Thingmaker

Last updated
Thingmaker
Other namesCreepy Crawlers
TypeArt and Craft molding
Company
Availability1964–present

Thingmaker, also called Creepy Crawlers, is an activity toy made by Mattel, beginning in 1964. The toy consists of a series of die-cast metal moulds resembling various bug-like creatures, into which is poured a liquid chemical substance called "Plasti-Goop", which comes in assorted colours. The mould is then heated to about 390 °F (199 °C) in an open-face electric hot plate oven. The Plasti-Goop is cured by the heat, and when cooled forms semi-solid, rubbery replicas which can be removed from the mould.

Contents

Concept

The concept of the Thingmaker was introduced in 1963, as part of Mattel's Vac-U-Maker set. This omnibus toy combined the new moulds and Plasti-Goop technology with the existing Vac-U-Form machine, a vacuum forming toy, which molded simple sculptures by heating thin sheets of plastic, then using a vacuum pump to form the softened plastic over hard plastic forms. Following this introduction period, the Thingmaker portion was spun off as a separate set, and launched as the "Creepy Crawlers" line. [1]

Mattel packaged molds from various sets to be sold separately, and also combined molds into larger omnibus editions, encompassing several themes into one set, under names such as "Triple Thingmaker", "Super Thingmaker" and "Every Thingmaker". Mattel marketed numerous Thingmaker sets as follow-ups to the original "Creepy Crawlers" throughout the 1960s, using various themes aimed at both boys and girls, as well as exclusive single mould sets, including Superman and Tarzan, and original concepts including "Squirtles" and "Gangly Danglies".

Varieties of Thingmaker mould sets

Vintage Mattel Thingmaker toy with aluminum molds, c. 1967 Vintage Mattel Thingmaker Creepy Crawlers toy with aluminum molds (16228310124).jpg
Vintage Mattel Thingmaker toy with aluminum molds, c. 1967

In 1973 the newly created Consumer Product Safety Commission took over the regulation of toys from the Food and Drug Administration. New safety regulations were issued concerning toys that used heat. According to Peter Davis, product safety manager for Mattel, "Although the Thing-Maker (which involved dropping plastic into heated molds) was heralded by educators as a terrific educational toy, it was discontinued because it used heat." [2]

In 1978 Mattel released an updated (and safer) model of their "Creepy Crawlers" toy. Called the "Thingmaker II", this version used a very differently formulated Plasti-Goop, and used plastic moulds, into which was poured the heated Plasti-Goop. In this set one heated the Plasti-Goop and poured it into the green plastic mould(s) to cool; the moulds were not put into the heater, which looked like a small cauldron. The reformulated Plasti-Goop did not work well and the process of making bugs, etc. with these sets was typically slow, taking an hour or so to make a creation. These sets did not sell as well as their predecessors, and the attempted revival was a short-lived one. Only two sets were produced—Creepy Crawlers and Flower Fun.

ToyMax revival

An early version of the ToyMax "Magic Maker" Creepy Crawlers Oven Set Toymax Creepy Crawlers.jpg
An early version of the ToyMax "Magic Maker" Creepy Crawlers Oven Set

After being out of production for more than a decade, the "Creepy Crawlers" brand was brought back in 1992 by a New York-based company called ToyMax. With much stricter safety regulations in place, the new version of the Creepy Crawlers set re-introduced the metal moulds and earlier Plasti-Goop-type formulation, but now used a lightbulb-powered "Magic Maker" heater, with a heat-triggered door designed to remain closed until the mould had cooled sufficiently to be handled safely.

The name "Magic Maker", as well as the new oven design, were borrowed from an earlier 1980s-era toy that melted clear coloured plastic granules to form sun catcher window decorations. Over the next five years new mould designs were released as well as new mould packs. Apparently Mattel, the originator of Creepy Crawlers, had let its trademarks lapse, for many of the original Mattel concepts were revisited, such as "Creeple Peeple", "Mini-Dragons", "Eeeks" (ToyMax changed the spelling), and "DollyMaker". Numerous licenses were also employed, resulting in mould designs featuring such characters as Bugs Bunny, The Mighty Morphin Power Rangers, Batman, Woody, Buzz Lightyear, Rex, Hamm and the Green Army Men from Toy Story , and The Mask. The new formula Plasti-Goop had an array of colours, and several varieties, including

Toward the end of the ToyMax run, the oven was redesigned to incorporate a fold-down hinged door, and required less at-home assembly. Releases of new mould packs became more and more sporadic over time. In 1997, a wave of moulds (and a new oven set) based on the second Jurassic Park film, and an original line of "Mutant Squad" Plasti-Goop-based figures (three of the six planned "Mutants" were never released) heralded the end of another era of "Thingmaking", and the beginning of a third period of hiatus. In 2001, ToyMax tried again, with both a "Creepy Crawlers" and a "DollyMaker" line, but this revival was brief.

