Leblanc process

Last updated
Leblanc process
Process typeChemical
Industrial sector(s)Chlor-alkali industry
Feedstock sodium chloride, sulfuric acid, coal, calcium carbonate
Product(s) soda ash, hydrochloric acid, calcium sulfide, carbon dioxide
Inventor Nicolas Leblanc
Year of invention1791
Developer(s) William Losh, James Muspratt, Charles Tennant

The Leblanc process (pronounced leh-blaank) was an early industrial process for making soda ash (sodium carbonate) used throughout the 19th century, named after its inventor, Nicolas Leblanc. It involved two stages: making sodium sulfate from sodium chloride, followed by reacting the sodium sulfate with coal and calcium carbonate to make sodium carbonate. The process gradually became obsolete after the development of the Solvay process.



Soda ash (sodium carbonate) and potash (potassium carbonate), collectively termed alkali, are vital chemicals in the glass, textile, soap, and paper industries. The traditional source of alkali in western Europe had been potash obtained from wood ashes. However, by the 13th century, deforestation had rendered this means of production uneconomical, and alkali had to be imported. Potash was imported from North America, Scandinavia, and Russia, where large forests still stood. Soda ash was imported from Spain and the Canary Islands, where it was produced from the ashes of glasswort plants (called barilla ashes in Spain), or imported from Syria. [1] The soda ash from glasswort plant ashes was mainly a mixture of sodium carbonate and potassium carbonate. In addition in Egypt, naturally occurring sodium carbonate, the mineral natron, was mined from dry lakebeds. In Britain, the only local source of alkali was from kelp, which washed ashore in Scotland and Ireland. [2] [3]

In 1783, King Louis XVI of France and the French Academy of Sciences offered a prize of 2400 livres for a method to produce alkali from sea salt (sodium chloride). In 1791, Nicolas Leblanc, physician to Louis Philip II, Duke of Orléans, patented a solution. That same year he built the first Leblanc plant for the Duke at Saint-Denis, and this began to produce 320 tons of soda per year. [4] He was denied his prize money because of the French Revolution. [5]

For more recent history, see industrial history below.


Reaction scheme of the Leblanc process (green = reactants, black = intermediates, red = products) Leblanc process reaction scheme.svg
Reaction scheme of the Leblanc process (green = reactants, black = intermediates, red = products)

In the first step, sodium chloride is treated with sulfuric acid in the Mannheim process. This reaction produces sodium sulfate (called the salt cake) and hydrogen chloride:

2 NaCl + H2SO4 → Na2SO4 + 2 HCl

This chemical reaction had been discovered in 1772 by the Swedish chemist Carl Wilhelm Scheele. Leblanc's contribution was the second step, in which a mixture of the salt cake and crushed limestone (calcium carbonate) was reduced by heating with coal. [6] This conversion entails two parts. First is the carbothermic reaction whereby the coal, a source of carbon, reduces the sulfate to sulfide:

Na2SO4 + 2  C → Na2S + 2 CO2

In the second stage, is the reaction to produce sodium carbonate and calcium sulfide. This mixture is called black ash.[ citation needed ]

Na2S + CaCO3 → Na2CO3 + CaS

The soda ash is extracted from the black ash with water. Evaporation of this extract yields solid sodium carbonate. This extraction process was termed lixiviation.[ citation needed ]

Process detail

The sodium chloride is initially mixed with concentrated sulfuric acid and the mixture exposed to low heat. The hydrogen chloride gas bubbles off and was discarded to atmosphere before gas absorption towers were introduced. This continues until all that is left is a fused mass. This mass still contains enough chloride to contaminate the later stages of the process. The mass is then exposed to direct flame, which evaporates nearly all of the remaining chloride. [7] [8]

The coal used in the next step must be low in nitrogen to avoid the formation of cyanide. The calcium carbonate, in the form of limestone or chalk, should be low in magnesia and silica. The weight ratio of the charge is 2:2:1 of salt cake, calcium carbonate, and carbon respectively. It is fired in a reverberatory furnace at about 1000 °C. [9] Sometimes the reverberatory furnace rotated and thus was called a "revolver". [10]

