SA103, SA106, SA135 [1] [2] [3] | |
---|---|
Stock type | diesel multiple unit |
Manufacturer | Pesa Bydgoszcz Mińsk Mazowiecki Railway Repair Plant |
Assembly | Poland |
Constructed | 2001–2016 |
Number built | 56 |
Capacity | about 60 seating places |
Specifications | |
Train length | 24,500 mm (80.4 ft) |
Width | 2,890 mm (9.48 ft) |
Height | 4,135 mm (13.566 ft) or 4,085 mm (13.402 ft) |
Platform height | 570 mm (1.87 ft) |
Wheel diameter | 840 mm (2.76 ft) |
Maximum speed | 120 km/h (75 mph) |
Engine type | diesel engine |
The Pesa 214M is a family of standard-gauge diesel railcars produced by Pesa Bydgoszcz between 2001 and 2016, intended for regional transport on non-electrified lines. The family includes: 214M (SA106), 214Ma (SA103), and 214Mb (SA135). A total of 56 units were produced, which are operated by Arriva (13 units), Koleje Dolnośląskie (10 units), Masovian Railways (7 units), and Polregio (26 units).
By the mid-90s, Polish State Railways owned 6 railbuses produced by Kolzam in Racibórz (SN81 and SA104 ) and 6 by Poznań Railway Repair Plant (SA101 and SA102). [4]
In the 90s, Polish State Railways planned several purchases of rolling stock: 16 Pendolino trainsets, 50 electric locomotives, and several hundred railbuses for local connections. [5] None of these purchases were realized. [6] [7] In light of these plans, Kolzam and Poznań Railway Repair Plant, the only railbus manufacturers in Poland at that time, [4] made some preparations. Kolzam, for instance, developed the design of a three-section railbus based on the SA104 , which never went into service. [8]
The enactment of the 2000 Polish State Railways Restructuring Act changed the financing of regional transport, creating Przewozy Regionalne and obliging local governments to allocate part of their funds for rolling stock purchases. [8]
Given the rolling stock situation of the Polish railways, the transforming Rail Rolling Stock Repair Workshop in Bydgoszcz aimed to develop new rail vehicles and decided to produce a diesel railcar using their own funds. [9]
In 2000, Rail Rolling Stock Repair Workshop in Bydgoszcz proposed developing a comprehensive new vehicle project to an informal design group D7, which had previously designed several equipment components for the Rail Rolling Stock Repair Workshop. [10] [11] The designers accepted the proposal and began the actual work in January 2001. [11] The main designers were Marek Adamczewski , Bogumiła Jóźwicka, Jarosław Szymański, and Marek Średniawa, collaborating with Magdalena Berlińska, Rafał Dętkoś, Paweł Gełesz, Adam Szczepocki, Michał Mirski, Tomasz Kwiatkowski, and Piotr Mikołajczak. [10] Construction of the railcar also began in January, [12] with the prototype scheduled to be showcased 9 months later [11] at the Trako fair , [13] leading to simultaneous design and production efforts. [10] Initially, the external form was developed based on competitive solutions, potential user requirements, and production capabilities. Subsequently, the interior layout was designed, and a full-scale cab mock-up was built for ergonomic studies, [11] involving Studio 1:1. [14]
The prototype diesel railcar, offered under the trade name Partner, was presented as planned in mid-October 2001 at the Trako fair in Oliwa by Pesa Bydgoszcz. [13] Following the event, promotional shows were organized in various Polish cities to attract local governments' interest in the new regional rail solution. [15] From 10 to 12 May 2002, test runs were conducted by the Railway Scientific and Technical Centre. [16]
The vehicles from the 214M family were classified as railbuses when assigning Polish State Railways series, despite similar vehicles previously being classified as diesel railcars. [19]
The base type 214M vehicles were assigned the series SA106, even though there were no vehicles classified under the SA103 series at that time. [17] In subsequent years, the series numbers from SA107 to SA110 were used up, exhausting the allocation for railbuses within the diesel railcar designation system. [17] [19] When the 214Ma subtype was produced, it was decided to assign it the previously unused SA103 series. [17] Later Pesa diesel vehicles (from the Pesa 218M family) received numbers from SA131 to SA134, starting from the lowest number not designated by the standard. [19] The 214Mb subtype was designated as SA135. [19]
