HMS Pylades (1854)

Last updated

HMS Pylades in a Squall - ILN 1869.jpg
Pylades at sea on 12 October 1869
History
Naval Ensign of the United Kingdom.svgUnited Kingdom
NameHMS Pylades
Namesake Pylades
Builder Sheerness Dockyard
Laid down9 May 1853
Launched23 November 1854
Completed29 March 1855
Commissioned5 January 1855
Out of service31 December 1873
FateSold to be broken up 23 January 1875
Class overview
NamePylades class
Preceded by Highflyer class
Succeeded by Cossack class
General characteristics (as built)
Class and typePylades-class corvette
Displacement1,956 long tons (1,987  t)
Tons burthen1,267 bm
Length
  • 192 ft 9 in (58.75 m) o/a
  • 165 ft 0.5 in (50.30 m) pp
Beam38 ft 4 in (11.68 m)
Draught19 ft 7 in (5.97 m)
Installed power1,106  ihp (825 kW)
Propulsion
Sail plan Full-rigged ship
Speed10.119  kn (19 km/h; 12 mph)
Complement250
Armament

HMS Pylades was the sole member of the Pylades-class of first-class screw corvettes that served in the Victorian Royal Navy. Pylades was a development of the previous Highflyer class with a greater beam. The vessel served under two commanders who later became admirals, Captains Arthur Acland Hood and Edwin Tennyson d'Eyncourt. A third commander was Captain Michael de Courcy, remembered in the name of De Courcy Island, one of the Gulf Islands off the coast of British Columbia along with Pylades Island, which is named for the corvette. In 1855, Pylades served in the Baltic Sea during the Crimean War. In 1859, the vessel was the last Royal Navy warship to visit the San Juan Islands during the San Juan Boundary Dispute. In 1863, the ship's presence helped diffuse the Chesapeake affair that could have led to the British Empire joining the American Civil War. After serving across the British Empire, the ship was decommissioned and sold to be broken up in 1875.

Contents

Design and development

In May 1850, the Surveyor of the Navy Baldwin Walker was managing the transition from sail to steam across the navy at the time of budget constraints. The first fifth-rate screw frigates had just been ordered, the Highflyer class, which would be later rerated as first-class corvettes. A follow-on order of four frigates of 1,500 bm was made. However, this was amended to one frigate, Aurora, and the remaining three vessels were downgraded to smaller corvettes. [1] One these was Pylades, originally ordered on 24 December 1852 as an additional Highflyer. The design was revised before being laid down, with a wider beam, and the new vessel became the sole member of the Pylades class. [2]

The corvette had an overall length of 192 ft 9 in (58.75 m) and a length between perpendiculars of 165 ft 0.5 in (50.30 m), with a beam of 38 ft 4 in (11.68 m) and design draught of 19 ft 7 in (5.97 m). Design displacement was 1,956 long tons (1,987 t) and 1,268 bm although the vessel was 1,267 bm as completed. The ship was equipped with a horizontal single expansion marine steam engine built by John Penn and Sons that had two cylinders, each with 55 in (1.4 m) bore and 5 ft (1.5 m) stroke. Rated at 350 horsepower (260  kW ) and 1,106 indicated horsepower (825 kW), the engine drove a single shaft, to give a design speed of 10.119 knots (19  km/h ; 12  mph ). [2] The screw had two blades, which caused the stern to oscillate while under steam. The engine was complemented by a ship-rig. Under sail, the vessel could attain 7 knots (13 km/h; 8.1 mph). [3]

At launch, Pylades carried a heavier armament than any other corvette in the navy at the time. [4] The main weapons consisted of twenty 8 in (200 mm) 42 cwt [Note 1] 32-pounder smooth bore muzzle loading (SBML) guns mounted on broadside trucks. Ten were mounted to each side. A single 10 in (250 mm) 95 cwt 68-pounder SBML pivot gun was mounted on the deck. [2] Although installed at the bow, the pivot gun was flexible, being designed to be mounted both at the bow and stern and to fire both shells and shot. [4] The ship had a complement of 250 officers and ratings. [2]