The black-ash product of firing must be lixiviated right away to prevent oxidation of sulfides back to sulfate. [9] In the lixiviation process, the black-ash is completely covered in water, again to prevent oxidation. To optimize the leaching of soluble material, the lixiviation is done in cascaded stages. That is, pure water is used on the black-ash that has already been through prior stages. The liquor from that stage is used to leach an earlier stage of the black-ash, and so on. [9]

The final liquor is treated by blowing carbon dioxide through it. This precipitates dissolved calcium and other impurities. It also volatilizes the sulfide, which is carried off as H2S gas. Any residual sulfide can be subsequently precipitated by adding zinc hydroxide. The liquor is separated from the precipitate and evaporated using waste heat from the reverberatory furnace. The resulting ash is then redissolved into concentrated solution in hot water. Solids that fail to dissolve are separated. The solution is then cooled to recrystallize nearly pure sodium carbonate decahydrate. [9]

Industrial history

Leblanc established the first Leblanc process plant in 1791 in St. Denis. However, French Revolutionaries seized the plant, along with the rest of Louis Philip's estate, in 1794, and publicized Leblanc's trade secrets. Napoleon I returned the plant to Leblanc in 1801, but lacking the funds to repair it and compete against other soda works that had been established in the meantime, Leblanc committed suicide in 1806. [5]

By the early 19th century, French soda ash producers were making 10,000 - 15,000 tons annually. However, it was in Britain that the Leblanc process became most widely practiced. [5] The first British soda works using the Leblanc process was built by the Losh family of iron founders at the Losh, Wilson and Bell works in Walker on the River Tyne in 1816, but steep British tariffs on salt production hindered the economics of the Leblanc process and kept such operations on a small scale until 1824. Following the repeal of the salt tariff, the British soda industry grew dramatically. The Bonnington Chemical Works was possibly the earliest production, [11] and the chemical works established by James Muspratt in Liverpool and Flint, and by Charles Tennant near Glasgow became some of the largest in the world. Muspratt's Liverpool works enjoyed proximity and transport links to the Cheshire salt mines, the St Helens coalfields and the North Wales and Derbyshire limestone quarries. [12] By 1852, annual soda production had reached 140,000 tons in Britain and 45,000 tons in France. [5] By the 1870s, the British soda output of 200,000 tons annually exceeded that of all other nations in the world combined.[ citation needed ]

Pollution issues

The Leblanc process plants were quite damaging to the local environment. The process of generating salt cake from salt and sulfuric acid released hydrochloric acid gas, and because this acid was industrially useless in the early 19th century, it was simply vented into the atmosphere. Also, an insoluble smelly solid waste was produced. For every 8 tons of soda ash, the process produced 5.5 tons of hydrogen chloride and 7 tons of calcium sulfide waste. This solid waste (known as galligu) had no economic value, and was piled in heaps and spread on fields near the soda works, where it weathered to release hydrogen sulfide, the toxic gas responsible for the odor of rotten eggs.[ citation needed ]

Because of their noxious emissions, Leblanc soda works became targets of lawsuits and legislation. An 1839 suit against soda works alleged, "the gas from these manufactories is of such a deleterious nature as to blight everything within its influence, and is alike baneful to health and property. The herbage of the fields in their vicinity is scorched, the gardens neither yield fruit nor vegetables; many flourishing trees have lately become rotten naked sticks. Cattle and poultry droop and pine away. It tarnishes the furniture in our houses, and when we are exposed to it, which is of frequent occurrence, we are afflicted with coughs and pains in the head ... all of which we attribute to the Alkali works." [13]

In 1863, the British Parliament passed the Alkali Act 1863, the first of several Alkali Acts, the first modern air pollution legislation. This act allowed that no more than 5% of the hydrochloric acid produced by alkali plants could be vented to the atmosphere. To comply with the legislation, soda works passed the escaping hydrogen chloride gas up through a tower packed with charcoal, where it was absorbed by water flowing in the other direction. The chemical works usually dumped the resulting hydrochloric acid solution into nearby bodies of water, killing fish and other aquatic life.[ citation needed ]

