana-built automobiles, were assembled cars, built with components from many different suppliers. The Thoroughbred Six and Minute Man Six were popular Lexington models.
McFarlan was a luxury American automobile manufactured in Connersville, Indiana, from 1909 to 1928, by the McFarlan Carriage Company and the McFarlan Motor Car Company.
Fiat Chrysler Australia, officially FCA Australia, is the official Stellantis subsidiary in that country, operating as distributor of Chrysler, Jeep, Dodge, Abarth, Alfa Romeo and Fiat vehicles. However, there had previously been a "Chrysler Australia Ltd" which had operated as a vehicle manufacturer in Australia from 1951 until 1980, and was subsequently taken over by Mitsubishi Motors Australia.
The Marion was an automobile produced by the Marion Motor Car Company in Indianapolis, Indiana from 1904 to 1915.
The Diamond T Company was an American automobile and truck manufacturer. They produced commercial and military trucks.
The Success Automobile Manufacturing Company was a brass era United States automobile manufacturer, located at 532 De Ballviere Avenue, St. Louis, Missouri, in 1906.
Multi-stop trucks are a type of light-duty and medium-duty truck created for local deliveries to residences and businesses. They are designed to be driven either sitting down or standing up, and often provide easy access between the driver and goods, hence the name "walk-in delivery" van. They are taller than full-size vans, such as the Ford Econoline, Dodge A-Series/B-Series/Ram Vans, and Chevrolet G-Series vans, but can have wheelbases that are shorter than these models or longer.
The Toyota FA and BA were heavy duty trucks introduced in February 1954. They were facelifted versions of the earlier BX/FX trucks, retaining those trucks Type B and Type F six-cylinder petrol engines. The first letter in the model name indicates the engine family fitted; in 1957 the Type D diesel engine was introduced in a model known as the DA. The second letter indicated the size of the truck, with shorter medium duty versions being coded BC/FC/DC. A second letter "B" was used on bus versions of this chassis. A second generation FA/DA was introduced in 1964 and was built in Japan until 1980, when Hino replaced Toyota's heavier truck lines entirely. The DA, however, was also built in numerous other countries and manufacture continued into the first decade of the 21st century.