ICES Statistical Rectangles

Last updated
ICES Statistical Rectangles
Organisation International Council for the Exploration of the Sea
No. issued11,187 (standard resolution rectangles), 100,683 (sub-rectangles)
No. of digits4 (standard resolution rectangle), 5 (sub-rectangle)
Example37F3 (standard resolution rectangle), 37F31 (sub-rectangle)
Website www.ices.dk/data/maps/Pages/ICES-statistical-rectangles.aspx

ICES Statistical Rectangles (aka "ICES Rectangles") is a gridded, latitude-longitude based area notation system covering the north-east Atlantic region developed by the International Council for the Exploration of the Sea (ICES) in the 1970s, for simplified analysis and visualization of spatial data of relevance to that organization's interests. [1] The individual rectangles that make up the system each measure 1 degree of longitude by 0.5 degrees of latitude and are intended to be roughly square in real world use in the ICES region of interest, approximately 30 nautical miles by 30 nautical miles (55×55 km) at 60°N, although the actual width varies with latitude, gradually becoming wider than they are high south of 60°N, and narrower further north. The grid covers the region from 36°N to 85°30'N and from 44°W to 69°E (quoted as 68°30') using a set of alphanumeric identifiers, with row of latitude (identifiers 01 through 99, from south to north) cited first, then column of longitude (identifiers A0-A3, then B0-B9, C0-C9 etc., from west to east). The last used column identifier is M8; column identifiers A4-A9, and prefix "I" (uppercase "i") i.e. columns "I"0-"I"9 are not used. The resulting grid is 113 columns by 99 rows, comprising 11,187 labelled 1×0.5 degree cells. An example cell designation is 37F3, which designates the 1×0.5 degree rectangle of which the south-west corner is 54°00'N, 03°00'E. [2] [3] The grid covers both land and sea areas across its designated region, but as per the interests of its originating body, is typically employed for use with marine data such as analysis of marine resources, fishing activities, seabed habitat, etc., refer example references below. The full extent of the grid is visible in published figures such as Figs. 5-8 in Williamson et al., 2017. [4]

Contents

To accommodate the visualization and/or analysis of finer scale data than is supported by the "standard" (1×0.5 degree) rectangles, an optional fifth character (as digits 1 through 9) can be used which will place a location within a finer 9-cell (3 by 3) sub-grid, for which the individual sub-rectangles then measure 20' of longitude by 10' of latitude (approximately 10×10 nautical miles). Sub-rectangle designations go north to south, then west to east, with 1 at the north west corner and 9 at the south east. [2]

ICES rectangles have been used for reporting and analysis in numerous marine publications since the 1970s; for recent examples see. [5] [6] [7] A vector polygon representation of the ICES Statistical Rectangles is available here.

See also

Related Research Articles

A nautical mile is a unit of length used in air, marine, and space navigation, and for the definition of territorial waters. Historically, it was defined as the meridian arc length corresponding to one minute of latitude at the equator, such that Earth's polar circumference is very near to 21,600 nautical miles. Today the international nautical mile is defined as 1,852 metres. The derived unit of speed is the knot, one nautical mile per hour.

<span class="mw-page-title-main">Geographic coordinate system</span> System to specify locations on Earth

The geographic coordinate system (GCS) is a spherical or geodetic coordinate system for measuring and communicating positions directly on the Earth as latitude and longitude. It is the simplest, oldest and most widely used of the various spatial reference systems that are in use, and forms the basis for most others. Although latitude and longitude form a coordinate tuple like a cartesian coordinate system, the geographic coordinate system is not cartesian because the measurements are angles and are not on a planar surface.

<span class="mw-page-title-main">Projected coordinate system</span> Cartesian geographic coordinate system

A projected coordinate system – also called a projected coordinate reference system, planar coordinate system, or grid reference system – is a type of spatial reference system that represents locations on Earth using Cartesian coordinates (x, y) on a planar surface created by a particular map projection. Each projected coordinate system, such as "Universal Transverse Mercator WGS 84 Zone 26N," is defined by a choice of map projection (with specific parameters), a choice of geodetic datum to bind the coordinate system to real locations on the earth, an origin point, and a choice of unit of measure. Hundreds of projected coordinate systems have been specified for various purposes in various regions.

