In geometry, the incircle or inscribed circle of a triangle is the largest circle that can be contained in the triangle; it touches (is tangent to) the three sides. The center of the incircle is a triangle center called the triangle's incenter. [1]
An excircle or escribed circle [2] of the triangle is a circle lying outside the triangle, tangent to one of its sides and tangent to the extensions of the other two. Every triangle has three distinct excircles, each tangent to one of the triangle's sides. [3]
The center of the incircle, called the incenter , can be found as the intersection of the three internal angle bisectors. [3] [4] The center of an excircle is the intersection of the internal bisector of one angle (at vertex A, for example) and the external bisectors of the other two. The center of this excircle is called the excenter relative to the vertex A, or the excenter of A. [3] Because the internal bisector of an angle is perpendicular to its external bisector, it follows that the center of the incircle together with the three excircle centers form an orthocentric system. [5]
Suppose has an incircle with radius and center . Let be the length of , the length of , and the length of . Also let , , and be the touchpoints where the incircle touches , , and .
The incenter is the point where the internal angle bisectors of meet.
The trilinear coordinates for a point in the triangle is the ratio of all the distances to the triangle sides. Because the incenter is the same distance from all sides of the triangle, the trilinear coordinates for the incenter are [6]
The barycentric coordinates for a point in a triangle give weights such that the point is the weighted average of the triangle vertex positions. Barycentric coordinates for the incenter are given by
where , , and are the lengths of the sides of the triangle, or equivalently (using the law of sines) by
where , , and are the angles at the three vertices.
The Cartesian coordinates of the incenter are a weighted average of the coordinates of the three vertices using the side lengths of the triangle relative to the perimeter (that is, using the barycentric coordinates given above, normalized to sum to unity) as weights. The weights are positive so the incenter lies inside the triangle as stated above. If the three vertices are located at , , and , and the sides opposite these vertices have corresponding lengths , , and , then the incenter is at[ citation needed ]
The inradius of the incircle in a triangle with sides of length , , is given by [7]
where is the semiperimeter.
The tangency points of the incircle divide the sides into segments of lengths from , from , and from . [8]
See Heron's formula.
Denote the incenter of as .
The distance from vertex to the incenter is:
Use the Law of sines in the triangle .
We get . We have that .
It follows that .
The equality with the second expression is obtained the same way.
The distances from the incenter to the vertices combined with the lengths of the triangle sides obey the equation [9]
Additionally, [10]
where and are the triangle's circumradius and inradius respectively.
The collection of triangle centers may be given the structure of a group under coordinate-wise multiplication of trilinear coordinates; in this group, the incenter forms the identity element. [6]
The distances from a vertex to the two nearest touchpoints are equal; for example: [11]
If the altitudes from sides of lengths , , and are , , and , then the inradius is one-third of the harmonic mean of these altitudes; that is, [12]
The product of the incircle radius and the circumcircle radius of a triangle with sides , , and is [13]
Some relations among the sides, incircle radius, and circumcircle radius are: [14]
Any line through a triangle that splits both the triangle's area and its perimeter in half goes through the triangle's incenter (the center of its incircle). There are either one, two, or three of these for any given triangle. [15]
The incircle radius is no greater than one-ninth the sum of the altitudes. [16] : 289
The squared distance from the incenter to the circumcenter is given by [17] : 232
and the distance from the incenter to the center of the nine point circle is [17] : 232
The incenter lies in the medial triangle (whose vertices are the midpoints of the sides). [17] : 233, Lemma 1
The radius of the incircle is related to the area of the triangle. [18] The ratio of the area of the incircle to the area of the triangle is less than or equal to , with equality holding only for equilateral triangles. [19]
Suppose has an incircle with radius and center . Let be the length of , the length of , and the length of . Now, the incircle is tangent to at some point , and so is right. Thus, the radius is an altitude of . Therefore, has base length and height , and so has area . Similarly, has area and has area . Since these three triangles decompose , we see that the area is: and
where is the area of and is its semiperimeter.
