GWR Swindon Class

Last updated

Swindon
Type and origin
Power typeSteam
Designer Joseph Armstrong
Builder Great Western Railway
Specifications
Configuration:
   Whyte 0-6-0
Gauge 7 ft 14 in (2,140 mm)
Driver dia.5 ft 0 in (1.524 m)
Wheelbase 15 ft 6 in (4.724 m)
Cylinder size 17 in × 24 in (432 mm × 610 mm) dia × stroke
Career
Operators Great Western Railway
Class Swindon

The Great Western Railway Swindon Class were broad gauge 0-6-0 locomotives built for goods train work. This class entered service between November 1865 and March 1866, and were withdrawn between June 1887 and the end of the GWR broad gauge in May 1892. The entire class was sold to the Bristol and Exeter Railway between July 1872 and September 1874 and were numbered 96-109, but returned to the GWR when that railway was absorbed. The locomotives were then renumbered 2077-2090; their names were not restored.

Contents

Locomotives

Great Western Railway

Bath is a Georgian city 11+12 miles (18.5 km) east of Bristol which was reached by the Great Western Railway on 31 August 1840.
This locomotive was named after the Midlands city, Birmingham, which was served by broad gauge trains from 1 October 1851..
This locomotive was named after the western terminus of the railway, Bristol.
Chester never saw broad gauge trains but was served by the Great Western Railway from 1 September 1854 when it absorbed the Shrewsbury and Chester Railway.
Gloucester was reached over the Cheltenham and Great Western Union Railway from Swindon on 12 March 1845.
Hereford is an English city near the Welsh border, reached on 2 June 1855 by the Hereford, Ross and Gloucester Railway.
This locomotive was named after the city from where the railway started, London.
Newport is on the South Wales Railway which opened on 18 June 1850.
Oxford, home to many universities, was served by a branch line from Didcot Junction from 12 June 1844..
This locomotive was named after Reading, a large town 35+34 miles (57.5 km) from London.
Shrewsbury never saw broad gauge trains but was served by the Great Western Railway from 1 September 1854 when it absorbed the Shrewsbury and Birmingham Railway.
This locomotive was named after the town mid-way along the Great Western Railway, Swindon, where the company built its workshops.
Windsor is the seat of the Royal Family near London and was served by a branch line from Slough that opened on 8 October 1849.
Wolverhampton is in the Midlands and home to the Great Western's Northern Division workshops. It was served by broad gauge trains from 14 November 1854.

Bristol and Exeter Railway

Formerly Shrewsbury
Formerly Hereford
Formerly Chester
Formerly Windsor
Formerly London
Formerly Bristol
Formerly Gloucester
Formerly Birmingham
Formerly Wolverhampton
Formerly Bath
Formerly Newport
Formerly Reading
Formerly Oxford
Formerly Swindon

Related Research Articles

<span class="mw-page-title-main">Great Western Railway</span> British railway company (1833–1947)

The Great Western Railway (GWR) was a British railway company that linked London with the southwest, west and West Midlands of England and most of Wales. It was founded in 1833, received its enabling act of Parliament on 31 August 1835 and ran its first trains in 1838 with the initial route completed between London and Bristol in 1841. It was engineered by Isambard Kingdom Brunel, who chose a broad gauge of 7 ft —later slightly widened to 7 ft 14 in —but, from 1854, a series of amalgamations saw it also operate 4 ft 8+12 in standard-gauge trains; the last broad-gauge services were operated in 1892.

<span class="mw-page-title-main">GWR Sir Watkin Class</span>

The Great Western Railway Sir Watkin Class were 0-6-0T broad gauge steam locomotives. They were designed for working goods trains through to the underground Metropolitan Railway in London. This class was introduced into service between December 1865 and the last was withdrawn at the end of the GWR broad gauge in May 1892. They were all named after directors and senior officers of the railway.

<span class="mw-page-title-main">Welsh Marches line</span> Railway line

The Welsh Marches line, known historically as the North and West Route, is the railway line running from Newport in south-east Wales to Shrewsbury in the West Midlands region of England by way of Abergavenny, Hereford and Craven Arms and thence to Crewe via Whitchurch. The line thus links the south of Wales to north-west England via the Welsh Marches region, bypassing Birmingham. Through services from south-west Wales, Swansea and Cardiff to Manchester and from Cardiff to Wrexham, Chester, the north coast of Wales and Anglesey constitute the bulk of passenger operations on the route.

