GWR 1600 Class

Last updated

GWR 1600 class
Severn Bridge station geograph-2565649-by-Ben-Brooksbank.jpg
1616 at Severn Bridge station in 1951
Type and origin
Power typeSteam
Designer Frederick Hawksworth
Builder Swindon Works
Order numberLots 381, 389, 417
Build date1949–1955
Total produced70
Specifications
Configuration:
   Whyte 0-6-0PT
   UIC C nt
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Driver dia.4 ft 1+12 in (1.257 m)
Minimum curve 4 chains (264 ft; 80 m) normal,
3.5 chains (231 ft; 70 m) slow
Wheelbase 14 ft 8 in (4.47 m)
Length30 ft 2+12 in (9.21 m) over buffers
Width8 ft 7 in (2.616 m)
Height11 ft 5+58 in (3.496 m)
Axle load 13 long tons 18 cwt (31,100 lb or 14.1 t)
(14.1 t; 15.6 short tons) full
Loco weight41 long tons 12 cwt (93,200 lb or 42.3 t)
(42.3 t; 46.6 short tons) full
Fuel type Coal
Water cap.875 imp gal (3,980 L; 1,051 US gal)
Firebox:
  Firegrate area
14.9 sq ft (1.38 m2)
BoilerGWR Standard No. 16 [1]
Boiler pressure165 lbf/in2 (1.14 MPa)
Heating surface:
  Tubes
877.2 sq ft (81.49 m2)
  Firebox79.5 sq ft (7.39 m2)
SuperheaterNone
Cylinders Two, inside
Cylinder size 16.5 in × 24 in (419 mm × 610 mm)
Valve gear Stephenson
Valve type Slide valves
Performance figures
Tractive effort 18,515 lbf (82.36 kN)
Career
Operators British Railways, National Coal Board
Power classGWR: A
BR: 2F
Numbers1600–1669
Axle load classGWR: unclassed
Withdrawn1959–1966
DispositionOne preserved, remainder scrapped

The Great Western Railway (GWR) 1600 Class is a class of 0-6-0 pannier tank steam locomotive designed for light branch lines, short-distance freight transfers and shunting duties.

Contents

History

The class was based on the 2021 class designed by Dean and built from 1897 onwards. The 2021 class was in its turn an enlargement of the 850 class designed by Armstrong in 1874.

Construction and operations

The 1600 Class was a pure GWR design but all 70 were built by the Western Region of British Railways. When the last member of the class was built in 1955, the basic design was over 80 years old; No. 1669 was the last one built, and in turn was the last GWR-design locomotive constructed at Swindon Works. BR gave the 1600 class the power classification 2F. Two locomotives (1646 and 1649) were transferred to the Scottish Region in 1957 and 1958 to operate the Dornoch Light Railway. [2] The class's service life was short; withdrawals started in 1959 and all were gone by 1966, with 1659 having the shortest service (built 1955, withdrawn 1960). Two were sold for further use to the National Coal Board: 1600 in 1959 (scrapped 1963), and 1607 in 1965 (scrapped 1970). The last three in BR service were Nos. 1628, 1638 and 1660, all withdrawn from Croes Newydd shed. [3]

Table of orders and numbers [4]
YearQuantityLot No.Locomotive numbersNotes
1949–50303811600–1629
1951203891630–1649
1954–55204171650–1669

Preservation

GWR 1600 No. 1638 at Llangollen Station on the Llangollen Railway GWR Class 1076 Pannier No 1638 (13643903223).jpg
GWR 1600 No. 1638 at Llangollen Station on the Llangollen Railway

No. 1638 was the only member of the class to have been preserved. It was purchased in 1966 from BR for the Dart Valley Railway. In 1992 it was sold to its present home on the Kent and East Sussex Railway, and is currently operational after its latest overhaul was completed in 2016.

See also

Related Research Articles

<span class="mw-page-title-main">GWR 3200 Class</span>

The Great Western Railway 3200 Class was a design of 4-4-0 steam locomotive for passenger train work. The nickname for this class, almost universally used at the time these engines were in service was Dukedog since the locomotives were composed of former Duke Class boilers on Bulldog Class frames. As such they were one of the last standard gauge steam locomotive classes to retain outside frames.

<span class="mw-page-title-main">GWR 5700 Class</span> Class of 0-6-0 pannier tank steam locomotives

The GWR 5700 Class is a class of 0-6-0 pannier tank steam locomotive built by the Great Western Railway (GWR) and British Railways (BR) between 1929 and 1950. With 863 built, they were the most prolific class of the GWR, and one of the most numerous classes of British steam locomotive.

<span class="mw-page-title-main">GWR 2251 Class</span>

The Great Western Railway (GWR) 2251 Class or Collett Goods Class was a class of 0-6-0 steam tender locomotives designed for medium-powered freight. They were introduced in 1930 as a replacement for the earlier Dean Goods 0-6-0s and were built up to 1948.

<span class="mw-page-title-main">GWR 1400 Class</span> British 0-4-2T steam locomotive class

The GWR 1400 Class is a class of steam locomotive designed by the Great Western Railway for branch line passenger work. It was originally classified as the 4800 Class when introduced in 1932, and renumbered in 1946.

<span class="mw-page-title-main">GWR 1500 Class</span> Great Western Railway steam locomotive

The Great Western Railway (GWR) 1500 Class is a class of 0-6-0 pannier tank steam locomotive. Despite being a GWR Hawksworth design, all ten were completed under the administration of the Western Region of British Railways in 1949, just after Nationalisation.