The 214M family of diesel railcars are single-space vehicles powered by diesel engines. Some design solutions from the 120A railroad car were used in their construction. [17] The railcar's dimensions are 24.5 m in length, 2.89 m in width, and 4.135 m or 4.084 m (Masovian Railways version) in height. The service weight of the railcars ranges from 52 to 62 t. The first produced railcar, weighing 52 t, was the lightest [1] [2] and matched the initial design specifications for the 214Mx vehicles. [20]
The 214M family vehicles have one diesel engine connected to a hydrodynamic transmission. The drive unit is linked by a drive shaft to an intermediate axle gearbox on the first wheelset of the powered bogie. Through another shaft, power is transmitted from the intermediate axle gearbox to the final axle gearbox on the second wheelset of the powered bogie. [21] [22]
Multiple traction is possible for up to 3 vehicles, [22] including those from the 218M family. [23] The 214Mx models were equipped with engines producing from 350 to 390 kW or 500 kW. [1] The SA106 series, due to its powerful 500 kW engine, can pull an additional wagon, such as the Pesa 401M (SA123) designed for this purpose, but it cannot provide interior heating for the additional wagon. [3] Vehicles with less powerful engines are more economical but struggle on steep gradients. [1] The manufacturer claims the vehicle is comfortable to operate, featuring an ergonomic driver’s cab and cruise control. [3] The 214M is equipped with a vehicle control and diagnostics system. [3]
The first 214Mx (SA106-001) was fitted with a MAN engine, subsequent SA106 units received Iveco engines, and SA103 and SA135 units were equipped with MTU engines. The SA106 vehicles have a hydraulic transmission from Voith, while the SA103 and SA135 models use a hydromechanical transmission from ZF. [1]
Each 214Mx runs on two two-axle bogies: a powered bogie (JBg 3964) and a trailer bogie (JBg 3965). [17] [22] The distance between the pivot pins is 17.2 m. [22]
The vehicle suspension system has two stages of springing. The first stage includes metal-rubber elements, and the second stage consists of pneumatic springs that connect the body to the bogies. [22]
The 214Mx vehicles were produced with 4 different body stylizations. The first 10 units have the original design. From unit number 011 onwards in the 214Ma (SA103) and later in the 214M (SA106), changes were introduced, including a new front design. [17] Another design change occurred with the introduction of the 214Mb (SA135). Vehicles marked by Mińsk Mazowiecki Railway Repair Plant (SA135-004 to 014) have yet another external appearance. The vehicle frames of the 214M family are made of welded steel, with aluminum cladding bonded to the structure. The structural strength complies with the PN-EN 12663 (Category PIII) standard. The vehicles feature plug-sliding doors.
The train is designed to accommodate disabled passengers, featuring approximately 50% low-floor area, a boarding ramp, and a specially adapted closed-system toilet. The floor height is 600 mm above the railhead in the low-floor section and 1,290 mm in the high-floor section. The vehicles have either one or two pairs of double-leaf doors with a clearance of 1,300 mm. [2] [3] Heating is provided by the engine's cooling system, a Webasto Thermo 350 heater, and additional electric blowers installed in the door vestibules. [22] The interior arrangement, seating capacity (typically around 60 seats), monitoring, and air conditioning are tailored to the customer's requirements. The materials used differ between versions branded by Pesa and those by Mińsk Mazowiecki Railway Repair Plant. The vehicles are also equipped with interior monitoring [1] [3] and some have factory-installed Wi-Fi. [24]
The 214Mx vehicles are equipped with standard train protection systems: an active vigilance control device, automatic train braking, Radio-Stop , and fire detection signaling. [3]
At the turn of 2016 and 2017, the Lower Silesian SA106-011 underwent a revision repair, which included repainting and replacing passenger seats. [25]
In early 2018, the SA135-003 was modernized, receiving external reflectors, USB chargers, and new seats during the process. [26]
In 2011, plans were made to modernize the SA106-001 and convert it into a two-section vehicle. A contract was signed between the Kuyavian-Pomeranian Voivodeship and Pesa (selected without a tender), but the agreement was annulled by the National Chamber of Appeal after an appeal by Newag. [27]
