GWR 101 Class

Last updated

GWR 101 Class
GWR 101 Class.jpg
101 after conversion to burn coal in 1905
Type and origin
Power typeSteam
Designer George Jackson Churchward
BuilderGWR Swindon Works
Order numberLot 136
Serial number1969
Build date1902
Total produced1 (prototype)
Rebuild date1905
Specifications
Configuration:
   Whyte 0-4-0T
Gauge 1,435 mm (4 ft 8+12 in)
Coupled dia.3 ft 8 in (1.118 m)
Wheelbase 9 ft (2.743 m)
Fuel typeOil (Original)
Coal (Rebuilt)
Cylinders Two, outside
Cylinder size 13 in × 22 in (330 mm × 559 mm)
Valve gear Joy valve gear
Career
Operators GWR
Numbers101
Withdrawn1911
DispositionScrapped

The GWR 101 Class consisted of a single experimental 0-4-0T side-tank steam locomotive. It was built at GWR Swindon Works under the direction of George Jackson Churchward in June 1902. [1] [2]

Contents

Originally built as an oil-burning locomotive 'on Holden's system' [2] [lower-alpha 1] , it had an unusual boiler containing a firebox constructed as an arched chamber made from fire-bricks, opening to the firetubes in front, and with two oil-burning nozzles at the back. Over this was mounted a short saddle tank for the oil fuel. There was no outer firebox, but the 8 ft × 5 ft (2.438 m × 1.524 m) boiler, pressed to 180 psi (1.2 MPa), contained 289 firetubes in the lower part and a large steam space above.

As soon as July 1902, it was redesigned with a smaller firebox and a single burner. It was given a Lentz boiler with a cylindrical corrugated firebox inside the barrel in 1903. The saddle tank for fuel was removed and oil stored at the rear end of the side tanks. In 1905, the locomotive was rebuilt as a coal burner, with the cab backplate replaced by a bunker.

It was intended for light passenger service on the Wrington Vale Light Railway near Bristol. However, due to technical issues associated with the design, the locomotive never saw the intended service. It remained at Swindon Works, used as a works shunter. No further engines were built to this design, and the locomotive was withdrawn and scrapped in 1911. [1] [2]

Despite it being a unique, obscure and short-lived experimental loco, Hornby have been producing a 00 scale model of No. 101 since 1978, in many prototypical and non-prototypical guises. It is currently sold as part of the Railroad range. [4] Hornby have sometimes inaccurately ascribed the whole design to Holden, instead of just the oil-burning mechanism. [5]

See also

Notes

  1. James Holden left the GWR in 1885 for the GER, where he developed oil burning technology for steam locomotives, being granted a patent for it [3] in 1899.
  1. 1 2 Haresnape 1976.
  2. 1 2 3 Tabor 1959, pp. F45–F46.
  3. "Espacenet – search results". worldwide.espacenet.com. Retrieved 18 August 2021.
  4. HornbyGuide 2016.
  5. Hornby 1978.

Related Research Articles

GWR 111 <i>The Great Bear</i> Steam locomotive in Great Britain

The Great Bear, number 111, was a locomotive of the Great Western Railway. It was the first 4-6-2 (Pacific) locomotive used on a railway in Great Britain, and the only one of its type built by the GWR.

<span class="mw-page-title-main">George Jackson Churchward</span> English railway engineer

George Jackson Churchward was an English railway engineer, and was chief mechanical engineer of the Great Western Railway (GWR) in the United Kingdom from 1902 to 1922.

The Great Western Railway 3800 Class, also known as the County Class, were a class of 4-4-0 steam locomotives for express passenger train work introduced in 1904 in a batch of ten. Two more batches followed in 1906 and 1912 with minor differences. They were designed by George Jackson Churchward, who used standard components to produce a four-coupled version of his Saint Class 4-6-0s.

<span class="mw-page-title-main">GWR 4200 Class</span> Class of 2-8-0T steam locomotives

The Great Western Railway (GWR) 4200 Class is a class of 2-8-0T steam locomotives.

<span class="mw-page-title-main">GWR 6959 Class</span> Development of the GWR Hall Class

The Great Western Railway (GWR) 6959 or Modified Hall Class is a class of 4-6-0 steam locomotive. They were a development by Frederick Hawksworth of Charles Collett's earlier Hall Class named after English and Welsh country houses.

