Great Bardfield Mill | |
---|---|
![]() The mill in April 2006 | |
![]() | |
Origin | |
Mill name | Gibraltar Mill |
Mill location | TL 68004 30727 |
Coordinates | 51°56′59″N0°26′35″E / 51.94966°N 0.44319°E |
Operator(s) | Private |
Year built | c1704 |
Information | |
Purpose | Corn mill |
Type | Tower mill |
Storeys | Three storeys |
No. of sails | Four sails |
Type of sails | Double Patent sails |
Windshaft | Cast iron |
Winding | Fantail |
Fantail blades | Eight blades |
No. of pairs of millstones | Two pairs |
Gibraltar Mill is a grade II listed [1] Tower mill at Great Bardfield, Essex, England which has been converted to residential use.
The first date at which a windmill is definitely known to have been standing here is 1707. A date of 1680 is given by some sources, but no mill was marked on Ogilby and Morgan's map of 1678. It cannot be proved or disproved that a mill was standing here in 1680. The most likely date of erection of Gibraltar Mill is 1704. A possible scenario being an earlier mill having been blown down in the Great Storm of 1703 and the present mill replacing it. By 1754, the mill had been converted to a cottage. The mill was put back to work as a windmill by 1806, when it was insured for £300, having only been insured for £50 in 1800. The mill was worked in conjunction with the nearby Great Bardfield Watermill at various times. A new cast iron windshaft was fitted in 1877, replacing the former wooden one. It was cast by Christy and Norris, millwrights of Chelmsford and fitted by Sillitoe and Brewer, millwrights of Long Melford, Suffolk. In January 1899, the sails were blown off and the cap severely damaged when the mill was tailwinded. The mill stood capless until 1904, when a new cap and sails were fitted, and a fantail added to replace the former internal winch winding system. The mill was working until 1930 [2] It was threatened with demolition in 1938, but Essex County Council used their powers under the Town and Country Planning Act, 1932 to prevent demolition. [2] After the death of the last miller in the late 1950s it was stripped of machinery and house converted. [2] One of the sails was damaged in the Great Storm of 1987. [3]
Gibraltar Mill is an underpowered three-storey tower mill with a boat-shaped cap. The mill has four double Patent sails carried on a cast-iron windshaft and is winded by an eight-bladed fantail. The tower is 3 feet 6 inches (1.07 m) to 4 feet (1.22 m) thick at base level. It is 32 feet (9.75 m) high, 20 feet (6.10 m) diameter at base level and 13 feet (3.96 m) diameter at curb level. The mill is 44 feet (13.41 m) high overall. The windshaft carries a wooden Brake Wheel with 90 iron teeth, cast in six segments. The Wallower was an iron mortice gear, with 44 wooden cogs. It was carried on a cast-iron Upright Shaft. The Great Spur Wheel had 88 cogs, and drove two pairs of millstones via Stone Nuts with 18 cogs each. [2]
References for above:- [2]
Upminster Windmill is a Grade II* listed smock mill located in Upminster in the London Borough of Havering, England. It was formerly known as Abraham's Mill and was in Essex when built. It has been restored and is a museum open to the public at selected times.
Outwood Windmill is a Grade I listed post mill in Outwood, Surrey. Built in 1665 by Thomas Budgen, a miller from Nutfield in Surrey, it is Britain's oldest working windmill.
John Webb’s or Lowe’s Mill is a Grade II* listed tower mill at Thaxted, Essex, England, which had been restored to working order, but is currently out of action following the loss of a sail in April 2010.
Shirley Windmill is a Grade II listed tower mill in Shirley, in the London Borough of Croydon, England which has been restored to working order.
Aythorpe Roding Windmill is a Grade II* listed Post mill at Aythorpe Roding, Essex, England which has been restored to working order.
Duck End Mill, Letch's Mill or Finchingfield Post Mill is a grade II listed Post mill at Finchingfield, Essex, England which has been restored.
Fryerning Mill is a grade II* listed post mill at Mill Green, Fryerning, Essex, which has been restored.
Mountnessing Windmill is a grade II* listed post mill at Mountnessing, Essex, England. Built in 1807, it was most recently restored to working order in 1983.
Ramsey Windmill is a grade II* listed post mill at Ramsey, Essex, England which has been restored.
Baker Street Mill is a grade II listed smock mill at Baker Street, Orsett, Essex, England which has been part adapted to residential use on its lower two floors only.
Terling Windmill is a grade II listed Smock mill at Terling, Essex, England, which has been converted to residential use.
South Ockendon Windmill was a Smock mill at South Ockendon, Essex, England which collapsed on 2 November 1977.
Debden Windmill is a grade II listed Tower mill at Debden, Essex, England which has been converted to residential use.
Church End Mill is a grade II listed Tower mill at Great Dunmow, Essex, England which has been converted to residential use.
Rayleigh Windmill is a grade II listed Tower mill at Rayleigh, Essex, England which has been restored as a landmark and is used as a museum.
Stansted Mountfitchet Windmill is a grade II* listed Tower mill at Stansted Mountfitchet, Essex, England which is also a Scheduled Ancient Monument. It has been restored and can turn by wind.
Stock Windmill is a grade II* listed tower mill at Stock, Essex, which has been restored.
Messing Maypole Mill is a grade II listed Tower mill at Tiptree, Essex, England which has been converted to a residence. Prior to boundary changes made when the civil parish of Tiptree was established in 1934, the mill was in the parish of Tolleshunt Knights.
Gainsford End Mill is a grade II listed tower mill at Gainsford End, near Toppesfield, Essex, England, which has been converted to a residence.
White Roding Windmill is a Grade II listed preserved tower mill at White Roding, Essex, England.