Tallinn TV Tower

Last updated

Tallinn TV tower
Tallinn TV tower.JPG
Tallinn TV tower
Tallinn TV Tower
General information
Typeobservation, telecommunications
Location Tallinn, Estonia
Coordinates 59°28′16.34″N24°53′15″E / 59.4712056°N 24.88750°E / 59.4712056; 24.88750
Construction started1975
Completed1980
OwnerLevira
Height
Antenna spire314 m (1,030.2 ft)
Technical details
Lifts/elevators2
Design and construction
Architect(s) David Baziladze and Juri Sinis

Tallinn TV Tower (Estonian : Tallinna teletorn) is a free-standing structure with an observation deck, built to provide better telecommunication services for the 1980 Moscow Summer Olympics regatta event (see Sailing at the 1980 Summer Olympics). It is located near the suburb Pirita, six km north-east of the Tallinn city center. With its 313 m (1030.2 ft), the TV tower is the tallest nonbuilding structure in Tallinn. The tower was officially opened on 11 July 1980. The viewing platform at a height of 170 metres was open to the public until 26 November 2007, when it was closed for renovation. The tower began receiving visitors again on 5 April 2012. The building is administered by the public company Levira (formerly Estonian Broadcasting Transmission Center Ltd) and is a member of the World Federation of Great Towers. [1]

Contents

The architects were David Baziladze and Juri Sinis, the engineers Vladimir Obydov and Yevgeny Ignatov. The construction work was supervised by Aleksander Ehala.

The cornerstone was laid on 30 September 1975, and the building was inaugurated 11 July 1980 (although the first transmission took place in 1979). The tower body was constructed of reinforced concrete rings 50 cm thick that weigh a total of 17,000 tonnes, and the total tower weight is approximately 20,000 tonnes. The tower survived a fire during construction.

The observation deck on the 21st floor, originally designed to have a rotating section, is located 170 m above ground and has a diameter of 38 m. The tower was closed to the public on 26 November 2007. Before it was closed, tickets were priced at 60 Estonian kroon and, aside from an infrequently used concrete and metal staircase, the observation deck was accessed by two elevators. The Vilnius TV tower has a similar architectural design but features a rotating observation deck 165 m above ground.

The structure consists of a 190-metre reinforced concrete tower and a 124-metre metal mast on top of it. Under the tower is a two-storey building with equipment rooms, entrance halls and a conference centre. The diameter of the tower at its base is 15.2 metres and the wall thickness is 50 cm. The diameter of the tower from 140 metres up is 8.2 metres. A total of 10,000 m3 of concrete and 1,900 tonnes of steel were used in the construction.

The Tallinn TV tower was reopened on 5 April 2012 with completely new interior design made by KOKO Arhitektid.

Local guide books advertise the observation deck's views of Tallinn and extending to the Gulf of Finland. The tower is described as having a 1980s Soviet feel and a restaurant is located on the observation floor. Bullet holes dating from the Soviet coup attempt of 1991 are still visible at the base of the tower.

1991 defense of Estonia

A widely known account tells of a handful of radio operators who in 1991 risked their lives to protect the free media of the reborn Republic of Estonia from Soviet troops. The defenders placed a matchbox between the elevator door and frame in such a manner that the elevator wouldn't work, leaving the approximately 1,000 tower steps as the only route to the top for the Soviets. The operators also had an oxygen-removing fire-fighting system at their disposal. Triggering the system would have asphyxiated everyone in the tower, including the defenders themselves. However, it is not known if the system was operational or if the threat to deploy it was a bluff. The story is well known in Estonia; it is also part of the movie August 1991 and is mentioned at length in the documentary The Singing Revolution .

Tallinn TV tower's structural features

Thirty-two building enterprises participated in the construction of the Tallinn TV tower. The TV tower was designed by specialists at the State Design Institute of the Ministry of Communications in Moscow. The chief engineer was Yevgeny Ignatov, the chief designer was Vladimir Obydov and the architects were Juri Sinis and David Basiladze.