For an alternative formula, consider . This is a right-angled triangle with one side equal to and the other side equal to . The same is true for . The large triangle is composed of six such triangles and the total area is:[ citation needed ]
The Gergonne triangle (of ) is defined by the three touchpoints of the incircle on the three sides. The touchpoint opposite is denoted , etc.
This Gergonne triangle, , is also known as the contact triangle or intouch triangle of . Its area is
where , , and are the area, radius of the incircle, and semiperimeter of the original triangle, and , , and are the side lengths of the original triangle. This is the same area as that of the extouch triangle. [20]
The three lines , and intersect in a single point called the Gergonne point, denoted as (or triangle center X7). The Gergonne point lies in the open orthocentroidal disk punctured at its own center, and can be any point therein. [21]
The Gergonne point of a triangle has a number of properties, including that it is the symmedian point of the Gergonne triangle. [22]
Trilinear coordinates for the vertices of the intouch triangle are given by[ citation needed ]
Trilinear coordinates for the Gergonne point are given by[ citation needed ]
or, equivalently, by the Law of Sines,
An excircle or escribed circle [2] of the triangle is a circle lying outside the triangle, tangent to one of its sides and tangent to the extensions of the other two. Every triangle has three distinct excircles, each tangent to one of the triangle's sides. [3]
The center of an excircle is the intersection of the internal bisector of one angle (at vertex , for example) and the external bisectors of the other two. The center of this excircle is called the excenter relative to the vertex , or the excenter of . [3] Because the internal bisector of an angle is perpendicular to its external bisector, it follows that the center of the incircle together with the three excircle centers form an orthocentric system. [5]
While the incenter of has trilinear coordinates , the excenters have trilinears [ citation needed ]
The radii of the excircles are called the exradii.
The exradius of the excircle opposite (so touching , centered at ) is [23] [24] where
See Heron's formula.
Source: [23]
Let the excircle at side touch at side extended at , and let this excircle's radius be and its center be . Then is an altitude of , so has area . By a similar argument, has area and has area . Thus the area of triangle is .
So, by symmetry, denoting as the radius of the incircle, .
By the Law of Cosines, we have
Combining this with the identity , we have
But , and so
which is Heron's formula.
Combining this with , we have
Similarly, gives
From the formulas above one can see that the excircles are always larger than the incircle and that the largest excircle is the one tangent to the longest side and the smallest excircle is tangent to the shortest side. Further, combining these formulas yields: [25]
The circular hull of the excircles is internally tangent to each of the excircles and is thus an Apollonius circle. [26] The radius of this Apollonius circle is where is the incircle radius and is the semiperimeter of the triangle. [27]
The following relations hold among the inradius , the circumradius , the semiperimeter , and the excircle radii , , : [14]
The circle through the centers of the three excircles has radius . [14]
If is the orthocenter of , then [14]
The Nagel triangle or extouch triangle of is denoted by the vertices , , and that are the three points where the excircles touch the reference and where is opposite of , etc. This is also known as the extouch triangle of . The circumcircle of the extouch is called the Mandart circle (cf. Mandart inellipse).
The three line segments , and are called the splitters of the triangle; they each bisect the perimeter of the triangle,[ citation needed ]
The splitters intersect in a single point, the triangle's Nagel point (or triangle center X8).
Trilinear coordinates for the vertices of the extouch triangle are given by[ citation needed ]
Trilinear coordinates for the Nagel point are given by[ citation needed ]
or, equivalently, by the Law of Sines,
The Nagel point is the isotomic conjugate of the Gergonne point.[ citation needed ]
In geometry, the nine-point circle is a circle that can be constructed for any given triangle. It is so named because it passes through nine significant concyclic points defined from the triangle. These nine points are: [28] [29]
In 1822, Karl Feuerbach discovered that any triangle's nine-point circle is externally tangent to that triangle's three excircles and internally tangent to its incircle; this result is known as Feuerbach's theorem. He proved that: [30]
The triangle center at which the incircle and the nine-point circle touch is called the Feuerbach point.
