The Fiat-Abarth 750 is a compact sporting series of automobiles manufactured by the Italian manufacturing firm Abarth & C. of Turin, Italy in the 1950s and 1960s. The cars used the floorpan and often the bodywork of the Fiat 600 but were fitted with Abarth's modified engines. Abarth also offered a number of bodyworks by other designers for the 750 and its derivatives, most famously Zagato but also Allemano and others.
There were also other derivatives, which were sold as the Fiat-Abarth 850, Fiat-Abarth 1000, and Abarth Monomille (1000 pushrod). For the 1960 Gran Turismo racing season the classes were changed to under 700 or under 1000 cc, while national competitions also featured an 850 cc class. Abarth responded with engines suitable for the new classes, although the 700 may have only been built in one or two examples. Depending on the state of tune, these then received additional letters to their names, such as TC or TCR. A twin-cam version, the "Bialbero", was also produced.
Abarth's first model based on the Fiat 600 was the 210 A Spyder, which first appeared in late 1955 - soon after the introduction of the 600 itself. Using the standard 600's bottom plate and a modified engine, its sleek bodywork was by Boano. It has a low-cut windscreen, vestigial rear fins, and a single centre-mounted headlight. [1] The 633 cc (38.6 cu in) engine offers 32 CV (24 kW) while an enlarged 710 cc (43 cu in)39 CV (29 kW) option was also available. Both engines have a 9.5:1 compression ratio, dual exhausts, and reach their max power at 6900 rpm. Wheelbase is 195 in (4,953.0 mm) and dry weight 409 kg (902 lb); top speed for the larger model was claimed to be 150 km/h (93 mph). [1]
In 1956 Abarth presented twin concept models, based on the Fiat 600 chassis and its 747 cc (45.6 cu in) engine. Both were designed by Franco Scaglione at Bertone. Abarth 215 A Coupé was a closed variant presented at the Geneva Motor Show and the following open-top spider had its first premiere in Turin. Both cars had large protruding tailfins and pop-up headlights. [2]
Abarth offered their 750 cc derivative of the Fiat 600 both with the original ("Berlina") bodywork and with more slippery bodywork from others. Most famous is the aerodynamic Zagato-bodied range of Abarth 750 cars. As a footnote, failing Fiat modifiers Siata were owned by Abarth from 1959 until 1961. Siata's own 600-based "Amica" design and 735 cc (44.9 cu in) engine conversion was thus marketed as the Siata-Abarth 750 during those years, but there was little to no actual Abarth involvement with these cars.
Appearing in early 1956, Abarth's 750 Gran Turismo Derivazione was the first Abarth product to use the standard Fiat bodywork. Fiat delivered these cars incomplete, to make it easier and more cost effective for Abarth to carry out their performance modifications. Rather than the 633 cc (38.6 cu in) original or Abarth's own 710 cc (43 cu in) model, the engine now displaced 747 cc (45.6 cu in) thanks to a one millimetre wider bore and a stroke increased by four millimetres (0.04 and 0.16 in respectively). Sharper cams, lighter flywheel, a bigger carburetor, and myriad other traditional tuning tricks were employed; as a result power nearly doubled, up from 21.5 to 40 CV (16 to 29 kW). Claimed top speed was 80 mph (129 km/h). [3]
Originally the aerodynamic 750 Zagato "double bubble" had a single-cam engine. This was first presented at the 1955 Turin Motor Show. The original model was also offered in a more luxurious variant for export (called "America", as it was almost strictly meant for the United States) and a stripped down model with lower, uncovered headlamps and smaller taillights for the domestic Italian market. The "America" also has a different layout around the rear license plate. [4] The all-aluminium bodywork has Zagato's famous "double-bubble" design and Abarth's tuned derivazione engine with 43 CV (32 kW; 42 hp). Aside from the floorpan, not much of the Fiat 600 remains in use for these cars. By the time of the appearance of the Abarth Zagato Record Monza 750 Bialbero, the bodywork had been unified into a separate model with a rather large hump on the engine lid, made necessary by the taller twin-cam motor. There were then three distinct models: 750 "Double Bubble," 750 Record Monza, and 750 "Sestriere." The Sestriere had a single cam pushrod engine, and the majority were built with a steel body, a very small number of alloy cars, and there is one aluminium car known to exist today. The Sestriere had upright headlights, and two very large air intakes on the engine lid, much wider than a double bubble. (The Sestriere was believed to be the last model produced for Abarth by Zagato, due to disagreements between Abarth and Zagato.) [5] [6]
