Taff Vale Railway A class

Last updated

Taff Vale Railway A class
Abercynon (Taff Vale) station geograph-2559836-by-Ben-Brooksbank.jpg
Class 'A' No. 397 at Abercynon 1946 (rebuilt with GWR boiler)
Type and origin
Power typeSteam
Designer John Cameron
Builder Hawthorn Leslie & Co. (27);
Nasmyth, Wilson & Co. (12);
North British Locomotive Co. (6);
Vulcan Foundry (13)
Build date1914–1921, rebuilt 1924
Total produced58
Specifications
Configuration:
​
 •  Whyte 0-6-2T
Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.5 ft 3 in (1.600 m)
Loco weight65.70 long tons (66.75 t; 73.58 short tons)
Fuel type Coal
Boiler pressureAs built: 175 psi (1.21 MPa)
Rebuilt: 200 psi (1.38 MPa)
Cylinders Two, inside
Cylinder size As built: 18 in × 26 in (457 mm × 660 mm)
Rebuilt: 17.5 in × 26 in (444 mm × 660 mm)
Performance figures
Tractive effort As built: 21,000 lbf (93.4 kN)
Rebuilt: 21,480 lbf (95.5 kN)
Career
Power classBR: 4P
Retired1952–1957
DispositionAll scrapped

The Taff Vale Railway A class was a class of 0-6-2T steam tank locomotives designed by J. Cameron for mixed traffic work and introduced to the Taff Vale Railway (TVR) in 1914. The A class was an enlarged version of the TVR O4 class designed by Tom Hurry Riches in 1907. The A class was the last new class of locomotive to be introduced on the TVR, which had introduced its first 0-6-2Ts in 1885 (the M class); and, with a total of 58 built, was numerically the largest class of tank locomotive on the TVR. [1]

Contents

Previous classes of mixed-traffic 0-6-2T on the TVR (the M, M1, N, O, O1, O2, O3 and O4 classes) had used driving wheels of 4 ft 6 in (1.37 m) or 4 ft 6+1⁄2 in (1.384 m) diameter; but the A class used the same diameter as the TVR's passenger 0-6-2T (U and U1 classes), i.e. 5 ft 3 in (1.60 m), and they were used mainly on passenger trains. [2]

The first 51 locomotives initially had boilers working at a pressure of 160 pounds per square inch (1,100 kPa), which (except for no. 120) was later altered to 175 psi (1,210 kPa); the last seven worked at the higher pressure from new. By the time that the TVR amalgamated with the Great Western Railway (GWR) at the start of 1922, only four (TVR nos. 3, 42, 52 and 120) still worked at the original pressure. All of the A class locomotives were rebuilt with taper boilers and superheaters by the GWR between 1924 and 1932; these also worked at 175 psi (1,210 kPa) at first. The pressure was raised to 200 psi (1,380 kPa) between 1930 and 1939; at the same time, the cylinder bore was reduced from 18+1⁄2 inches (470 mm) to 17+1⁄2 in (440 mm). [3] All 58 passed to British Railways (BR) in 1948, until the introduction of the BR 82xxx 2-6-2Ts in the mid-1950s, these engines were widely used on passenger workings in the South Wales Valleys.

After withdrawal, several were employed as Works Pilots in Swindon before being broken up. [4] [5] The first loco withdrawn was 344 in November 1952 from Cardiff Cathays shed. The last seven locos 370, 373, 381, 383, 390, 398 and 402 were withdrawn together in August 1957 from Abercynon shed. None are preserved.

Builders and numbering

The locomotives were built in several batches by Hawthorn Leslie, Nasmyth, Wilson and Company, Vulcan Foundry and North British Locomotive Company. Their initial GWR numbers were in the ranges 335–408 (for locos working at a boiler pressure of 175 psi (1,210 kPa)) and 438–441 (pressure 160 psi (1,100 kPa)), but they were not consecutive and were intermingled with other classes. Those with numbers above 399 were renumbered between 303 and 322 during 1947–50. [6]

