GWR 2600 Class

Last updated

GWR 2600 'Aberdare' Class
2-6-0 GWR Aberdare Official Photo.jpg
Type and origin
Power typeSteam
Designer William Dean
BuilderGWR Swindon Works
Order numberLots 123, 128, 131, 133, 135, 156, 166
Build date1900–1907
Total produced81
Specifications
Configuration:
   Whyte 2-6-0
   UIC 1′C n2
Gauge 4 ft 8+12 in (1,435 mm) standard gauge
Leading dia. 2 ft 8 in (0.813 m)
Driver dia.4 ft 7+12 in (1.410 m)
Firebox:
  Firegrate area
20.4 sq ft (1.90 m2)
Boiler
  • GWR Standard No. 2
  • Standard No. 4
Boiler pressure200 psi (1.38 MPa)
Cylinders Two, inside
Cylinder size 18 in × 26 in (457 mm × 660 mm)
Performance figures
Tractive effort 25,800  lbf (114.76  kN)
Career
Operators Great Western Railway, British Railways
Numbers2600–2679
Withdrawn1934–1949
DispositionAll scrapped

The Great Western Railway (GWR) 2600 Class or Aberdare Class was a class of 2-6-0 steam locomotive built between 1900 and 1907. They were a freight version of the 3300 and 4100 classes, both 4-4-0 locomotives. Therefore, the design was adapted and became a 2-6-0 type; the resulting locomotives were used for hauling coal trains between Aberdare and Swindon.

Contents

Numbering

The class began in 1900 with a prototype, No. 33, renumbered 2600 in 1912. The rest were numbered 2601–2680 and were built between 1901 and 1907.

Table of orders and numbers [1]
YearQuantityLots No.Serial Nos.Locomotive Nos.Notes
19001128188633renumbered 2600 in 1912
1901201311908–19272621–2640
1901–02201331929–19482641–2680
1902201351949–19682661–2680
1903101231796–18052611–2620Lot and serial numbers out of sequence
1906115621252601
190691662602–2610Renewal of 2602 Kruger class locomotives

British Railways

British Railways (BR) inherited nos. 2612/20/3/43/51/5/6/62/5/7/9/80 in 1948. [2] By 31 August 1948, only four were left: nos. 2620, 2651, 2655, 2667. [3]

Withdrawal

'Aberdare' No. 2636 passing Swindon 23 April 1946 a few months prior to withdrawal Swindon Station, with an ancient 'Aberdare' class 2-6-0 passing geograph-2522990-by-Ben-Brooksbank.jpg
'Aberdare' No. 2636 passing Swindon 23 April 1946 a few months prior to withdrawal

They were withdrawn from 1934 onwards. Five Aberdares (2640, 2648, 2649, 2652 & 2657) withdrawn in early 1939 were not cut up but stored as Second World War reserves. These five reentered service by January 1940. Their withdrawal began again in 1944 until the last member, number 2667, was withdrawn in October 1949. No examples were preserved.

Related Research Articles

<span class="mw-page-title-main">GWR 3300 Class</span>

The Bulldog and Bird classes were double-framed inside cylinder 4-4-0 steam locomotives used for passenger services on the Great Western Railway. The Bird Class were a development of the Bulldogs with strengthened outside frames, of which a total of fifteen were built. A total of 121 Bulldogs were built new, with a further twenty rebuilt from Duke Class locomotives. Thirty Bulldogs were later rebuilt as Earl Class locomotives and renumbered 3265, 3200-3228.

<span class="mw-page-title-main">GWR 3200 Class</span>

The Great Western Railway 3200 Class was a design of 4-4-0 steam locomotive for passenger train work. The nickname for this class, almost universally used at the time these engines were in service was Dukedog since the locomotives were composed of former Duke Class boilers on Bulldog Class frames. As such they were one of the last standard gauge steam locomotive classes to retain outside frames.

<span class="mw-page-title-main">GWR 2884 Class</span> Class of 2-8-0 steam locomotive

The Great Western Railway (GWR) 2884 Class is a class of 2-8-0 steam locomotive. They were Collett's development of Churchward's earlier 2800 Class and are sometimes regarded as belonging to that class.

<span class="mw-page-title-main">GWR 6959 Class</span> Development of the GWR Hall Class

The Great Western Railway (GWR) 6959 or Modified Hall Class is a class of 4-6-0 steam locomotive. They were a development by Frederick Hawksworth of Charles Collett's earlier Hall Class named after English and Welsh country houses.

<span class="mw-page-title-main">GWR 2251 Class</span>

The Great Western Railway (GWR) 2251 Class or Collett Goods Class was a class of 0-6-0 steam tender locomotives designed for medium-powered freight. They were introduced in 1930 as a replacement for the earlier Dean Goods 0-6-0s and were built up to 1948.