The 750 GT Bialbero model appeared at the 1958 Turin Auto Show; along with various alterations to the bodywork it has the new twin-cam engine with 57 CV (42 kW; 56 hp) at 7000 rpm. The Fiat 600 engine presented certain challenges for Gioacchino Colombo in designing a twin-cam head: an engine mount on the rear face of the engine blocked the natural routing for the cam chain, while other restrictions made it impossible to use a classic crossflow design; instead, the carburetors were mounted between the camshafts, on top of the engine, rotated about 45 degrees to provide access to the spark plugs. [7] This location no longer worked as the carburetors and inlets grew larger, and Abarth developed a distinctive banana-shaped intake manifold which allowed for two carburetors to be perched to either side above the engine. This, by necessity, made the Bialbero engine quite tall, necessitating sizable bulges and bumps in the bodywork on lower designs like the Zagato or various Spiders. [8]
The first Bialbero series constituted 100 cars, enough to homologate the car for the Gran Turismo competition category. [9] 750 Bialbero-equipped Fiat-Abarth Zagato Record Monzas featured a lower roof with no bubbles and one single centered air scoop on the engine lid. "The Record Monza" was the most successful racing Abarth in the USA with the Franklin D. Roosevelt Jr Racing team, (Abarth cars winning over 700 races worldwide), including both Sebring with the 750 cc (46 cu in) Bialbero engine and Daytona under-1,000 cc (61 cu in) races in 1959 widely believed to have had the first 982 cc (59.9 cu in) Bialbero engine.
There was also a very rare Zagato Spyder version produced, only between two and four examples are believed to have been built. [10] This model was first shown at the 1957 Turin Auto Show, and it was then shown again the next year. [10] The design has the usual sleek Zagato front end, with distinct fins at the rear. The bump on the engine lid came in for some period critique for disfiguring the overall design. [11] Max power from Abarth's 747 cc (45.6 cu in) engine is 44 CV (32 kW; 43 hp), enough for a top speed of 153 km/h (95 mph) in a period road test or 145 km/h (90 mph) according to Abarth themselves. [10] [11] [12] The Spyder's list price in Italy was the same as for the berlinetta Zagato, 1,535,000 Lira in 1958. [4] The 1958 Turin Show car had the twin cam engine, with similar performance to the berlinetta, although the "little castle" disfiguring the engine lid was even larger on this model. [13]
To suit newly reshuffled Gran Turismo racing categories, a 698 cc (42.6 cu in) version was introduced at the 1959 Turin Auto Show. The Twin Cam ("Bialbero") model produces 64 CV (47 kW; 63 hp) at 7,100 rpm. [14] One of these, with Zagato-style bodywork, did start at the 1960 Le Mans but it only managed 31 laps. This model may have remained a single example, while the 850 and 1000 models which arrived around the same time went on to be built for many more years.
The Abarth 850 Spider has bodywork by Allemano and was first shown in the spring of 1960. [15] The engine is a Fiat-based 850 single-cam unit which develops 52 CV (38 kW; 51 hp) CUNA at 6,000 rpm. Overall length is 3,600 mm (140 in), overall width is 1,420 mm (56 in), height is 1,200 mm (47 in), and the weight is 610 kg (1,345 lb). The claimed top speed is 154 km/h (96 mph). [15] A coupé model was also later developed, more elegant and comfortable than Zagato's version but heavier and less sporting.
Allemano's bodywork was later also made available with the larger 1000 engine. This bodywork was also used by Cisitalia's Argentinian daughter company, who built the car in a variety of models with 760, 800, or 850 cc engines.
Fiat-Abarth 850 TC | |
---|---|
![]() | |
Overview | |
Manufacturer | Abarth |
Production | 1961–1969 [16] |
Body and chassis | |
Class | Group 2 touring car [17] |
Layout | RR |
Powertrain | |
Engine | 847 cc I4 |
Transmission | 4-speed manual |
Dimensions | |
Wheelbase | 2,000 mm (78.7 in) |
Length | 3,530–3,607 mm (139.0–142.0 in) |
Width | 1,390–1,499 mm (54.7–59.0 in) |
Height | 1,301–1,400 mm (51.2–55.1 in) |
Curb weight | 585–610 kg (1,290–1,345 lb) |
The Fiat-Abarth 850TC Berlina (Turismo Competizione, or "touring competition") was introduced towards the end of 1960. Originally built to Group 2 touring car specifications, it was manufactured between 1961 and 1969. [18] [19] It uses the Fiat 600 bodywork with some modifications, most notably a boxlike structure ahead of the front bumper which held the engine's oil cooler. The rear fenders were usually blistered, so as to accommodate larger wheels. The engine is a four-cylinder model based on a Fiat unit, with 847 cc capacity and 52 CV (38 kW; 51 hp) CUNA rating. Overall length is 3,090 mm (122 in), overall width is 1,400 mm (55 in), height is 1,380 mm (54 in), wheelbase is 2,000 mm (80 in), and its front and rear track are 1,160 mm (46 in). The fuel tank holds 5.9 imperial gallons. The 850TC remained in the price lists until 1966.