Construction and career

Laid down at Sheerness Dockyard on 9 May 1853, Pylades was named on 8 June and launched on 23 November the following year. The vessel cost £68,333, including £21,684 for machinery. The warship was commissioned on 5 January 1855 under the command of Captain, later Admiral, Edwin Tennyson d'Eyncourt and completed on 29 March. [2] The ship was the fourth to be given the name in Royal Navy service, which recalled the Greek prince Pylades. [5] The vessel's first voyage was to the Nore and then to the Baltic Sea along with the sloop Volcano and a flotilla of gunboats on 11 May 1855. [6] The vessel served as part of a blockade of Russian ports undertaken by the French and British forces during the Crimean War. Attempts were also made to attack Russian forts such as Fort Alexander, but the defences were too strong and these proved ineffective. [7] The vessel did not serve in the conflict long and returned to Portsmouth for repairs, which were completed on 5 June the following year. [8] The corvette then sailed across the Atlantic Ocean to Halifax, Nova Scotia, returning on 27 October. The voyage had not been without peril and the vessel had been feared lost after disappearing 18 days beforehand. [9]

After being paid off on 18 November and repaired, Pylades was recommissioned on 16 July 1857 under Captain Michael de Courcy. The vessel recrossed the Atlantic Ocean to serve with the North America and West Indies Station before joining the East Indies and China Station and finally the Pacific Station. [2] The corvette served at the Royal Navy base in Singapore until deployed to Canada, arriving on 18 February 1858. [10] Although initially sent to help handle the Fraser Canyon Gold Rush, the vessel's presence also proved useful during the San Juan Boundary Dispute during the following year. [11] On 7 December, Pylades was the last Royal Navy warship to be deployed to the San Juan Islands, after which the risk of conflict de-escalated. [12] At the end of the service, the corvette sailed to Chatham to be decommissioned on 20 July 1861. [2] An extensive refit was carried out, with much of the copper and wooden hull replaced, the decks removed and the boilers repaired. [13] A new armament was fitted, with the main deck equipped with sixteen cast iron 8 in (200 mm) 60 cwt guns each 8 ft 10 in (2.69 m) long and four Armstrong 4.75 in (121 mm) 40-pounder 28 cwt guns. On the upper deck, a single Armstrong 7 in (180 mm) 110-pounder 82 cwt gun was mounted. [14] The ship was equipped with a new 15 ft 9 in (4.80 m) screw and, while undertaking trials on 31 December, achieved a speed of 10.373 knots (19.211 km/h; 11.937 mph). [15]

The ship, now rated at 1,278 bm, departed for the North America and West Indies Station on 13 January 1863 under the command of Captain, later Admiral, Arthur Acland Hood. [16] While serving in Canada, the vessel played a role in the Chesapeake affair that took place during the American Civil War. When the British sailing vessel Chesapeake, captured by Confederate sympathisers and pursued by US Navy warships, arrived in Canadian waters, the vessel's presence helped stop the situation escalating to a declaration of war between the British Empire and Union forces. [17] By this time, the corvette was old and was deemed unlikely to last beyond 1868. [18] The vessel returned to the Nore on 29 October 1866 for an extensive overhaul, which extended the ship's life substantially. [19] Recommissioned on 4 December 1867 the vessel served under the command of Captain Cecil Buckley, later a recipient of the Victoria Cross, as part of the Pacific Station until 1870 and then off the coast of South America between 20 July 1871 and 20 August 1873 under the command of Captain Augustus Chetham Strode. The ship was finally decommissioned on 31 December at Sheerness. Pylades was sold to be broken up on 23 January 1875 to Castle in Charlton. [2] [20]

Legacy

Pylades is recalled in the name of Pylades Island, one of the Gulf Islands off the coast of British Columbia. This is not the only local name related to the vessel. Nearby De Courcy Island is named for Michael de Courcy. [21] The other islands of the De Courcy Group, Mudge and Ruxton Islands also recall sailors connected with the corvette, both named William. [22] Similarly, Buckley Point, south of the mouth of the Skeena River, and Cecil Point north of Pitt Island are named after Cecil Buckley, who commanded Pylades off the coast of British Columbia between 1868 and 1869. [23]

Related Research Articles

<span class="mw-page-title-main">Sloop-of-war</span> Type of warship

In the 18th century and most of the 19th, a sloop-of-war in the Royal Navy was a warship with a single gun deck that carried up to eighteen guns. The rating system covered all vessels with 20 guns and above; thus, the term sloop-of-war encompassed all the unrated combat vessels, including the very small gun-brigs and cutters. In technical terms, even the more specialised bomb vessels and fireships were classed as sloops-of-war, and in practice these were employed in the sloop role when not carrying out their specialised functions.