The Leblanc process also meant very unpleasant working conditions for the operators. It originally required careful operation and frequent operator interventions (some involving heavy manual labour) into processes giving off hot noxious chemicals. [14] Sometimes, workmen cleaning the reaction products out of the reverberatory furnace wore cloth mouth-and-nose gags to keep dust and aerosols out of the lungs. [15] [16]

This improved somewhat later as processes were more heavily mechanised to improve economics and uniformity of product.[ citation needed ]

By the 1880s, methods for converting the hydrochloric acid to chlorine gas for the manufacture of bleaching powder and for reclaiming the sulfur in the calcium sulfide waste had been discovered, but the Leblanc process remained more wasteful and more polluting than the Solvay process. The same is true when it is compared with the later electrolytical processes which eventually replaced it for chlorine production.[ citation needed ]


In 1861, the Belgian chemist Ernest Solvay developed a more direct process for producing soda ash from salt and limestone through the use of ammonia. The only waste product of this Solvay process was calcium chloride, and so it was both more economical and less polluting than the Leblanc method. From the late 1870s, Solvay-based soda works on the European continent provided stiff competition in their home markets to the Leblanc-based British soda industry. Additionally the Brunner Mond Solvay plant which opened in 1874 at Winnington near Northwich provided fierce competition nationally. Leblanc producers were unable to compete with Solvay soda ash, and their soda ash production was effectively an adjunct to their still profitable production of chlorine, bleaching powder etc. (The unwanted by-products had become the profitable products). The development of electrolytic methods of chlorine production removed that source of profits as well, and there followed a decline moderated only by "gentlemen's' agreements" with Solvay producers. [17] By 1900, 90% of the world's soda production was through the Solvay method, or on the North American continent, through the mining of trona, discovered in 1938, which caused the closure of the last North American Solvay plant in 1986. The last Leblanc-based soda ash plant closed in the early 1920s. [3] However, because of solubility of the bicarbonate, the Solvay process does not work for the manufacture of potassium carbonate, and the Leblanc process continued in limited use for its manufacture until much later.[ citation needed ]


There is a strong case for arguing that Leblanc process waste is the most endangered habitat in the UK, since the waste weathers down to calcium carbonate and produces a haven for plants that thrive in lime-rich soils, known as calcicoles. Only four such sites have survived the new millennium; three are protected as local nature reserves of which the largest, at Nob End near Bolton, is an SSSI and Local Nature Reserve - largely for its sparse orchid-calcicole flora, most unusual in an area with acid soils. This alkaline island contains within it an acid island, where acid boiler slag was deposited, which now shows up as a zone dominated by heather, Calluna vulgaris . [18]

Related Research Articles

Sodium hydroxide Chemical compound with formula NaOH

Sodium hydroxide, also known as lye and caustic soda, is an inorganic compound with the formula NaOH. It is a white solid ionic compound consisting of sodium cations Na+ and hydroxide anions OH.

Chemical industry Industry (branch), which is engaged in the manufacturing of chemical products

The chemical industry comprises the companies that produce industrial chemicals. Central to the modern world economy, it converts raw materials into more than 70,000 different products. The plastics industry contains some overlap, as some chemical companies produce plastics as well as chemicals.

Sodium carbonate Chemical compound

Sodium carbonate, Na2CO3, (also known as washing soda, soda ash and soda crystals) is the inorganic compound with the formula Na2CO3 and its various hydrates. All forms are white, odourless, water-soluble salts that yield moderately alkaline solutions in water. Historically, it was extracted from the ashes of plants growing in sodium-rich soils. Because the ashes of these sodium-rich plants were noticeably different from ashes of wood (once used to produce potash), sodium carbonate became known as "soda ash". It is produced in large quantities from sodium chloride and limestone by the Solvay process.

The compound hydrogen chloride has the chemical formula HCl and as such is a hydrogen halide. At room temperature, it is a colourless gas, which forms white fumes of hydrochloric acid upon contact with atmospheric water vapor. Hydrogen chloride gas and hydrochloric acid are important in technology and industry. Hydrochloric acid, the aqueous solution of hydrogen chloride, is also commonly given the formula HCl.

