Computer cartography

Last updated
Example of a digital map. Pictured is percentage of Australian population that identifies as Anglican. Australian Census 2011 demographic map - Australia by SLA - BCP field 2715 Christianity Anglican Persons.svg
Example of a digital map. Pictured is percentage of Australian population that identifies as Anglican.

Computer cartography (also called digital cartography) is the art, science, and technology of making and using maps with a computer. [1] [2] [3] This technology represents a paradigm shift in how maps are produced, but is still fundamentally a subset of traditional cartography. [3] [4] The primary function of this technology is to produce maps, including creation of accurate representations of a particular area such as, detailing major road arteries and other points of interest for navigation, and in the creation of thematic maps. Computer cartography is one of the main functions of geographic information systems (GIS), however, GIS is not necessary to facilitate computer cartography and has functions beyond just making maps. [5] [6] The first peer-reviewed publications on using computers to help in the cartographic process predate the introduction of full GIS by several years. [7]

Contents

Computer cartography is employed to facilitate a variety of computer applications, often through integration with the Global Positioning System (GPS) satellite network. This can allow real-time automated map generation for tasks such as automotive navigation systems.

History

From paper to paperless

In the 1959, Waldo Tobler published a paper titled "Automation and Cartography" that established the first use case for computers as aids in cartography. [7] In this paper, Tobler established what he referred to as a "map in–map out" (MIMO) system, which facilitated digitization of traditional maps, changing them, and reproducing them. [7] [8] The MIMO system, while simple, established the use of computers for map making in the literature and set the stage for more advanced geographic information systems in later years by geographers such as Roger Tomlinson. [8] The rapid acceleration that followed lead to a rapid paradigm shift in cartography, where traditional cartography was replaced by computer-aided cartography. This was predicted in 1985, when Mark Monmonier speculated in his book Technological Transition in Cartography that computer cartography facilitated by GIS would largely replace traditional pen and paper cartography. [4] It is believed that the milestone of more maps created and distributed with computers was achieved sometime in the mid-1990s. [9]

Expanded capabilities

Early digital maps had the same basic functionality as paper maps—that is, they provided a "virtual view" of roads generally outlined by the terrain encompassing the surrounding area. However, as digital maps have grown with the expansion of GPS technology in the past decade, live traffic updates, [10] points of interest and service locations have been added to enhance digital maps to be more "user conscious". [11] Traditional "virtual views" are now only part of digital mapping. In many cases, users can choose between virtual maps, satellite (aerial views), and hybrid (a combination of virtual map and aerial views) views. With the ability to update and expand digital mapping devices, newly constructed roads and places can be added to appear on maps.[ citation needed ] Three-dimensional maps of landscapes can be generated using 3D scanners or 3D reconstruction software. [12]

Data collection

Digital maps heavily rely upon a vast amount of data collected over time. Most of the information that comprise digital maps is the culmination of satellite imagery as well as street level information. Maps must be updated frequently to provide users with the most accurate reflection of a location. While there is a wide spectrum on companies that specialize in digital mapping, the basic premise is that digital maps will accurately portray roads as they actually appear to give "life-like experiences". [13]

Functionality and Use

Computer applications

Proprietary and non-proprietary computer programs and applications provide imagery and street-level map data for much of the world.

Scientific applications

The development of mobile computing (PDAs, tablet PCs, laptops, etc.) has recently (since about 2000) spurred the use of digital mapping in the sciences and applied sciences. As of 2009, science fields that use digital mapping technology include geology (see Digital geologic mapping), engineering, architecture, land surveying, mining, forestry, environmental, and archaeology.

GPS navigation systems

The principal use by which digital mapping has grown in the past decade has been its connection to Global Positioning System (GPS) technology. [14] GPS is the foundation behind digital mapping navigation systems.

How it works

The coordinates and position as well as atomic time obtained by a terrestrial GPS receiver from GPS satellites orbiting Earth interact together to provide the digital mapping programming with points of origin in addition to the destination points needed to calculate distance. This information is then analyzed and compiled to create a map that provides the easiest and most efficient way to reach a destination.