<span class="mw-page-title-main">Steam frigate</span> Type of steam-powered warship

Steam frigates and the smaller steam corvettes, steam sloops, steam gunboats and steam schooners, were steam-powered warships that were not meant to stand in the line of battle. There were some exceptions like for example the French Napoléon class steam ship of the line was meant to stand in the line of battle, making it the world's first steam battleship. The first such ships were paddle steamers. Later on the invention of screw propulsion enabled construction of steam-powered versions of the traditional ships of the line, frigates, corvettes, sloops and gunboats.

HMS <i>Plumper</i> (1848) Sloop of the Royal Navy

HMS Plumper was part of the 1847 programme, she was ordered on the 25 of April as a steam schooner from Woolwich Dockyard with the name Pincher. However, the reference Ships of the Royal Navy, by J.J. College, (c) 2020 there is no entry that associates this name to this build. The vessel was reordered on August 12 as an 8-gun sloop as designed by John Fincham, Master Shipwright at Portsmouth. Launched in 1848, she served three commissions, firstly on the West Indies and North American Station, then on the West Africa Station and finally in the Pacific Station. It was during her last commission as a survey ship that she left her most enduring legacy; in charting the west coast of British Columbia she left her name and those of her ship's company scattered across the charts of the region. She paid off for the last time in 1861 and was finally sold for breaking up in 1865.

HMS <i>Fantome</i> (1810)

HMS Fantome was an 18-gun brig-sloop of the Royal Navy. She was originally a French privateer brig named Fantôme, which the British captured in 1810 and commissioned into British service. Fantome saw extensive action in the War of 1812 until she was lost in a shipwreck at Prospect, Nova Scotia, near Halifax in 1814.

HMS <i>Rattler</i> (1843) Sloop of the Royal Navy

HMS Rattler was a 9-gun steam screw sloop of the Royal Navy, and one of the first British warships to be completed with screw propulsion. She was originally ordered as a paddle wheel 4-gun steam vessel from Sheerness Dockyard on 12 March 1841. She was reordered on 24 February 1842 as a propeller type 9-gun sloop from HM Royal Dockyard, Sheerness, as a new vessel. William Symonds had redesigned the ship as a screw propeller driven vessel.

HMS <i>Miranda</i> (1851) Sloop of the Royal Navy

HMS Miranda was a 14-gun wooden screw sloop of the Royal Navy. As part of the 1847 Program, she was designed by John Fincham, Master Shipwright of Portsmouth ,and is considered an improved Rattler, with the design approved on 3 November 1847. She was ordered on 25 April 1847 with the name Grinder from Royal Dockyard, Sheerness. On 3 November 1847, she was reordered as Miranda from Sheerness Dockyard. Launched in 1851, she was completed to see action in the Crimean War. In 1854 she was in the White Sea and participated in the bombardment of the Port of Kola. She then served in the Sea of Azov during 1855. Two of her crew were awarded the Victoria Cross for their bravery. Towards the end of her career she transported troops during the New Zealand Wars. She was reclassified as a corvette by 1862. She was sold for breaking in December 1869.

HMS <i>Highflyer</i> (1898) Cruiser of the Royal Navy

HMS Highflyer was the lead ship of the Highflyer-class protected cruisers built for the Royal Navy in the 1890s. She spent her early career as flagship for the East Indies and North America and West Indies Stations. She was reduced to reserve in 1908 before again becoming the flagship in the East Indies in 1911. She returned home two years later and became a training ship. When World War I began in August 1914, she was assigned to the 9th Cruiser Squadron in the Central Atlantic to intercept German commerce raiders and protect Allied shipping.

HMS <i>Eagle</i> (1679) Ship of the line of the Royal Navy

HMS Eagle was a 70-gun third rate ship of the line of the Royal Navy, built at Portsmouth Dockyard during 1677/79. When completed she was placed in Ordinary for 10 years. She was in active commission during the War of the English Succession partaking in the Battle of Barfleur. She was rebuilt in 1699 at Chatham. She again played an active role in the early part of the War of Spanish Succession participating in the Capture of Gibraltar, and the Battle of Velez Malaga. She was wrecked in the Isles of Scilly in October 1707.