<span class="mw-page-title-main">GWR 9400 Class</span>

The Great Western Railway (GWR) 9400 Class is a class of 0-6-0 pannier tank steam locomotive, used for shunting and banking duties.

<span class="mw-page-title-main">GWR 1366 Class</span>

The Great Western Railway (GWR) 1366 Class is a class of 0-6-0 pannier tank steam locomotives built in 1934. They were a useful design and because of their light weight and short wheelbase and were often used on dockside branches or other lines with sharp curvatures.

<span class="mw-page-title-main">GWR 5600 Class</span>

The GWR 5600 Class is a class of 0-6-2T steam locomotive built between 1924 and 1928. They were designed by Charles Collett for the Great Western Railway (GWR), and were introduced into traffic in 1924. After the 1923 grouping, Swindon inherited a large and variable collection of locomotives from historic Welsh railway companies, which did not fit into their standardisation programme. GWR boiler inspectors arrived en masse and either condemned the original locomotives or had them rebuilt. The systematic destruction of many examples of locomotives, most still in serviceable condition, followed, but various were worked alongside 5600 Class.

<span class="mw-page-title-main">GWR 5400 Class</span>

The Great Western Railway (GWR) 5400 Class was a class of 0-6-0 pannier tank steam locomotive. They were similar in appearance to many other GWR tank engines but smaller than the ubiquitous GWR 5700 Class.

<span class="mw-page-title-main">GWR 6400 Class</span> Great Western Railway steam locomotive class

The Great Western Railway (GWR) 6400 Class is a class of 0-6-0 pannier tank steam locomotive introduced by Charles Collett in 1932. All 40 examples were 'auto-fitted' – equipped with the remote-control equipment needed for working autotrains.

<span class="mw-page-title-main">GWR 4500 Class</span>

The Great Western Railway (GWR) 4500 Class or Small Prairie is a class of 2-6-2T steam locomotives.

<span class="mw-page-title-main">GWR 2301 Class</span>

The Great Western Railway (GWR) 2301 Class or Dean Goods Class is a class of British 0-6-0 steam locomotives.

<span class="mw-page-title-main">GWR 5800 Class</span> A class of steam tank locomotives

The Great Western Railway (GWR) 5800 Class was a class of twenty 0-4-2T steam tank locomotives. They were built by the GWRs Swindon Works in 1933 and were used for light branch line work. They were similar to the GWR 1400 Class, but lacked the equipment for working autotrains. The last survivor of the class, number 5815, was with withdrawn in 1961. No members of the class were preserved.

The Great Western Railway (GWR) 3600 Class was a class of 2-4-2T side tank steam locomotive, designed by William Dean and built at Swindon in three lots in 1900-1903:

<span class="mw-page-title-main">GWR 1901 Class</span> Class of 120 small 0-6-0ST steam locomotives

The GWR 1901 Class was a class of 120 small 0-6-0ST steam locomotives. Numbered 1901–2020, they were designed by George Armstrong and built at the Wolverhampton railway works, England, of the Great Western Railway between 1881 and 1895. They had wheels of 4 ft 0 in (1.219 m) diameter and a coupled wheelbase of 13 ft 8 in (4.17 m).

<span class="mw-page-title-main">GWR 2021 Class</span>

The GWR 2021 Class was a class of 140 0-6-0ST steam locomotives. They were built at the Wolverhampton railway works of the Great Western Railway between 1897 and 1905. 1897 was the very year of George Armstrong's retirement, so it is uncertain if the design should be attributed to him or to his superior at Swindon, William Dean.

The GWR 2721 Class was a class of 0-6-0ST steam locomotives. They were designed by William Dean and built at the Swindon Works of the Great Western Railway between 1897 and 1901.

<span class="mw-page-title-main">GWR 850 Class</span>

The GWR Class 850 was an extensive class of small 0-6-0ST locomotives designed by George Armstrong and built at the Wolverhampton railway works of the Great Western Railway between 1874 and 1895. Aptly described as the GWR equivalent of the LB&SCR "Terrier" Class of William Stroudley, their wide availability and lively performance gave them long lives, and eventually they were replaced from 1949 by what were in essence very similar locomotives, the short-lived 1600 Class of Frederick Hawksworth, which in the headlong abandonment of steam outlived them by a mere seven years or so.

The GWR 1854 Class was a class of 0-6-0T steam locomotives designed by William Dean and constructed at the Swindon Works of the Great Western Railway. The class used similar inside frames and chassis dimensions to the 1813 Class of 1882-4. In this they differed from the intervening 1661 Class, which had reverted to the double frames of the Armstrong era. Thus the 1854 Class belongs to the "mainstream" of GWR 0-6-0T classes that leads towards the larger GWR pannier tanks of the 20th century.

The 4600 Class was a 4-4-2T steam locomotive built by the Great Western Railway in 1913. It was one of the GWR standard classes with two outside cylinders.

References

  1. Champ (2018), p. 319.
  2. "1600 0-6-0T BR Hawksworth 1600 – 1669". Preserved British Steam Locomotives. 14 June 2017. Retrieved 13 December 2021.
  3. Daniel, John. "'1600' tank class details: 1600 - 1669". The Great Western Archive. Retrieved 20 November 2020.
  4. Allcock et al. (1968), p. 41.