After ToyMax

After Toymax, a third company, Jakks Pacific, based in California, began producing Creepy Crawlers toys. Though most of the Jakks Pacific line are re-issued mould designs from the extensive ToyMax offerings, they have also marketed new character moulds featuring SpongeBob SquarePants and Hello Kitty. New releases of oven sets and mould packs have been intermittent. Christmas 2006 saw release of three "new" mould designs by Jakks Pacific, though the numbering of these moulds suggests they be previously unreleased designs from the ToyMax era.

In 2007, Jakks Pacific released a Pokémon-themed Creepy Crawlers Oven and Mould Paks, and in late 2008, another Oven Set based on the Star Wars: Clone Wars license was released, again in time for Christmas.

In the Autumn of 2010, Toys "R" Us stores released a line of exclusive "Creepy Crawlers" Activity Toys (produced by Jakks-Pacific) that use injection moulding and hollow, two-sided moulds to create bugs and spiders in solid, wall-crawling and gut-filled "squishable" varieties. Reviews on the Toys "R" Us site indicate numerous problems with the moulds leaking in the Creepy Crawlers injector models.

As of Spring 2012, the once-exclusive Jakks-Pacific "Creepy Crawlers" sets and refill accessories were available at other outlets, such as K-Mart and Target.

Cancelled 3D printer

In 2016, Mattel announced a new version of the ThingMaker, a 3D printer line. [3] Its release was originally scheduled for Autumn 2016 and later pushed to 2017. When the printer wasn't released, Mattel replied to a Twitter comment on November 20, 2017, saying plans for the 3D printer version were under review, and a firm release date was not set and updates would be posted on their website. [4] Since then, the website went offline. In another Twitter reply, on March 28, 2019, it was noted that Mattel had apologized, having discontinued and cancelled the project. [5]

In other media

Television show

ToyMax developed their own entertainment property based on the Creepy Crawlers concept, which became a Saturday morning cartoon — the series lasted two seasons (23 episodes, including one unaired episode that later saw release on video) and a line of 12 action figures that each came with a metal mould, with which to make unique accessories for the figures.

Film adaptation

In May 2018, it was announced that a film based on Creepy Crawlers is in development. The film rights were acquired by Paramount Pictures. It's scheduled to be produced by Paramount Players and Original Film. The upcoming film's producers include Neal H. Moritz, Marc Gurvitz and Toby Ascher. Stephen Berman, chairman and CEO of JAKKS Pacific, will serve as executive producer. [6]

Related Research Articles

<span class="mw-page-title-main">Cabbage Patch Kids</span> American doll brand

Cabbage Patch Kids are a line of cloth dolls with plastic heads first produced by Coleco Industries in 1982. They were inspired by the Little People soft sculptured dolls sold by Xavier Roberts as collectibles. The brand was renamed 'Cabbage Patch Kids' by Roger L. Schlaifer when he acquired the exclusive worldwide licensing rights in 1982.

<span class="mw-page-title-main">Injection moulding</span> Manufacturing process for producing parts by injecting molten material into a mould, or mold

Injection moulding is a manufacturing process for producing parts by injecting molten material into a mould, or mold. Injection moulding can be performed with a host of materials mainly including metals, glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers. Material for the part is fed into a heated barrel, mixed, and injected into a mould cavity, where it cools and hardens to the configuration of the cavity. After a product is designed, usually by an industrial designer or an engineer, moulds are made by a mould-maker from metal, usually either steel or aluminium, and precision-machined to form the features of the desired part. Injection moulding is widely used for manufacturing a variety of parts, from the smallest components to entire body panels of cars. Advances in 3D printing technology, using photopolymers that do not melt during the injection moulding of some lower-temperature thermoplastics, can be used for some simple injection moulds.

Boglins were a series of toy puppets distributed by Mattel. They were created by Tim Clarke, Maureen Trotto, and Larry Mass, and licensed by Seven Towns. The original run of Boglins was released in 1987, coinciding with a "creatures" craze that included Ghoulies, Critters, and Gremlins. Boglins were goblin-themed hand puppets made of flexible rubber and could be manipulated to represent speech and facial expressions. Several series of large and small Boglins were released until 1994, with additional aquatic, Halloween, and baby themed Boglins released later into the line. Small solid 'Mini-Boglins' were also produced, akin to the Kinkeshi figures also from the 1980s.

Thermoforming is a manufacturing process where a plastic sheet is heated to a pliable forming temperature, formed to a specific shape in a mold, and trimmed to create a usable product. The sheet, or "film" when referring to thinner gauges and certain material types, is heated in an oven to a high-enough temperature that permits it to be stretched into or onto a mold and cooled to a finished shape. Its simplified version is vacuum forming.

<span class="mw-page-title-main">Jakks Pacific</span> American Toy Company

Jakks Pacific, Inc. is an American company that designs and markets toys and consumer products, with a range of products that feature numerous children's toy licenses. The company is named after its founder, Jack Friedman, who had previously founded LJN and THQ and presided over the company until retiring as CEO and chairman after March 31, 2010, a month before his death on May 3, 2010.

