Sacrifice bunt

Last updated

In baseball, a sacrifice bunt (also called a sacrifice hit) is a batter's act of deliberately bunting the ball, before there are two outs, in a manner that allows a baserunner to advance to another base. The batter is almost always put out, and hence sacrificed (to a certain degree that is the intent of the batter), but sometimes reaches base on an error or fielder's choice. In that situation, if runners still advance bases, it is still scored a sacrifice bunt instead of the error or the fielder's choice. Sometimes the batter may safely reach base by simply outrunning the throw to first; this is not scored as a sacrifice bunt but rather a single.

Contents

A successful sacrifice bunt does not count as an at bat, does not impact a player's batting average, and counts as a plate appearance. Unlike a sacrifice fly, a sacrifice bunt is not included in the calculation of the player's on-base percentage. If the official scorer believes that the batter was attempting to bunt for a base hit and not solely to advance the runners, the batter is charged an at bat and is not credited with a sacrifice bunt.

In leagues without a designated hitter, sacrifice bunts are most commonly attempted by pitchers, who are typically not productive hitters. Managers consider that if a pitcher's at bat will probably result in an out, they might as well go out in a way most likely to advance the runners. The play also obviates the need for the pitcher to run the base paths, and hence avoids the risk of injury. Some leadoff hitters also bunt frequently in similar situations and may be credited with a sacrifice, but as they are often highly skilled bunters and faster runners, they are often trying to get on base as well as advance runners.

A sacrifice bunt attempted while a runner is on third is called a squeeze play. A sacrifice bunt attempted while a runner on third is attempting to steal home is called a suicide squeeze.

Although a sacrifice bunt is not the same as a sacrifice fly, both fell under the same statistical category until 1954.

In scoring, a sacrifice bunt may be denoted by SH, S, or, occasionally, SAC.

Notable players with 300 or more sacrifice bunts

The following players have accumulated 300 or more sacrifice bunts in their playing careers:

Major League Baseball (MLB) [1]
Active MLB leaders (as of end of 2017 season) [2]
  1. 100: Elvis Andrus (SS)
  2. 89: Clayton Kershaw (P)
  3. 84: Johnny Cueto (P)
  4. 77: Alcides Escobar (SS)
  5. 75: Erick Aybar (INF)
Nippon Professional Baseball

Since the beginning of the live-ball era (1920), the career leader in sacrifice bunts is Joe Sewell with 275. He was first called up by the Cleveland Indians late in the 1920 season shortly after Indians star shortstop Ray Chapman died after being hit in the head by a pitch, the event which is generally regarded as the start of the live-ball era.

Criticism

Though touted as good strategy by traditionalists, the sacrifice bunt has received significant criticism by modern sabermetrics. Simply, sabermetricians argue that the value of moving a runner to another base is offset by the team's sacrificing one of its limited and valuable 27 outs. An out conceded is an out wasted, in other words.

The following stats illustrate the argument. From 1993–2010, if a team had a runner on first base with no outs, on average it would score .941 runs from that point until the end of the inning. If a team had a runner on second base with one out, however, the average was .721 runs from that point forward. Thus, if a batter walks to lead off an inning, that team will, on average, score almost one run in the inning. On the other hand, that team decreases its run expectancy by 23 percent [(1 - 0.721/0.941) * 100%] if it successfully bunts and moves the runner to second with one out. [3] [4]

Complicating affairs are the many difficulties and risks associated with bunting. The runner or runners on base must have speed, or the defense may get an easy force out. A manager could feasibly pinch run, but then his bench becomes smaller (that is, there are fewer substitute players available). The player at the plate must also lay down a quality bunt. That is, the player must lay down a bunt that does not pop up, go foul, or go straight to a fielder. Even if all goes well, if the sacrifice bunt is successful, the team must still get a hit to score the runner, and they now have 2 outs remaining instead of three. [5] [6]

Writing for Baseball Prospectus in 2004, James Click concluded that pitchers should nearly always sacrifice bunt when the option is available to them, and that most position players should sacrifice bunt with a runner on second and no outs in situations where scoring at least one run is more important than maximizing run output (i.e. in the late innings of a close game). In all other situations, he found that sacrifice bunting hurts the sacrificing team more than it helps. [7]

Related Research Articles

Baseball statistics refers to a variety of metrics used to evaluate player and team performance in the game of baseball.