The Solvay process or ammonia-soda process is the major industrial process for the production of sodium carbonate (soda ash, Na2CO3). The ammonia-soda process was developed into its modern form by the Belgian chemist Ernest Solvay during the 1860s. The ingredients for this are readily available and inexpensive: salt brine (from inland sources or from the sea) and limestone (from quarries). The worldwide production of soda ash in 2005 was estimated at 42 million tonnes, which is more than six kilograms (13 lb) per year for each person on Earth. Solvay-based chemical plants now produce roughly three-quarters of this supply, with the remaining being mined from natural deposits. This method superseded the Leblanc process.

Sodium sulfate Chemical compound with formula Na2SO4

Sodium sulfate (also known as sodium sulphate or sulfate of soda) is the inorganic compound with formula Na2SO4 as well as several related hydrates. All forms are white solids that are highly soluble in water. With an annual production of 6 million tonnes, the decahydrate is a major commodity chemical product. It is mainly used as a filler in the manufacture of powdered home laundry detergents and in the Kraft process of paper pulping for making highly alkaline sulfides.

Nicolas Leblanc French chemist and surgeon

Nicolas Leblanc was a French chemist and surgeon who discovered how to manufacture soda ash from common salt.

Barium carbonate Chemical compound

Barium carbonate is the inorganic compound with the formula BaCO3. Like most alkaline earth metal carbonates, it is a white salt that is poorly soluble in water. It occurs as the mineral known as witherite. In a commercial sense, it is one of the most important barium compounds.

The chloralkali process is an industrial process for the electrolysis of sodium chloride solutions. It is the technology used to produce chlorine and sodium hydroxide, which are commodity chemicals required by industry. 35 million tons of chlorine were prepared by this process in 1987. The chlorine and sodium hydroxide produced in this process are widely used in the chemical industry.

Calcium sulfide Chemical compound of formula CaS

Calcium sulfide is the chemical compound with the formula CaS. This white material crystallizes in cubes like rock salt. CaS has been studied as a component in a process that would recycle gypsum, a product of flue-gas desulfurization. Like many salts containing sulfide ions, CaS typically has an odour of H2S, which results from small amount of this gas formed by hydrolysis of the salt.

James Muspratt

James Muspratt was a British chemical manufacturer who was the first to make alkali by the Leblanc process on a large scale in the United Kingdom.

Alkali manufacture is the process by which an alkali is made. Typical alkalis, produced commercially, include sodium hydroxide, sodium carbonate, potassium hydroxide and potassium carbonate.

<i>Salsola soda</i> Species of plant

Salsola soda, more commonly known in English as opposite-leaved saltwort, oppositeleaf Russian thistle, or barilla plant, is a small, annual, succulent shrub that is native to the Mediterranean Basin. It is a halophyte that typically grows in coastal regions and can be irrigated with salt water.

Tata Chemicals Europe is a UK-based chemicals company that is a subsidiary of Tata Chemicals Limited, itself a part of the India-based Tata Group. Its principal products are soda ash, sodium bicarbonate, calcium chloride and associated alkaline chemicals.

Alkali soil Soil type with pH > 8.5

Alkali, or Alkaline, soils are clay soils with high pH, a poor soil structure and a low infiltration capacity. Often they have a hard calcareous layer at 0.5 to 1 metre depth. Alkali soils owe their unfavorable physico-chemical properties mainly to the dominating presence of sodium carbonate, which causes the soil to swell and difficult to clarify/settle. They derive their name from the alkali metal group of elements, to which sodium belongs, and which can induce basicity. Sometimes these soils are also referred to as alkaline sodic soils.
Alkaline soils are basic, but not all basic soils are alkaline.

Chlorine gas can be produced by extracting from natural materials, including the electrolysis of a sodium chloride solution (brine) and other ways.

Hydrochloric acid Strong mineral acid

Hydrochloric acid, also known as muriatic acid, is an aqueous solution of hydrogen chloride. It is a colorless solution with a distinctive pungent smell. It is classified as a strong acid. It is a component of the gastric acid in the digestive systems of most animal species, including humans. Hydrochloric acid is an important laboratory reagent and industrial chemical.

