Double switch (baseball)

Last updated

In baseball, the double switch is a type of player substitution, usually performed by a team while playing defense. The double switch is typically used to make a pitching substitution, while simultaneously placing the incoming pitcher in a more favorable spot in the batting order than was occupied by the outgoing pitcher. (On the assumption that the pitcher will be a poor hitter, the incoming pitcher will generally take the spot in the batting order of a position player who has recently batted, so as to reduce the chance that the pitcher will make a plate appearance in the next few innings.) To perform a double switch (or any other substitution), the ball must be dead. [1] :Rule 3.03

Contents

Procedure

Since the batting order can be changed only as a result of a player substitution, [Note 1] while the defensive arrangement may be changed freely (among players currently in the game), the double switch typically takes the following form:

  1. Player A (outgoing pitcher, batting soon) is replaced by Player B (a position player), taking Player A's place in the batting order.
  2. Player C (outgoing position player, batting later than Player A) is replaced by Player D (a pitcher), taking Player C's place in the batting order.
  3. Player D is pitching in place of Player A, and Player B is fielding in place of Player C. [Note 2]

In the short term, the lineup is strengthened because a poor-hitting pitcher will not make a plate appearance soon. The disadvantage is that a position player must be removed from play and replaced by another, often inferior, position player. The advantage of the double switch over pinch hitting is that it uses up fewer players. If a relief pitcher is brought in before the at-bat, then the manager can substitute a pinch-hitter for him. However, this would require a new pitcher for the next half-inning. By using a double switch, an incoming pitcher can be left in the game for a substantial period before his turn in the batting lineup arrives, no matter what the previous batting order was.

While the double switch plays an important role in the National League, the designated hitter (DH) rule has effectively eliminated the advantages of the double switch in the games using American League rules—so the double switch is rarely used in AL games. [2] The designated hitter's role is to bat in the pitcher's spot in the lineup. [1] :Rule 6.10(b) Major League rules do not allow a multiple substitution involving a DH to alter the lineup position of the DH. [1] :Rule 6.10(b) Although uncommon, it is possible to forgo the DH privilege (e.g. if the DH becomes a position player, usually due to injury to another player), and then utilize the double switch later with that player. It can also be used by an AL team playing on the road during interleague play or the World Series, because MLB rules call for the rules of the home team to be used when teams from different leagues meet (so there is no DH when the NL team is the home team). As of the 2022 CBA, MLB has implemented a universal designated hitter, eliminating the need for the double-switch.

When the team is up to bat, a manager can get the same effect as a double switch by leaving in the player who has pinch-hit for the pitcher and replacing another player in the lineup who has made the last out of the inning with a new pitcher. This will take the following form:

  1. Player A (outgoing pitcher, batting next) is replaced by Player B (a position player) as a pinch-hitter, taking Player A's place in the batting order.
  2. Player C makes the last out of the inning is replaced by Player D (a pitcher), taking Player C's place in the batting order.
  3. Player D is pitching in place of Player A, and Player B is fielding in place of Player C.

A double switch has infrequently resulted in a team batting out of turn because the lineup card was not updated to reflect the change, either because the umpires were not informed of the change, or because the change was not recorded. [3] In addition, because double-switches are typically communicated verbally, it creates opportunities for confusion and miscommunication that can be costly to the switching team. [4]

Notes

  1. No player currently in the game may legally bat in place of another player in the game (except as a result of the designated hitter rule [1] :Rule 6.10(b)). However, it is possible to successfully bat out of order, if the opposing team does not appeal the violation. [1] :Rule 6.07
  2. According to Major League rules, when more than one defensive substitution is made at the same time, the manager must specify any changes to the batting order, or the umpire-in-chief will determine the order by applying Rule 3.03, which states that "[a] substitute player shall bat in the replaced player’s position in the team’s batting order." [1] :Rule 3.03

Related Research Articles

At bat Baseball term for a valid batting attempt

In baseball, an at bat (AB) or time at bat is a batter's turn batting against a pitcher. An at bat is different from a plate appearance. A batter is credited with a plate appearance regardless of what happens during their turn at bat, but a batter is credited with an at bat only if that plate appearance does not have one of the results enumerated below. While at bats are used to calculate certain statistics, including batting average and slugging percentage, a player can qualify for the season-ending rankings in these categories only if they accumulate 502 plate appearances during the season.