List of TVR A class locomotive orders
YearQuantityManufacturerSerial NumbersTVR NumbersGWR NumbersNotes
19146 Hawthorn Leslie 3057–30623, 7, 10, 11, 12, 120438, 335, 337, 343, 344, 441441 renumbered 322 in 1947, 438 renumbered 309 in 1949 [5]
19156 North British Locomotive Co. 21156–2116142, 45, 52, 122, 123, 124439, 346, 440, 352, 356, 357439 and 440 renumbered 312 and 316 in 1949 and 1950 respectively [5]
19166 Vulcan Foundry 3178–3183125, 127, 128, 129, 130, 132360, 361, 362, 364, 365, 366
191912 Nasmyth, Wilson & Co. 1269–1280133, 135, 136, 138, 139, 140, 154, 156, 157, 158, 159, 160367, 370, 371, 372, 373, 374, 377, 378, 379, 380, 381, 382
192016 Hawthorn Leslie 3394–340920, 134, 144, 149, 162, 164, 165, 400 to 408345, 368, 375, 376, 383 to 391, 393, 394, 397
19215 Hawthorn Leslie 3410–3414409 to 413398, 399, 401 to 403401 and 403 renumbered 303 and 305 in 1947, 402 renumbered 304 in 1948 [5]
19147 Vulcan Foundry 3492–349875, 80, 90, 91, 414 to 416347 to 349, 351, 404, 406, 408404, 406, and 408 renumbered 306 to 308 in 1949, 1949 and 1948 respectively [5]

Originally, the Taff Vale Railway commissioned the German locomotive factory Hannoversche Maschinenbau AG to build six locomotives in 1914. [7] However, due to the outbreak of the First World War, the deal did not come into being. [8] The order for these six locomotives was transferred to North British and they were delivered as nos. 42 etc. during 1915. [9]

See also

Related Research Articles

Taff Vale Railway Railway company and line in South Wales

The Taff Vale Railway (TVR) was a standard gauge railway in South Wales, built by the Taff Vale Railway Company to serve the iron and coal industries around Merthyr Tydfil and to connect them with docks in Cardiff. It was opened in stages in 1840 and 1841.

GWR 5600 Class

The GWR 5600 Class is a class of 0-6-2T steam locomotive built between 1924 and 1928. They were designed by C.B Collett for the Great Western Railway (GWR), and were introduced into traffic in 1924. After the 1923 grouping, Swindon inherited a large and variable collection of locomotives from historic Welsh railway companies, which did not fit into their standardisation programme. GWR boiler inspectors arrived en masse and either condemned the original locomotives or had them rebuilt. The systematic destruction of many examples of locomotives, most still in serviceable condition, followed, but various were worked alongside 5600 Class.

GWR 4500 Class

The Great Western Railway (GWR) 4500 Class or Small Prairie is a class of 2-6-2T steam locomotives.

GWR 3000 Class

The Great Western Railway (GWR) 3000 Class was a class of 2-8-0 steam locomotive consisting of the ex-Railway Operating Division ROD 2-8-0. These were built by North British Locomotive Co. between 1917-1918. No examples have been preserved.

The Taff Vale Railway U and U1 classes were 0-6-2T steam tank locomotive operated by Taff Vale Railway, Wales, from 1895. All were still in use when the Taff Vale Railway was acquired by the Great Western Railway in 1922, but were withdrawn from traffic between 1927 and 1931.

Rhymney Railway M class

The Rhymney Railway M class was a class of 0-6-2T tank locomotive introduced into traffic on the Rhymney Railway in 1904. These were substantial sized tank engines, and weighed 66 long tons and were 36 feet 9 inches (11.20 m) in length.

The Rhymney R class was a class of 0-6-2T steam locomotive introduced into traffic in 1907 designed by the railway's engineer Hurry Riches. These were substantial sized tank locomotives, and weighed 67 long tons and were 37 feet (11.28 m) in length.

Rhymney Railway A class

The Rhymney Railway A class were 0-6-2T tank locomotives introduced into traffic in 1910 and designed by the railway's engineer Hurry Riches. These were substantial sized tank engines, and weighed 64 long tons and were 35 ft 9 in (10.90 m) in length.

The Rhymney Railway P class was a class of 0-6-2T steam locomotive introduced into traffic in 1909 designed by the Rhymney Railway's engineer C. T. Hurry Riches. These were substantial sized tank locomotives, weighed 60 long tons and were 35 feet 0 inches (10.67 m) in length.