Chemische Fabrik Kalk

Chemische Fabrik Kalk (CFK) was a German chemicals company based in Kalk, a city district of Cologne. The company was founded in 1858 as Chemische Fabrik Vorster & Grüneberg, Cöln by Julius Vorster and Hermann Julius Grüneberg and was renamed to Chemische Fabrik Kalk GmbH in 1892. At times the company was the second-largest German producer of soda ash and was, with almost 2400 employees, one of the largest employers in Cologne. For decades the chimneys and the water tower of the factory dominated the skyline of Cologne-Kalk.

The Bonnington Chemical Works was a pioneer coal tar processing plant established in Edinburgh. It was probably the first successful independent facility established for the integrated treatment of gasworks waste, and manufactured the residues of the Edinburgh gasworks into useful products for over half a century.


  1. Ashtor, Eliyahu; Cevidalli, Guidobaldo (1983). "Levantine Alkali Ashes and European Industries". Journal of European Economic History. 12: 475–522.
  2. Clow, Archibald and Clow, Nan L. (1952). Chemical Revolution, (Ayer Co Pub, June 1952), pp. 65-90. ISBN   0-8369-1909-2.
  3. 1 2 Kiefer, David M. (2002). "It was all about alkali". Today's Chemist at Work. American Chemical Society. 11 (1): 45–6. Retrieved 22 April 2007.
  4. Aftalion, Fred (1991). A History of the International Chemical Industry. Philadelphia: University of Pennsylvania Press. pp. 11–13. ISBN   978-0-8122-1297-6.
  5. 1 2 3 4 Aftalion, Fred (1991). A History of the International Chemical Industry. Philadelphia: University of Pennsylvania Press. pp. 14–16. ISBN   978-0-8122-1297-6.
  6. Christian Thieme (2000). "Sodium Carbonates". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a24_299. ISBN   978-3527306732.
  7. "Hydrochloric Acid and Sodium Sulphate". Lenntech. Retrieved 22 April 2007.
  8. Chisholm, Hugh, ed. (1911). "Alkali Manufacture"  . Encyclopædia Britannica . Vol. 1 (11th ed.). Cambridge University Press. pp. 674–685.
  9. 1 2 3 4 "The Soda Industries". Lenntech. Retrieved 22 April 2007.
  10. Museum, Victoria and Albert (1908). Catalogue of the mechanical engineering collection in the Science Division of the Victoria and Albert Museum, South Kensington, with descriptive and historical notes. Vol. 2. H.M.S.O. p. 107. OCLC   608086021.
  11. Ronalds, B.F. (2019). "Bonnington Chemical Works (1822-1878): Pioneer Coal Tar Company". International Journal for the History of Engineering & Technology. 89 (1–2): 73–91. doi:10.1080/17581206.2020.1787807. S2CID   221115202.
  12. Peter Reed, Acid Rain and the Rise of the Environmental Chemist in Nineteenth Century Britain, (2014), p. 94
  13. Newcastle upon Tyne (England). Town Council (1840). Newcastle Council Reports. pp. 2–.
  14. Russell. Colin Archibald, Chemistry, society and environment: a new history of the British chemical industry, Royal Society of Chemistry, 2000. ISBN   0-85404-599-6
  15. Described, and called a "gag", in a recorded commentary in the Catalyst chemical industry museum in Runcorn (Cheshire, England), to keep alkali dust out of workers' lungs in the early years of the chemical industry in Britain.
  16. Beeby, Ann (September 2017). "What did our Ancestors do?" (PDF). Dig This! The Newsletter of 3D Archaeological Society. p. 7. Archived from the original (PDF) on 2019-04-19. Retrieved 2022-08-11.
  17. Reader W J Imperial Chemical Industries; A History Volume 1 The Forerunners 1870-1926 Oxford University Press 1970 SBN 19 215937 2
  18. Shaw, PJA & Halton W. (1998). Classic sites: Nob End, Bolton. British Wildlife 10, 13-17.