Princess lace

Last updated
Princess lace, made with machine tape Princess lace.jpg
Princess lace, made with machine tape

Princess lace is a tape lace. It is made of straight machine-made lace tapes also called princess lace. [1] The lacemaker bends and folds these into the shape of flowers and leaves, and sews them into position.

History

Princess lace was introduced at the end of the 19th century in Belgium. The most famous cities for princess lace were Aalst, Ninove, Geraardsbergen, Dendermonde and Liedekerke. It is reputed to be called Princess lace because the Belgium Royal Family used it.

Princess lace was mostly a home industry. In 1993, there were still 15 lace merchants who asked lacemakers to make princess lace. [2]

Related Research Articles

<span class="mw-page-title-main">Lace</span> Openwork fabric, patterned with open holes in the work, made by machine or by hand

Lace is a delicate fabric made of yarn or thread in an open weblike pattern, made by machine or by hand. Generally, lace is divided into two main categories, needlelace and bobbin lace, although there are other types of lace, such as knitted or crocheted lace. Other laces such as these are considered as a category of their specific craft. Knitted lace, therefore, is an example of knitting. This article considers both needle lace and bobbin lace.

<span class="mw-page-title-main">Bobbin lace</span> Handmade lace

Bobbin lace is a lace textile made by braiding and twisting lengths of thread, which are wound on bobbins to manage them. As the work progresses, the weaving is held in place with pins set in a lace pillow, the placement of the pins usually determined by a pattern or pricking pinned on the pillow.

<span class="mw-page-title-main">Bobbin</span> Spool or cylinder around which thread, line or wire is coiled.

A bobbin or spool is a spindle or cylinder, with or without flanges, on which yarn, thread, wire, tape or film is wound. Bobbins are typically found in industrial textile machinery, as well as in sewing machines, fishing reels, tape measures, film rolls, cassette tapes, within electronic and electrical equipment, and for various other applications.

Filet lace is the general word used for all the different techniques of embroidery on knotted net. It is a hand made needlework created by weaving or embroidery using a long blunt needle and a thread on a ground of knotted net lace or filet work made of square or diagonal meshes of the same sizes or of different sizes. Lacis uses the same technique but is made on a ground of leno or small canvas.

<span class="mw-page-title-main">Guipure</span> Type of bobbin lace in which motifs are connected by bars or plaits

Guipure lace is a type of bobbin lace. It connects the motifs with bars or plaits rather than net or mesh.

<span class="mw-page-title-main">Tønder lace</span> Type of bobbin lace from Denmark

Tønder lace is a point-ground type of handmade bobbin lace identified with the Tønder region of Denmark since about 1850, although lace of many types has been made there since as early as 1650. The term is also used more broadly, to refer to any bobbin lace made in Denmark.

<span class="mw-page-title-main">Limerick lace</span>

Limerick lace is a specific class of lace originating in Limerick, Ireland, which was later produced throughout the country. It evolved from the invention of a machine which made net in 1808. Until John Heathcoat invented a net-making machine in Devon in 1815, handmade net was a very expensive fabric. This meant cheap net became available to Irish lacemakers, particularly after 1823 when Heathcoat's patent expired.

<span class="mw-page-title-main">Ñandutí</span>

Ñandutí is a traditional Paraguayan lace. The name means "spider web" in Guaraní, the official, indigenous language of Paraguay.

<span class="mw-page-title-main">Brussels lace</span> Type of bobbin lace from Brussels

Brussels lace is a type of pillow lace that originated in and around Brussels. The term "Brussels lace" has been broadly used for any lace from Brussels; however, strictly interpreted, the term refers to bobbin lace, in which the pattern is made first, and the ground, or réseau added, also using bobbin lace. Brussels lace is not to be confused with Brussels point, which is a type of needle lace, though sometimes also called "Brussels lace".

<span class="mw-page-title-main">Blonde lace</span> Silken bobbin lace from france

Blonde lace is a continuous bobbin lace from France that is made of silk. The term blonde refers to the natural color of the silk thread. Originally this lace was made with the natural-colored silk, and later in black. Most blonde lace was also made in black. It was made in the 18th and 19th centuries. The pattern, which is generally of flowers, is made with a soft silk thread, thicker than the thread used for the ground. This causes a big contrast between the flowers and the ground. It uses the same stitches as Chantilly lace and Lille lace, and is similarly made in strips 5 inches wide and invisibly joined. Blonde lace is not as good as Chantilly lace though, as the ground isn't as firm, nor is the pattern as regular.

