Abarth Simca 2000

Last updated
Abarth Simca 2000
Abarth Simca 2000 front.jpg
Overview
Manufacturer Abarth and Simca
Production1963-1965 [1] [2]
Assembly Turin, Italy
Body and chassis
Layout RR layout
Related Fiat Abarth OT 1300
Powertrain
Power output185–204 hp (136–150 kW) [3]
Dimensions
Length3.609 m (11.84 ft)
Width1.48 m (4.9 ft)
Height1.199 m (3.93 ft)

The Abarth Simca 2000 was an Italian high-performance automobile produced in the 1960s as a collaborative project of the Simca and Abarth companies in Turin, Italy.

Product description

The A-S 2000 was a coupé powered by a four-cylinder Abarth engine of 1946.27 cc, rated at 202 PS (149 kW). Its maximum speed was listed as 168 mph (270 km/h). Its overall length was 11.84 ft (3.61 m), overall width was 4.85 ft (1.48 m), height was 3.93 ft (1.20 m), its wheelbase was 6.86 ft (2.09 m), its front track was 4.167 ft (1.270 m), and its rear track was 4.27 ft (1.30 m). Its fuel tank held 6.6 imperial gallons, although optional tanks of 12.1, 18.7 and 24.2 imperial gallons were also available. Its empty weight was 1,518 lb (689 kg).

The radiator-cooling inlet was a low-set oval in a forward-thrusting nose; there was no obvious forward bumper. The two headlights were set under transparent fairings. The bonnet was long and markedly sloped. Its windshield was more highly sloped than most contemporary vehicles. An upturned air deflector was mounted atop the rear trunk.

The gasoline tank was filled through a lid-covered cap located at the upper-right hand corner of the nearly-flat rear window.

Related Research Articles

<span class="mw-page-title-main">Porsche 356</span> 1948–1965 sports car

The Porsche 356 is a sports car that was first produced by Austrian company Porsche Konstruktionen GesmbH (1948–1949), and then by German company Dr. Ing. h. c. F. Porsche GmbH (1950–1965). It was Porsche's first production automobile. Earlier cars designed by the Austrian company include Cisitalia Grand Prix race car, the Volkswagen Beetle, and Auto Union Grand Prix cars.

<span class="mw-page-title-main">Abarth</span> Italian car manufacturer

Abarth & C. S.p.A. is an Italian racing- and road-car maker and performance division founded by Italo-Austrian Carlo Abarth in 1949. Abarth & C. S.p.A. is owned by Stellantis through its Italian subsidiary. Its logo is a shield with a stylized scorpion on a yellow and red background.

<span class="mw-page-title-main">Hatchback</span> Car body configuration with a rear door

A hatchback is a car body configuration with a rear door that swings upward to provide access to the main interior of the car as a cargo area rather than just to a separated trunk. Hatchbacks may feature fold-down second-row seating, where the interior can be reconfigured to prioritize passenger or cargo volume.

<span class="mw-page-title-main">Coupe</span> Car body style

A coupe or coupé is a passenger car with a sloping or truncated rear roofline and two doors.

<span class="mw-page-title-main">Apal</span> Small-scale Belgian automobile company

Apal is a small-scale automobile company originally from Belgium.

<span class="mw-page-title-main">Fastback</span> Type of styling to rear car bodywork

A fastback is an automotive styling feature, defined by the rear of the car having a single slope from the roof to the tail. The kammback is a type of fastback style.

<span class="mw-page-title-main">Nissan Skyline</span> Series of automobiles manufactured by Nissan

The Nissan Skyline is a brand of automobile originally produced by the Prince Motor Company starting in 1957, and then by Nissan after the two companies merged in 1967. After the merger, the Skyline and its larger counterpart, the Nissan Gloria, were sold in Japan at dealership sales channels called Nissan Prince Shop.