The team faced two challenges: to choose a suitable tower structure and select the best location for it. The structure selected was a freely supported base part from reinforced concrete and steel upper part serving as the antenna, with a total height of 314 metres. The internal space of such a TV tower made from reinforced concrete is sufficient for installation of all the necessary equipment and addition of a viewing platform with a restaurant, accessed via a high-speed lift. The height of the tower is such that it is capable of transmitting excellent radio and television signals to distances of up to 90 kilometres in ideal weather conditions.

Several factors were taken into account for the location: the required distance from densely populated urban areas to ensure proper signal reception, geological features of the local soil, distance from the airport, and impact on Tallinn's skyline. The chosen spot was 8 kilometres from the city centre, in a rest and recreation zone not far from the botanical garden and a motor sports club. The location is 23 metres above sea level. The tower, clearly visible from the city and from the sea, dominates the surrounding landscape and affects the local architecture.

The structure of the tower can be divided into three sections: the foundation, the tower itself from reinforced concrete (190 m) and the steel antenna (124 m). From 150–182 metres the tower contains a superstructure that is 38 metres in diameter, housing the viewing platform, the restaurant and the equipment room for commercial radio stations. The two-storey building that surrounds the base of the tower is also 38 metres in diameter and contains technical and auxiliary facilities. The foundation slab made from reinforced concrete is 38 metres in diameter, 2.5 metres thick and buried 8.5 metres below ground level. This slab supports a tower of reinforced concrete that is 15.2 metres in diameter at the base and only 8.2 metres in diameter at a height of 180 metres. The wall thickness in the lower part is 500 mm and 350 mm in the upper part; this is to ensure tower stability even in strong storm conditions. Before 1967 all tall structures had been built in Estonia in compliance with the safety requirements applicable to structures situated in areas with the second wind strength level. After a storm in 1967, with the wind speed reaching 42 metres per second, the TV tower was designed in compliance with the fourth wind strength level requirements.

The mass total of the tower is over 20,000 tons. The centre of gravity of the structure is in the base of the tower, which is why it could not fall over even if the foundation slab were on the surface of the ground.

The general contractor was the Tallinn Construction Trust and the subcontractors were the Reinforced Concrete Construction Trust, the Metal Structures Trust and the Radio Construction Trust. The work was commissioned by the TV Tower Construction Directorate of the Ministry of Communications of the Estonian SSR, with Vootele Tõsine as its director.

Construction work

Several new technical solutions were implemented during the construction of the TV tower. The reinforced concrete tower itself was assembled using the sliding mold method. The concrete mold was installed at a height of 2.5 metres; then the armature was inserted and the concrete poured. After that the concrete form was shifted upwards, narrowed to the new diameter and the new section of reinforced concrete created. Today the rings resulting from this process can still be seen at 2.5-metre intervals on the tower. The concrete was poured continuously for 8 months, with the tower gradually rising above the landscape. The builders used M-400 concrete based on oil shale ash and Portland cement. This concrete had been developed by the scientists at the Tallinn Polytechnical Institute under the supervision of Verner Kikas. The concrete was designed to withstand 300 frost resistance cycles. Subsequent inspections have revealed that the strength of this concrete is even higher than stipulated.

The antenna part of the structure is made from steel cylinders. The metal antenna was installed using the ejection method. At first a smaller-diameter cylinder was lifted to the necessary spot; then over it was placed a larger-diameter cylinder and the smaller cylinder was pushed up through it with blocks and winches. The assembly was completed by attaching to each cylinder the television and ultra short-wave transmitter vibrators. The upper metal framework, weighing over 120 tons, was assembled on the ground around the base of the tower and then raised to 170 metres. From start to finish all building work was supervised by foreman Aleksander Ehala and team master Väino Saar. They often had to solve complicated problems and the designers always agreed with their solutions[ citation needed ].