In October 2015, the local government signed a contract with Pesa to modernize SA103-005, 007, and 012. The modernization included replacing passenger seats, updating the vehicle monitoring system, overhauling the air conditioning system, replacing luggage racks, installing air dryers, and changing pneumatic connections to threaded connections. [28] [29]
In 2014, SA103-003 and 004 were sent to Pesa for inspections, which included replacing the seats. [30]
On 24 June 2014, the Subcarpathian Voivodeship signed a contract with Pesa for the modernization and revision repair of SA103-001 and 002. The modernization included installing monitoring systems, dynamic passenger information systems, passenger counting systems, and ticket vending machines. The driver’s cab was also modified, and the vehicle was repainted. [31]
On 10 June 2015, the voivodeship announced a tender for the modernization of SA135-010 to 014, which included equipping the vehicles with monitoring systems, dynamic passenger information systems, passenger counting systems, ticket vending machines, and Wi-Fi. All seats were to be replaced, and the vehicles repainted. Pesa won the tender, but the contract was not signed. [32]
In early November 2015, the voivodeship announced a tender to equip SA135-012 to 014 with ticket vending machines. [33]
In October 2017, another tender was announced for the modernization of SA135-010 to 014, with similar scope as in 2015. [34] Pesa submitted the only bid, [35] and a contract was signed with them in March 2018 for the modernization. [36]
At the end of 2011, SA103-008 underwent modernization at Pesa’s facilities. Passenger seats were replaced, and air conditioning, monitoring, and passenger information systems were installed. [37] The vehicle was equipped with GPRS data transmission modules, location and technical condition monitoring systems, including fuel management control. It was also repainted in the new colors of the voivodeship. By the end of 2012, the other two vehicles of this type owned by the West Pomeranian Voivodeship underwent the same modernization. In early 2013, it was decided to equip these railcars with Wi-Fi. Pesa won the tender for this task. [38]
Owner | Operator | Type | Series | Numbers | Years delivered | Quantity | Sources |
---|---|---|---|---|---|---|---|
Lower Silesian Voivodeship | Koleje Dolnośląskie | 214M | SA106 | 011 | 2005 | 10 | [1] |
214Mb | SA135 | 001–009 | 2010–2011 | ||||
Kuyavian-Pomeranian Voivodeship | Arriva RP | 214M | SA106 | 001–002, 004–006, 010, 012–014, 016–019 | 2002–2007 | 13 | [1] |
Lublin Voivodeship | Polregio | 214Ma | SA103 | 005, 007, 012 | 2005–2006 | 3 | [1] |
Masovian Voivodeship | Masovian Railways | 214Mb | SA135 | 015–018, 021–022, 024 | 2010–2015 | 7 | [1] [39] [40] |
Opole Voivodeship | Polregio | 214Ma | SA103 | 003–004, 013 | 2005–2007 | 3 | [1] |
Subcarpathian Voivodeship | Polregio | 214Ma | SA103 | 001–002 | 2004 | 8 | [1] [24] |
214Mb | SA135 | 010–014, 023 | 2010–2016 | ||||
Pomeranian Voivodeship | Polregio | 214Ma | SA103 | 006, 011 | 2005 | 2 | [1] |
Warmian-Masurian Voivodeship | Polregio | 214M | SA106 | 003, 008–009 | 2005–2007 | 3 (5) | [1] |
West Pomeranian Voivodeship | Polregio | 214Ma | SA103 | 008–010 | 2005 | 3 | [1] |
Polregio | 214M | SA106 | 007, 015 | 2021 | 2 | [41] | |
214Mb | SA135 | 019–020 | 2013 | 2 | [1] [42] | ||
Total: | 56 |
The first single-section vehicle of type 214M (series SA106) was delivered in 2005. [43]
On 16 July 2007, the Lower Silesian Marshal’s Office placed another order with Pesa for 3 single-section and 5 two-section diesel vehicles (Pesa 218M). [44] All three single-section vehicles were delivered in the first half of 2008. [19]
On 14 December 2008, all vehicles previously provided to Przewozy Regionalne , including two Kolzam 212M, four Pesa 214M, and six Pesa 218M, were transferred to the newly established Koleje Dolnośląskie. [45]
On 27 May 2010, a contract was awarded to Mińsk Mazowiecki Railway Repair Plant for the delivery of another 6 single-section and 3 two-section vehicles (Pesa 218M). [46] These new vehicles were ordered to replenish the Koleje Dolnośląskie fleet. In mid-November 2010, Mińsk Mazowiecki Railway Repair Plant delivered 3 vehicles of type 214Mb (series SA135). [47]
In January 2015, during the finale of the Great Orchestra of Christmas Charity, the name for SA135-001 was auctioned (won by the company AK Media), [48] [49] and in January 2016 for SA135-002 (auction won by the company Trako ). [50] [51] At the beginning of 2017, the name for SA135-002 was auctioned again, this time won by the fintech company Cinkciarz.pl . [52]