Baseball Bat-and-ball game

Baseball is a bat-and-ball game played between two opposing teams, of nine players each, that take turns batting and fielding. The game proceeds when a player on the fielding team, called the pitcher, throws a ball which a player on the batting team tries to hit with a bat. The objective of the offensive team is to hit the ball into the field of play, allowing its players to run the bases, having them advance counter-clockwise around four bases to score what are called "runs". The objective of the defensive team is to prevent batters from becoming runners, and to prevent runners' advance around the bases. A run is scored when a runner legally advances around the bases in order and touches home plate. The team that scores the most runs by the end of the game is the winner.

Designated hitter Offensive position in baseball and softball

The designated hitter (DH) is a baseball player who bats in place of the another position player, most commonly but not always the pitcher. The position is authorized by Major League Baseball Rule 5.11. It was adopted by the American League in 1973 and by Major League Baseball universally in 2022. Within that time frame, nearly all amateur, collegiate, and professional leagues have adopted the rule or some variant with the notable exception of Nippon Professional Baseball's Central League.

Batting order (baseball)

In baseball, the batting order or batting lineup is the sequence in which the members of the offense take their turns in batting against the pitcher. The batting order is the main component of a team's offensive strategy. In Major League Baseball, the batting order is set by the manager, who before the game begins must present the home plate umpire with two copies of his team's lineup card, a card on which a team's starting batting order is recorded. The home plate umpire keeps one copy of the lineup card of each team, and gives the second copy to the opposing manager. Once the home plate umpire gives the lineup cards to the opposing managers, the batting lineup is final and a manager can only make changes under the Official Baseball Rules governing substitutions. If a team bats out of order, it is a violation of baseball's rules and subject to penalty.

Baseball rules Overview of the rules of baseball at different levels and in different countries

The rules of baseball differ slightly from league to league, but in general share the same basic game play.

Pinch hitter Term for a substitute batter in baseball and softball

In baseball, a pinch hitter is a substitute batter. Batters can be substituted at any time while the ball is dead ; the manager may use any player who has not yet entered the game as a substitute. Unlike basketball, American football or ice hockey, and in a similar way to association football, baseball does not have a "free substitution rule" and thus the replaced player in baseball is not allowed back into that game. The pinch hitter assumes the spot in the batting order of the player whom he replaces.

Cleanup hitter Baseball position

In baseball, a cleanup hitter is the fourth hitter in the batting order. The cleanup hitter is traditionally the team's most powerful hitter. His job is to "clean up the bases", i.e., drive in base runners.

Batting (baseball) Baseball offensive act of facing the pitcher and attempting to hit the ball into play

In baseball, batting is the act of facing the opposing pitcher and trying to produce offense for one's team. A batter or hitter is a person whose turn it is to face the pitcher. The three main goals of batters are to become a baserunner, to drive runners home or to advance runners along the bases for others to drive home, but the techniques and strategies they use to do so vary. Hitting uses a motion that is virtually unique to baseball and its fellow bat-and-ball sports, one that is rarely used in other sports. Hitting is unique because it involves rotating in the horizontal plane of movement, unlike most sports movements which occur in the vertical plane.

Box score (baseball) Statistical summary of a game of baseball

A box score is a chart used in baseball to present data about player achievement in a particular game. An abbreviated version of the box score, duplicated from the field scoreboard, is the line score. The Baseball Hall of Fame credits Henry Chadwick with the invention of the box score in 1858.

Starting lineup Official list of players set to participate upon the beginning of a sporting event

In sports, a starting lineup is an official list of the set of players who will participate in the event when the game begins. The players in the starting lineup are commonly referred to as starters, whereas the others are substitutes or bench players.

