Space Shuttle Pathfinder

Last updated

Pathfinder
Space Shuttle Orbiter model Pathfinder.jpg
Pathfinder on the mate-demate device at the Shuttle Landing Facility
Type Space Shuttle test simulator
Construction numberOV-098
CountryUnited States
StatusRetired; on display at the U.S. Space & Rocket Center, Huntsville, Alabama
No. of missions6 tests

The Space Shuttle Pathfinder (unofficial Orbiter Vehicle Designation: OV-098) is a Space Shuttle test simulator made of steel and wood. Constructed by NASA in 1977 as an unnamed facilities test article, it was purchased in the early 1980s by the America-Japan Society, Inc. which had it refurbished, named it, and placed it on display in the Great Space Shuttle Exhibition in Tokyo. [1] The mockup was later returned to the United States and placed on permanent display at the U.S. Space & Rocket Center in Huntsville, Alabama, in May 1988.

Contents

Activities

Originally unnamed, the simulator was built at the Marshall Space Flight Center in 1977 for use in activities such as checking roadway clearances, crane capabilities and fits within structures. [2] It was later shipped by barge to the Kennedy Space Center and was used for ground crew testing in the Vehicle Assembly Building, Orbiter Processing Facility, and Shuttle Landing Facility. Pathfinder is approximately the same size, shape and weight of an actual orbiter. Using Pathfinder allowed for facilities testing without requiring use of the more delicate and expensive Enterprise. [2]

Refurbishment

The Space Shuttle Orbiter simulator is hoisted into the Saturn V Dynamic Test Stand at NASA's Marshall Space Flight Center. Space Shuttle Pathfinder OV-098 original configuration.jpg
The Space Shuttle Orbiter simulator is hoisted into the Saturn V Dynamic Test Stand at NASA's Marshall Space Flight Center.

After sitting in storage for many years, the America-Japan Society, Inc. obtained the wood and steel mockup at a cost of US$1 million and hired Teledyne Brown Engineering to refurbish it to more closely resemble an actual Space Shuttle. [3] It was named Pathfinder and displayed at the Great Space Shuttle Exposition in Tokyo from June 1983 to August 1984. [1]

U.S. Space & Rocket Center

Pathfinder at the U.S. Space & Rocket Center in Alabama sits atop MPTA-ET. The SRB forward assemblies have changed over the years. Space Shuttle Pathfinder Highsmith.jpg
Pathfinder at the U.S. Space & Rocket Center in Alabama sits atop MPTA-ET. The SRB forward assemblies have changed over the years.

After the exhibit, Pathfinder returned to the United States. The U.S. Space & Rocket Center in Huntsville, Alabama designed the display and built a stand. NASA provided MPTA-ET and two filament-wound Solid Rocket Booster casings, which had been designed for polar-orbit launches from Vandenberg Air Force Base. [4] [5]

On February 16, 1988, NASA shipped MPTA-ET, an external tank which had been used for propulsion tests with MPTA-098, on an open barge from Stennis Space Center in Mississippi up the river to Michoud, where it was transferred to the Orion barge to sail up the river to Marshall Space Flight Center. The tank, not having been designed to hold the weight of an orbiter at an angle, required reinforcements. NASA installed I-beam spokes in the tank at Marshall, in building 4705. Pathfinder's weight is concentrated in the tail, though, and the tank required further reinforcements. The tank was then transported over land to the display at the museum. [5]

In May 1988, the 89-ton Pathfinder was installed atop the display at the Space & Rocket Center. [6]

In 1999, NASA removed the forward assemblies from each SRB attached to the Pathfinder stack. Although the SRBs are recovered and reused after each flight, several of the forward assemblies had been damaged or lost over the history of the Space Shuttle program necessitating requisition of those attached to the Pathfinder stack as spares. [4] [7]

In 2008, repairs were made to the forward part of the mockup after decades of exposure to the weather had corroded the floor section near the vehicle's nose. This corrosion caused the "belly pan" to drop from a mounting bracket onto the external tank. The damaged area was part of the fiberglass and plywood added to the mockup before its exhibition in Japan. [2]

The Space Shuttle Pathfinder frame awaits restoration beside its home for the preceding 30 years. Pathfinder Frame Starboard Forward.jpg
The Space Shuttle Pathfinder frame awaits restoration beside its home for the preceding 30 years.