HMS <i>Calliope</i> (1884) Calypso-class corvette

HMS Calliope was a Calypso-class corvette of the Royal Navy of the United Kingdom which served from 1887 until 1951. Exemplifying the transitional nature of the late Victorian navy, Calliope was a sailing corvette—the last such ship built for the Royal Navy—but supplemented the full sail rig with a powerful engine. Steel was used for the hull, and like the earlier iron-hulled corvettes, Calliope was cased with timber and coppered below the waterline, in the same manner as wooden ships.

HMS <i>Thetis</i> (1846) Frigate of the Royal Navy

HMS Thetis was a 36-gun fifth-rate frigate of the Royal Navy. After nearly a decade of service with the British, she was transferred to Prussia in exchange for two steam gunboats. She served with the Prussian Navy, the North German Federal Navy and the Imperial German Navy as a training ship until being stricken in 1871. Thetis was subsequently converted into a coal hulk and broken up in 1894–95.

HMS <i>Niger</i> (1846) Sloop of the Royal Navy

HMS Niger was originally slated to be built as a Sampson designed sloop; however, she was ordered as a First-Class sloop with screw propulsion on 20 February 1845 to be built at Woolwich Dockyard, along the design developed by Oliver Lang and with a hull like the Basilisk designed paddle sloops. Her armament and engine were to be like the Encounter Design building at Pembroke. A second vessel (Florentia) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 6 October 1846 then cancelled three years later, on 22 May 1849. Niger She conducted important propulsion trials, finally proving the superiority of screw propulsion and served in West Africa, the Crimea, China, the East Indies and Australia. She took part in the New Zealand wars in 1860 and was sold for breaking in 1869.

HMS <i>Brisk</i> (1851)

HMS Brisk was a 14-gun wooden-hulled screw sloop designed by the Committee of Reference as part of the 1847 program. She is considered an enlarged Rattler with the design approved in 1847. She was ordered on 25 April 1847 from Woolwich Dockyard as a 10-gun sloop, but the guns were later increased due to the Russian War, to 14 guns by increasing the number of 32-pounder guns. She was launched on 2 June 1851 from Woolwich Dockyard. She served in the Russian War of 1854- 55 and as part of the Southern African anti-slavery patrol, with a final commission on the Australian Station. She was sold in 1870 for use in an pioneer, but unsuccessful, telegraph service.

HMS <i>Comus</i> (1878)

HMS Comus was a corvette of the Royal Navy. She was the name ship of her class. Launched in April 1878, the vessel was built by Messrs. J. Elder & Co of Glasgow at a cost of £123,000.

HMS <i>Pylades</i> (1884) Sloop of the Royal Navy

HMS Pylades was a Satellite-class composite screw sloop of the Royal Navy, built at Sheerness Dockyard and launched on 5 November 1884. She was later reclassified as a corvette and was the last corvette built for the Royal Navy until the Second World War.

HMS <i>Malacca</i> (1853) Sloop of the Royal Navy

HMS Malacca was a 17-gun wooden sloop of the Royal Navy. She was ordered on 9 November 1847 from Moulmein, Burma to be built of teak. As a Surveyor's Department design, Malacca was based on the Conflict designed sloop which was approved on 9 December 1848. After launching in April 1853 she was commissioned the following month to be sailed to England for the fitting of her engine. She entered British Naval service in 1854 and served three commissions including action in the Russian War 1854 - 55 before being sold in 1869. Her resale to Japan, she served in the Japanese Navy as a training ship until broken in 1906.

HMS <i>Encounter</i> (1846) Sloop of the Royal Navy

HMS Encounter was ordered as a First-Class Sloop with screw propulsion on 5 February 1845 to be built at Pembroke, in accordance with the design developed by John Fincham, Master Shipwright at Portsmouth. Her armament was to consist of 8 guns. She was to have a more powerful steam engine rated at 360 nominal horsepower. In 1848 she would be altered abaft and lengthened at Deptford prior to completion. A second vessel (Harrier) was ordered on 26 March 1846 but after her keel was laid at Pembroke Dockyard, her construction was suspended on 9 September 1846 then cancelled five years later, on 4 April 1851. Encounter had her armament radically altered in 1850 and she was broken up at Devonport in 1866.

