T1 light tank

Last updated
T1 light tank / T1 Cunningham
Light Tank T1E1.jpg
A T1E1 light tank
Type Light tank
Place of origin United States
Service history
In servicePrototype only
Used by United States of America
Production history
DesignerU.S. Army, Ordnance Department
Designed1927
Manufacturer James Cunningham, Son and Company (Rochester, New York)
ProducedPrototypes only 1927–1932
No. built6
VariantsT1 prototype, T1E1, T1E2, T1E3, T1E4, T1E5, T1E6
Specifications
MassT1: 7.5 short tons (6.8  t)
T1E1: 8.3 short tons (7.5  t) 4.62 without modules
T1E2: 8.9 short tons (8.1 t)
T1E3: 8.5 short tons (7.7 t)
T1E4: 8.6 short tons (7.8 t)
T1E6: 9.95 short tons (9.03 t)
LengthT1: 12 ft 6 in (3.810 m)
T1E1, T1E2, T1E3: 12 ft 8+12 in (3.874 m)
T1E4: 15 ft 5 in (4.699 m)
WidthT1, T1E1, T1E3: 5 ft 10+12 in (1.791 m)
T1E2: 6 ft 2 in (1.880 m)
T1E4: 7 ft 2+34 in (2.203 m)
HeightT1: 7 ft 1+12 in (2.172 m)
T1E1, T1E3: 7 ft 1+58 in (2.175 m)
T1E2: 7 ft 6+12 in (2.299 m)
T1E4: 6 ft 6+34 in (2.000 m)
CrewTwo (commander/gunner, driver)

Armor T1, T1E1: 0.25–0.375 in (6.4–9.5 mm)
T1E2, T1E3, T1E4: 0.25–0.625 in (6.4–15.9 mm)
T1E6: 0.375–0.625 in (9.5–15.9 mm)
Main
armament
T1, T1E1: 37 mm M1918 short tank gun
T1E2, T1E3: 37 mm semi-automatic long-barreled Browning
T1E4, T1E6: 37 mm semi-automatic M1924
T1HMC: 75mm M1 howitzer
Secondary
armament
.30 caliber (.30-06 Springfield) M1919 Browning machine gun (coaxial)
Engine Gasoline, water-cooled.
Most T1 variants: Cunningham V8.
T1E6: American-LaFrance V12.
T1: 105 hp (78 kW)
T1E1: 110 hp (82 kW)
T1E2, T1E3: 132 hp (98 kW)
T1E4, T1E5: 140 hp (100 kW)
T1E6: 244 hp (182 kW)
SuspensionT1, T1E1, T1E2: Equalizing links with four 2-wheel bogies, no springs
T1E3: Coil springs with four 2-wheel bogies
T1E4, T1E6: Semielliptic leaf springs with two articulated 4-wheel bogies
Operational
range
T1: 65 mi (105 km)
T1E2, T1E3: 75 mi (121 km)
Maximum speed T1: 20 mph (32 km/h)
T1E1: 18 mph (29 km/h)
T1E2: 16 mph (26 km/h)
T1E3: 21.9 mph (35.2 km/h)
T1E4, T1E6: 20 mph (32 km/h)

The T1 light tank was a United States Army light tank of the late 1920s and early 1930s that was only built in prototype form. The tank was an Army design built by James Cunningham, Son and Company. Introduced in 1927, it was developed up through 1932 as a series of modified versions (T1E1, T1E2, T1E3, T1E4, T1E5, and T1E6). The tank was never mass-produced, nor was it ever used in combat.

