Joseph Armstrong (engineer)

Last updated

Joseph Armstrong
JosephArmstrong.jpg
Born(1816-09-21)21 September 1816
Died5 June 1877(1877-06-05) (aged 60)
NationalityEnglish
OccupationEngineer
Engineering career
DisciplineSteam locomotive engineer
Employer(s) Great Western Railway

Joseph Armstrong (born Bewcastle, Cumberland, 21 September 1816, died Matlock Bath 5 June 1877) was an English locomotive engineer and the second locomotive superintendent of the Great Western Railway. His younger brother George and one of his sons ("Young Joe") also became outstanding engineers in the employment of the GWR.

Contents

Career

Early years to 1847

After a spell in Canada, in 1824 Joseph's family took up residence in Newburn-on-Tyne, where his father Thomas became a bailiff to the Duke of Northumberland. Joseph attended Bruce's School in Newcastle, where Robert Stephenson had also been a pupil. In 1823 Robert Stephenson, in collaboration with his father George, had set up his locomotive works in the city. Moreover, Newburn was at one end of the Wylam Waggonway, where the sight of the famous locomotives Puffing Billy and Wylam Dilly must have inspired young Joseph's enthusiasm as an engineer. Newburn also had colliery railways worked by stationary engines, and it was at one of these, Walbottle Colliery, that Armstrong found his first employment. [1]

As well as their acquaintance with the Stephensons, an important contact for the Armstrongs was the Methodist philanthropist Timothy Hackworth, who in 1825 became first locomotive superintendent of the brand-new Stockton and Darlington Railway. [2] Through Hackworth, the teenage Armstrong may have gained experience driving locomotives on the Stockton and Darlington, and it has been suggested that Hackworth was probably a strong influence on his notably humane religious and social outlook when later in a position of great responsibility at Swindon Works on the Great Western. [3]

Meanwhile, continuing to gain hands-on experience with the pioneering steam locomotives of the time, at the age of 20 (1836) Armstrong was employed by Edward Woods as a driver on Stephenson's Liverpool and Manchester Railway, moving four years later to a similar post on the Hull and Selby Railway, where he was promoted to the post of foreman and became acquainted with the forward-looking locomotive designs of John Gray. [2] On following Gray to Brighton Works in 1845, Armstrong also got to know another pioneering locomotive engineer of the period, David Joy. [4]

Saltney and Wolverhampton, 1847–64

In 1847 Armstrong was appointed assistant locomotive superintendent to Edward Jeffreys, on the Shrewsbury and Chester Railway (S&CR), [5] whose repair works was at Saltney. [6] When Jeffreys left in April 1853, Armstrong was promoted to Locomotive Superintendent. [7] Also in 1853, the S&CR pooled its locomotives with the Shrewsbury and Birmingham Railway (S&BR), [8] and Armstrong became responsible for the combined fleet, moving to the ex-S&BR repair shops close to Wolverhampton (High Level) station, [9] where he appointed his younger brother, George as his assistant and works manager. [10]

On 1 September 1854, the S&CR and S&BR amalgamated with the Great Western Railway (GWR), [11] whose locomotive workshops were at Swindon. [12] The two smaller railways became the newly established Northern Division of the GWR. Armstrong remained in his position [13] (although he now reported to Daniel Gooch, who was based at Paddington [14] ), and a larger works was established at Wolverhampton to replace the former S&BR premises. [13]

The ex-S&CR and ex-S&BR locomotives were the first standard-gauge locomotives to be owned by the GWR. [8] All these had been supplied by independent locomotive manufacturers, but the GWR Board wished to have future standard-gauge locomotives built at Wolverhampton. Since Wolverhampton was not yet equipped for new construction, [15] Swindon began building standard-gauge locomotives in 1855, which were to the designs of Gooch; some of these were built by outside manufacturers. In 1859, Wolverhampton also began building locomotives, to the designs of Armstrong, [8] who had been given a certain degree of autonomy. [16]

Swindon, 1864–77

In 1864, Gooch resigned the post of Superintendent of Locomotive Engines, and Armstrong was promoted to replace him; in addition to Gooch's locomotive duties, Armstrong was also made responsible for carriages and wagons, which was reflected in his new job title, that of Locomotive, Carriage and Wagon Superintendent. [10] As with Gooch, his responsibilities encompassed the Northern Division, which he was happy to devolve to his younger brother, George. [17]

Arriving at Swindon, Armstrong embarked his onerous duties with a zeal that would eventually prove too much for even his sturdy health. A characteristic Victorian paterfamilias, he was diligent and strict, intolerant of corruption and injustice, yet philanthropic and generous to those who worked hard. [18] In addition to his railway duties he was much involved in the everyday life of New Swindon. He was a lay preacher for the Methodists, while also ensuring that the town had churches of all denominations. He was president of the Mechanics' Institute, founded by Gooch but much expanded under Armstrong, and from 1864 till his death was Chairman of the Swindon New Town Board. He was involved with the Medical Fund Society, the Sick Fund Society, the town Water Works, and the Cottage Hospital with its associated mutual benefit societies. [19]

