| Cambrian Railways Class 89 GWR Class 15 | |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Cambrian Railways Jones class 855 in her final years of operation. | |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
The Cambrian Railways Class 89s were 0-6-0 tender locomotives introduced by Jones in 1903 for general use over their system, upon grouping they became Great Western Railway class 15 and were reboilered from 1924 onwards with Swindon parts.
The first batch of five locomotives were built by Robert Stephenson and Company (RS). Subsequent batches were built by Beyer, Peacock and Company (BP). The BP-built locomotives had cabs that extended over the full length of the footplate. [1]
| Cambrian nos. | GWR Nos. | Maker and order no. | Year built | Serial nos. |
|---|---|---|---|---|
| 15 | 844 | BP 0981 | 1918 | 5944 |
| 29 | 849 | BP 0981 | 1918 | 5945 |
| 31 | 855 | BP 0981 | 1919 | 5946 |
| 38 | 864 | BP 9683 | 1908 | 5031 |
| 42, 54 | 873-874 | BP 0981 | 1919 | 5947-48 |
| 89–91 | 887-889 | RS E3 | 1903 | 3089-91 |
| 92, 93 | 891-892 | RS E3 | 1903 | 3092-93 |
| 99–102 | 893-896 | BP 9683 | 1908 | 5029-30, 5032-33 |
Nos. 99–102 were numbered 15, 31, 42, 54 until October 1908. [2]
The first loco withdrawn by the GWR was 888 in May 1922. The first locos withdrawn by BR were 864 and 887 in November 1952 from Machynlleth and Oswestry sheds respectively. The last three locos in the class, 849 Machynlleth, 855, 895 Oswestry, were withdrawn in October 1954. None are preserved.
A 7mm scale (O gauge) model is produced by Javelin Models.
The British Railways Class 24 diesel locomotives, also known as the Sulzer Type 2, were built from 1958 to 1961. One hundred and fifty-one were built at Derby, Crewe and Darlington, the first twenty of them as part of the British Railways 1955 Modernisation Plan. This class was used as the basis for the development of the class 25 locomotives.
The Cambrian Railways owned 230 miles (370 km) of track over a large area of mid Wales. The system was an amalgamation of a number of railways that were incorporated in 1864, 1865 and 1904. The Cambrian connected with two of the larger railways to give connections to the northwest of England via the London and North Western Railway, and with the Great Western Railway for connections between London and Wales. The Cambrian Railways amalgamated with the Great Western Railway on 1 January 1922 as a result of the Railways Act 1921. The name is continued today in the route known as the Cambrian Line.
The Great Western Railway 3200 Class was a design of 4-4-0 steam locomotive for passenger train work. The nickname for this class, almost universally used at the time these engines were in service was Dukedog since the locomotives were composed of former Duke Class boilers on Bulldog Class frames. As such they were one of the last steam locomotive classes to retain outside frames.
The Great Western Railway (GWR) 7800 Class or Manor Class is a class of 4-6-0 steam locomotive. They were designed as a lighter version of the GWR Grange Class, giving them a wider Route Availability. Like the 'Granges', the 'Manors' used parts from the GWR 4300 Class Moguls but just on the first batch of twenty. Twenty were built between 1938 and 1939, with British Railways adding a further 10 in 1950. They were named after Manors in the area covered by the Great Western Railway. Nine are preserved.
The GWR 5600 Class is a class of 0-6-2T steam locomotive built between 1924 and 1928. They were designed by C.B Collett for the Great Western Railway (GWR), and were introduced into traffic in 1924. After the 1923 grouping, Swindon inherited a large and variable collection of locomotives from historic Welsh railway companies, which did not fit into their standardisation programme. GWR boiler inspectors arrived en masse and either condemned the original locomotives or had them rebuilt. The systematic destruction of many examples of locomotives, most still in serviceable condition, followed, but various were worked alongside 5600 Class.
The Great Western Railway (GWR) 4500 Class or Small Prairie is a class of 2-6-2T steam locomotives.