In 1962 the 850TC Nürburgring was introduced, with 55 CV (40 kW) at 6500 rpm. The name was intended to celebrate the class victory of an Abarth 850TC at the 1961 Nürburgring 500 km race. [20] There followed the 850TC/SS with two more horsepower; this was renamed the 850TC Nürburgring Corsa towards the end of the year.
Between 1962 and 1971 the 850cc and 1,000cc class cars won hundreds of races all over the World and were commonly called "Giant Killers" due to their superior performance over much larger cars. This culminated in a famous dispute with SCCA authorities in the USA when Alfred Cosentino (FAZA) was banned from running his 1970 Fiat Abarth Berlina Corsa 1000 TCR "Radiale" engine because his car was faster (mainly in wet conditions) than many of its V8-powered contemporaries. The SCCA authorities dictated FAZA and Cosentino be forced to use an earlier, non-Radiale, engine design from the 1962 model in their cars. They still achieved 51 victories from 53 races, the most victories in SCCA racing history, thereby cementing the superiority of the Fiat Abarth Berlina Corsa over larger and more powerful cars.
The first Fiat 600-based Abarth to be fitted with the larger 982 cc development of the 600 engine was the Zagato-bodied Berlinetta, similar in appearance to the 750 and 850 Monza models. It was first shown at the October 1960 Paris Motor Show and produces 91 CV (67 kW; 90 hp) at 7,100 rpm. [21] Twin Weber carburetors and a 9.3 to 1 compression ratio help reach this considerable output for a one-litre engine. Claimed top speed is 205 km/h (127 mph). [21] A bewildering variety of slightly different bodystyle elements appeared over the years, with covered and uncovered headlights, different engine lids, taillights, and window arrangements, as well as a later long-tailed design which also received a longer nosecone. Since these cars were largely handbuilt and often to order, it is hard to say what is original and what may have been modified after many years of competition.
The Monomille also has the pushrod 982 cc motor and was sold alongside the twin-cam Bialbero as a lower-priced, less complicated alternative. Bodywork was in the style of Zagato's, although it was executed by Abarth themselves. The cars carry a "Carrozzeria Abarth" badge.
It may seem strange that a 1000 cc economy car with 85 hp (63 kW) can be considered a racing car, but in its day, the Abarth 1000 TC and all its variants were fierce racing machines with international success and acclaim. The Fiat-Abarth 1000 TC [22] [23] is a special high-performance racing-oriented version of the Fiat 600, [24] designed and developed by Italian manufacturer Abarth, and built to Group 2 (and later Group 5) touring car specifications. The first 1000 TC was built in 1964; there was also a development called the 1000 TCR which used Abarth's Radiale cylinder head for even more power. [25] [26]
This is a list of the various models available that retained the standard "Berlina" bodywork: [27]
Abarth & C. S.p.A. is an Italian racing- and road-car maker and performance division founded by Italo-Austrian Carlo Abarth in 1949. Abarth & C. S.p.A. is owned by Stellantis through its Italian subsidiary. Its logo is a shield with a stylized scorpion on a yellow and red background.
Zagato is a coachbuilding company. The design center of the company is located in Terrazzano, a village near Rho, Lombardy, Italy.
The Fiat 131 is a family car manufactured and marketed by Fiat from 1974 to 1984 after its debut at the 1974 Turin Motor Show. Available as a two-door and four-door saloon and 5-door estate across a single generation, the 131 succeeded the Fiat 124.
The Fiat 600 is a small, rear-engined city car and economy family car, made by Italian carmaker Fiat from 1955 to 1969 — offered in two-door fastback sedan and four-door Multipla mini MPV body styles. The 600 is considered a pop icon of the Italian economic miracle, and the three-row seating Multipla, though diminutive and odd-looking, is seen as one the first mass-produced minivans.