Contents

Design and variants

The original T1 prototype, shown here with a wooden mockup turret Light Tank, T1 prototype.png
The original T1 prototype, shown here with a wooden mockup turret
A T1E1 tank Light Tank, T1E1.png
A T1E1 tank
The T1E2, here equipped with the old M1916 gun Light Tank, T1E2.png
The T1E2, here equipped with the old M1916 gun
The T1E3, with the long-barreled Browning gun Light Tank, T1E3.png
The T1E3, with the long-barreled Browning gun
The central-turret T1E4 Light Tank, T1E4.png
The central-turret T1E4
The T1E6, built by adding a larger V12 engine to the T1E4 Light Tank, T1E6.png
The T1E6, built by adding a larger V12 engine to the T1E4

Most versions of the T1 series of light tanks shared the same basic layout, with the engine mounted in the front and the turret, transmission and final drive all located in the rear. The exceptions were the T1E4 and T1E6, which moved the turret to the middle, the engine to the rear, and the transmission and final drive to the front, a configuration similar to later tanks. All T1 versions had a manually traversed turret armed with a 37 mm (1.46-inch) main gun and a coaxially mounted .30 caliber (7.62 mm) M1919 Browning machine gun, and all carried a crew of two: a commander who sat within the turret and worked the guns, and a driver seated just in front of the turret.

The single T1 prototype was built in 1927. Its main gun was a 37 mm M1918 short tank gun, a U.S. version of a French infantry support gun of World War I. This was a relatively low-velocity weapon, with a muzzle velocity of 1,200 ft/s (370 m/s). The tank's armor ranged from 0.25 in (6.4 mm) to 0.375 in (9.5 mm) in thickness, and the tank's overall weight was 7.5 short tons (6.8 metric tons ). It was powered by a 105 hp (78 kW) Cunningham water-cooled V8 gasoline engine which gave it a top speed of 20 mph (32 km/h). The transmission, made by Cotta, was a sliding-gear type with three forward gears and one reverse gear. After the prototype was evaluated, it was stripped down to its chassis, which was reused to test other vehicle types. [1] [2] [3]

The T1 prototype was followed in 1928 by the very similar T1E1. Four of these were built, making the T1E1 the only T1 version which was not built as a single prototype. The T1E1 was briefly standardized for production as the Light Tank, M1, but this was revoked after only a couple of months. The T1E1 had a few minor changes from the T1: the hull no longer projected forward of the tracks, and the fuel tanks were moved above the tracks. The top speed was reduced to 18 mph (29 km/h). [4] [5] [6]

The next version, the T1E2, was built in 1929, again as a single prototype. It had heavier armor, varying from 0.25 in (6.4 mm) to 0.625 in (15.9 mm) thick, and the tank's weight rose to 8.9 short tons (8.1 metric tons). The Cunningham V8 engine had its power boosted to 132 hp (98 kW), giving the T1E2 a slightly higher power-to-weight ratio than its predecessors; despite this, the maximum speed was only 16 mph (26 km/h) because of changes in the gear ratios. The 37 mm main gun was changed to a long-barreled Browning semi-automatic type, having a much higher muzzle velocity of 2,000 ft/s (610 m/s), though later the old M1918 model was reinstalled. [5] [7] [8]

In 1930 the Ordnance Department modified one of the T1E1 tanks to create the T1E3. In some ways this was a hybrid of the T1E1 and T1E2; it had the high-velocity long-barreled Browning gun, thickened armor, and more powerful engine of the T1E2, but it retained the hull, turret, dimensions, and transmission gear ratios of the T1E1. The T1E3 weighed 8.5 short tons (7.7 metric tons). Since it had the T1E2's more powerful engine and the T1E1 gearing, this gave it both a higher power-to-weight ratio and greater speed than any previous T1 version, with a maximum speed of 21.9 miles per hour (35.2 km/h). The most important feature of this version, however, was its suspension, which was completely redesigned. All previous T1 versions had a totally unsprung suspension which used multiple equalizing links between the bogies to spread out impacts from rough terrain. This still gave a very rough ride. The T1E3's suspension had coil springs and hydraulic shock absorbers, and its ride was much smoother. [5] [9] [10]