The Kuyavian-Pomeranian Voivodeship has the largest number of Pesa 214M vehicles, all owned by the regional government. Initially operated by Przewozy Regionalne, they have been operated by Arriva since 9 December 2007. [53] On 18 October 2002, a contract was signed for the delivery of eight 214M railcars for the Kuyavian-Pomeranian Voivodeship. [54] One unit was delivered in 2002 and 2003 each, and three units in 2004 and 2005 each. [19]
On 5 December 2008, a contract was signed for the delivery of another 5 vehicles. [55] The delivery of these small and economical vehicles sparked interest from regional authorities in reviving local lines, including from Bydgoszcz to Unisław. [56] High passenger volumes on some lines necessitated double runs or additional carriages. The former option required two vehicles, while the latter complicated maneuvering due to the lack of a cab at the other end of the train. To improve this situation, the regional government ordered trailer cars with a driver’s cab fully compatible with the SA106 – SA123. [57]
In May 2012, Pesa won the tender to modernize two of the oldest vehicles. [58]
On 10 August 2005, two 214Ma vehicles were ceremoniously handed over to the Lublin Voivodeship. [59] The vehicles, designated SA103-005 and -007, were intended for the Lublin–Rzeczyca Ziemiańska–Rozwadów route. [46] This was a new, extended route from Rzeczyca to Rozwadów, made possible by the new Pesa vehicles. [59]
A third vehicle of this type (SA103-012) was produced by Pesa for Lublin in 2006. [60]
On 8 November 2011, a contract was signed for the delivery of two 214Mb railcars for the Masovian Voivodeship. [29] The handover ceremony for both vehicles to Masovian Railways took place on 30 December 2011 in Płock. The new railcars were designated to service the Nasielsk–Sierpc and Kutno–Sierpc routes. [61]
A contract for the delivery of two more vehicles of the same type was signed on 10 July 2012. The new railcars were to be delivered to the customer by November 30 and assigned to the Warsaw–Ostrołęka, Nasielsk–Sierpc, Sierpc–Płock, and Sierpc–Kutno routes. [62] The ceremonial reception of the vehicles took place on 18 December 2012 in Płock. [63]
On 13 June 2014, a contract was signed for the delivery of 2 additional diesel railcars. [64] On 27 November 2014, the carrier received the second of the ordered units. [39]
On 16 June 2015, Masovian Railways ordered another 214Mb, [65] which was delivered on 20 December 2015. [40]
On 6 June 2005, two 214Ma vehicles were handed over to the Opole Voivodeship. [46] The deliveries were completed by 21 June 2005, and on 1 July 2005, both vehicles (SA103 no. 003 and 004) began operations. [66]
In December 2008, the vehicles were directed to service the reactivated Nysa–Brzeg line. [67]
On 23 September 2013, the Opole SA103-003 collided with a truck at a railway crossing in Chrościna in the Nysa County, causing significant damage to the vehicle. [68]
On 6 June 2005, representatives of Pesa handed over two 214Ma vehicles to the authorities of the Subcarpathian Voivodeship. [46] The new diesel railcars, designated SA103-001 and SA103-002, were primarily assigned to service the Jasło–Rzeszów and Zagórz–Jasło routes, [69] but also to replace the Subcarpathian RegioVans (SA109) during their maintenance on the Jarosław–Munina–Horyniec-Zdrój–Hrebenne and Dębica–Tarnobrzeg routes. From 2006, they began to regularly service all 4 routes alternately with the SA109. [70]
On 16 September 2010, in the Subcarpathian Voivodeship Marshal's Office in Rzeszów, representatives of the voivodeship and Mińsk Mazowiecki Railway Repair Plant signed a contract for the delivery of 5 diesel motor railcars. [71] The first two 214Mb Mińsk-1 vehicles were received by the customer on December 30, [72] and on 4 January 2011, they began servicing the Rzeszów–Jarosław–Horyniec-Zdrój and Rzeszów–Jasło–Zagórz routes. The third SA135 was delivered on 2 February 2011, [73] and the fifth in June. [74]
In the summer of 2011, the Subcarpathian SA135, along with the Lublin two-unit SA134, serviced the Rzeszów–Lublin route. [75]
On 8 June 2015, the Subcarpathian Voivodeship ordered another single-unit vehicle. [76] It was delivered with more than a month's delay on 6 January 2016. [24] [77]