<span class="mw-page-title-main">At bat</span> Baseball term for a valid batting attempt

In baseball, an at bat (AB) or time at bat is a batter's turn batting against a pitcher. An at bat is different from a plate appearance. A batter is credited with a plate appearance regardless of what happens during their turn at bat, but a batter is charged with an at bat only if that plate appearance does not have one of the results enumerated below. While at bats are used to calculate certain statistics, including batting average and slugging percentage, a player can qualify for the season-ending rankings in these categories only if they accumulate 502 plate appearances during the season.

In baseball, an earned run is any run that was fully enabled by the offensive team's production in the face of competent play from the defensive team. Conversely, an unearned run is a run that would not have been scored without the aid of an error or a passed ball committed by the defense.

<span class="mw-page-title-main">Stolen base</span> In baseball, when a runner advances one or more bases before the ball has been batted

In baseball, a stolen base occurs when a runner advances to a base unaided by other actions and the official scorer rules that the advance should be credited to the action of the runner. The umpires determine whether the runner is safe or out at the next base, but the official scorer rules on the question of credit or blame for the advance under Rule 10 of the MLB's Official Rules.

<span class="mw-page-title-main">Baseball</span> Bat-and-ball game

Baseball is a bat-and-ball sport played between two teams of nine players each, taking turns batting and fielding. The game occurs over the course of several plays, with each play generally beginning when a player on the fielding team, called the pitcher, throws a ball that a player on the batting team, called the batter, tries to hit with a bat. The objective of the offensive team is to hit the ball into the field of play, away from the other team's players, allowing its players to run the bases, having them advance counter-clockwise around four bases to score what are called "runs". The objective of the defensive team is to prevent batters from becoming runners, and to prevent runners' advance around the bases. A run is scored when a runner legally advances around the bases in order and touches home plate.

<span class="mw-page-title-main">Softball</span> Team ball sport

Softball is a sport similar to baseball, and it is played with a larger ball on a smaller field and with only underhand pitches permitted. Softball is played competitively at club levels, the college level, and the professional level. The game was first created in 1887 in Chicago by George Hancock.

<span class="mw-page-title-main">Bunt (baseball)</span> Batting technique in baseball or fastpitch softball

A bunt is a batting technique in baseball or fastpitch softball. Official Baseball Rules define a bunt as follows: "A BUNT is a batted ball not swung at, but intentionally met with the bat and tapped slowly within the infield." To bunt, the batter loosely holds the bat in front of home plate and intentionally taps the ball into play. A properly executed bunt will create weak contact with the ball and/or strategically direct it, forcing the infielders to make a difficult defensive play to record an out.

<span class="mw-page-title-main">Error (baseball)</span> Baseball statistic

In baseball and softball statistics, an error is an act, in the judgment of the official scorer, of a fielder misplaying a ball in a manner that allows a batter or baserunner to advance one or more bases or allows a plate appearance to continue after the batter should have been put out. The term error is sometimes used to refer to the play during which an error was committed.

<span class="mw-page-title-main">Official scorer</span> Person who records the official record of events in a baseball game

In the game of baseball, the official scorer is a person appointed by the league to record the events on the field, and to send the official scoring record of the game back to the league offices. In addition to recording the events on the field such as the outcome of each plate appearance and the circumstances of any baserunner's advance around the bases, the official scorer is also charged with making judgment calls that do not affect the progress or outcome of the game. Judgment calls are primarily made about errors, unearned runs, fielder's choice, the value of hits in certain situations, and wild pitches, all of which are included in the record compiled. This record is used to compile statistics for each player and team. A box score is a summary of the official scorer's game record.

<span class="mw-page-title-main">Out (baseball)</span> In baseball, when the umpire rules a batter or baserunner out

In baseball, an out occurs when the umpire rules a batter or baserunner out. When a batter or runner is out, they lose their ability to score a run and must return to the dugout until their next turn at bat. When three outs are recorded in a half-inning, the batting team's turn expires.