More technically speaking, the device operates in the following manner: [15]
  1. GPS receivers collect data from at least four GPS satellites orbiting the Earth, calculating position in three dimensions.
  2. The GPS receiver then utilizes position to provide GPS coordinates, or exact points of latitudinal and longitudinal direction from GPS satellites.
  3. The points, or coordinates, output an accurate range between approximately "10-20 meters" of the actual location.
  4. The beginning point, entered via GPS coordinates, and the ending point, (address or coordinates) input by the user, are then entered into the digital mapping software.
  5. The mapping software outputs a real-time visual representation of the route. The map then moves along the path of the driver.
  6. If the driver drifts from the designated route, the navigation system will use the current coordinates to recalculate a route to the destination location.

See also

Related Research Articles

<span class="mw-page-title-main">Cartography</span> Study and practice of making maps

Cartography is the study and practice of making and using maps. Combining science, aesthetics and technique, cartography builds on the premise that reality can be modeled in ways that communicate spatial information effectively.

<span class="mw-page-title-main">Geographic information system</span> System to capture, manage and present geographic data

A geographic information system (GIS) consists of integrated computer hardware and software that store, manage, analyze, edit, output, and visualize geographic data. Much of this often happens within a spatial database, however, this is not essential to meet the definition of a GIS. In a broader sense, one may consider such a system also to include human users and support staff, procedures and workflows, the body of knowledge of relevant concepts and methods, and institutional organizations.

<span class="mw-page-title-main">Topographic map</span> Medium to large scale map that shows a precise map of the terrain

In modern mapping, a topographic map or topographic sheet is a type of map characterized by large-scale detail and quantitative representation of relief features, usually using contour lines, but historically using a variety of methods. Traditional definitions require a topographic map to show both natural and artificial features. A topographic survey is typically based upon a systematic observation and published as a map series, made up of two or more map sheets that combine to form the whole map. A topographic map series uses a common specification that includes the range of cartographic symbols employed, as well as a standard geodetic framework that defines the map projection, coordinate system, ellipsoid and geodetic datum. Official topographic maps also adopt a national grid referencing system.

A waypoint is an intermediate point or place on a route or line of travel, a stopping point or point at which course is changed, the first use of the term tracing to 1880. In modern terms, it most often refers to coordinates which specify one's position on the globe at the end of each "leg" (stage) of an air flight or sea passage, the generation and checking of which are generally done computationally.

Ground truth is information that is known to be real or true, provided by direct observation and measurement as opposed to information provided by inference.

<span class="mw-page-title-main">Photogrammetry</span> Taking measurements using photography

Photogrammetry is the science and technology of obtaining reliable information about physical objects and the environment through the process of recording, measuring and interpreting photographic images and patterns of electromagnetic radiant imagery and other phenomena.

<span class="mw-page-title-main">Geodetic datum</span> Reference frame for measuring location

A geodetic datum or geodetic system is a global datum reference or reference frame for precisely representing the position of locations on Earth or other planetary bodies by means of geodetic coordinates. Datums are crucial to any technology or technique based on spatial location, including geodesy, navigation, surveying, geographic information systems, remote sensing, and cartography. A horizontal datum is used to measure a location across the Earth's surface, in latitude and longitude or another coordinate system; a vertical datum is used to measure the elevation or depth relative to a standard origin, such as mean sea level (MSL). Since the rise of the global positioning system (GPS), the ellipsoid and datum WGS 84 it uses has supplanted most others in many applications. The WGS 84 is intended for global use, unlike most earlier datums.

<span class="mw-page-title-main">Waldo R. Tobler</span> American geographer

Waldo Rudolph Tobler was an American-Swiss geographer and cartographer. Tobler is regarded as one of the most influential geographers and cartographers of the late 20th century and early 21st century. He is most well known for coining what has come to be referred to as Tobler's first law of geography. He also coined what has come to be referred to as Tobler's second law of geography.

<span class="mw-page-title-main">Automotive navigation system</span> Part of the automobile controls

An automotive navigation system is part of the automobile controls or a third party add-on used to find direction in an automobile. It typically uses a satellite navigation device to get its position data which is then correlated to a position on a road. When directions are needed routing can be calculated. On the fly traffic information can be used to adjust the route.

<span class="mw-page-title-main">Virtual globe</span> 3D software model or representation of Earth or another world

A virtual globe is a three-dimensional (3D) software model or representation of Earth or another world. A virtual globe provides the user with the ability to freely move around in the virtual environment by changing the viewing angle and position. Compared to a conventional globe, virtual globes have the additional capability of representing many different views of the surface of Earth. These views may be of geographical features, man-made features such as roads and buildings, or abstract representations of demographic quantities such as population.