The T1E4, introduced in 1932, was another alteration of a T1E1 tank. Its transformation was much more radical, however, because the vehicle's layout was completely changed. The engine was moved to the rear, the transmission and final drive to the front, and the turret to the middle of the body. At 15 ft 5 in (4.70 m) in length, the T1E4 was nearly a quarter longer than preceding T1 versions. The T1E4 also got a new suspension copied exactly from the British Vickers 6-Ton light tank, which the Army had recently tested. [11] It featured semi-elliptic leaf springs and articulated four-wheel bogies. Harry Knox even dared to patent the vehicle, [12] infringing on John Valentine Carden's patent from 1929. [13] The main gun was replaced by the 37 mm semi-automatic gun M1924, whose muzzle velocity of 1,350 feet per second (410 m/s) was lower than that of the long-barreled Browning in the T1E2 and T1E3. The armor thickness was similar to the T1E2 and T1E3. The T1E4 had an overall weight of 8.6 short tons (7.8 metric tons). At first the T1E4 retained the engine from the T1E1, but this proved to be underpowered, so it was replaced by an improved Cunningham V8 producing 140 horsepower (104 kW), giving the T1E4 a top speed of 20 miles per hour (32 km/h). [14] [15] [16]

The T1E5, introduced around the same time as the T1E4, was yet another conversion of a T1E1, in this case with a new steering system. All previous T1 versions used a simple clutch-brake steering system which led to a loss of power while turning. The T1E5 replaced this with a controlled differential steering system from the Cleveland Tractor Company (a so-called "Cletrac" system). The engine was also replaced with the same 140 hp (104 kW) version as in the T1E4. Testing showed the controlled differential steering to be clearly superior to the clutch-brake system, and the Ordnance Department recommended its use for all tracked vehicles that could exceed six mph (ten km/h). [17]

The final T1 version produced, the T1E6, was introduced in 1932 as a further alteration of the T1E4. The Cunnigham V8 engine was replaced with a 244-horsepower (182 kW) V12 made by the American-LaFrance and Foamite Corporation. Even though the tank's weight increased to 9.95 short tons (9.03 metric tons), its more powerful engine gave it the best power-to-weight ratio of the entire T1 series. However, the maximum speed was still 20 miles per hour (32 km/h), and the larger V12 engine severely crowded the engine bay, making maintenance troublesome. The T1E6 kept the armament of the T1E4; the armor's maximum thickness remained unchanged, but the minimum thickness increased from 0.25 inches (6.4 mm) to 0.375 inches (9.5 mm). [18] [19]

Preservation

The T1E2 has been preserved, though without its guns. Previously it was on outdoor display at the U.S. Army Ordnance Museum at Aberdeen Proving Ground in Aberdeen, Maryland. [20] Due to that museum's closure in 2010, it has been moved to the U.S. Army Ordnance Training and Heritage Center at Fort Lee, Virginia, where it is presently in indoor storage and not publicly accessible. [21]

Related Research Articles

<span class="mw-page-title-main">Military engineering vehicle</span> Battlefield support vehicle

A military engineering vehicle is a vehicle built for construction work or for the transportation of combat engineers on the battlefield. These vehicles may be modified civilian equipment or purpose-built military vehicles. The first appearance of such vehicles coincided with the appearance of the first tanks, these vehicles were modified Mark V tanks for bridging and mine clearance. Modern military engineering vehicles are expected to fulfill numerous roles such as; bulldozer, crane, grader, excavator, dump truck, breaching vehicle, bridging vehicle, military ferry, amphibious crossing vehicle, and combat engineer section carrier.

<span class="mw-page-title-main">M26 Pershing</span> American medium/heavy battle tank (1944–1951)

The M26 Pershing is a heavy tank/medium tank formerly used by the United States Army. It was used in the last months of World War II during the Invasion of Germany and extensively during the Korean War. The tank was named after General of the Armies John J. Pershing, who led the American Expeditionary Force in Europe in World War I.

<span class="mw-page-title-main">MBT-70</span> American-West German main battle tank

The MBT-70 was an American–West German joint project to develop a new main battle tank during the 1960s.

Panzer VIII<i> Maus</i> WWII German super-heavy tank

Panzerkampfwagen VIII Maus was a German World War II super-heavy tank completed in July of 1944. It is the heaviest fully enclosed armored fighting vehicle ever built. Five were ordered, but only two hulls and one turret were completed, the turret being attached before the testing grounds were captured by advancing Soviet military forces.