The 1860s and 70s were a time of expansion for the Great Western Railway. After the Gauge Commission had decided in 1846 against the expansion of the broad gauge, most new routes were laid to standard gauge only. Armstrong's job included maintaining the large stock of broad gauge locomotives, many of which had to be renewed or replaced, and also (from 1868) designing a large number of new standard gauge locomotives for service on the rapidly increasing amount of standard and mixed gauge track. In a wider sense he was in charge of all the company's rolling stock, as well as the work and well-being of some 13,000 employees all over the GWR network. [20]

In 1877 Joseph started to show signs of heart trouble. He was reluctant to stop work, but eventually agreed to take a convalescent holiday in Scotland. This came too late, however, and he died of a heart attack at Matlock Bath while travelling north. His funeral on 7 June was one of the most memorable in Swindon's history: 2,000 workers came from the Works, and another 100 from Wolverhampton, as well as many from elsewhere on the GWR system. There were outsiders, too, such as William Stroudley from Brighton; in all some 6,000 people crowded into St Mark's churchyard, where an obelisk to the memory of Armstrong and two of his sons can still be seen just to the east of the church. [21] [22]

Children

Joseph married Sarah Burdon in 1848. They had nine children, four of whom were apprenticed at Swindon: [23]

In 1873 the GWR built a large family house for the Armstrongs, Newburn House, located south-east of Swindon Works and station. [30] Dean and Churchward both subsequently lived there, but the childless Colletts chose to live elsewhere, and Newburn House was demolished in 1937. The present-day Newburn Crescent is on the site.

Locomotives

The locomotives of the Armstrongs are relatively little known today, compared to the epoch-making work of Gooch and the turn-of-century elegance of Dean's best designs. Most Armstrong engines were withdrawn by the time of the Second World War, many long before, and none was preserved. One writer [16] has suggested that there is in fact not a huge amount to say about them, simply because they were so orthodox and consistently well-designed. At the same time, "...it is fair to say that he [Armstrong] left the Great Western better provided with sound engines for every class of traffic than any other railway in Britain, and probably in the world." [31]

All of Joseph's engines were six-wheelers:

See also

Notes

  1. Holcroft 1953, p. 27.
  2. 1 2 Holcroft 1953, p. 28.
  3. Holcroft 1953, pp. 72–73.
  4. Holcroft 1953, p. 29.
  5. Marshall 1978, p. 14.
  6. Reed 1956, p. C4.
  7. MacDermot 1927, p. 392.
  8. 1 2 3 Allcock et al. 1951, p. 5.
  9. Reed 1956, pp. C4, C10.
  10. 1 2 Gibson 1984, p. 27.
  11. MacDermot 1927, p. 390.
  12. MacDermot 1927, p. 151.
  13. 1 2 Reed 1956, p. C10.
  14. Holcroft 1971, p. 24.
  15. Holcroft 1971, p. 15.
  16. 1 2 Gibson 1984, p. 26.
  17. Gibson 1984, pp. 26–27.
  18. Holcroft 1953, p. 73.
  19. Holcroft 1953, pp. 71–74.
  20. Holcroft 1953, pp. 61–71.
  21. Peck 1983, p. 00.
  22. Holcroft 1953, pp. 75–76.
  23. The Armstrong Family, Armstrong family tree.
  24. Holcroft 1953, pp. 79–80.
  25. Holcroft 1953, pp. 97–103.
  26. Holcroft 1953, pp. 105–109.
  27. Holcroft 1953, pp. 81–83.
  28. Young Joe's Death.
  29. Holcroft 1953, pp. 80–81.
  30. Newburn House.
  31. Gibson 1984, p. 33.
  32. Nock 1962, pp. 94–5.
  33. Nock 1962, pp. 124–130.
  34. Gibson 1984, p. 31.
  35. Nock 1990, p. 24.

Related Research Articles

Great Western Railway British railway company (1833-1947)

The Great Western Railway (GWR) was a British railway company that linked London with the southwest and west of England, the West Midlands, and most of Wales. It was founded in 1833, received its enabling Act of Parliament on 31 August 1835 and ran its first trains in 1838. It was engineered by Isambard Kingdom Brunel, who chose a broad gauge of 7 ft —later slightly widened to 7 ft 14 in —but, from 1854, a series of amalgamations saw it also operate 4 ft 8+12 in standard-gauge trains; the last broad-gauge services were operated in 1892.

GWR 4000 Class

The Great Western Railway 4000 or Star were a class of 4-cylinder 4-6-0 passenger steam locomotives designed by George Jackson Churchward for the Great Western Railway (GWR) in 1906 and introduced from early 1907. The prototype was built as a 4-4-2 Atlantic. They proved to be a successful design which handled the heaviest long-distance express trains, reaching top speeds of 90 mph, and established the design principles for GWR 4-cylinder classes over the next twenty-five years.

GWR 111 <i>The Great Bear</i>

The Great Bear, number 111, was a locomotive of the Great Western Railway. It was the first 4-6-2 (Pacific) locomotive used on a Great Britain railway, and the only one of its type built by the GWR.