The TV tower is regularly checked for geodetic compliance: foundation settling, vertical deviation, condition of reinforced concrete and metal components, and other parameters. The allowed sway of the top of the TV tower due to wind is 1.5 metres; of the viewing platform, 90 cm. Besides winds, the tower is affected by solar heating, resulting in the top “drawing” a peculiar curve.

The steel part, from 190 m to 260 m, has a lift for two persons and hatches for access to the external platforms for the purpose of inspection and repairs of the antenna equipment. In the tower below the antenna section there is also a staircase with 1,050 steps from the basement to a height of 190 metres.

Important dates

Incidents at the TV tower

Remote view of Tallinn TV Tower EU-EE-Tallinn-Pirita.JPG
Remote view of Tallinn TV Tower

In April 1980 team master Saar prevented a major construction accident. A welder's negligence had caused the cables in the tower shaft to catch fire. The draught was strong because the structure acted like a giant chimney. The fire thus progressed quickly up the tower from the point of origin on the 5th storey. Saar managed to outrace the conflagration and cut the cables on the 23rd storey, thus preventing the fire from reaching the metal part of the tower. Had the antenna structure been subjected to heat from the fire, it might have collapsed. The fire damage was repaired within one month.

Over the decades the antenna equipment on the TV tower underwent a major overhaul. Due to the introduction of the FM waveband the radio antennas were rebuilt. But an accident ensued during installation of a 12-metre pipe-shaped antenna for the 45th television channel transmitter at the very tip of the tower. Jüri Makarov was a prominent local businessman who created a new television station, Tipp TV, and that included installation on the TV tower of an Italian-made transmitter for the channel. The corresponding antenna, a 12-metre pipe, had been purchased in the United States, and Makarov arranged to install it with the aid of a helicopter commissioned from St. Petersburg. The helicopter successfully removed an old radio antenna from the top of the tower. In the early morning on 19 May 1994 the helicopter took off with the new antenna. The helicopter, with the antenna suspended under it on a cable, attempted to manoeuvre to insert the end of the antenna into its slot. The wind was disruptive, its force reaching 8[ clarification needed ]. When the antenna touched the tower, the pilots mistakenly assumed that it had gone into the slot and released the cable. The falling antenna hit the restaurant roof and grazed the railing. The roof of the viewing platform and its windows shattered. The antenna itself broke as well. A new antenna was later sent and specialists successfully installed it under the supervision of leading engineer Vitali Lonkin. Saar oversaw the repairs to the restaurant roof.

Technical specifications

As of February 2010, the Tallinn TV tower transmits the following radio and TV stations:

Antenna
FM transmitters:

TV transmitters:

GSM transceivers:

See also

Related Research Articles

<span class="mw-page-title-main">CN Tower</span> Communications and observation tower in Toronto, Canada

The CN Tower is a 553.3 m-high (1,815.3 ft) concrete communications and observation tower in Toronto, Ontario, Canada. Completed in 1976, it is located in downtown Toronto, built on the former Railway Lands. Its name "CN" referred to Canadian National, the railway company that built the tower. Following the railway's decision to divest non-core freight railway assets prior to the company's privatization in 1995, it transferred the tower to the Canada Lands Company, a federal Crown corporation responsible for the government's real estate portfolio.

A chimney is an architectural ventilation structure made of masonry, clay or metal that isolates hot toxic exhaust gases or smoke produced by a boiler, stove, furnace, incinerator, or fireplace from human living areas. Chimneys are typically vertical, or as near as possible to vertical, to ensure that the gases flow smoothly, drawing air into the combustion in what is known as the stack, or chimney effect. The space inside a chimney is called the flue. Chimneys are adjacent to large industrial refineries, fossil fuel combustion facilities or part of buildings, steam locomotives and ships.