Welsh 0-6-2T locomotives

Welsh 0-6-2T locomotives were a standard steam locomotive of the railways of South Wales. Many of the independent railways used them and, at the grouping of 1923, the survivors passed into Great Western Railway (GWR) stock. The GWR perpetuated the type in the GWR 5600 Class. The other major railway company in Wales, the LNWR, also had the LNWR Webb Coal Tank Class, though this was grouped into the LMS not the GWR.

Taff Vale Railway O4 class

The Taff Vale Railway O4 class was a class of 0-6-2T steam tank locomotives designed by Tom Hurry Riches and introduced to the Taff Vale Railway in 1907. They were rebuilt with taper boilers and superheaters by the Great Western Railway (GWR) from 1924.

The Barry Railway class H was a small class of seven 0-8-2T tank locomotives built for the Barry Railway by Sharp Stewart in 1896. When they were introduced they were the first locomotives in Britain to use the 0-8-2 wheel arrangement.

Cambrian Railways Jones Class 89 0-6-0

The Cambrian Railways Class 89s were 0-6-0 tender locomotives introduced by Jones in 1903 for general use over their system, upon grouping they became Great Western Railway class 15 and were reboilered from 1924 onwards with Swindon parts.

Great Western Railway absorbed locomotives gives details of Great Western Railway absorbed locomotives which do not yet have individual pages.

Ely Valley Railway Railway in south Wales, United Kingdom

The Ely Valley Railway (EVR) was a broad gauge railway company in South Wales, which opened a mineral line between Llantrisant station on the South Wales Railway main line and pits at Mwyndy and Penrhiwfer in 1860.

Taff Vale Railway O2 class

The Taff Vale Railway O2 class was a class of 0-6-2T steam tank locomotives designed by Tom Hurry Riches and introduced to the Taff Vale Railway in 1899.

Taff Vale Railway O1 class

The Taff Vale Railway O1 class was a class of 0-6-2T steam tank locomotives designed by Tom Hurry Riches and introduced to the Taff Vale Railway in 1894.

Barry Railway Class C were originally 2-4-0T steam locomotives of the Barry Railway in South Wales. They were designed by J. H. Hosgood and built by Sharp Stewart.

The Taff Vale Railway H class was a class of 3 0-6-0T steam tank locomotives designed by Tom Hurry Riches, built by Kitson & Co. and introduced to the Taff Vale Railway in 1884. They were primarily used on the Pwllyrhebog Colliery Incline, and had special tapered boilers for this purpose.

GWR Rheidol Tanks

The GWR Rheidol Tanks are a fleet of 2-6-2T steam locomotives of the Great Western Railway design built between 1923 and 1924. They were designed by the railway's Chief Mechanical Engineer, Charles Collett, for working services on the Vale of Rheidol Railway between Aberystwyth and Devil's Bridge.

References

  1. ↑ Davies, F.K.; Firth, J.M.; Lucking, J.H.; Thomas, R.E.; Allcock, N.J.; Sterndale, A.C.; Barrie, D.S.M.; Reed, P.J.T.; Mountford, E.R. (April 1966). White, D.E. (ed.). The Locomotives of the Great Western Railway, part ten: Absorbed Engines, 1922-1947. RCTS. pp. K172, K187. ISBN   0-901115-20-7.
  2. ↑ Davies et al. 1966, pp. K172, K177, K179, K181, K183, K185, K187, K189.
  3. ↑ Davies et al. 1966, pp. K188, K189, K190–1.
  4. ↑ "Taff Vale | TVR 28 1964-09-27 Swindon".
  5. 1 2 3 4 5 Davies et al. 1966, p. K189.
  6. ↑ Davies et al. 1966, pp. K188, K189.
  7. ↑ "Taff Vale Ry". Locomotive Magazine and Railway Carriage and Wagon Review. Locomotive Publishing Company. 1914. p. 186.
  8. ↑ Tradition, Zeitschrift für Firmengeschichte und Unternehmerbiographie, 2. Jahrg., Erinnerungen aus der Geschichte der Hanomag von Erich Metzeltin, Verlag C.H.Beck, August 1957, p. 280.
  9. ↑ Davies et al. 1966, p. K188.

Sources


This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.