The points of intersection of the interior angle bisectors of with the segments , , and are the vertices of the incentral triangle. Trilinear coordinates for the vertices of the incentral triangle are given by[ citation needed ]
The excentral triangle of a reference triangle has vertices at the centers of the reference triangle's excircles. Its sides are on the external angle bisectors of the reference triangle (see figure at top of page). Trilinear coordinates for the vertices of the excentral triangle are given by[ citation needed ]
Let be a variable point in trilinear coordinates, and let , , . The four circles described above are given equivalently by either of the two given equations: [31] : 210–215
Euler's theorem states that in a triangle:
where and are the circumradius and inradius respectively, and is the distance between the circumcenter and the incenter.
For excircles the equation is similar:
where is the radius of one of the excircles, and is the distance between the circumcenter and that excircle's center. [32] [33] [34]
Some (but not all) quadrilaterals have an incircle. These are called tangential quadrilaterals. Among their many properties perhaps the most important is that their two pairs of opposite sides have equal sums. This is called the Pitot theorem. [35]
More generally, a polygon with any number of sides that has an inscribed circle (that is, one that is tangent to each side) is called a tangential polygon.
A triangle is a polygon with three corners and three sides, one of the basic shapes in geometry. The corners, also called vertices, are zero-dimensional points while the sides connecting them, also called edges, are one-dimensional line segments. A triangle has three internal angles, each one bounded by a pair of adjacent edges; the sum of angles of a triangle always equals a straight angle. The triangle is a plane figure and its interior is a planar region. Sometimes an arbitrary edge is chosen to be the base, in which case the opposite vertex is called the apex; the shortest segment between the base and apex is the height. The area of a triangle equals one-half the product of height and base length.
A right triangle or right-angled triangle, sometimes called an orthogonal triangle or rectangular triangle, is a triangle in which two sides are perpendicular, forming a right angle.
In geometry, the nine-point circle is a circle that can be constructed for any given triangle. It is so named because it passes through nine significant concyclic points defined from the triangle. These nine points are:
In geometry, an orthocentric system is a set of four points on a plane, one of which is the orthocenter of the triangle formed by the other three. Equivalently, the lines passing through disjoint pairs among the points are perpendicular, and the four circles passing through any three of the four points have the same radius.
In mathematics and physics, the centroid, also known as geometric center or center of figure, of a plane figure or solid figure is the arithmetic mean position of all the points in the surface of the figure. The same definition extends to any object in -dimensional Euclidean space.
In geometry, the incenter of a triangle is a triangle center, a point defined for any triangle in a way that is independent of the triangle's placement or scale. The incenter may be equivalently defined as the point where the internal angle bisectors of the triangle cross, as the point equidistant from the triangle's sides, as the junction point of the medial axis and innermost point of the grassfire transform of the triangle, and as the center point of the inscribed circle of the triangle.
In the geometry of triangles, the incircle and nine-point circle of a triangle are internally tangent to each other at the Feuerbach point of the triangle. The Feuerbach point is a triangle center, meaning that its definition does not depend on the placement and scale of the triangle. It is listed as X(11) in Clark Kimberling's Encyclopedia of Triangle Centers, and is named after Karl Wilhelm Feuerbach.
In geometry, the semiperimeter of a polygon is half its perimeter. Although it has such a simple derivation from the perimeter, the semiperimeter appears frequently enough in formulas for triangles and other figures that it is given a separate name. When the semiperimeter occurs as part of a formula, it is typically denoted by the letter s.
In plane geometry, Morley's trisector theorem states that in any triangle, the three points of intersection of the adjacent angle trisectors form an equilateral triangle, called the first Morley triangle or simply the Morley triangle. The theorem was discovered in 1899 by Anglo-American mathematician Frank Morley. It has various generalizations; in particular, if all the trisectors are intersected, one obtains four other equilateral triangles.
