Super-heavy tank

Last updated
British TOG II (80 tons) at The Tank Museum, Bovington TOG II.jpg
British TOG II (80 tons) at The Tank Museum, Bovington

A super-heavy tank is any tank that is notably beyond the standard of the class heavy tank in either size or weight relative to contemporary vehicles.

Contents

Programs have been initiated on several occasions with the aim of creating an extremely resilient vehicle for penetrating enemy formations without fear of being destroyed in combat; however, only a few examples were built, and there is little evidence of any super-heavy tank having seen combat. Examples were designed in the First and Second World Wars, along with a few during the Cold War.

History

First World War

Model of the Flying Elephant design, projected to weigh 100 tons Flying Elephant - Bovington - 1.jpg
Model of the Flying Elephant design, projected to weigh 100 tons

The first super-heavy tank was designed by the Russian naval engineer Vasily Mendeleyev who worked on the project from 1911 to 1915. The tank was envisioned to be invulnerable to almost all contemporary threats but remained on paper due to its high construction cost. [1] [2] Following the production of their first tanks, the British "Flying Elephant" was designed as a tank that would be resistant to artillery fire. Since mobility was more important than protection, and the tanks already developed were successful, work on the project was stopped. The German K-Wagen (Großkampfwagen) was a very heavy design carrying 4 guns and needing a crew of 27. Two of them were under construction when the war ended, and both were demolished.

In the early 1920s, the French produced the 70-tonne Char 2C. The ten tanks would see limited combat during the Battle for France in 1940,[ citation needed ] but were used mostly for propaganda purposes and the French tried to pull them out of combat zones.

The pre-Second World War design and prototype of TOG2 was heavier than any other contemporary tank used by United Kingdom and can also be considered a super-heavy tank.

Second World War

German super-heavy tank Panzer VIII Maus (188 tons) at the Kubinka Tank Museum. Metro-maus1.jpg
German super-heavy tank Panzer VIII Maus (188 tons) at the Kubinka Tank Museum.

During the Second World War, all of the major combatants introduced prototypes for special roles. Adolf Hitler was a proponent of "war winning" weapons and supported projects like the 188 tonne Maus, and even larger 1,000 tonne Landkreuzer P. 1000 Ratte.[ citation needed ] The British and Soviets all built prototype designs similar to the Jagdtiger, and the US was working on the project then known as T95 Gun Carriage, which was later changed to T28 super-heavy tank. However, not all of these designs were constructed, and most never passed the prototype stage.

Compared to other heavy tanks of the time, the Tiger II can be considered a super-heavy tank, considering that nearly all contemporary heavy tanks in service at the time were significantly lighter.[ speculation? ] However, during this period of the war Germany generally opted to field and design heavier vehicles. By late 1943, the Panzer IV tank had been significantly up-armed and up-armoured in contrast to its original role and production specifications (resulting in a considerably heavier tank), and Panthers were considered medium tanks despite being of similar mass and volume to contemporary heavy tanks of other nations involved in the conflict. As a result of the trend of generally increasing mass, by late-war German standards the Tiger II is a heavy tank. It is widely classified as a heavy tank by war historians, and nowhere near as heavy as the undisputedly super-heavy Maus.

Cold War

The idea of very heavy tanks saw less development after the Second World War, not least since the destructive force of tactical nuclear weapons would always overcome any feasible armour. Wartime advances in armour and propulsion technology allowed post-war heavy tanks developed by multiple nations to be significantly heavier than the average heavy tank fielded in World War II, while not reducing overall comparative mobility. Examples include Object 279 (Soviet Union), T30 Heavy Tank (United States) and Conqueror (Britain). All of these vehicles meet or exceed a weight 60 tonnes while still being capable of reaching speeds of 35 kph or faster. While the American T30 tank exceeded 85 tonnes while combat loaded, none of these vehicles can be considered a super-heavy Tank.[ citation needed ]

Main Battle Tanks were developed and used by every tank building nation during the Cold War, largely phasing out the doctrinal role and use of "Medium", "Heavy", "Cruiser" and "Infantry" tanks. For example, the last heavy tank in American service was the 65-ton M103, which was retired from US Army service in 1963 (and from US Marine service in 1973). [3] Fielding a tank larger than an MBT during this period would not provide a significant advantage to protection or offensive capability, considering the likely battlefield conditions and theaters of war. No super-heavy MBTs were produced during the Cold War.

Post Cold war

Further advances in armour technology have given the armour of late 20th century tanks the estimated equivalent of over a metre of rolled homogeneous armour (the primary type of armour used before the invention of composite armour, now used as a standard for comparison between different armour designs). This means adding more armour would not increase protection to any significant degree.[ citation needed ] Current development is instead focused on a combination of remaining undetected, interfering with tracking, and active countermeasures to neutralize the enemy weapon systems.[ citation needed ]

List of models

United Kingdom

Neither of the TOG prototypes were built the way they were designed; had the sponsons been added and the proper turret attached, their weight would have been different.