On 1 August 2015, the Subcarpathian PR Branch launched a weekend service between Jasło and Komańcza, serviced by one of the SA103 vehicles. The service operated until September 27. [78] [79] [80] On December 13, the weekend service to Komańcza was reinstated in an extended route from Rzeszów to Komańcza. [81]
In February 2017, the Subcarpathian SA135 received permanent approval to operate on the Slovak railway network. [82]
On 7 December 2004, Pesa signed a contract with the Pomeranian Voivodeship for the delivery of two SA103 vehicles and one two-unit SA131. [83] The first of them (SA103-006) was put into operation in August, [83] and the second (SA103-011) on 2 November 2005. [84] The vehicles, operating as a pair, were assigned to service the Gdynia–Kościerzyna route. [84] Initially, they serviced the least crowded routes, replacing two-car sets hauled by SU46 locomotives. [85] Until 1 June 2006, they also serviced some routes on the Lębork–Łeba line. After that, the Pomeranian Przewozy Regionalne branch completely suspended passenger services on this line. [86] The West Pomeranian SA103 serviced the Szczecinek–Słupsk section. [87] A decline in passenger numbers between Kościerzyna and Gdynia resulted in the SA103 beginning to also service more crowded routes in tandem with the SA131 or SA132 from 2007. They also operated individually during off-peak hours. [88] In July 2015, the SA103-011 railcar was sent for tests on the Pomeranian Metropolitan Railway line. [89]
The manufacturer handed over four SA106 vehicles to the Warmian-Masurian Voivodeship in 2005. [46] The SA106-003 had covered 1 million km by 2011. [90] The SA106 vehicles operate on non-electrified or partially electrified local lines in the Olsztyn hub and on the Braniewo–Elbląg route. Due to insufficient capacity on some routes, they operate with a 120A trailer car equipped with its own heating. [91]
On 21 January 2016, the Olsztyn Główny–Szymany Airport service was launched, operated by the SA106 and SA133 vehicles owned by the voivodeship. [92]
In May 2021, the voivodeship sold two vehicles (SA106-007 and 015) to Polregio. [41]
In September 2005, three 214Ma vehicles were handed over to the West Pomeranian Voivodeship in Kołobrzeg (the last of them was handed over on September 25). [46] The vehicles designated as SA103-008, 009, and 010 were assigned to service the Kołobrzeg–Goleniów–Szczecin and Darłowo–Sławno routes, among others. [46] The West Pomeranian SA103 also serviced the inter-voivodeship Szczecinek–Słupsk section. [87]
On 1 July 2013, a contract was signed with Przewozy Regionalne for the leasing of 2 diesel railcars. The vehicles were purchased to service the Koluszki–Opoczno route, previously serviced by SN81 -006, which was designated for scrapping after an accident on 2 September 2013. [42]
The first vehicle (SA135-019) was delivered to the PR Łódź base in Idzikowice on December 5, and on December 11, it was presented at the Łódź Kaliska railway station, and on December 12, it began operations on the Koluszki–Opoczno route. The second vehicle (SA135-020) was delivered on December 23 and began operations on January 3. [42]
On summer Sundays in 2015 and on September 13 during the presidential harvest festival, one of the vehicles serviced the Łódź–Spała route. [93] [94]
In May 2021, the carrier purchased SA106-007 and 015 from the Warmian-Masurian Voivodeship, [41] which shortly thereafter were sent to the Podlachia branch to service routes from Białystok to Waliły, Suwałki, Czeremcha, and Hajnówka. [95]
Koleje Dolnośląskie is a regional rail operator in the Lower Silesian Voivodeship of Poland.
Newag 220M/221M is a series of diesel multiple units, they are two and three-section passenger trains which have been manufactured since 2010. They are designed for suburban and long-distance passenger transit. They are low-floor, open-coach units produced by Newag in Nowy Sącz in Poland. Altogether 9 units have been produced which are operated by Przewozy Regionalne and Silesian Railways.
Pesa Acatus is a standard-gauge electric multiple unit produced in a single copy at the Pesa plant in Bydgoszcz in 2006, specifically for the Marshal's Office of the Łódź Voivodeship. During test runs, it was a four-car unit, and it is nowadays operated in a three-car configuration.
Pafawag 101N was a two-car, low-floor electric multiple unit (EPU) tram produced by Pafawag in Wrocław from 1968 to 1972. A total of 40 101Ns were built for the Warsaw Commuter Railway.
