Side reins

Last updated
Side reins used on an equestrian vaulting horse. BasicVault46664868.jpg
Side reins used on an equestrian vaulting horse.
Animation of side reins in use Plikenfff.gif
Animation of side reins in use

Side reins are equipment used when longeing a horse, running from the bit of the bridle to the saddle or surcingle. As a horse training tool, they encourage flexion and softness in the horse's mouth. For longe line work with a rider up who does not carry ordinary riding reins, they help calm and settle the animal. However, they are a tool best used by experienced handlers; used improperly they may unduly restrict the horse's movement or cause an accident.

Contents

The side rein

A set of side reins with elastic, buckle adjustment SideReins.jpg
A set of side reins with elastic, buckle adjustment

Side reins are made of leather or webbing, sometimes with added elastic, and have several rings or holes for buckles along their length. They are easily adjusted. Some designs have adjustable buckles and attach to the bit with a snap, other designs run through the bit ring, then fold back on themselves and snap to their own rings.

Side reins may be completely of solid material, or they may have an elastic or rubber ring insert. Each design has its advantages and disadvantages. Designs with elastic have more "give" to them, which is useful for sensitive horses or horses that throw their heads. Elastic inserts must be used with caution, however, as some horses learn to lean on them. Solid side reins are the older, classical design, give the horse a more solid contact to work into and discourage leaning, but must be adjusted with greater care because their lack of give may upset a sensitive horse and, particularly if too tight, may provoke rearing, headshaking and even panic in some animals. Side reins with a rubber donut provide some give, although not as much as elastic and so discourage leaning. However, they are heavier and are prone to bounce when the horse trots or canters, which does not provide as steady a contact as the solid or elastic-insert side reins.

Uses of the side rein

Elasticized side reins are often used with training young horses prior to being ridden. They help accustom a horse to the feel of pressure on the bit, and reward the horse when it gives or flexes to bit pressure. Solid side reins are usually used for more advanced horses. They give the horse something to take contact with, encourage balance and correct head carriage, help a horse develop self-carriage, and help stop a horse from over-bending in the neck.

Adjustment of the side rein

Side reins may be attached from the bit rings to the surcingle rings, or from the bit to the buckles of the girth of an English saddle or cinch rings of a western saddle.

Side reins are adjusted longer for less-experienced horses, and gradually shortened and raised higher (from point of shoulder up to the point of hip) as a horse becomes better trained. Side reins should never be so short that the horse's head is pulled behind the vertical. For green horses, the side reins should be adjusted so that the horse's head is approximately 4 inches in front of the vertical and the side reins are attached at a point level with the point of the shoulder.

As the horse becomes more advanced and more physically developed, the side reins may be shortened so the head is nearly vertical to the ground. Side reins should not pull the horse in—they do not create collection. Rather, a properly longed horse will collect himself, and the shorter side reins will be the correct length for him to keep a contact with the bit. Short side reins should not be used for long periods of time.

Side reins should usually be adjusted so they are the same length on each side, though in some cases, the inside rein may be slightly shorter, particularly with a horse that has previously been allowed to develop the habit of arcing its body away from the circle. It is considered correct to fasten the outside rein before the inside rein, similarly to the idea that a rider would take up outside contact before inside rein contact. It is best to make sure that both side reins are adjusted before attaching them to the bit, as it can be irritating to the horse to stand with one side rein attached while the handler is adjusting the other.

Improper adjustment of side reins can cause a horse to go behind the bit, spoil the horse's training, and even cause the horse to feel trapped, leading to rearing and the possibility that the horse will flip over.

When to attach side reins

A horse should always be warmed up and cooled down without the side reins, allowed to stretch long and low. When the side reins are first applied during a workout, they should be adjusted long and gradually shortened as the horse warms up into them. Side reins are only for work in the trot and canter. Working a horse in side reins at the walk, other than in brief transitions can spoil the gait by inhibiting forward motion.

Side reins should not be used for jumping, as they restrict the use of the neck too much, and may even cause the horse to fall.