<span class="mw-page-title-main">Sky Tower (Auckland)</span> Observation and communication tower in Auckland, New Zealand

The Sky Tower is a telecommunications and observation tower in Auckland, New Zealand. Located at the corner of Victoria and Federal Streets within the city's CBD, it is 328 metres (1,076 ft) tall, as measured from ground level to the top of the mast, making it the second tallest freestanding structure in the Southern Hemisphere, surpassed only by the Autograph Tower in Jakarta, Indonesia, and the 28th tallest tower in the world. Since its completion in 1997, the Sky Tower has become an iconic landmark in Auckland's skyline, due to its height and design. It was the tallest freestanding structure in the Southern Hemisphere from 1996 to 2022.

Ostankino Tower is a television and radio tower in Moscow, Russia, owned by the Moscow branch of unitary enterprise Russian TV and Radio Broadcasting Network. Standing 540.1 metres (1,772 ft), it was designed by Nikolai Nikitin. As of 2022, it is the tallest free-standing structure in Europe and 12th tallest in the world. Between 1967 and 1974, it was the tallest in the world. The tower was the first free-standing structure to exceed 500 m (1,600 ft) in height. Ostankino was built to mark the 50th anniversary of the October Revolution. It is named after the surrounding Ostankino district of Moscow.

<span class="mw-page-title-main">Fernsehturm Berlin</span> Television tower in Berlin

The Fernsehturm in central Berlin was constructed between 1965 and 1969 by the government of the German Democratic Republic, or East Germany, as both a functional broadcasting facility and a symbol of Communist power.

<span class="mw-page-title-main">Torre de Collserola</span> Television tower, observation tower in Catalonia, Spain

Torre de Collserola is a uniquely designed tower located on the Tibidabo hill in the Serra de Collserola, in Barcelona, Catalonia, Spain. It was designed by the architect Sir Norman Foster and by the Spanish civil engineers Julio Martínez Calzón and Manuel Julià Vilardell. This emblematic tower was built in 1991 by the construction company Cubiertas y MZOV S.A. for the 1992 Summer Olympics. It features a pod for floor space like many towers but uses guy wires for lateral support like a mast. Mainly used as a TV and radio transmitter, this futuristic design provides the highest viewpoint over the city. The top antenna reaches 288.4 m (946 ft) and the top of the pod, which has thirteen floors, reaches 152 m (499 ft). The highest point of this tower is the highest place one could be in the city of Barcelona. The tenth floor of the pod is open to the public.

<span class="mw-page-title-main">Donauturm</span> Building in Vienna

The Donauturm is a tower in Vienna, the tallest structure in Austria at 252 metres (827 ft), and is the 68th tallest tower in the world. Opening in April 1964, the tower is located near the north bank of the Danube River in the district of Donaustadt.

<span class="mw-page-title-main">Fernsehturm Stuttgart</span> Telecommunications, Observation tower in Stuttgart, Germany

Fernsehturm Stuttgart is a 216.61 m (710.7 ft) telecommunications tower in Stuttgart, Germany. It was the first telecommunications tower in the world constructed from reinforced concrete, and it is the prototype for many such towers worldwide. Although controversial at first, it quickly became a well known landmark of Stuttgart and a tourist attraction.

<span class="mw-page-title-main">Rheinturm</span> Telecommunications tower in Germany

The Rheinturm is a 240.5-metre-high (789 ft) concrete telecommunications tower in Düsseldorf, capital of the federal state (Bundesland) of North Rhine-Westphalia, Germany. Construction commenced in 1979 and finished in 1981. The Rheinturm carries aerials for directional radio, FM and TV transmitters. It stands 172.5 metres high and houses a revolving restaurant and an observation deck at a height of 168 metres. It is the tallest building in Düsseldorf.

<span class="mw-page-title-main">Florianturm</span> Telecommunications tower and landmark of Dortmund, Germany

The Florianturm is a telecommunications tower and landmark of Dortmund (Germany). It is named after St. Florian, the patron saint of gardeners.