The International Council for the Exploration of the Sea is a regional fishery advisory body and the world's oldest intergovernmental science organization. ICES is headquartered in Copenhagen, Denmark, where its multinational secretariat staff of 51 provide scientific, administrative and secretarial support to the ICES community. It was established on July 22, 1902, in Copenhagen.

A geocode is a code that represents a geographic entity. It is a unique identifier of the entity, to distinguish it from others in a finite set of geographic entities. In general the geocode is a human-readable and short identifier.

The Natural Area Code, or Universal Address, is a proprietary geocode system for identifying an area anywhere on the Earth, or a volume of space anywhere around the Earth. The use of thirty alphanumeric characters instead of only ten digits makes a NAC shorter than its numerical latitude/longitude equivalent.

The National Topographic System or NTS is the system used by Natural Resources Canada for providing general purpose topographic maps of the country. NTS maps are available in a variety of scales, the standard being 1:50,000 and 1:250,000 scales. The maps provide details on landforms and terrain, lakes and rivers, forested areas, administrative zones, populated areas, roads and railways, as well as other human-made features. These maps are currently used by all levels of government and industry for forest fire and flood control, depiction of crop areas, right-of-way, real estate planning, development of natural resources and highway planning. To add context, land area outside Canada is depicted on the 1:250,000 maps, but not on the 1:50,000 maps.

<span class="mw-page-title-main">ISO 6709</span> International standard for representation of geographic location

ISO 6709, Standard representation of geographic point location by coordinates, is the international standard for representation of latitude, longitude and altitude for geographic point locations.

Address geocoding, or simply geocoding, is the process of taking a text-based description of a location, such as an address or the name of a place, and returning geographic coordinates, frequently latitude/longitude pair, to identify a location on the Earth's surface. Reverse geocoding, on the other hand, converts geographic coordinates to a description of a location, usually the name of a place or an addressable location. Geocoding relies on a computer representation of address points, the street / road network, together with postal and administrative boundaries.

QDGC - Quarter Degree Grid Cells are a way of dividing the longitude latitude degree square cells into smaller squares, forming in effect a system of geocodes. Historically QDGC has been used in a lot of African atlases. Several African biodiversity projects uses QDGC, among which The atlas of Southern African Birds is the most prominent one. In 2009 a paper by Larsen et al. describes the QDGC standard in detail.

In geography, location or place are used to denote a region on Earth's surface. The term location generally implies a higher degree of certainty than place, the latter often indicating an entity with an ambiguous boundary, relying more on human or social attributes of place identity and sense of place than on geometry. A populated place is called a settlement.

<span class="mw-page-title-main">Marsden square</span> System dividing part of a world map into a grid of 10°×10° cells

Marsden square mapping or Marsden squares is a system that divides a world map with latitude-longitude gridlines between 80°N and 70°S latitudes into grid cells of 10° latitude by 10° longitude, each with a geocode, a unique numeric identifier. The method was devised by William Marsden, when first secretary of the British Admiralty, for collecting and combining geographically based information about the oceans.

The World Geographic Reference System (GEOREF) is a geocode, a grid-based method of specifying locations on the surface of the Earth. GEOREF is essentially based on the geographic system of latitude and longitude, but using a simpler and more flexible notation. GEOREF was used primarily in aeronautical charts for air navigation, particularly in military or inter-service applications, but it is rarely seen today. However, GEOREF can be used with any map or chart that has latitude and longitude printed on it.

World Meteorological Organization (WMO) squares is a system of geocodes that divides a world map with latitude-longitude gridlines into grid cells of 10° latitude by 10° longitude, each with a unique, 4-digit numeric identifier. On the plate carrée projection, the grid cells appear square; however, if the Mercator projection is used, the grid cells appear 'stretched' vertically nearer the tops and bottoms of the map. On the actual surface of the Globe, the cells are approximately "square" only adjacent to the Equator, and become progressively narrower and tapered as they approach the poles, and cells adjoining the poles are unique in possessing three faces rather than four.