France
German Empire
Nazi Germany
Japanese Empire
Russian Empire
Soviet Union
United States

Related Research Articles

<span class="mw-page-title-main">Kliment Voroshilov tank</span> WWII Soviet heavy tank

The Kliment Voroshilov tanks are a series of Soviet heavy tanks named after the Soviet defence commissar and politician Kliment Voroshilov who operated with the Red Army during World War II. The KV tanks were known for their heavy armour protection during the early stages of the war, especially during the first year of the German invasion of the Soviet Union. In certain situations, even a single KV-1 or KV-2 supported by infantry could halt German formations. The German Wehrmacht at that time rarely deployed its tanks against KVs, as their own armament was too poor to deal with the "Russischer Koloss" – "Russian Colossus".

Panzer VIII<i> Maus</i> WWII German super-heavy tank

Panzerkampfwagen VIII Maus is a German World War II super-heavy tank completed in July of 1944. It is the heaviest fully enclosed armored fighting vehicle ever built. Five were ordered, but only two hulls and one turret were completed, the turret being attached before the testing grounds were captured by advancing Soviet military forces.

<span class="mw-page-title-main">AMX-13</span> French light tank

The AMX-13 is a French light tank produced from 1952 to 1987. It served with the French Army, as the Char 13t-75 Modèle 51, and was exported to more than 26 other nations. Named after its initial weight of 13 tonnes, and featuring a tough and reliable chassis, it was fitted with an oscillating turret built by GIAT Industries with revolver-type magazines, which were also used on the Austrian SK-105 Kürassier. Including prototypes and export versions, over a hundred variants exist, including self-propelled guns, anti-aircraft systems, APCs, and ATGM versions.

<span class="mw-page-title-main">Char 2C</span> French super-heavy tank

The Char 2C, also known as the FCM 2C, was a French post WWI heavy tank landship, later considered a super-heavy tank. It was developed during World War I but not deployed until after the war. It was, in total volume or physical dimensions, the largest operational tank ever made.

<i>Tanque Argentino Mediano</i> Argentine medium tank

The Tanque Argentino Mediano is a medium tank in service with the Argentine Army. Lacking the experience and resources to design a tank, the Argentine Ministry of Defense contracted German company Thyssen-Henschel. The vehicle was developed by a German and Argentine team of engineers, and was based on the German Marder infantry fighting vehicle chassis.

<span class="mw-page-title-main">German tanks in World War II</span> Front line armored fighting vehicles used by Nazi Germany

Nazi Germany developed numerous tank designs used in World War II. In addition to domestic designs, Germany also used various captured and foreign-built tanks.

<i>Entwicklung</i> series Late-War German tank project

The Entwicklung series, more commonly known as the E-Series, was a late-World War II attempt by Nazi Germany to produce a standardised series of tank designs. There were to be standard designs in five different weight classes from which several specialised variants were to be developed. Design standardisation was envisioned to bring improvements over extreme complexity of previous tank designs that resulted in poor production rates and mechanical unreliability.

Panzer VII <i>Löwe</i> German super-heavy tank project

The Panzerkampfwagen VII Löwe (Lion) was a design for a super-heavy tank created by Krupp for the German government during World War II. The project, initially code-named VK 70.01 (K), never left the drawing board, and was dropped on 5–6 March 1942, in favor of Porsche's heavier Panzer VIII Maus.

<span class="mw-page-title-main">Char B1</span> WW2 French heavy tank

The Char B1 was a French heavy tank manufactured before World War II.

<span class="mw-page-title-main">Tanks of the interwar period</span>

Tanks were initially deployed in World War I, engineered to overcome the deadlock of trench warfare. Between the two world wars, tanks were further developed. Although they had demonstrated their battlefield effectiveness, only a few nations had the industrial resources to design and build them. During and after World War I, Britain and France pioneered tank technology, with their models generally serving as a blueprint for other countries. However, this initial advantage would slowly diminish during the 1930s, shifting in favor of the Soviet Union and, to a lesser degree, Nazi Germany.

<span class="mw-page-title-main">FCM F1</span> French super-heavy tank project

The FCM F1 was a French super-heavy tank developed during the late Interbellum by the Forges et Chantiers de la Méditerranée (FCM) company. Twelve were ordered in 1940 to replace the Char 2C, but France was defeated before construction could begin, a wooden mock-up being all that was finished. The FCM F1 was large and elongated, and had two turrets: one in front and one in the back, with a single high-velocity gun in each turret. The rear turret was superfiring, meaning it was raised higher and fired over the top of the forward one, a common practice in naval vessels. The vehicle was intended to be heavily armoured. Its size and protection level made it by 1940, at about 140 tons, the heaviest tank ever to have actually been ordered for production. Despite two engines its speed would have been low. The primary purpose of the tank was to breach German fortification lines, not to fight enemy tanks. The development path of the FCM F1 was extremely complex, due to the existence of a number of parallel super-heavy tank projects with overlapping design goals, the specifications of which were regularly changed. For each project in turn several companies submitted one or more competing proposals.