In 2020 the Center received a "Save America's Treasures" grant for $500,000 from the National Park Service. [8] The project began with the wings and tail section temporarily removed between January and February 2021. On February 8, the Pathfinder was lowered from its mounting points atop the fuel tank for the first time since May 5, 1988. The restoration project is proceeding alongside cooperation with the Marshall Space Flight Center, who will assist in assessing the structural integrity of the test shuttle. [9]

On Aug. 28, 2024, two cranes lifted the body of Pathfinder back into position on the shuttle stack in the first phase of a multi-day reassembly process. The reattachment of the wings and engine bells were scheduled to follow, completing the restoration of the display. [10]

See also

Related Research Articles

<span class="mw-page-title-main">Space Shuttle</span> Partially reusable launch system and space plane

The Space Shuttle is a retired, partially reusable low Earth orbital spacecraft system operated from 1981 to 2011 by the U.S. National Aeronautics and Space Administration (NASA) as part of the Space Shuttle program. Its official program name was Space Transportation System (STS), taken from the 1969 plan led by U.S. Vice President Spiro Agnew for a system of reusable spacecraft where it was the only item funded for development.

Space Shuttle <i>Enterprise</i> Space Shuttle test vehicle, used for glide tests

Space Shuttle Enterprise was the first orbiter of the Space Shuttle system. Rolled out on September 17, 1976, it was built for NASA as part of the Space Shuttle program to perform atmospheric test flights after being launched from a modified Boeing 747. It was constructed without engines or a functional heat shield. As a result, it was not capable of spaceflight.

Space Shuttle <i>Endeavour</i> Retired Space Shuttle orbiter (1992–2011)

Space Shuttle Endeavour is a retired orbiter from NASA's Space Shuttle program and the fifth and final operational Shuttle built. It embarked on its first mission, STS-49, in May 1992 and its 25th and final mission, STS-134, in May 2011. STS-134 was expected to be the final mission of the Space Shuttle program, but with the authorization of STS-135 by the United States Congress, Atlantis became the last shuttle to fly.

<span class="mw-page-title-main">Marshall Space Flight Center</span> Rocketry and spacecraft propulsion research center

Marshall Space Flight Center, located in Redstone Arsenal, Alabama, is the U.S. government's civilian rocketry and spacecraft propulsion research center. As the largest NASA center, MSFC's first mission was developing the Saturn launch vehicles for the Apollo program. Marshall has been the lead center for the Space Shuttle main propulsion and external tank; payloads and related crew training; International Space Station (ISS) design and assembly; computers, networks, and information management; and the Space Launch System. Located on the Redstone Arsenal near Huntsville, MSFC is named in honor of General of the Army George C. Marshall.

<span class="mw-page-title-main">Space Shuttle Solid Rocket Booster</span> Solid propellant rocket used to launch the Space Shuttle orbiter

The Space Shuttle Solid Rocket Booster (SRB) was the first solid-propellant rocket to be used for primary propulsion on a vehicle used for human spaceflight. A pair of these provided 85% of the Space Shuttle's thrust at liftoff and for the first two minutes of ascent. After burnout, they were jettisoned and parachuted into the Atlantic Ocean where they were recovered, examined, refurbished, and reused.

<span class="mw-page-title-main">Saturn IB</span> American rocket used in the Apollo program during the 1960s and 70s

The Saturn IB(also known as the uprated Saturn I) was an American launch vehicle commissioned by the National Aeronautics and Space Administration (NASA) for the Apollo program. It uprated the Saturn I by replacing the S-IV second stage, with the S-IVB. The S-IB first stage also increased the S-I baseline's thrust from 1,500,000 pounds-force (6,700,000 N) to 1,600,000 pounds-force (7,100,000 N) and propellant load by 3.1%. This increased the Saturn I's low Earth orbit payload capability from 20,000 pounds (9,100 kg) to 46,000 pounds (21,000 kg), enough for early flight tests of a half-fueled Apollo command and service module (CSM) or a fully fueled Apollo Lunar Module (LM), before the larger Saturn V needed for lunar flight was ready.