<span class="mw-page-title-main">Batting order (baseball)</span> Sequence in which the members of the offense bat against the pitcher

In baseball, the batting order or batting lineup is the sequence in which the members of the offense take their turns in batting against the pitcher. The batting order is the main component of a team's offensive strategy. In Major League Baseball, the batting order is set by the manager, who before the game begins must present the home plate umpire with two copies of his team's lineup card, a card on which a team's starting batting order is recorded. The home plate umpire keeps one copy of the lineup card of each team, and gives the second copy to the opposing manager. Once the home plate umpire gives the lineup cards to the opposing managers, the batting lineup is final and a manager can make changes only under the Official Baseball Rules governing substitutions. If a team bats out of order, it is a violation of baseball's rules and subject to penalty.

<span class="mw-page-title-main">Baseball rules</span> Overview of the rules of baseball at different levels and in different countries

Throughout the history of baseball, the rules have frequently changed as the game continues to evolve. A few common rules most professional leagues have in common is that four balls is a base on balls, three strikes is a strikeout, and three outs end a half-inning.

Baseball and cricket are the best-known members of a family of related bat-and-ball games. Both have fields that are 400 feet (120 m) or more in diameter between their furthest endpoints, offensive players who can hit a thrown/"bowled" ball out of the field and run between safe areas to score runs (points) at the risk of being gotten out, and have a major game format lasting about 3 hours.

In baseball, interference occurs in situations in which a person illegally changes the course of play from what is expected. Interference might be committed by players on the offense, players not currently in the game, catchers, umpires, or spectators. Each type of interference is covered differently by the rules.

In sports, offense or offence, known as attack outside of North America, is the action of attacking or engaging an opposing team with the objective of scoring points or goals. The term may refer to the tactics involved in offense, or a sub-team whose primary responsibility is offense.

<span class="mw-page-title-main">Baseball scorekeeping</span> Recording of details of baseball games

Baseball scorekeeping is the practice of recording the details of a baseball game as it unfolds. Professional baseball leagues hire official scorers to keep an official record of each game, but many fans keep score as well for their own enjoyment. Scorekeeping is usually done on a printed scorecard and, while official scorers must adhere precisely to one of the few different scorekeeping notations, most fans exercise some amount of creativity and adopt their own symbols and styles.

<span class="mw-page-title-main">Small ball (baseball)</span> Baseball offensive strategy

In the sport of baseball, small ball is an informal term for an offensive strategy in which the batting team emphasizes placing runners on base and then advancing them into scoring position for a run in a deliberate, methodical way. This strategy places a high value on individual runs and attempts to score them without requiring extra base hits, or sometimes without base hits at all, instead using bases on balls, stolen bases, sacrifice bunt or sacrifice fly balls, the hit-and-run play, and aggressive baserunning with such plays as the contact play. A commonly used term for a run produced playing small ball is a "manufactured run". This style of play was more often found in National League game situations than in the American League due in large part to the absence of the designated hitter in the National League until the universal adoption of the Designated Hitter.

<span class="mw-page-title-main">Bat-and-ball games</span> Field games played by two opposing teams

Bat-and-ball games are field games played by two opposing teams. Action starts when the defending team throws a ball at a dedicated player of the attacking team, who tries to hit it with a bat and run between various safe areas in the field to score runs (points). The defending team can use the ball in various ways against the attacking team's players to force them off the field when they are not in safe zones, and thus prevent them from further scoring. The best known modern bat-and-ball games are cricket and baseball, with common roots in the 18th-century games played in England.

This is an alphabetical list of selected unofficial and specialized terms, phrases, and other jargon used in baseball, along with their definitions, including illustrative examples for many entries.

The wheel play is a defensive strategy in baseball designed to defend against a sacrifice bunt. The play's name derives from the wheel-like rotation of the infielders.

References

  1. ↑ "MLB.com Statistics".
  2. ↑ "Active Leaders &Records for Sacrifice Hits | Baseball-Reference.com". Baseball-Reference.com. Retrieved 2018-03-06.
  3. ↑ By the Numbers: Bunting in baseball can be downright medieval | The Columbian
  4. ↑ The Baseball Analysts: Empirical Analysis of Bunting
  5. ↑ Why Do Baseball Players Still Bunt So Damn Much?
  6. ↑ Tango, Tom M., Mitchel G. Lichtman, and Andrew E. Dolphin. The Book: Playing the Percentages in Baseball. Washington, D.C.: Potomac, 2007. Print.
  7. ↑ "Taking One for the Team: When Does it Make Sense to Sacrifice?, Part 3". 14 May 2004.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.