The sliding side rein/lauffer rein

The sliding side rein. These are adjusted with the side reins attaching between the legs. Wakira3.jpg
The sliding side rein. These are adjusted with the side reins attaching between the legs.

The sliding side rein gives a bit more freedom to the horse than the standard side rein. It attaches from a lower ring on the surcingle, through the bit ring, and back up to an upper ring on the surcingle. This allows the horse to stretch down and lower his head while still maintaining contact with the bit, and are therefore useful on horses that are tight in the back, carry their head too high, or are learning to stretch forward and down for the bit contact.

Like the side rein, the lauffer rein is adjusted so that the horse has contact with it when his head is at or just in front of the vertical. Green horses should have the lauffer rein attached to a lower and middle surcingle rein, while more advanced horses can have the reins raised to a middle and high ring on the surcingle.

The sliding side rein was designed to be attached to the outside rings of the surcingle, not between the legs. Running the reins between the legs can encourage a horse to get behind the bit and overflex.

Related Research Articles

Tack is equipment or accessories equipped on horses and other equines in the course of their use as domesticated animals. This equipment includes such items as saddles, stirrups, bridles, halters, reins, bits, and harnesses. Equipping a horse is often referred to as tacking up, and involves putting the tack equipment on the horse. A room to store such equipment, usually near or in a stable, is a tack room.

<span class="mw-page-title-main">Equitation</span> Art or practice of horse riding or horsemanship

Equitation is the art or practice of horse riding or horsemanship.

<span class="mw-page-title-main">Bridle</span> Piece of equipment used to direct a horse

A bridle is a piece of equipment used to direct a horse. As defined in the Oxford English Dictionary, the "bridle" includes both the headstall that holds a bit that goes in the mouth of a horse, and the reins that are attached to the bit.

<span class="mw-page-title-main">Canter and gallop</span> Equine gait

The canter and gallop are variations on the fastest gait that can be performed by a horse or other equine. The canter is a controlled three-beat gait, while the gallop is a faster, four-beat variation of the same gait. It is a natural gait possessed by all horses, faster than most horses' trot, or ambling gaits. The gallop is the fastest gait of the horse, averaging about 40 to 48 kilometres per hour. The speed of the canter varies between 16 to 27 kilometres per hour depending on the length of the horse's stride. A variation of the canter, seen in western riding, is called a lope, and is generally quite slow, no more than 13–19 kilometres per hour (8–12 mph).

<span class="mw-page-title-main">Longeing</span> Method of training and exercising horses

Longeing or lungeing is a technique for training and exercising horses. It is also a critical component of the sport of equestrian vaulting.

<span class="mw-page-title-main">Surcingle</span>

A surcingle is a strap made of leather or leather-like synthetic materials such as nylon or neoprene, sometimes with elastic, that fastens around the horse's girth.

<span class="mw-page-title-main">Curb chain</span> Piece of horse tack used with a curb bit

A curb chain, or curb strap, is a piece of horse tack required for proper use on any type of curb bit. It is a flat linked chain or flat strap that runs under the chin groove of the horse, between the bit shank's purchase arms. It has a buckle or hook attachment and English designs have a "fly link" in the middle to hold a lip strap. On English bridles the horse is bridled with the curb chain undone on one side, then connected once on the horse. On western bridles, the curb chain is kept buckled to both sides of the bit.

<span class="mw-page-title-main">Curb bit</span> Horse tack

A curb bit is a type of bit used for riding horses that uses lever action. It includes the pelham bit and the Weymouth curb along with the traditional "curb bit" used mainly by Western riders.

<span class="mw-page-title-main">Double bridle</span>

A double bridle, also called a full bridle or Weymouth bridle, is a bridle that has two bits and four reins. One bit is the bradoon, is a modified snaffle bit that is smaller in diameter and has smaller bit rings than a traditional snaffle, and it is adjusted so that it sits above and behind the other bit, a curb bit. Another term for this combination of curb and snaffle bit is a "bit and bradoon", where the word "bit" in this particular context refers to the curb.