The Landkreuzer P. 1000 "Ratte" was a design for a 1000-ton tank to be used by Germany during World War II which may have been proposed by Krupp director Edward Grote in June 1942, who had already named it "Landkreuzer". Submitted designs and drawings of the vehicle went under the names OKH Auftrag Nr. 30404 and E-30404/1, which were presented in December 1942. The tank was planned to be 1000 tonnes, far heavier than the Panzer VIII "Maus", the heaviest tank ever built. The project gained the approval of Adolf Hitler, who had expressed interest in the development of the tank but was cancelled by Minister of Armaments Albert Speer in early 1943.

<span class="mw-page-title-main">ARL 44</span> French heavy tank/tank destroyer

The ARL 44 was a French heavy tank and tank destroyer, the development of which started just before the end of the Second World War. Only sixty of these tanks were ever completed, from 1949 onwards. The type proved to be unsatisfactory and only entered limited service. The tank was phased out in 1953.

The Char G1 was a French replacement project for the Char D2 medium tank. Several prototypes from different companies were developed from 1936 onwards, but not a single one had been fully completed at the time of the Fall of France in 1940. The projects represented some of the most advanced French tank design of the period and finally envisaged a type that would have been roughly equal in armament and mobility to later World War II standard tanks of other nations, such as the Soviet T-34 and the American M4 Sherman, but possessing several novel features, such as gun stabilisation, a semi-automatic loader and an optical rangefinder.

The Landkreuzer P 1500 Monster was a purported German pre-prototype super-heavy self-propelled gun designed during World War II. While it is mentioned in a number of popular works about World War II projects, there is no solid documentation for the program’s existence, and it may have only been a semi-serious proposal, or even an outright hoax, much like the Panzer IX and Panzer X.

<span class="mw-page-title-main">AMX-40</span> Main battle tank

The AMX-40 was a French main battle tank developed by GIAT during the latter stages of the Cold War as an export tank to replace the earlier AMX-32. Designed to be an inexpensive tank orientated towards militaries with smaller defence budgets, the AMX-40 featured a lightly armoured hull and good mobility reminiscent of previous French MBTs with a powerful 120 mm cannon. It however failed to attract interest and sales, rendering the project a failure, being discontinued in 1990.

<i>Panzerkampfwagen</i> E-100 German super-heavy tank prototype

The Panzerkampfwagen E-100 (TG-01) was a German super-heavy tank design developed towards the end of World War II. It was the largest of the Entwicklung series of tank designs which was intended to improve German armored vehicle production through standardization on cheaper, simpler to build vehicles. By the end of the war, the chassis of the prototype E-100 had been partially completed; it was shipped to the United Kingdom for trials, but was later scrapped.

<span class="mw-page-title-main">AMX-50</span> Medium Tank/heavy tank (lowered variant)

The AMX 50 or AMX-50 is a French heavy tank designed in the immediate post Second World War period. It was proposed as, in succession, the French medium, heavy, and main battle tank, incorporating many advanced features. It was cancelled in the late 1950s however, due to unfavourable economic and political circumstances after serious delays in development.

<span class="mw-page-title-main">Tanks of France</span>

French development into tanks began during World War I as an effort to overcome the stalemate of trench warfare, and largely at the initiative of the manufacturers. The Schneider CA1 was the first tank produced by France, and 400 units were built. The French also experimented with various tank designs, such as the Frot-Laffly landship, Boirault machine and Souain experiment. Another 400 Saint-Chamond tanks were manufactured from April 1917 to July 1918 but they were underpowered and were of limited utility because the caterpillar tracks were too short for the tank's length and weight. The most significant French tank development during the war was the Renault FT light tank, which set the general layout for future tank designs and was used or redesigned by various military forces, including those of the United States.

The AMX 38 was a prototype French tank designed in 1937 at the AMX works. Designed as AMX's response to the 20-tonne tank programme intended to replace the aging Char D2, it was a faster and heavier alternative to Renault R35, in practice a cross-over between a light tank and medium tank.

References

  1. Svirin, Mikhail (2009). Танковая мощь СССР[Tank Power of the USSR] (in Russian). Moscow: Yauza, Eksmo. pp. 15–17. ISBN   978-5-699-31700-4.
  2. Kholyavsky, Gennady (1998). Энциклопедия танков[Encyclopedia of Tanks] (in Russian). Minsk: Kharvest. p. 25. ISBN   985-13-8603-0.
  3. Hunnicutt, R. P. (1984). Patton: A History of the American Main Battle Tank. Presidio Press. p. 78. ISBN   0-89141-230-1.
  4. Taki’s Imperial Japanese Army page: Super-Heavy Tank "O-I"
  5. Estes 2014, p. 37.
  6. Zaloga & Grandsen 1984, p. 85.
  7. "Design history". Archived from the original on February 24, 2019. Retrieved February 12, 2023.

Bibliography