<span class="mw-page-title-main">GWR 5600 Class</span>

The GWR 5600 Class is a class of 0-6-2T steam locomotive built between 1924 and 1928. They were designed by Charles Collett for the Great Western Railway (GWR), and were introduced into traffic in 1924. After the 1923 grouping, Swindon inherited a large and variable collection of locomotives from historic Welsh railway companies, which did not fit into their standardisation programme. GWR boiler inspectors arrived en masse and either condemned the original locomotives or had them rebuilt. The systematic destruction of many examples of locomotives, most still in serviceable condition, followed, but various were worked alongside 5600 Class.

<span class="mw-page-title-main">GWR 4500 Class</span>

The Great Western Railway (GWR) 4500 Class or Small Prairie is a class of 2-6-2T steam locomotives.

<span class="mw-page-title-main">GWR 2301 Class</span>

The Great Western Railway (GWR) 2301 Class or Dean Goods Class is a class of British 0-6-0 steam locomotives.

The Great Western Railway (GWR) 3600 Class was a class of 2-4-2T side tank steam locomotive, designed by William Dean and built at Swindon in three lots in 1900-1903:

The GWR 378 Class was a class of 30 standard-gauge 2-2-2 steam locomotives on the Great Western Railway in Britain. They were introduced in 1866, and the class remained intact until 1898. Several were altered to the 0-6-0 wheel arrangement, and the last was withdrawn from service in 1920.

The GWR 360 Class was a small series of 0-6-0 freight steam locomotives designed for the Great Western Railway by Joseph Armstrong and built at Swindon Works in 1866.

<span class="mw-page-title-main">GWR 481 Class</span>

The GWR 481 Class was a class of 20 2-4-0 mixed-traffic steam locomotives designed for the Great Western Railway by Joseph Armstrong and built at Swindon Works in 1869. They were similar in size to the 439 Class but differed in appearance, thanks to the flowing lines of their outside frames.

The 806 Class was Joseph Armstrong's last design of 2-4-0 mixed-traffic locomotives for the Great Western Railway, built at Swindon Works in 1873. A further 20 similar locomotives were added by Armstrong's successor William Dean in 1881-2; numbered 2201–2220, these had modern domeless boilers. The class had a similar appearance to the 717 Class but had driving wheels 6 in (152 mm) larger.

The GWR 56 Class were 2-4-0 tender locomotives designed for the Great Western Railway by Joseph Armstrong and built at Swindon Works between 1871 and 1872.

<span class="mw-page-title-main">GWR 455 Class</span>

The GWR 455 Class, also called the "Metropolitan" or "Metro" Tanks, was a series of 140 2-4-0T locomotives built for the Great Western Railway, originally for their London suburban services, including running on the underground section of the Metropolitan Railway, the source of their nickname. Later on the class was seen on many other parts of the GWR system. Sixty "Metro" Tanks were built, from 1868 onwards, during the lifetime of their designer, Joseph Armstrong. His successor William Dean regarded the class so highly that he would add a further 80, the final 20 examples appearing as late as 1899. The "Metros" were all built at Swindon Works, in nine lots of ten or 20 engines each.

The GWR 633 Class were 0-6-0Ts designed by George Armstrong and built at the Wolverhampton railway works of the Great Western Railway between November 1871 and April 1872. These were always Southern Division locomotives, but over the years some were fitted to work the Metropolitan lines and played a large role in the transportation of goods from Acton to Smithfield. Unusually, they had side tanks, and inside frames, with wheels of 4 ft 6+12 in (1,384 mm) in diameter and a wheelbase of 15 ft 6 in (4.72 m). Their weight was 34 long tons 12 cwt. There were twelve locomotives, numbered 633–644.

The Great Western Railway's 1813 Class was a series of 40 0-6-0T built at Swindon Works in two lots of 20 engines each. No. 1813 was sold to the Pembroke & Tenby Railway in May 1883 becoming No.7 Holmwood, retaining this name after being absorbed by the GWR. Nearly all of these engines spent their lives on the GWR's Southern Division.

The 1661 Class was William Dean's second design of tank locomotive for England's Great Western Railway. Like the 1813 Class which preceded them, there were 40 1661s, turned out of Swindon Works in two batches.

The GWR 1854 Class was a class of 0-6-0T steam locomotives designed by William Dean and constructed at the Swindon Works of the Great Western Railway. The class used similar inside frames and chassis dimensions to the 1813 Class of 1882-4. In this they differed from the intervening 1661 Class, which had reverted to the double frames of the Armstrong era. Thus the 1854 Class belongs to the "mainstream" of GWR 0-6-0T classes that leads towards the larger GWR pannier tanks of the 20th century.

<span class="mw-page-title-main">GWR 2602 Class</span>

The 2602 Class was a series of steam locomotives designed by William Dean and built at the Swindon Works of the Great Western Railway.

References

  1. Allcock et al. (1968), pp. 23, 29–30.
  2. le Fleming (1954), p. G43.
  3. British Railways Locomotives 1948, Part 1. London: Ian Allan. 1948. pp. 11, 17.