Pesa Bydgostia is a four-car standard-gauge electric multiple unit of Polish production, manufactured by Pesa Bydgoszcz upon order from Przewozy Regionalne, with a total of 14 units produced. In December 2008, they were transferred to PKP Intercity. The train set is a developmental version of the Pesa Acatus train.
Pesa 401M is a control car used as a trailer for Pesa 214M railbuses of the SA106 series. This wagon was built by Pesa for the Marshal's Office of the Kuyavian–Pomeranian Voivodeship, with a total of 5 units produced.
Pesa Mazovia is a standard-gauge, four-car electric multiple unit produced in 2004 by Pesa from Bydgoszcz in a single unit for the Warsaw Commuter Railway. It is the first vehicle of this kind built by the manufacturer.
Newag 19WE is a standard-gauge, four-car electric multiple unit (EMU) produced between 2008 and 2010 at the Newag plant in Nowy Sącz. A total of 4 units were built, which are operated by Szybka Kolej Miejska in Warsaw.
Pesa Acatus II is a four-car, partially low-floor, standard-gauge electric multiple unit of Polish production, manufactured by Pesa at the turn of 2010 and 2011. Five units were purchased by the local government of the Lesser Poland Voivodeship. Initially, the vehicles were operated by Przewozy Regionalne, and later by Koleje Małopolskie, which have additionally owned the vehicles since 2018.
Pesa 218M is a family of two-car standard-gauge diesel multiple units (DMUs) produced by Pesa between 2005 and 2015. Only one single-engine unit of the original 218M model was built, while the remaining dual-engine units were designated as subtypes 218Ma-218Md. A total of 76 units were produced, which are operated by Arriva, Koleje Dolnośląskie, Koleje Wielkopolskie, Polregio, and Szybka Kolej Miejska in Tricity.
Pesa 611M is a broad-gauge diesel railcar manufactured by Pesa in Bydgoszcz. Two units were produced for Russian Railways and delivered in 2013.
Pesa 620M is a broad-gauge diesel railcar produced since 2004 by Pesa for the Lithuanian Railways and Ukrainian Railways, and since 2011, in cooperation with Belkommunmash, also for the Belarusian Railway. A total of 29 units were produced.
Solaris Tramino is a family of trams initially produced by Solaris Bus & Coach from Bolechowo near Poznań, and later by Stadler Polska after it acquired Solaris Tram. The prototype was unveiled in July 2009, and the delivery of series trams took place between 2011 and 2022. A total of 152 trams were produced and put into service in Germany and Poland.
Pesa 33WE is a standard-gauge, low-platform electric multiple unit produced by Pesa in Bydgoszcz in a quantity of 14 units for the Warsaw Commuter Railway. They replaced the EN94 series trains.
Moderus Beta are trams resulting from the modernization of German Stadtbahnwagen M/N cars, produced by the company Modertrans Poznań. Between 2009 and 2015, a total of 65 of these trams were modernized, and they operate in Gdańsk and Elbląg.
Newag 222M is a two-car diesel multiple unit produced by the Newag company from Nowy Sącz. Two units were manufactured for Masovian Railways, and four more for the Subcarpathian Voivodeship.
Pesa Tramicus is a uni-directional low-floor tram produced by Pesa in Bydgoszcz. The tram is available in three versions: a three-section (121N) or five-section configuration, with sections connected by accordion-type pivot joints. Between 2005 and 2008, a total of 33 Tramicus trams were produced, and they were delivered to Warsaw, Łódź, Elbląg, and Bydgoszcz. The experience gained from designing and operating the Tramicus family led to the development of the Swing vehicles.
EN81 is an electric motor coach produced by the Pesa plant in Bydgoszcz in 2005 and 2007. A total of 8 units were built, currently operated by Polregio in the Świętokrzyskie Voivodeship, and previously also in the Lesser Poland Voivodeship. The EN81 is intended for use on electrified regional routes to service routes with a small number of passengers, where operating multi-car electric multiple units would be uneconomical.
Pesa 630M is a two-car, broad-gauge diesel multiple unit produced by Pesa. Six units are currently in service, operated by Ukrainian Railways, Kazakhstan Temir Joly, and Lithuanian Railways.
Pesa 610M is a broad-gauge diesel inspection railcar produced by Pesa for Ukrainian Railways. It is a developmental version of the single-unit diesel rail vehicle Partner. Only one unit was built, delivered in 2004.