The Great Western Railway steam locomotive no. 7822 Foxcote Manor is a 4-6-0 Manor Class locomotive, built in 1950 at Swindon Works. It is part of a post-war batch of 10 locomotives, which follows on from 20 earlier locomotives built in 1938.
The Burry Port and Gwendraeth Valley Railway (BP&GV) numbers 4 Kidwelly and 5 Cwm Mawr were small 0-6-0ST steam locomotives, originally built by the Avonside Engine Company in May 1903 and April 1905 respectively.
The Great Western Railway (GWR) 3000 Class was a class of 2-8-0 steam locomotive consisting of the ex-Railway Operating Division ROD 2-8-0.
The Railway Operating Division (ROD) ROD 2-8-0 is a type of 2-8-0 steam locomotive which was the standard heavy freight locomotive operated in Europe by the ROD during the First World War.
Sir Haydn is a narrow gauge steam locomotive, built by Hughes's Locomotive & Tramway Engine Works of the Falcon Works, Loughborough in 1878. It operated on the Corris Railway in Wales, until closure in 1948, and since 1951 has operated on the nearby Talyllyn Railway. It has carried the operating number 3 under four successive owners.
Edward Thomas is a narrow gauge steam locomotive. Built by Kerr Stuart & Co. Ltd. at the California Works, Stoke-on-Trent in 1921, it was delivered new to the Corris Railway where it ran until 1948. After that railway closed, the locomotive was brought to the Talyllyn Railway in 1951, then restored, and remains in working order at the heritage railway. It has carried the operating number 4 under four successive owners.
GWR absorbed locos 1922 on gives details of Great Western Railway absorbed locomotives which do not yet have individual pages.
The Newtown and Machynlleth Railway was a railway company in Wales. It built a line from a junction with the Llanidloes and Newtown Railway near Caersws to the market town of Machynlleth; the line opened in 1862. Newtown had become the hub of railway lines in the district. Machynlleth was an important town, and extension from there to Aberystwyth and to the coast northward was in the minds of the promoters.
Barry Railway Class G were 0-4-4T steam tank locomotives of the Barry Railway in South Wales. They were designed by J. F. Hosgood, built by both Vulcan Foundry and Sharp Stewart and were introduced in 1892. Initially used for the Barry to Cardiff suburban service, they were transferred to passenger duties on the main line between Barry and Porth as well as the service between Pontypridd Graig and Cardiff Clarence Road, once the ‘J’ class had displaced them on the Barry to Cardiff run. The company insisted that their passenger locomotives should be smartly turned out and the ‘G’ class was no exception. The locomotives passed to the Great Western Railway in 1922. None survived into British Railways ownership and none have been preserved.
Barry Railway Class D were 0-8-0 steam tender engines of the Barry Railway in South Wales. They were built to a standard Sharp, Stewart and Company design modified by John Waddington Mann, the Chief Mechanical Engineer for the Swedish & Norwegian Railway. In fact, 20 of these locomotives were ordered by this railway. However the company ran into severe financial difficulty with the result that only one and a half locomotives were paid for by the S&N.
Barry Railway Class F were 0-6-0ST steam saddle tank engines of the Barry Railway in South Wales. They were designed by J. H. Hosgood and built by a number of British companies.
Barry Railway Class C were originally 2-4-0T steam tank engines of the Barry Railway in South Wales. They were designed by J. H. Hosgood and built by Sharp Stewart.
Barry Railway Class A were the first steam tank engines to be built for the Barry Railway in South Wales and had an 0-6-0T wheel arrangement. They were designed by John Wolfe Barry and built by Sharp Stewart.
The GWR Rheidol Tanks are a fleet of 2-6-2T steam locomotives of the Great Western Railway design built between 1923 and 1924. They were designed by the railway's Chief Mechanical Engineer, Charles Collett, for working services on the Vale of Rheidol Railway between Aberystwyth and Devil's Bridge.