The Birmingham and Gloucester Railway (B&GR) was the first name of the railway linking the cities in its name and of the company which pioneered and developed it; the line opened in stages in 1840, using a terminus at Camp Hill in Birmingham. It linked with the Bristol and Gloucester Railway in Gloucester, but at first that company's line was broad gauge, and Gloucester was a point of the necessary but inconvenient transhipment of goods and passengers onto 4 ft 8+12 in gauge that became the national standard. Nearly all of the original main line remains active as a "trunk" route, also known as an arterial route or line.

<span class="mw-page-title-main">Gloucester railway station</span> Railway station in Gloucestershire, England

Gloucester, formerly known as Gloucester Central, is a railway station serving the city of Gloucester in England. It is located 114 miles 4 chains (183.5 km) west of London Paddington, via Stroud.

Wolverhampton railway works was in the city of Wolverhampton in the county of Staffordshire, England. It was almost due north of the city centre, and is commemorated with a small display of level crossing gates and a plaque. Known as the Stafford Road Works, it was opened by the Shrewsbury and Birmingham Railway in 1849 to maintain bought-in locomotives.

The Bristol and Gloucester Railway was a railway company opened in 1844 to run services between Bristol and Gloucester. It was built on the 7 ftBrunel gauge, but it was acquired in 1845 by the 4 ft 8+12 instandard gauge Midland Railway, which also acquired the Birmingham and Gloucester Railway at the same time.

<span class="mw-page-title-main">Joseph Armstrong (engineer)</span> English locomotive engineer

Joseph Armstrong was an English locomotive engineer and the second locomotive superintendent of the Great Western Railway. His younger brother George and one of his sons also became outstanding engineers in the employment of the GWR.

The Oxford, Worcester and Wolverhampton Railway (OW&WR) was a railway company in England. It built a line from Wolvercot Junction near Oxford to Worcester, Stourbridge, Dudley and Wolverhampton, as well as some branches.

<span class="mw-page-title-main">Bristol and Exeter Railway locomotives</span>

The Bristol and Exeter Railway locomotives worked trains on the Bristol and Exeter Railway from 1 May 1849 until the railway was amalgamated with the Great Western Railway on 1 January 1876.

<span class="mw-page-title-main">Bristol and Exeter Railway 4-2-2 locomotives</span>

The 20 Bristol and Exeter Railway 4-2-2 locomotives were broad gauge 4-2-2 express steam locomotives built for the Bristol and Exeter Railway by the Stothert and Slaughter in Bristol. The first entered service in 1849. The Bristol and Exeter Railway was amalgamated into the Great Western Railway on 1 January 1876 and eight 4-2-2s survived at this time, the last being withdrawn in 1889.

The Pontypool, Caerleon and Newport Railway was promoted independently to relieve congestion on the heavily worked Eastern Valley Line of the Monmouthshire Railway and Canal Company. The Great Western Railway put up half the capital, making it in effect a GWR subsidiary. It opened in 1874, and most long-distance passenger and goods traffic, especially the heavy mineral traffic, transferred to it. It amalgamated with the GWR in 1876.

Hereford has seen a history of expansion and decline in its railway history.

The Cheltenham and Great Western Union Railway was a railway company intended to link Cheltenham, Gloucester and Swindon, in England. It was authorised in 1836 but it found it very hard to raise money for the construction, and it opened only a part of its line, between Swindon and Cirencester, in 1841. It sold its business to the Great Western Railway, which quickly built the line through to Gloucester in 1845 and Cheltenham in 1847; part of that route was shared with other companies.

The Shrewsbury and Hereford Railway was an English railway company that built a standard gauge line between those places. It opened its main line in 1853.

The Daniel Gooch standard gauge locomotives comprise several classes of locomotives designed by Daniel Gooch, Superintendent of Locomotive Engines for the Great Western Railway (GWR) from 1837 to 1864.

Between 1854 when the Shrewsbury and Chester and Shrewsbury and Birmingham Railways were absorbed by the Great Western Railway, and 1864 when he moved south to Swindon Works, Joseph Armstrong occupied the post of the GWR's Locomotive Superintendent, Northern Division, at Wolverhampton Works. For ten years the task of providing new locomotives for the GWR's newly acquired standard gauge lines fell jointly to Armstrong and to his superior Daniel Gooch, the railway's principal Locomotive Superintendent who was based at Paddington.

References