<span class="mw-page-title-main">M18 Hellcat</span> American tank destroyer

The M18 Hellcat is a tank destroyer used by the United States Army in World War II and the Korean War. Despite being equipped with the same main gun as some variants of the much larger Sherman tank, the M18 attained a much higher top speed of up to 55 mph (89 km/h) by keeping armor to a minimum, and using the innovative Torqmatic automatic transmission.

<span class="mw-page-title-main">T28 super-heavy tank</span> Super-heavy tank, Assault gun

The T28 Super Heavy Tank was an American super-heavy tank/assault gun designed for the United States Army during World War II. It was originally designed to break through German defenses of the Siegfried Line and was later considered as a possible participant in the planned invasion of the Japanese mainland.

<span class="mw-page-title-main">M103 heavy tank</span> American heavy tank

The M103 Heavy Tank was a heavy tank that served in the United States Army and the United States Marine Corps during the Cold War. Introduced in 1957, it served until 1974, by which time evolution of the concept of a main battle tank considered heavy tanks obsolete.

<span class="mw-page-title-main">Valiant tank</span> British assault tank prototype

The Tank, Infantry, Valiant (A38) was a British tank design of the Second World War that only reached the prototype stage. It was intended to meet a specification for a well-armoured, light-medium tank, for use against Japanese forces in the South-East Asia theatre. The prototype demonstrated that the design was a failure and this sole example produced was retained by the School of Tank Technology as a lesson to its students.

<span class="mw-page-title-main">T95 medium tank</span> American prototype medium tank developed from 1955 to 1959

The T95 was an American prototype medium tank developed from 1955 to 1959. These tanks used many advanced or unusual features, such as siliceous-cored armor, new transmissions, and OPTAR fire-control systems. The OPTAR incorporated an electro-optical rangefinder and was mounted on the right side of the turret, and was used in conjunction with the APFSDS-firing 90 mm T208 smoothbore gun, which had a rigid mount without a recoil system. In addition, although the tanks were designed with a torsion beam suspension, a hydropneumatic suspension was fitted, and one of the tanks was fitted with a Solar Saturn gas turbine for demonstration purposes.

<span class="mw-page-title-main">M2 light tank</span> 1930s United States light tank

The M2 light tank, officially Light Tank, M2, was an American light tank of the interwar period which saw limited service during World War II. The most common model, the M2A4, was equipped with one 37 mm (1.5 in) M5 gun and five .30 cal M1919 Browning machine guns.

<span class="mw-page-title-main">T-44</span> Soviet medium tank

The T-44 was a medium tank developed and produced near the end of World War II by the Soviet Union. It was the successor to the T-34, offering an improved ride and cross-country performance, along with much greater armor. Designed to be equipped with an 85 mm main gun, by the time it was fully tested the T-34 had also moved to this weapon. Both tanks offered similar performance, so introducing the T-44 was not considered as important as increasing T-34 production. Fewer than 2,000 T-44s were built, compared to about 58,000 T-34s. Although the T-44 was available by the end of the war, it was not used in any battle. It was 1 ton lighter than the T-34-85 and slightly faster. The T-44 was heavily influential on the design of the T-54/55 main battle tank, most prominently lower hull and turret profiles. Also notable was the T-44-100, a 100mm D-10T-armed prototype, which would be the same 100mm gun mounted on the T-54/55, bar some minor changes.

<span class="mw-page-title-main">T30 heavy tank</span> American heavy tank

The Heavy Tank T30 was a World War II American tank project developed to counter new German tanks, such as Tiger I, Tiger II, and tank destroyers, such as the Jagdtiger, or Soviet heavy tanks, such as IS-2 or IS-3. The T30 was designed at the same time as the T29 Heavy Tank.

<span class="mw-page-title-main">M6 heavy tank</span> American heavy tank

The Heavy Tank M6 was an American heavy tank designed during World War II. The tank was produced in small numbers and never saw combat.