<span class="mw-page-title-main">Gag bit</span>

The gag bit is a type of bit for a horse. Because the cheek piece and reins attach to different rings there is leverage action. Severity of leverage action depends on where the reins attach. For example, in a Dutch Gag, the further the rein attachment from the mouthpiece the greater the leverage. The gag bit is related to a Pelham bit and a double bridle but the gag bit has no curb strap.

A martingale is any of several designs of tack that are used on horses to control head carriage. Martingales may be seen in a wide variety of equestrian disciplines, both riding and driving. Rules for their use vary widely; in some disciplines they are never used, others allow them for schooling but not in judged performance, and some organizations allow certain designs in competition.

<span class="mw-page-title-main">Chambon</span>

A chambon is a piece of horse tack. It is a strap that runs forward from the bottom of the girth or surcingle, and forks. The forks continue to a ring on either side of the bridle or halter, at the base of the crownpiece. Running through those rings, the forks follow the cheekpieces to the bit. They may attach to the bit or pass through the bit rings and attach to themselves below the horse's neck.

<span class="mw-page-title-main">Rein</span> Riding tack item used to direct animal

Reins are items of horse tack, used to direct a horse or other animal used for riding. They are long straps that can be made of leather, nylon, metal, or other materials, and attach to a bridle via either its bit or its noseband.

<span class="mw-page-title-main">Girth (tack)</span> Strap used to keep the saddle in place on a horse

A girth, sometimes called a cinch, is a piece of equipment used to keep the saddle in place on a horse or other animal. It passes under the barrel of the equine, usually attached to the saddle on both sides by two or three leather straps called billets. Girths are used on Australian and English saddles, while western saddles and many pack saddles have a cinch, which is fastened to the saddle by a single wide leather strap on each side, called a latigo.

<span class="mw-page-title-main">Overcheck</span>

A bearing rein, known today as an overcheck or a checkrein, is a piece of horse tack that runs from a point on the horse's back, over the head, to a bit. It is used to prevent the horse from lowering its head beyond a fixed point. A variation called a side check passes beside the ears through loops at the top of the bridle cheekpieces.

<span class="mw-page-title-main">Draw reins and running reins</span> Pieces of horse riding equipment

Draw reins and running reins are pieces of riding equipment used for training that use the mechanical advantage of a 'single movable pulley' to cause the horse to bring its head down and inward. While a regular rein is the strap that attaches to the bit and is held by the rider, these types of reins slide through the bit ring, adding leverage to the rider's hands and arms, allowing the rider to force the horse's head into a desired position.

<span class="mw-page-title-main">Gogue</span>

The Gogue is a piece of horse tack used for training purposes, and is very popular in Europe, with a similar place in training regimes as side reins. Its purpose is to encourage the horse to raise the neck, free the shoulders and engage the hocks, so that he may develop the correct muscles for a rounded topline.

<span class="mw-page-title-main">Breastplate (tack)</span>

A breastplate is a piece of riding equipment used on horses. Its purpose is to keep the saddle or harness from sliding back.

<span class="mw-page-title-main">Western riding</span> Style of horseback riding which evolved from the ranching and warfare traditions

Western riding is considered a style of horse riding which has evolved from the ranching and welfare traditions which were brought to the Americas by the Spanish Conquistadors, as well as both equipment and riding style which evolved to meet the working needs of the cowboy in the American West. At the time, American cowboys had to work long hours in the saddle and often over rough terrain, sometimes having to rope a cattle using a lariat, also known as a lasso. Because of the necessity to control the horse with one hand and use a lariat with the other, western horses were trained to neck rein, that is, to change direction with light pressure of a rein against the horse's neck. Horses were also trained to exercise a certain degree of independence in using their natural instincts to follow the movements of a cow, thus a riding style developed that emphasized a deep, secure seat, and training methods encouraged a horse to be responsive on very light rein contact.

A bitting rig or bitting harness is a training tool for horses that can teach a horse to accept a bridle and bit, and later assist a horse in developing the necessary musculature for a given equestrianism discipline. Generally used in conjunction with training on a longe line, it is most often seen in the training of Saddle seat horses, but also is used by some dressage trainers and as a tool to start horses in driving.

References