Major Matt Mason was an action figure created by Mattel. He was an astronaut who lived and worked on the Moon. When introduced in 1966, the figures were initially based on design information found in Life Magazine, Air Force Magazine, Jane's, and other aviation- and space-interest periodicals. Later, the line attempted to transition into the realm of science fiction.

Polly Pocket is a toy line of dolls and accessories first founded and designed by Chris Wiggs in 1983 and licensed by Bluebird Toys from 1989 until both entities/properties were acquired by Mattel in 1998.

A celebrity doll is a doll modeled after a celebrity.

<span class="mw-page-title-main">Rotational molding</span> Making hollow plastic objects in a heated mold

Rotational molding involves a heated mold which is filled with a charge or shot weight of the material. It is then slowly rotated, causing the softened material to disperse and stick to the walls of the mold forming a hollow part. In order to form an even thickness throughout the part, the mold rotates at all times during the heating phase, and then continues to rotate during the cooling phase to avoid sagging or deformation. The process was applied to plastics in the 1950s but in the early years was little used because it was a slow process restricted to a small number of plastics. Over time, improvements in process control and developments with plastic powders have resulted in increased use.

<span class="mw-page-title-main">Batman action figures</span>

Batman action figures have been produced since the 1940s. These action figures, inspired by the character's appearance in comics and serials, were created by DC Comics and manufactured by various toy companies. These figures were made of various materials such as wood, tin, and plastic. They were typically between 6 and 8 inches in height and featured movable joints that allowed them to be posed in various positions.

<i>Thomas & Friends</i> merchandise

Merchandise for the Thomas & Friends franchise has been produced to capitalize on the success of the television series Thomas & Friends. Whilst merchandise was produced alongside due to the popularity of the first of The Railway Series by the Rev. W. Awdry since 1945, and the original broadcast of the television series in 1984 in the United Kingdom, large numbers of manufacturers have sought to produce Thomas-branded items after the television series was broadcast in the United States and Japan.

Creepy Crawlers is an animated television series from 1994, produced by Saban Entertainment, that aired in syndication in the United States.

Elliot Handler was an American inventor, businessman, and the co-founder of Mattel. With his wife, Ruth Handler, he developed some of the biggest-selling toys in American history, including Barbie, Chatty Cathy, Creepy Crawlers, and Hot Wheels.

<span class="mw-page-title-main">Plastisol</span>

A plastisol is a colloidal dispension of small polymer particles, usually polyvinyl chloride (PVC), in a liquid plasticizer. When heated to around 180 °C (356 °F), the plastic particles absorb the plasticizer, causing them to swell and fuse together forming a viscous gel. Once this is cooled to below 60 °C (140 °F) it becomes a flexible, permanently plasticized solid product. This process is called 'curing'.

The Vac-u-form, was a toy invented by Eddy Goldfarb and released by Mattel in the 1960s around 1961 with the trademark filed on October 8, 1962.

WWE action figures are poseable action figures based on wrestlers and personalities of WWE. They are currently manufactured by Mattel and have formerly been manufactured by LJN, Jakks Pacific and Hasbro.

<span class="mw-page-title-main">Jack Friedman</span> American businessman (1939–2010)

Jack Friedman was an American entrepreneur, businessman, veteran of the toy and video game industries, and a philanthropist. Regarded as an influential member in the toy and video game industries, Friedman founded the three toy companies LJN, THQ, and Jakks Pacific; LJN and THQ later switched focus to video games.

Toys-to-life is a video game feature using physical figurines or action figures to interact within the game. These toys use a near field communication (NFC), radio frequency identification (RFID), or image recognition data protocol to determine the individual figurine's proximity, and save a player's progress data to a storage medium located within that piece. It was one of the most lucrative branches of the video game industry especially during the late 1990s and 2010s, with the Skylanders franchise alone selling more than $3 billion worth over the course of four years.

References

  1. ↑ Mansour, David (2005). From Abba to Zoom: A Pop Culture Encyclopedia of the Late 20th Century. Andrews McMeel. p. 100.
  2. ↑ "Careful Toy Choice Advised", The Wichita Eagle , 30 Nov. 1975, p. 44.
  3. ↑ "Matel unveils rebooted Thingmaker as 3D printer". MSN. USA Today . 12 March 2016. Retrieved 29 April 2024.
  4. ↑ MATTEL [@Mattel] (November 20, 2017). "Hi, there. Product plans for ThingMaker and 3-D printing are still being reviewed, and a firm date has not been set yet. We're working hard to deliver a product your family will love! Once we have more information, we'll let you know at http://ThingMaker.com" (Tweet). Retrieved 29 April 2024– via Twitter.
  5. ↑ MATTEL [@Mattel] (March 28, 2019). "Vince, after a great deal of thought and consideration, Mattel has reached the difficult decision to discontinue its work on the Thing Maker. We're so sorry we didn't have better news" (Tweet). Retrieved 29 April 2024– via Twitter.
  6. ↑ Justin Kroll (May 29, 2018). "Paramount Players Lands Film Rights to Creepy Crawlers Toy Brand (EXCLUSIVE)". Variety . Retrieved July 13, 2018.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.