<span class="mw-page-title-main">Liftback</span> Variation of hatchback with a sloping roofline between 45 and 5 degrees

A liftback is a variation of a hatchback car body style, with a more gently sloping roofline, roughly between 45 and 10 degrees, whereas traditional or archetypal hatchback designs tend to use a 45 degree to near vertical slope on the top-hinged tailgate.

<span class="mw-page-title-main">Sunbeam Alpine</span> Two seat automobile built 1953–1975

The Sunbeam Alpine is a two-seater sports roadster/drophead coupé that was produced by the Rootes Group from 1953 to 1955, and then 1959 to 1968. The name was then used on a two-door fastback coupé from 1969 to 1975. The original Alpine was launched in 1953 as the first vehicle from Sunbeam-Talbot to bear the Sunbeam name alone since Rootes Group bought Clément-Talbot, and later the moribund Sunbeam from its receiver in 1935.

<span class="mw-page-title-main">Fiat 850</span> Motor vehicle

The Fiat 850 is a small rear-engine, rear-wheel-drive car manufactured and marketed by Italian car manufacturer Fiat from 1964 to 1973.

<span class="mw-page-title-main">Chrysler 180</span> Car model built by Chrysler

The Chrysler 180 was the base name for a series of large saloon cars produced by Chrysler Europe. Resulting from joining the development efforts of Rootes Group and Simca, the car was produced from 1970 to 1975 in Poissy, France, and later in Chrysler's subsidiary Barreiros' factory in Spain. The Chrysler 180 was also the base for the medium-sized model built by Chrysler Australia, the Chrysler Centura.

<span class="mw-page-title-main">Simca 1000</span> Motor vehicle

The Simca 1000, or Simca Mille in French, is a small, boxy rear-engined four-door saloon, manufactured for 18 years by French automaker Simca, from 1961 to 1978.

<span class="mw-page-title-main">Simca Aronde</span> Motor vehicle

The Simca Aronde is an automobile which was manufactured by the French automaker Simca from 1951 to 1964. It was Simca's first original design, as well as the company's first unibody car. "Aronde" means "swallow" in Old French and it was chosen as the name for the model because Simca's logo at that time was a stylized swallow.

<span class="mw-page-title-main">Matra 530</span> Motor vehicle

The Matra M530 is a sports car created and built by the French engineering group Matra.

<span class="mw-page-title-main">Ruf RK</span> Motor vehicle

The Ruf RK Coupe and RK Spyder are mid-engine sports cars made by Ruf Automobile in collaboration with Italian design house Studiotorino. The RK Spyder was introduced in 2005 in Turin and the RK Coupe was introduced the following year in 2006 in California.

<span class="mw-page-title-main">Mebetoys</span>

Meccanica Bessana Toys, was an Italian toy manufacturer that produced die-cast scale model cars during the 1960s and 1970s.

<span class="mw-page-title-main">Fiat-Abarth 750</span>

The Fiat-Abarth 750 is a compact sporting series of automobiles manufactured by the Italian manufacturing firm Abarth & C. of Turin, Italy in the 1950s and 1960s. The cars used the floorpan and often the bodywork of the Fiat 600 but were fitted with Abarth's modified engines. Abarth also offered a number of bodyworks by other designers for the 750 and its derivatives, most famously Zagato but also Allemano and others.

Autobleu was a French automotive parts manufacturer based in Paris. They produced a variety of components, but were best known for their intake and exhaust manifolds. They also built a small number of customized cars based on models from larger manufacturers.

<span class="mw-page-title-main">Abarth Simca 1300 GT</span> Motor vehicle

The Abarth-Simca 1300 GT is a sports racing car built by Abarth from 1962 to 1965.

<span class="mw-page-title-main">Abarth Simca GT</span> Sports car

Abarth Simca GT refers to a number of sports cars produced by Italian manufacturer Abarth between 1962 and 1965.

References

  1. "Abarth Simca 2000 GT" . Retrieved 21 May 2022.
  2. "1965 Abarth Simca 2000 GT Corsa" . Retrieved 21 May 2022.
  3. "Abarth Simca 2000 – Car Profile" . Retrieved 1 July 2022.