<span class="mw-page-title-main">Space Shuttle external tank</span> Component of the Space Shuttle launch vehicle

The Space Shuttle external tank (ET) was the component of the Space Shuttle launch vehicle that contained the liquid hydrogen fuel and liquid oxygen oxidizer. During lift-off and ascent it supplied the fuel and oxidizer under pressure to the three RS-25 main engines in the orbiter. The ET was jettisoned just over 10 seconds after main engine cut-off (MECO) and it re-entered the Earth's atmosphere. Unlike the Solid Rocket Boosters, external tanks were not re-used. They broke up before impact in the Indian Ocean, away from shipping lanes and were not recovered.

<span class="mw-page-title-main">U.S. Space & Rocket Center</span> Science museum in Huntsville, Alabama

The U.S. Space & Rocket Center in Huntsville, Alabama is a museum operated by the government of Alabama, showcasing rockets, achievements, and artifacts of the U.S. space program. Sometimes billed as "Earth's largest space museum", astronaut Owen Garriott described the place as, "a great way to learn about space in a town that has embraced the space program from the very beginning."

<span class="mw-page-title-main">Shuttle-derived vehicle</span> Launch vehicle built from Space Shuttle components

Shuttle-derived vehicles (SDV) are space launch vehicles and spacecraft that use components, technology, and infrastructure originally developed for the Space Shuttle program.

<span class="mw-page-title-main">Space Shuttle Main Propulsion Test Article</span> Space Shuttle orbiter test model

The Main Propulsion Test Article (MPTA-098) was built by Rockwell International as a testbed for the definitive propulsion and fuel delivery systems for the U.S. Space Shuttle Program.

<span class="mw-page-title-main">Ares V</span> Canceled NASA rocket key to Project Constellation

The Ares V was the planned cargo launch component of the cancelled NASA Constellation program, which was to have replaced the Space Shuttle after its retirement in 2011. Ares V was also planned to carry supplies for a human presence on Mars. Ares V and the smaller Ares I were named after Ares, the Greek god of war.

<span class="mw-page-title-main">Ares I</span> Canceled NASA rocket key to the Constellation program

Ares I was the crew launch vehicle that was being developed by NASA as part of the Constellation program. The name "Ares" refers to the Greek deity Ares, who is identified with the Roman god Mars. Ares I was originally known as the "Crew Launch Vehicle" (CLV).

<span class="mw-page-title-main">Boilerplate (spaceflight)</span> Nonfunctional spacecraft or payload

A boilerplate spacecraft, also known as a mass simulator, is a nonfunctional craft or payload that is used to test various configurations and basic size, load, and handling characteristics of rocket launch vehicles. It is far less expensive to build multiple, full-scale, non-functional boilerplate spacecraft than it is to develop the full system. In this way, boilerplate spacecraft allow components and aspects of cutting-edge aerospace projects to be tested while detailed contracts for the final project are being negotiated. These tests may be used to develop procedures for mating a spacecraft to its launch vehicle, emergency access and egress, maintenance support activities, and various transportation processes.

<span class="mw-page-title-main">Space Shuttle orbiter</span> Spaceplane component of the Space Shuttle

The Space Shuttle orbiter is the spaceplane component of the Space Shuttle, a partially reusable orbital spacecraft system that was part of the discontinued Space Shuttle program. Operated from 1981 to 2011 by NASA, the U.S. space agency, this vehicle could carry astronauts and payloads into low Earth orbit, perform in-space operations, then re-enter the atmosphere and land as a glider, returning its crew and any on-board payload to the Earth.

<span class="mw-page-title-main">Saturn V dynamic test stand</span> United States historic place

Saturn V dynamic test stand, also known as dynamic structural test facility, at the George C. Marshall Space Flight Center in Huntsville, Alabama is the test stand used for testing of the Saturn V rocket and the Space Shuttle prior to the vehicles' first flights. Designated building 4550, it stands 363 feet (111 m) tall and is 98 feet (30 m) square. Its central bay has maximum dimensions of 74 by 74 feet, and it is topped by a derrick capable of moving 200-ton objects in a 70-foot (21 m) radius. An elevator provides access to 15 levels in the structure, and a cable tunnel connects the building to control facilities in the space center's East Test Area.