<span class="mw-page-title-main">Ještěd Tower</span> Television transmitter and hotel near Liberec, Czech Republic

Ještěd Tower is a television transmitter on top of Mount Ještěd near Liberec in the Czech Republic. Measuring 94 m (308 ft), it is made of reinforced concrete shaped in a "hyperboloid" form. The tower was designed by architect Karel Hubáček, who was assisted by Zdeněk Patrman, involved in building statics, and by Otakar Binar, who designed the interior furnishing. It took the team three years to finalize the structure design (1963–1966). The construction itself took seven years to finish (1966–1973).

<span class="mw-page-title-main">Rousse TV Tower</span> TV tower in Rousse, Bulgaria

The Rousse TV Tower is a 204-metre-high TV tower built of reinforced concrete at Rousse, Bulgaria. Originally, the structure was constructed as a 206-metre-high TV tower with a cafe/restaurant on top and was the tallest one on the Balkan peninsula until 2001. In the 1990s an additional antenna was added bringing the height to 210 metres. And, in March 2007, the antenna was reconstructed bringing its height to 204 metres.

<span class="mw-page-title-main">Vilnius TV Tower</span> Observation, telecommunications, attraction in Vilnius, Lithuania

The Vilnius TV Tower is a 326.5 m (1,071 ft) high tower in the Karoliniškės microdistrict of Vilnius, Lithuania. It is the tallest structure in Lithuania, and the 29th tallest self-supporting tower in the world. It belongs to the SC Lithuanian Radio and Television Centre.

<span class="mw-page-title-main">Yerevan TV Tower</span> TV and Radio broadcast in Yerevan, Armenia

Yerevan TV Tower is a 311.7-metre (1,023 ft) high lattice tower built in 1977 on Nork Hill near downtown Yerevan, Armenia. It is the tallest structure in the Caucasus, fourth-tallest tower in Western Asia, sixth-tallest free-standing lattice tower and thirty-eighth-tallest tower in the world.

<span class="mw-page-title-main">Observation tower</span> Architectural structure

An observation tower is a structure used to view events from a long distance and to create a full 360 degree range of vision to conduct long distance observations. Observation towers are usually at least 20 metres (66 ft) tall and are made from stone, iron, and wood. Many modern towers are also used as TV towers, restaurants, or churches. The towers first appeared in the ancient world, as long ago as the Babylonian Empire.

<span class="mw-page-title-main">Radio masts and towers</span> Tall structure designed to support antennas

Radio masts and towers are typically tall structures designed to support antennas for telecommunications and broadcasting, including television. There are two main types: guyed and self-supporting structures. They are among the tallest human-made structures. Masts are often named after the broadcasting organizations that originally built them or currently use them.

<span class="mw-page-title-main">Bungsberg telecommunications tower</span> Telecommunications tower

The Bungsberg telecommunications tower, also known as the Fernmeldeturm Schönwalde, is a 179-metre-high telecommunications tower situated on the Bungsberg, a hill which is the highest point in the north German state of Schleswig-Holstein.

<span class="mw-page-title-main">Mont Pèlerin TV Tower</span>

The Mont Pèlerin TV Tower is a transmission tower situated on Mont Pèlerin in the area of Chardonne, north of Vevey and is the only TV tower of Switzerland equipped with an observation deck, which is accessible by an elevator. Including this mast, the height of the tower is 122.6 metres.

<span class="mw-page-title-main">Çamlıca Tower</span> TV tower in İstanbul, Turkey

Küçük Çamlıca TV Radio Tower, or simply Çamlıca Tower, is a telecommunications tower with observation decks and restaurants on Little Çamlıca Hill in Üsküdar district of Istanbul, Turkey.

References

  1. "Tallinn TV-Tower - The World Federation of Great Towers". World Federation of Great Towers. Retrieved 1 September 2016.