In geometry, the circumscribed circle or circumcircle of a triangle is a circle that passes through all three vertices. The center of this circle is called the circumcenter of the triangle, and its radius is called the circumradius. The circumcenter is the point of intersection between the three perpendicular bisectors of the triangle's sides, and is a triangle center.
In geometry, the trilinear coordinatesx : y : z of a point relative to a given triangle describe the relative directed distances from the three sidelines of the triangle. Trilinear coordinates are an example of homogeneous coordinates. The ratio x : y is the ratio of the perpendicular distances from the point to the sides opposite vertices A and B respectively; the ratio y : z is the ratio of the perpendicular distances from the point to the sidelines opposite vertices B and C respectively; and likewise for z : x and vertices C and A.
In Euclidean geometry, a tangential quadrilateral or circumscribed quadrilateral is a convex quadrilateral whose sides all can be tangent to a single circle within the quadrilateral. This circle is called the incircle of the quadrilateral or its inscribed circle, its center is the incenter and its radius is called the inradius. Since these quadrilaterals can be drawn surrounding or circumscribing their incircles, they have also been called circumscribable quadrilaterals, circumscribing quadrilaterals, and circumscriptible quadrilaterals. Tangential quadrilaterals are a special case of tangential polygons.
In geometry, the Nagel point is a triangle center, one of the points associated with a given triangle whose definition does not depend on the placement or scale of the triangle. It is the point of concurrency of all three of the triangle's splitters.
In geometry, the Steiner inellipse, midpoint inellipse, or midpoint ellipse of a triangle is the unique ellipse inscribed in the triangle and tangent to the sides at their midpoints. It is an example of an inellipse. By comparison the inscribed circle and Mandart inellipse of a triangle are other inconics that are tangent to the sides, but not at the midpoints unless the triangle is equilateral. The Steiner inellipse is attributed by Dörrie to Jakob Steiner, and a proof of its uniqueness is given by Dan Kalman.
In Euclidean geometry, a bicentric quadrilateral is a convex quadrilateral that has both an incircle and a circumcircle. The radii and centers of these circles are called inradius and circumradius, and incenter and circumcenter respectively. From the definition it follows that bicentric quadrilaterals have all the properties of both tangential quadrilaterals and cyclic quadrilaterals. Other names for these quadrilaterals are chord-tangent quadrilateral and inscribed and circumscribed quadrilateral. It has also rarely been called a double circle quadrilateral and double scribed quadrilateral.
In Euclidean geometry, a tangential trapezoid, also called a circumscribed trapezoid, is a trapezoid whose four sides are all tangent to a circle within the trapezoid: the incircle or inscribed circle. It is the special case of a tangential quadrilateral in which at least one pair of opposite sides are parallel. As for other trapezoids, the parallel sides are called the bases and the other two sides the legs. The legs can be equal, but they don't have to be.
In geometry, the isoperimetric point is a triangle center — a special point associated with a plane triangle. The term was originally introduced by G.R. Veldkamp in a paper published in the American Mathematical Monthly in 1985 to denote a point P in the plane of a triangle △ABC having the property that the triangles △PBC, △PCA, △PAB have isoperimeters, that is, having the property that
In geometry, central lines are certain special straight lines that lie in the plane of a triangle. The special property that distinguishes a straight line as a central line is manifested via the equation of the line in trilinear coordinates. This special property is related to the concept of triangle center also. The concept of a central line was introduced by Clark Kimberling in a paper published in 1994.
In plane geometry, a mixtilinear incircle of a triangle is a circle which is tangent to two of its sides and internally tangent to its circumcircle. The mixtilinear incircle of a triangle tangent to the two sides containing vertex is called the -mixtilinear incircle. Every triangle has three unique mixtilinear incircles, one corresponding to each vertex.