<span class="mw-page-title-main">Saturn V dynamic test vehicle</span> Moon rocket test article in Huntsville, Alabama

The Saturn V dynamic test vehicle, designated SA-500D, is a prototype Saturn V rocket used by NASA to test the performance of the rocket when vibrated to simulate the shaking which subsequent rockets would experience during launch. It was the first full-scale Saturn V completed by the Marshall Space Flight Center (MSFC). Though SA-500D never flew, it was instrumental in the development of the Saturn V rocket which propelled the first men to the Moon as part of the Apollo program. Built under the direction of Dr. Wernher von Braun, it served as the test vehicle for all of the Saturn support facilities at MSFC.

<span class="mw-page-title-main">Approach and Landing Tests</span> Trials of the prototype Space Shuttle Enterprise

The Approach and Landing Tests were a series of sixteen taxi and flight trials of the prototype Space Shuttle Enterprise that took place between February and October 1977 to test the vehicle's flight characteristics. Of the sixteen taxi-tests and flights, eleven saw Enterprise remain mated to the Shuttle Carrier Aircraft (SCA), while the final five had the shuttle jettisoned from the SCA, with the on-board crew flying and landing the spacecraft.

<span class="mw-page-title-main">Saturn V</span> American super heavy-lift expendable rocket

The Saturn V is a retired American super heavy-lift launch vehicle developed by NASA under the Apollo program for human exploration of the Moon. The rocket was human-rated, had three stages, and was powered by liquid fuel. Flown from 1967 to 1973, it was used for nine crewed flights to the Moon, and to launch Skylab, the first American space station.

<span class="mw-page-title-main">Shuttle-Derived Heavy Lift Launch Vehicle</span> Space launch vehicle concept

The Shuttle-Derived Heavy Lift Launch Vehicle ("HLV") was an alternate super heavy-lift launch vehicle proposal for the NASA Constellation program. It was first presented to the Augustine Commission on 17 June 2009.

<span class="mw-page-title-main">Studied Space Shuttle designs</span> Launch vehicle study

During the lifetime of the Space Shuttle, Rockwell International and many other organizations studied various Space Shuttle designs. These involved different ways of increasing cargo and crew capacity, as well as investigating further reusability. A large focus of these designs were related to developing new shuttle boosters and improvements to the central tank, but also looked to expand NASA's ability to launch deep space missions and build modular space stations. Many of these concepts and studies would shape the concepts and programs of the 2000s such as the Constellation, Orbital Space Plane Program, and Artemis program.

References

  1. 1 2 Jenkins, Dennis R. (2001). Space shuttle: the history of the National Space Transportation System: the first 100 missions . D.R. Jenkins. pp.  215. ISBN   978-0-9633974-5-4.
  2. 1 2 3 Kesner, Kenneth (June 12, 2008). "Shuttle mockup undergoes repairs". The Huntsville Times . Archived from the original on December 4, 2011. Retrieved July 6, 2011.
  3. ↑ George C. Marshall Space Flight Center 1983. Pathfinder Ceremony. [press release] April 19, 1983.
  4. 1 2 "Spaceheads: Space Shuttle Pathfinder". Atomic Toasters. February 24, 2011. Archived from the original on August 29, 2011. Retrieved July 6, 2011.{{cite news}}: CS1 maint: unfit URL (link)
  5. 1 2 Phillips, Scott; Phillips, Dianne (2014). Remove Before Flight: Memoir of a Shuttle Team Member. Tate Publishing and Enterprises. pp. 147–153. ISBN   978-1-63367-500-1.
  6. ↑ "Pathfinder on Display". Tuscaloosa News . Associated Press. May 13, 1988. p. 5. Retrieved July 6, 2011.
  7. ↑ "NASA recalls museum's shuttle parts / Forward assemblies are needed for use in program's plans". Houston Chronicle . Reuters News Service. February 15, 1999. pp. A11. Archived from the original on June 5, 2011. Retrieved February 23, 2009.
  8. ↑ Pearlman, Robert Z. (August 24, 2020). "Rocket Center gets $500K grant to 'save' mock NASA space shuttle". Space.com. Retrieved September 19, 2022.
  9. ↑ Pearlman, Robert Z. (February 8, 2021). "Mock space shuttle Pathfinder lowered to ground for first time in 30 years". Space.com. Retrieved September 19, 2022.
  10. ↑ "'Pathfinder' hoisted back into place at U.S. Space & Rocket Center". August 28, 2024.

34°42′39″N86°39′10″W / 34.71079°N 86.65280°W / 34.71079; -86.65280

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.