C-squares is a system of spatially unique, location-based identifiers (geocodes) for areas on the surface of the earth, represented as cells from a latitude- and longitude-based Discrete Global Grid at a hierarchical set of resolution steps, obtained by progressively subdividing 10×10 degree World Meteorological Organization squares; the term "c-square" is also available for use to designate any component cell of the grid. Individual cell identifiers incorporate literal values of latitude and longitude in an interleaved notation, together with additional digits that support intermediate grid resolutions of 5, 0.5, 0.05 degrees, etc.

In the context of a spatial index, a grid or mesh is a regular tessellation of a manifold or 2-D surface that divides it into a series of contiguous cells, which can then be assigned unique identifiers and used for spatial indexing purposes. A wide variety of such grids have been proposed or are currently in use, including grids based on "square" or "rectangular" cells, triangular grids or meshes, hexagonal grids, and grids based on diamond-shaped cells. A "global grid" is a kind of grid that covers the entire surface of the globe.

<span class="mw-page-title-main">Geodesic grid</span> Spatial grid based on a geodesic polyhedron

A geodesic grid is a spatial grid based on a geodesic polyhedron or Goldberg polyhedron.

<span class="mw-page-title-main">Geohash</span> Public domain geocoding invented in 2008

Geohash is a public domain geocode system invented in 2008 by Gustavo Niemeyer which encodes a geographic location into a short string of letters and digits. Similar ideas were introduced by G.M. Morton in 1966. It is a hierarchical spatial data structure which subdivides space into buckets of grid shape, which is one of the many applications of what is known as a Z-order curve, and generally space-filling curves.

<span class="mw-page-title-main">Discrete global grid</span> Partition of Earths surface into subdivided cells

A discrete global grid (DGG) is a mosaic that covers the entire Earth's surface. Mathematically it is a space partitioning: it consists of a set of non-empty regions that form a partition of the Earth's surface. In a usual grid-modeling strategy, to simplify position calculations, each region is represented by a point, abstracting the grid as a set of region-points. Each region or region-point in the grid is called a cell.

The Open Location Code (OLC) is a geocode based in a system of regular grids for identifying an area anywhere on the Earth. It was developed at Google's Zürich engineering office, and released late October 2014. Location codes created by the OLC system are referred to as "plus codes".

References

  1. ICES, 1977. "ICES Statistical Rectangle Coding System". ICES C 1977/Gen3.
  2. 1 2 ICES, Denmark: ICES statistical rectangles. Accessed 24 October 2021.
  3. Marine Scotland Information: ICES Statistical Rectangles and Areas. Accessed 24 October 2021.
  4. Williamson, K., et al., 2017. "United Kingdom commercial sea fisheries landings by Exclusive Economic Zone of capture: 2012 – 2016". Marine Management Organisation, Newcastle-upon-Tyne, UK, 15 pp. Available at https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/647579/United_Kingdom_commercial_sea_fisheries_landings_by_Exclusive_Economic_Zone_of_capture_2012___2016.pdf.
  5. Boudron, Alan Ronan; Brunel, Thomas; Blanchet, Marie-Anne; et al. (2020). "Changing fish distributions challenge the effective management of European fisheries". Ecography. 43 (4): 494–505. doi: 10.1111/ecog.04864 . hdl: 2164/14112 .
  6. Couce, Elena; Schratzberger, Michaela; Engelhard, Georg H. (2020). "Reconstructing three decades of total international trawling effort in the North Sea". Earth System Science Data. 12 (1): 373–386. doi: 10.5194/essd-12-373-2020 .
  7. Murgier, Juliette; McLean, Matthew; Maire, Anthony; et al. (2021). "Rebound in functional distinctiveness following warming and reduced fishing in the North Sea". Proceedings of the Royal Society B. 288 (4): 20201600. doi:10.1098/rspb.2020.1600. PMC   7892419 . PMID   33434468.