Rayleigh Mill | |
---|---|
Origin | |
Mill name | Rayleigh Mill |
Mill location | TQ 807 910 |
Coordinates | 51°35′17″N0°36′25″E / 51.588°N 0.607°E |
Operator(s) | Rochford District Council |
Year built | 1809 |
Information | |
Purpose | Corn mill |
Type | Tower mill |
Storeys | Six storeys |
No. of sails | Four sails |
Type of sails | Two Spring sails and two Common sails |
Windshaft | Cast iron |
Winding | Fantail |
Fantail blades | Six blades |
Auxiliary power | steam engine, then an oil engine, then an electric motor |
No. of pairs of millstones | Three pairs |
Rayleigh Windmill is a grade II listed [1] Tower mill at Rayleigh, Essex, England which has been restored as a landmark and is used as a museum.
Rayleigh Windmill was built in 1809 for Thomas Higgs, a timber merchant of Rayleigh. Higgs was bankrupt in 1815 and the mill was sold to William Hart of Woodham Mortimer in 1817. Hart sold the mill to George Britton in 1845 and the mill passed to his sons John and Samuel in 1869. £150 was spent putting the mill into repair. The Britton brothers left Rayleigh in 1884 and were bankrupt in 1886. Thomas James Brown was the next miller, and the last to work the mill by wind c1907. The cap and sails were removed c1909 [2] and the mill was worked by a steam engine [3] then an oil engine and latterly by electric motor until at least 1937. [2]
The mill was taken over for use as a museum by Rayleigh and District Antiquarian and Natural History Society, formally opening on 16 May 1970. The capless mill stood for many years with a crenellated top but in 1972 Rayleigh Urban District Council launched an appeal to restore the mill as a landmark. By the autumn of 1974 a new cap and sails had been made and fitted by millwrights John Lawn and Philip Barrett-Lennard. [2]
In 2005, restoration work costing £340,000 was funded by the Thames Gateway South Essex Partnership. [4]
Rayleigh Windmill is a six-storey tower mill with a Kentish cap winded by a six-bladed fantail. The mill had two single Spring sails and two Common sails carried on a cast-iron windshaft. The tower has no batter until second-floor level, where the stage is. The tower is 20 feet (6.10 m) diameter at base level and 11 feet (3.35 m) internal diameter at the curb. The brickwork is 4 feet 6 inches (1.37 m) thick at base level and at curb level it is thickened out to 3 feet (910 mm). The mill is 60 feet (18.29 m) high to the top of the cap. The mill drove three pairs of millstones. [2]
References for above:- [2]
Rayleigh Windmill is open from April each year on Wednesdays, Saturdays and Sundays. [3]
Upminster Windmill is a Grade II* listed smock mill located in Upminster in the London Borough of Havering, England. It was formerly known as Abraham's Mill and was in Essex when built. It has been restored and is a museum open to the public at selected times.
John Webb’s or Lowe’s Mill is a Grade II* listed tower mill at Thaxted, Essex, England, which had been restored to working order, but is currently out of action following the loss of a sail in April 2010.
Shirley Windmill is a Grade II listed tower mill in Shirley, in the London Borough of Croydon, England which has been restored to working order.
Great Bircham Windmill is a Grade II listed tower mill in Great Bircham, Norfolk, England.
Caston Tower Windmill is a grade II* listed tower mill at Caston, Norfolk, England which is under restoration. The mill is also a scheduled monument.
Ovenden's Mill or Mockett's Mill is a grade II* listed tower mill at Polegate, East Sussex, England which has been restored but is now in a poor state and the tower is not open to the public. The impressive milling museum is open but only on certain Open Days. If you look at the "Polegate windmill" Facebook page you will find more details. We are arranging these days at the moment but the first one should be National Mills weekend with the mill open on the Sunday.
Baker Street Mill is a grade II listed smock mill at Baker Street, Orsett, Essex, England which has been part adapted to residential use on its lower two floors only.
Terling Windmill is a grade II listed Smock mill at Terling, Essex, England, which has been converted to residential use.
South Ockendon Windmill was a Smock mill at South Ockendon, Essex, England which collapsed on 2 November 1977.
Gibraltar Mill is a grade II listed Tower mill at Great Bardfield, Essex, England which has been converted to residential use.
Church End Mill is a grade II listed Tower mill at Great Dunmow, Essex, England which has been converted to residential use.
Stansted Mountfitchet Windmill is a grade II* listed Tower mill at Stansted Mountfitchet, Essex, England which is also a Scheduled Ancient Monument. It has been restored and can turn by wind.
Stock Windmill is a grade II* listed tower mill at Stock, Essex, which has been restored.
Messing Maypole Mill is a grade II listed Tower mill at Tiptree, Essex, England which has been converted to a residence. Prior to boundary changes made when the civil parish of Tiptree was established in 1934, the mill was in the parish of Tolleshunt Knights.
Gainsford End Mill is a grade II listed tower mill at Gainsford End, near Toppesfield, Essex, England, which has been converted to a residence.
White Roding Windmill is a Grade II listed preserved tower mill at White Roding, Essex, England.
Burgh Mill is a Grade II listed tower mill at Burgh, Suffolk, England which has been converted to residential accommodation.
Buxhall Mill is a tower mill at Buxhall, Suffolk, England which has been converted to residential accommodation.
Buttrum's Mill or Trott's Mill is a Grade II* listed tower mill at Woodbridge, Suffolk, England, which has been restored to working order.
Lannock Mill is a Grade II listed tower mill at Weston, Hertfordshire, England which is derelict.