<span class="mw-page-title-main">T20 medium tank</span> Series of armored fighting vehicles designed by the United States

The Medium Tank T20, Medium Tank T22 and Medium Tank T23 were prototype medium tanks, developed by the United States Army during World War II. They were designed as successors to the M4 Sherman. The standard main weapon for production versions of these designs was to be the 76 mm M1.

<span class="mw-page-title-main">T29 heavy tank</span> American heavy tank

The Heavy Tank T29 was an American heavy tank project started in March 1944 to counter the appearance of the German Tiger II heavy tank. The T29 was not ready in time for the war in Europe, but it did provide post-war engineers with opportunities for applying engineering concepts to artillery and automotive components.

<span class="mw-page-title-main">AMX-40</span> Main battle tank

The AMX-40 was a French main battle tank developed by GIAT during the latter stages of the Cold War as an export tank to replace the earlier AMX-32. Designed to be an inexpensive tank orientated towards militaries with smaller defence budgets, the AMX-40 featured a lightly armoured hull and good mobility reminiscent of previous French MBTs with a powerful 120 mm cannon. It however failed to attract interest and sales, rendering the project a failure, being discontinued in 1990.

<span class="mw-page-title-main">Medium Mark III</span> British medium tank prototype

The Medium Mark III was a medium tank developed in the United Kingdom during the Interwar period.

<span class="mw-page-title-main">AMX-50</span> Medium Tank/heavy tank (lowered variant)

The AMX 50 or AMX-50 is a French heavy tank designed in the immediate post Second World War period. It was proposed as, in succession, the French medium, heavy, and main battle tank, incorporating many advanced features. It was cancelled in the late 1950s however, due to unfavourable economic and political circumstances after serious delays in development.

<span class="mw-page-title-main">M7 medium tank</span> WW2 American tank

The Medium Tank M7, initially Light Tank T7, was an American tank, originally conceived as an up-gunned replacement for the Light Tank M3/M5 ("Stuart"). The project developed to mount the same 75mm armament as the M4 Sherman while retaining the light weight and maneuverability of the M3 Stuart; however, during development the weight of the prototype surpassed the US Army's standard for light tanks and crossed into the medium tank category and was renamed. The M7 had significantly less armor than the M4 Sherman, no greater firepower, and held only a slight advantage in top speed. For these reasons, and because the M4 was already battle-tested and in full production, the M7 was cancelled in 1943.

<span class="mw-page-title-main">M13 Multiple Gun Motor Carriage</span> Self-propelled anti aircraft gun

The M13 Multiple Gun Motor Carriage (MGMC), otherwise known as the M13 half-track, was a self-propelled anti-aircraft gun used by the U.S. Army during World War II that was armed with two .50 caliber M2HB heavy-barrel Browning machine guns. Developed in response to a requirement for a mobile anti-aircraft (AA) vehicle, the vehicle was produced by the White Motor Company between July 1942 and May 1943. The only time it was ever used in combat was when the Americans landed at Anzio in January 1944. It was replaced by the more heavily armed M16 Multiple Gun Motor Carriage in April 1944.

References

  1. Hunnicutt, pages 40–41
  2. Jones et al., page 162
  3. AGF Board Number 2, page 33
  4. Hunnicutt, pages 41–44
  5. 1 2 3 Jones et al., page 164
  6. AGF Board Number 2, page 35
  7. Hunnicutt, pages 45–48
  8. AGF Board Number 2, page 39
  9. Hunnicutt, page 49
  10. AGF Board Number 2, page 43
  11. "Light Tanks T1E4 and T2E1: Experiments on an Ideal Platform".
  12. U.S. patent 1,952,078
  13. GB 324841
  14. Hunnicutt, page 50
  15. Jones et al., pages 164, 166
  16. AGF Board Number 2, page 57
  17. Hunnicutt, page 51
  18. Hunnicutt, pages 52–53
  19. AGF Board Number 2, page 59
  20. "Tank Profile". Preservedtanks.com. December 2008. Retrieved 9 July 2015.
  21. "Surviving rare US pre-1945 Tanks" (PDF). 14 May 2015. p. 2. Retrieved 9 July 2015.

Sources