<span class="mw-page-title-main">Torchon lace</span> A continuous, geometric bobbin lace

Torchon lace is a bobbin lace that was made all over Europe. It is continuous, with the pattern made at the same time as the ground. Torchon lace is notable for being coarse and strong, as well as its simple geometric patterns and straight lines. It does not use representational designs. Torchon lace was used by the middle classes for edging or insertion, and also to trim cotton and linen underwear, where it was ideal because of its strength and because it was inexpensive. Torchon lace was originally made from flax, but cotton is used as well, and has been for a long time. It is made in strips 1 to 2 inches wide. Torchon lace generally has a gimp outlining the pattern. The gimp was first used in Sweden, but now is used generally. Colored threads are occasionally used, but in general Torchon lace is white.

<span class="mw-page-title-main">Binche lace</span> Type of bobbin lace from Binche, Belgium

Binche lace is a type of bobbin lace that originated in the town of Binche, Belgium. It is continuous, meaning it is made all at once, in one piece. It is generally made in strips 2 inches (5 cm) wide. Though typically it has no cordonnet outlining the design against the ground, occasional pieces are made with a very fine one, about the same thickness as the thread used in the pattern. The pattern in Binche lace is very detailed, with animal scenes and figures.

<i>The Lacemaker</i> (Vermeer) 1669–1670 painting by Johannes Vermeer

The Lacemaker is a painting by the Dutch artist Johannes Vermeer (1632–1675), completed around 1669–1670 and held in the Louvre, Paris. The work shows a young woman wearing a yellow bodice, holding up a pair of bobbins in her left hand as she carefully places a pin in the pillow on which she is making her bobbin lace. At 24.5 cm x 21 cm, the work is the smallest of Vermeer's paintings, but in many ways one of his most abstract and unusual. The canvas used was cut from the same bolt as that used for A Young Woman Seated at the Virginals, and both paintings seem to have had identical dimensions originally.

<span class="mw-page-title-main">Battenberg lace</span> Type of American tape lace

Battenberg lace is a type of tape lace. It is of American origin, designed and first made by Sara Hadley of New York. This American lace was named either in honor of the wedding of Princess Beatrice, Queen Victoria's youngest daughter, to Prince Henry of Battenberg, or from the widowed Princess Beatrice. It is made using bobbins and needles, or just needles alone.The original Battenberg lace used just one stitich: buttonhole picot. Other stitches that were later used include flat wheel and rings or "buttons).

<span class="mw-page-title-main">Bedfordshire lace</span> Type of bobbin lace made in the English Midlands

Bedfordshire lace is a style of bobbin lace originating from Bedfordshire in the 19th century, and made in the English Midlands lacemaking area. It was worked as a continuous width on a bolster pillow. It is a guipure style of lace.

<span class="mw-page-title-main">Lace machine</span> Powered equipment for producing imitations of hand-made lace

Lace machines took over the commercial manufacture of lace during the nineteenth century.

<span class="mw-page-title-main">Maltese lace</span> Type of guipure bobbin lace from Malta

Maltese lace is a style of bobbin lace made in Malta. It is a guipure style of lace. It is worked as a continuous width on a tall, thin, upright lace pillow. Bigger pieces are made of two or more parts sewn together.

<span class="mw-page-title-main">Tape lace</span> Lace made from pre-made lace tapes

Tape lace is made with a straight tape which is bent into the shape required and sewn into position. Various needle lace fillings may be used to fill the gaps. The tape is usually machine made. This type of lace is also known as mixed tape lace, or mixed lace, as it uses more than one technique: one in making the tape, and a different technique for the fillings and joins.

<span class="mw-page-title-main">Renaissance lace</span> Type of tape lace using machine-made tapes

Renaissance lace is a type of tape lace. The name refers to the rebirth of antique Italian forms to create the patterns of this 19th century lace.

<span class="mw-page-title-main">Part lace</span> Lace formed from knotted bobbin motifs

Part lace or sectional lace is a way of making bobbin lace. It characterises various styles, such as Honiton lace or Brussels lace.

References

  1. Lacemaking Circle. "Lace tapes and braids" . Retrieved 24 November 2014.
  2. Claeys Antique. "Princess tape history" . Retrieved 24 November 2014.