William Dean (engineer) English railway engineer

William Dean was an English railway engineer. He was the second son of Henry Dean, who was the manager of the Hawes Soap Factory in New Cross, London. William was educated at the Haberdashers' Company School. He became the Chief Locomotive Engineer for the Great Western Railway from 1877, when he succeeded Joseph Armstrong. He retired from the post in 1902 and was replaced by George Jackson Churchward. He designed famous steam locomotive classes such as the Duke Class, the Bulldog Class and the long-lived 2301 Class.

George Jackson Churchward was an English railway engineer, and was chief mechanical engineer of the Great Western Railway (GWR) in the United Kingdom from 1902 to 1922.

Locomotives of the Great Western Railway

The first Locomotives of the Great Western Railway (GWR) were specified by Isambard Kingdom Brunel but Daniel Gooch was soon appointed as the railway's Locomotive Superintendent. He designed several different 7 ft 14 in broad gauge types for the growing railway, such as the Firefly and later Iron Duke Class 2-2-2s. In 1864 Gooch was succeeded by Joseph Armstrong who brought his standard gauge experience to the workshops at Swindon. To replace some of the earlier locomotives, he put broad gauge wheels on his standard gauge locomotives and from this time on all locomotives were given numbers, including the broad gauge ones that had previously carried just names.

GWR 4100 Class

The GWR 4100 Class was a class of steam locomotives in the Great Western Railway (GWR) of the United Kingdom.

The Great Western Railway County Class were a class of 4-4-0 steam locomotives for express passenger train work introduced in 1904 in a batch of ten. Two more batches followed in 1906 and 1912 with minor differences. They were designed by George Jackson Churchward, who used standard components to produce a four-coupled version of his Saint Class 4-6-0s.

Wolverhampton railway works was in the city of Wolverhampton in the county of Staffordshire, England. It was almost due north of the city centre, and is commemorated with a small display of level crossing gates and a plaque. Known as the Stafford Road Works, it was opened by the Shrewsbury and Birmingham Railway in 1849 to maintain bought-in locomotives.

Swindon Works

Swindon railway works was opened by the Great Western Railway in 1843 in Swindon, Wiltshire, England. It served as the principal west England maintenance centre until closed in 1986.

Charles Collett

Charles Benjamin Collett was Chief Mechanical Engineer of the Great Western Railway from 1922 to 1941. He designed the GWR's 4-6-0 Castle and King Class express passenger locomotives.

GWR 3031 Class

The Dean Single, 3031 Class, or Achilles Class was a type of steam locomotive built by the British Great Western Railway between 1891 and 1899. They were designed by William Dean for passenger work. The first 30 members of the class were built as 2-2-2s of the 3001 Class.

George Armstrong was an English railway engineer. He was in charge of standard gauge steam locomotives for the Great Western Railway at Stafford Road Works, Wolverhampton, from 1864 to 1897. He was the younger brother of his colleague Joseph Armstrong, but thanks to the special requirements of the GWR at a time when it was split in two by the broad and standard gauges, the brothers were able to work largely independently of each other. George is best remembered for his 0-4-2 and 0-6-0 tank engines; these were long-lived, and even when life-expired they were replaced by Collett and Hawksworth with remarkably similar locomotives, the well-known 1400, 5700 and 1600 classes.

Harold Holcroft was an English railway and mechanical engineer who worked for the Great Western Railway (GWR), the South Eastern and Chatham Railway (SECR) and the Southern Railway (SR).

The GWR 378 Class was a class of 30 standard-gauge 2-2-2 steam locomotives on the Great Western Railway in Britain. They were introduced in 1866, and the class remained intact until 1898. Several were altered to the 0-6-0 wheel arrangement, and the last was withdrawn from service in 1920.

The Daniel Gooch standard gauge locomotives comprise several classes of locomotives designed by Daniel Gooch, Superintendent of Locomotive Engines for the Great Western Railway (GWR) from 1837 to 1864.

GWR Queen Class

The Queen Class was Joseph Armstrong's last class of 2-2-2 express engine for the Great Western Railway, larger than the Sir Daniel Class of about a decade earlier. They worked express trains for almost 30 years, and were in effect the predecessors of the larger Singles of William Dean.

The 927 Class or Coal Goods was series of 20 0-6-0 freight steam locomotives designed by Joseph Armstrong for the Great Western Railway, and built at Swindon Works in 1874. They were numbered in the series 927-946.

Between 1854 when the Shrewsbury and Chester and Shrewsbury and Birmingham Railways were absorbed by the Great Western Railway, and 1864 when he moved south to Swindon Works, Joseph Armstrong occupied the post of the GWR's Locomotive Superintendent, Northern Division, at Wolverhampton Works. For ten years the task of providing new locomotives for the GWR's newly acquired standard gauge lines fell jointly to Armstrong and to his superior Daniel Gooch, the railway's principal Locomotive Superintendent who was based at Paddington.

References

Business positions
Preceded by
Sir Daniel Gooch
Locomotive, Carriage and Wagon Superintendent
of the Great Western Railway

1864–1877
Succeeded by
William Dean