<span class="mw-page-title-main">GWR 2800 Class</span>

The Great Western Railway (GWR) 2800 Class is a class of Churchward-designed 2-8-0 steam locomotive.

<span class="mw-page-title-main">GWR 5600 Class</span> Steam locomotive

The GWR 5600 Class is a class of 0-6-2T steam locomotive built between 1924 and 1928. They were designed by Charles Collett for the Great Western Railway (GWR), and were introduced into traffic in 1924. After the 1923 grouping, Swindon inherited a large and variable collection of locomotives from historic Welsh railway companies, which did not fit into their standardisation programme. GWR boiler inspectors arrived en masse and either condemned the original locomotives or had them rebuilt. The systematic destruction of many examples of locomotives, most still in serviceable condition, followed, but various were worked alongside 5600 Class.

<span class="mw-page-title-main">GWR 2221 Class</span>

The Great Western Railway (GWR) 2221 Class or County Tank was a class of 4-4-2T steam locomotive, effectively a tank engine version of the 3800 "County" Class 4-4-0 tender locomotives. The two classes had different boilers, standard no 4 for the tender locomotive, and the smaller standard no 2 for the tank. 2230 was fitted with the larger boiler when new, but this was unsuccessful and was quickly altered.

<span class="mw-page-title-main">GWR 2301 Class</span>

The Great Western Railway (GWR) 2301 Class or Dean Goods Class is a class of British 0-6-0 steam locomotives.

<span class="mw-page-title-main">Charles Collett</span> British railway engineer

Charles Benjamin Collett was Chief Mechanical Engineer of the Great Western Railway from 1922 to 1941. He designed the GWR's 4-6-0 Castle and King Class express passenger locomotives.

The Great Western Railway (GWR) 3600 Class was a class of 2-4-2T side tank steam locomotive, designed by William Dean and built at Swindon in three lots in 1900-1903:

The GWR 0-6-0PT, is a type of steam locomotive built by the British Great Western Railway with the water tanks carried on both sides of the boiler, in the manner of panniers. They were used for local, suburban and branch line passenger and goods traffic, for shunting duties, and as banker engines on inclines. The early examples, such as the 1901 and 2021 classes, were rebuilt from saddle or side tanks when the locos received a Belpaire firebox – this type of firebox has a square top and is incompatible with a curved saddle tank. This process mostly took place during the tenure at Swindon Works of George Jackson Churchward. Only a very small number of saddle tank locomotives escaped rebuilding as panniers, notably the 1361 Class built new under Churchward in 1910, by which date a few of the 1813 Class had already been rebuilt as pannier tanks.

The GWR was the longest-lived of the pre-nationalisation railway companies in Britain, surviving the 'Grouping' of the railways in 1923 almost unchanged. As a result, the history of its numbering and classification of locomotives is relatively complicated. This page explains the principal systems that were used.

<span class="mw-page-title-main">James Holden (locomotive engineer)</span>

James Holden was an English locomotive engineer.

<span class="mw-page-title-main">GWR 2721 Class</span> Class of British 0-6-0ST locomotives

The GWR 2721 Class was a class of 0-6-0ST steam locomotives. They were designed by William Dean and built at the Swindon Works of the Great Western Railway between 1897 and 1901.

GWR 102 <i>La France</i>

La France, number 102, was a locomotive of the Great Western Railway. It was bought by G.J. Churchward to evaluate French locomotive practice, and particularly the effect of compounding.

<span class="mw-page-title-main">GWR No. 36</span>

GWR No. 36 was a prototype 4-6-0 steam locomotive constructed at Swindon Works for the Great Western Railway in 1896, the first 4-6-0 ever built for the GWR and one of the first in Britain. It was designed by William Dean and le Fleming comments that "the design is unusual and entirely Dean of the later period, including the only large boiler ever built entirely to his ideas."

<span class="mw-page-title-main">GWR 3901 Class</span> Class of 20 two-cylinder 2-6-2T locomotives

The Great Western Railway (GWR) 3901 Class is a class of 2-6-2T steam locomotives rebuilt from class 2301 'Dean Goods' 0-6-0 tender locomotives.

The Great Western Railway (GWR) experimented with oil burning steam locomotives at two points in its history. A single experimental tank engine was constructed to burn oil in 1902, and 37 engines of four different classes were converted to burn oil between 1946 and 1950. Neither experiment resulted in the long-term use of oil as fuel for steam locomotives. A single pannier tank locomotive was also converted under British Rail in 1958.

References

Further reading