The Lancia Flavia is an executive car produced by Lancia in Italy from 1961 to 1971. Production continued as the Lancia 2000 from 1971 to 1975.
The Lancia Rally was a mid-engine sports car and rally car built by Lancia in the early 1980s to compete in the FIA Group B World Rally Championship. Driven by Markku Alén, Attilio Bettega, and Walter Röhrl, the car won Lancia the manufacturers' world championship in the 1983 season. It was the last rear-wheel drive car to win the WRC.
The Fiat 124 Sport Spider is a convertible sports car marketed by Fiat for model years 1966–1985. Designed by and manufactured at the Italian carrozzeria Pininfarina factory, the monocoque, front-engined, rear-drive Sport Spider debuted at the November 1966 Turin Auto Show with styling by Tom Tjaarda.
The Fiat 850 is a small rear-engine, rear-wheel-drive car manufactured and marketed by Italian car manufacturer Fiat from 1964 to 1973.
The Fiat 2300 is a six-cylinder executive car which was produced by Italian automotive manufacturer Fiat between 1961 and 1968. The 2300 was made as saloon, estate car and coupé. The 2300 saloon is noteworthy as in 1966 it became the first Fiat model to be available with an automatic transmission.
The Alfa Romeo Giulietta is a family of automobiles made by Italian car manufacturer Alfa Romeo from 1954 until 1965 which included a 2+2 coupé, four-door saloon, estate, spider, Sprint, and Sprint Speciale. The 2+2 was Alfa Romeo's first successful foray into the 1.3-litre class. From 1954 to 1965 a total of 177,690 Giuliettas were made, the great majority in saloon (Berlina), Sprint coupé, or Spider body styles, but also as Sprint Speciale and Sprint Zagato coupés, and the rare Promiscua estate.
The Alfa Romeo Giulia TZ was a sports car and racing car manufactured by Alfa Romeo from 1963 to 1967. It replaced the Giulietta SZ. In 2011, the name was reduced from Giulia TZ to TZ in the new TZ3 model.
The Turin Motor Show was an auto show held annually in Turin, Italy. The first official show took place between 21 and 24 April 1900, at the Castle of Valentino, becoming a permanent fixture in Turin from 1938 having shared it with Milan and Rome until that time. From 1972, the show was held biannually and in 1984, it moved into Fiat's shuttered Lingotto factory.
Ilario Bandini was an Italian businessman, racing driver, and racing car manufacturer.
Giannini Automobili S.p.A. is an Italian tuning company and a former producer of cars. Their focus has mainly been on Fiat cars. It was founded in 1920 by brothers Attilio and Domenico Giannini. The company headquarters are in Rome, Italy.
The Lombardi Grand Prix is a small, rear-engined sports car on Fiat 850 underpinnings. It was developed by the Carrozzeria Francis Lombardi with an in-house design by Giuseppe Rinaldi. The car was built from 1968 until 1972 and was also marketed as the OTAS 820, as a Giannini, and as the Abarth Grand Prix and Scorpione. It was first shown in March 1968, at the Geneva Motor Show. The design had a Kammback rear and a very low nose with flip-up headlights, and a large single windshield wiper. The pop-up headlights were electrically powered. The bodywork was all steel, except the rear panel. The design was originally shown as a prototype based on the front-wheel drive Autobianchi A112, and was adapted by Lombardi for the 850 sedan's floorpan. At Turin 1969 a targa version was also shown; called the "Monza", this open model has a rollover bar. At least two were built but it is unknown whether any were sold.
The Carrozzeria Francis Lombardi was founded in 1947 in Vercelli, Italy, by noted pilot Carlo "Francis" Lombardi. They originally engaged in some aeronautical design, but this soon ended. Their most famous car was the Lombardi Grand Prix, which was also marketed under a variety of other names such as O.T.A.S. and Abarth. The company was closed in 1973.
The Fiat Pininfarina Cabriolet was a two-door, two passenger, front engine rear drive convertible manufactured by Pinin Farina, and marketed by Fiat across two generations, superseding the Fiat 1200 Spider.
The Abarth-Simca 1300 GT is a sports racing car built by Abarth from 1962 to 1965.
Abarth Simca GT refers to a number of sports cars produced by Italian manufacturer Abarth between 1962 and 1965.
The Fiat Abarth OTR 1000, alternatively also known as Fiat Abarth 1000 OTR, is a sporty subcompact model automobile produced by the Italian automobile manufacturer Abarth; with its special "Radiale" engine, it was built between 1964 and 1969 in various versions in very small numbers based on the Fiat 850.