Participatory GIS (PGIS) or public participation geographic information system (PPGIS) is a participatory approach to spatial planning and spatial information and communications management.

Collaborative mapping, also known as citizen mapping, is the aggregation of Web mapping and user-generated content, from a group of individuals or entities, and can take several distinct forms. With the growth of technology for storing and sharing maps, collaborative maps have become competitors to commercial services, in the case of OpenStreetMap, or components of them, as in Google Map Maker Waze and Yandex Map Editor.

Distributed GIS refers to GI Systems that do not have all of the system components in the same physical location. This could be the processing, the database, the rendering or the user interface. It represents a special case of distributed computing, with examples of distributed systems including Internet GIS, Web GIS, and Mobile GIS. Distribution of resources provides corporate and enterprise-based models for GIS. Distributed GIS permits a shared services model, including data fusion based on Open Geospatial Consortium (OGC) web services. Distributed GIS technology enables modern online mapping systems, Location-based services (LBS), web-based GIS and numerous map-enabled applications. Other applications include transportation, logistics, utilities, farm / agricultural information systems, real-time environmental information systems and the analysis of the movement of people. In terms of data, the concept has been extended to include volunteered geographical information. Distributed processing allows improvements to the performance of spatial analysis through the use of techniques such as parallel processing.

<span class="mw-page-title-main">Geography</span> Study of lands and inhabitants of Earth

Geography is the study of the lands, features, inhabitants, and phenomena of Earth. Geography is an all-encompassing discipline that seeks an understanding of Earth and its human and natural complexities—not merely where objects are, but also how they have changed and come to be. While geography is specific to Earth, many concepts can be applied more broadly to other celestial bodies in the field of planetary science. Geography has been called "a bridge between natural science and social science disciplines."

Quantitative geography is a subfield and methodological approach to geography that develops, tests, and uses scientific, mathematical, and statistical methods to analyze and model geographic phenomena and patterns. It aims to explain and predict the distribution and dynamics of human and physical geography through the collection and analysis of quantifiable data. The approach quantitative geographers take is generally in line with the scientific method, where a falsifiable hypothesis is generated, and then tested through observational studies. This has received criticism, and in recent years, quantitative geography has moved to include systematic model creation and understanding the limits of their models. This approach is used to study a wide range of topics, including population demographics, urbanization, environmental patterns, and the spatial distribution of economic activity. The methods of quantitative geography are often contrasted by those employed by qualitative geography, which is more focused on observing and recording characteristics of geographic place. However, there is increasing interest in using combinations of both qualitative and quantitative methods through mixed-methods research to better understand and contextualize geographic phenomena.

Geographic information systems (GIS) play a constantly evolving role in geospatial intelligence (GEOINT) and United States national security. These technologies allow a user to efficiently manage, analyze, and produce geospatial data, to combine GEOINT with other forms of intelligence collection, and to perform highly developed analysis and visual production of geospatial data. Therefore, GIS produces up-to-date and more reliable GEOINT to reduce uncertainty for a decisionmaker. Since GIS programs are Web-enabled, a user can constantly work with a decision maker to solve their GEOINT and national security related problems from anywhere in the world. There are many types of GIS software used in GEOINT and national security, such as Google Earth, ERDAS IMAGINE, GeoNetwork opensource, and Esri ArcGIS.

<span class="mw-page-title-main">Mobile mapping</span>

Mobile mapping is the process of collecting geospatial data from a mobile vehicle, typically fitted with a range of GNSS, photographic, radar, laser, LiDAR or any number of remote sensing systems. Such systems are composed of an integrated array of time synchronised navigation sensors and imaging sensors mounted on a mobile platform. The primary output from such systems include GIS data, digital maps, and georeferenced images and video.

<span class="mw-page-title-main">Technical geography</span> Study of using and creating tools to manage spatial information

Technical geography is the branch of geography that involves using, studying, and creating tools to obtain, analyze, interpret, understand, and communicate spatial information.

<span class="mw-page-title-main">Internet GIS</span> Internet technologies regarding spatial data

Internet GIS, or Internet geographic information system (GIS), is a term that refers to a broad set of technologies and applications that employ the Internet to access, analyze, visualize, and distribute spatial data. Internet GIS is an outgrowth of traditional GIS, and represents a shift from conducting GIS on an individual computer to working with remotely distributed data and functions. Two major issues in GIS are accessing and distributing spatial data and GIS outputs. Internet GIS helps to solve that problem by allowing users to access vast databases impossible to store on a single desktop computer, and by allowing rapid dissemination of both maps and raw data to others. These methods include both file sharing and email. This has enabled the general public to participate in map creation and make use of GIS technology.