<i>Evertsen</i>-class frigate Dutch class of steam frigates

The Evertsen class was a class of steam frigates of the Royal Netherlands Navy. The class comprised Evertsen and Zeeland

HMS <i>Leander</i> (1848) Sailing frigate of the Royal Navy

HMS Leander was a 50-gun frigate of the Royal Navy which saw service in the Crimean War.

HMS <i>Ruby</i> (1876) British Emerald-class corvette

HMS Ruby was an Emerald-class composite screw corvette that served in the Victorian Royal Navy. The Emerald class was a development of the wooden Amethyst class but combined an iron frame and teak cladding. Launched in 1876, Ruby was commissioned to the East Indies Station, serving between Burma, Ceylon, Madras and other important parts of the British Empire. Transferred to operating in the Mediterranean Sea, the vessel supported humanitarian efforts during the 1878 Macedonian rebellion and then the British forces during the Anglo-Egyptian War of 1882. The corvette served in the South East Coast of America Station from 1885, retiring in 1904. After a period as a coal hulk with the name C.10, Ruby was sold in 1921 to be broken up.

HMS <i>Tourmaline</i> (1875) British Emerald-class corvette

HMS Tourmaline was a Emerald-class composite screw corvette that served in the Victorian Royal Navy. The Emerald class was a development of the wooden Amethyst class but combined an iron frame and teak cladding. Launched in 1875, Tourmaline was deployed to the North America and West Indies Station in 1878. The ship joined the third flying squadron in 1880, sailing to South Africa at time of the First Boer War and then to Australia, Japan, Singapore and Egypt, arriving in Alexandria in time to participate in the Anglo-Egyptian War. During 1883, the corvette was stationed in Zanzibar and then, in response to the Franco-Hova Wars, was the senior officer's ship in Madagascar. Following an armament upgrade, the vessel returned to the North America and West Indies Station in 1886. Converted to a coal hulk in 1899, Tourmaline was sold in 1920 to be broken up.

References

Notes

  1. ↑ "Cwt" is the abbreviation for hundredweight, 42 cwt referring to the weight of the gun.

Citations

  1. ↑ Friedman 2012, p. 65.
  2. 1 2 3 4 5 6 7 8 Winfield 2014, p. 190.
  3. ↑ Humble 1976, p. 156.
  4. 1 2 "Naval And Military Intelligence". The Times . No. 21749. 24 May 1854. p. 12.
  5. ↑ Manning & Walker 1959, p. 357.
  6. ↑ "Naval And Military Intelligence". The Times. No. 22052. 12 May 1855. p. 5.
  7. ↑ "The Baltic Fleet". The Times. No. 22150. 4 September 1855. p. 7.
  8. ↑ "Naval And Military Intelligence". The Times. No. 22387. 6 June 1856. p. 12.
  9. ↑ "Naval And Military Intelligence". The Times. No. 22509. 27 October 1856. p. 10.
  10. ↑ Gough 1971, p. 144.
  11. ↑ Gough 1971, p. 145.
  12. ↑ Gough 1971, p. 165.
  13. ↑ "Naval And Military Intelligence". The Times. No. 24143. 15 January 1862. p. 12.
  14. ↑ "Naval And Military Intelligence". The Times. No. 24372. 9 October 1862. p. 9.
  15. ↑ "Naval And Military Intelligence". The Times. No. 24444. 1 January 1863. p. 11.
  16. ↑ "Naval And Military Intelligence". The Times. No. 24455. 14 January 1863. p. 12.
  17. ↑ Morton 1964, p. 137.
  18. ↑ Friedman 2012, p. 79.
  19. ↑ "Naval And Military Intelligence". The Times. No. 25642. 30 October 1866. p. 10.
  20. ↑ Colledge & Warlow 2006, p. 281.
  21. ↑ Scott 2009, p. 154.
  22. ↑ Scott 2009, pp. 412, 515.
  23. ↑ Scott 2009, pp. 92, 113.

Sources

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.