Baseball scorekeeping

Baseball scorekeeping is the practice of recording the details of a baseball game as it unfolds. Professional baseball leagues hire official scorers to keep an official record of each game, but many fans keep score as well for their own enjoyment. Scorekeeping is usually done on a printed scorecard and, while official scorers must adhere precisely to one of the few different scorekeeping notations, most fans exercise some amount of creativity and adopt their own symbols and styles.

In baseball, the left right switch is a maneuver by which a player that struggles against left- or right-handed players is replaced by a player who excels in the situation, usually only for the duration of the situation in question. For instance, a right-handed pitcher who is weak against left-handed hitting and is facing a left-handed hitter would be replaced with a pitcher, usually left-handed, who does a superior job of getting a left-handed hitter out. Similarly, a batter who has difficulty hitting against a left-handed pitcher will sometimes be pinch hit for by a batter who does well, even if the original player is superior in other respects.

Jason Lane American baseball player & coach

Jason Dean Lane is an American professional baseball former player and current coach. He is the third base coach for the Milwaukee Brewers of Major League Baseball (MLB). He played in the MLB for the Houston Astros and San Diego Padres. Originally starting his career as an outfielder, Lane switched positions and became a pitcher.

A defensive substitution in the game of baseball occurs when a currently non-playing player is placed into the field in place of another player, typically due either to injury or the appearance of a pinch hitter. In the American League, a pinch hitter is usually substituted for the position player in whose place he batted. In the National League, which does not use the designated hitter rule, pinch hitters sometimes bat for pitchers. However, another common pitcher-substitution strategy in the NL is the double switch, in which a pitching change is coupled with a pinch-hitter who is also defensively substituted for a second player.

This is an alphabetical list of selected unofficial and specialized terms, phrases, and other jargon used in baseball, along with their definitions, including illustrative examples for many entries.

2010 Major League Baseball All-Star Game

The 2010 Major League Baseball All-Star Game was the 81st midseason exhibition between the All-Stars of the American League (AL) and the National League (NL), the two leagues comprising Major League Baseball. The game was held on July 13, 2010, at Angel Stadium of Anaheim, the home of the American League Los Angeles Angels of Anaheim, and was telecast by Fox Sports in the US, with Joe Buck and Tim McCarver in the broadcast booth. Fox also teamed with DirecTV to produce a separate 3D broadcast, the first ever for a network Major League Baseball game. Kenny Albert and Mark Grace called the 3D telecast. ESPN Radio also broadcast the game, with Jon Sciambi and Dave Campbell announcing. The National League won the game 3–1, ending a 13-game winless streak.

The 1947 Major League Baseball All-Star Game was the 14th playing of the "Midsummer Classic" between Major League Baseball's (MLB) American League (AL) and National League (NL) All-Star teams. The All-Star Game was held on July 8, 1947, at Wrigley Field in Chicago, the home of the NL's Chicago Cubs.

References

  1. 1 2 3 4 5 6 Official Baseball Rules (1987 ed.), St. Louis, MO, U.S.A.: The Sporting News, 1987 [1949], ISBN   978-0-89204-240-1, ISSN   0078-3846, OCLC   15686302, This code of rules is written to govern the playing of baseball games by professional teams of the American League of Professional Baseball Clubs, the National League of Professional Baseball Clubs, and the leagues which are members of the National Association of Professional Baseball Leagues. (Current edition available online from Major League Baseball.)
  2. Chass, Murray (June 14, 1997), "Look Closely, It's N.L. Magic: A Double Switch", The New York Times , retrieved April 24, 2009
  3. "Baker, umps not on same page on double switch", ESPN.com, Chicago, IL, U.S.A.: Associated Press, April 16, 2004, retrieved April 24, 2009
  4. "Twins lose to Dodgers in long game featuring odd delay", startribune.com, Los Angeles, CA, U.S.A.: Star Tribune, July 26, 2017, retrieved July 26, 2017