<span class="mw-page-title-main">Web GIS</span> Technologies employing the World Wide Web to manage spatial data

Web GIS, or Web Geographic Information Systems, are GIS that employ the World Wide Web to facilitate the storage, visualization, analysis, and distribution of spatial information over the Internet. The World Wide Web, or the Web, is an information system that uses the internet to host, share, and distribute documents, images, and other data. Web GIS involves using the World Wide Web to facilitate GIS tasks traditionally done on a desktop computer, as well as enabling the sharing of maps and spatial data. While Web GIS and Internet GIS are sometimes used interchangeably, they are different concepts. Web GIS is a subset of Internet GIS, which is itself a subset of distributed GIS, which itself is a subset of broader Geographic information system. The most common application of Web GIS is Web mapping, so much so that the two terms are often used interchangeably in much the same way as Digital mapping and GIS. However, Web GIS and web mapping are distinct concepts, with web mapping not necessarily requiring a Web GIS.

References

  1. ↑ Clark, Keith (1995). Analytic and Computer Cartography. Prentice Hall. ISBN   0133419002.
  2. ↑ Monmonier, Mark (1982). Computer-Assisted Cartography: Principles and Prospects 1st Edition (1 ed.). Pearson College Div. ISBN   978-0131653085.
  3. 1 2 Kainz, Wolfgang (21 October 2019). "Cartography and the others – aspects of a complicated relationship". Geo-spatial Information Science. 23 (1): 52–60. doi: 10.1080/10095020.2020.1718000 . S2CID   214162170.
  4. 1 2 Monmonier, Mark (1985). Technological Transition in Cartography (1 ed.). Univ of Wisconsin. ISBN   0299100707.
  5. ↑ DeMers, Michael (2009). Fundamentals of Geographic Information Systems (4th ed.). John Wiley & Sons, inc. ISBN   978-0-470-12906-7.
  6. ↑ Chang, Kang-tsung (2016). Introduction to Geographic Information Systems (9th ed.). McGraw-Hill. p. 1. ISBN   978-1-259-92964-9.
  7. 1 2 3 Tobler, Waldo (1959). "Automation and Cartography". Geographical Review. 49 (4): 526–534. Bibcode:1959GeoRv..49..526T. doi:10.2307/212211. JSTOR   212211 . Retrieved 10 March 2022.
  8. 1 2 DeMers, Michael N. "GIS". Encyclopedia Britannica. Retrieved 5 September 2023.
  9. ↑ Peterson, Michael P. (2014). Mapping in the Cloud . New York: The Guiford Press. ISBN   978-1-4625-1041-2. OCLC   855580732.
  10. ↑ "Navigation device assisting road traffic congestion management." FreshPatents.com. 9 March 2007. http://www.freshpatents.com/Navigation-device-assisting-road-traffic-congestion-management-dt20080925ptan20080234921.php Archived 2014-06-06 at the Wayback Machine . 12 Oct. 2008.
  11. ↑ Husby, Jonathon. "In-car navigation matures beyond ‘Point A to Point B’." Electronic Engineering Times. 28 Jan. 2008. http://www.automotivedesignline.com Archived 2011-09-30 at the Wayback Machine . 12 Oct. 2008.
  12. ↑ Remondino, Fabio. "Heritage recording and 3D modeling with photogrammetry and 3D scanning Archived 2022-10-10 at the Wayback Machine ." Remote Sensing 3.6 (2011): 1104-1138.
  13. ↑ "City Maps" Tele Atlas BV. 2008. http://www.teleatlas.com/OurProducts/MapEnhancementProducts/CityMaps/index.htm Archived 2011-09-27 at the Wayback Machine . 12 Oct. 2008.
  14. ↑ "United States Updates Global Positioning System Technology." America.gov. 3 Feb. 2006. http://www.america.gov/st/washfile-english/2006/February/20060203125928lcnirellep0.5061609.html Archived 2008-01-29 at the Wayback Machine . 12 Oct. 2008.
  15. ↑ "How Does GPS Work?" Smithsonian Institution. 1998. http://www.nasm.si.edu/exhibitions/gps/work.html Archived 2008-11-09 at the Wayback Machine . 12 Oct. 2008.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.