Leaching (chemistry)

Last updated

Leaching is the process of a solute becoming detached or extracted from its carrier substance by way of a solvent. [1]

Contents

Leaching is a naturally occurring process which scientists have adapted for a variety of applications with a variety of methods. Specific extraction methods depend on the soluble characteristics relative to the sorbent material such as concentration, distribution, nature, and size. [1] Leaching can occur naturally seen from plant substances (inorganic and organic), [2] [3] solute leaching in soil, [4] and in the decomposition of organic materials. [5] Leaching can also be applied affectedly to enhance water quality and contaminant removal, [1] [6] as well as for disposal of hazardous waste products such as fly ash, [7] or rare earth elements (REEs). [8] Understanding leaching characteristics is important in preventing or encouraging the leaching process and preparing for it in the case where it is inevitable. [2]

In an ideal leaching equilibrium stage, all the solute is dissolved by the solvent, leaving the carrier of the solute unchanged. [1] The process of leaching however is not always ideal, and can be quite complex to understand and replicate, [6] and often different methodologies will produce different results. [9]

Leaching occurring in a cement wall due to natural weathering events. Cement-2729625 960 720.jpg
Leaching occurring in a cement wall due to natural weathering events.

Leaching processes

There are many types of leaching scenarios; therefore, the extent of this topic is vast. [1] [3] [9] In general, however, the three substances can be described as:

Substance A and B are somewhat homogenous in a system prior to the introduction of substance C. [10] At the beginning of the leaching process, substance C will work at dissolving the surficial substance B at a fairly high rate. [1] The rate of dissolution will decrease substantially once it needs to penetrate through the pores of substance A in order to continue targeting substance B. [1] This penetration can often lead to dissolution of substance A, [1] or the product of more than one solute, [10] both unsatisfactory if specific leaching is desired. The physiochemical and biological properties of the carrier and solute should be considered when observing the leaching process, and certain properties may be more important depending on the material, the solvent, and their availability. [9] These specific properties can include, but are not limited to:

The general process is typically broken up and summarized into three parts: [1]

  1. Dissolution of surficial solute by solvent
  2. Diffusion of inner-solute through the pores of the carrier to reach the solvent
  3. Transfer of dissolved solute out of the system

Leaching processes for biological substances

Biological substances can experience leaching themselves, [2] as well as be used for leaching as part of the solvent substance to recover heavy metals. [6] Many plants experience leaching of phenolics, carbohydrates, and amino acids, and can experience as much as 30% mass loss from leaching, [5] just from sources of water such as rain, dew, mist, and fog. [2] These sources of water would be considered the solvent in the leaching process and can also lead to the leaching of organic nutrients from plants such as free sugars, pectic substances, and sugar alcohols. [2] This can in turn lead to more diversity in plant species that may experience a more direct access to water. [2] This type of leaching can often lead to the removal of an undesirable component from the solid by water, this process is called washing. [11] A major concern for leaching of plants, is if pesticides are leached and carried through stormwater runoff,; [3] this is not only necessary to plant health, but it is important to control because pesticides can be toxic to human and animal health. [3]

Bioleaching is a term that describes the removal of metal cations from insoluble ores by biological oxidation and complexation processes. [6] This process is done in most part to extract copper, cobalt, nickel, zinc, and uranium from insoluble sulfides or oxides. [6] Bioleaching processes can also be used in the re-use of fly ash by recovering aluminum using sulfuric acid. [7]

Leaching processes for fly ash

Coal fly ash is a product that experiences heavy amounts of leaching during disposal. [7] Though the re-use of fly ash in other materials such as concrete and bricks is encouraged, still much of it in the United States is disposed of in holding ponds, lagoons, landfills, and slag heaps. [7] These disposal sites all contain water where washing effects can cause leaching of many different major elements, depending on the type of fly ash and the location where it originated. [7] The leaching of fly ash is only concerning if the fly ash has not been disposed of properly, such as in the case of the Kingston Fossil Plant in Roane County, Tennessee. [12] The Tennessee Valley Authority Kingston Fossil Plant structural failure lead to massive destruction throughout the area and serious levels of contamination downstream to both Emory River and Clinch River. [12]

Leaching processes in soil

Leaching in soil is highly dependent on the characteristics of the soil, which makes modeling efforts difficult. [4] Most leaching comes from infiltration of water, a washing effect much like that described for the leaching process of biological substances. [4] [11] The leaching is typically described by solute transport models, such as Darcy's Law, mass flow expressions, and diffusion-dispersion understandings. [4] Leaching is controlled largely by the hydraulic conductivity of the soil, which is dependent on particle size and relative density that the soil has been consolidated to via stress. [4] Diffusion is controlled by other factors such as pore size and soil skeleton, tortuosity of flow path, and distribution of the solvent (water) and solutes. [4]

Leaching for mineral extraction

Leaching can sometimes be used to extract valuable materials from a wastewater product/ raw materials. In the field of mineralogy, acid leaching is common to extract Metals such as vanadium, Cobalt, Nickel, Manganese, Fe etc. from raw materials/ reused materials. [13] [14] [15] In recent years, there has been more attention given to metal leachig to recover precious metals from waste materials. For example, the extraction of valuable metals from wastewater. [15]

Leaching mechanisms

Due to the assortment of leaching processes there are many variations in the data to be collected through laboratory methods and modeling, making it hard to interpret the data itself. [10] Not only is the specified leaching process important, but also the focus of the experimentation itself. For instance, the focus could be directed toward mechanisms causing leaching, mineralogy as a group or individually, or the solvent that causes leaching. [10] Most tests are done by evaluating mass loss due to a reagent, heat, or simply washing with water. [1] A summary of various leaching processes and their respective laboratory tests can be viewed in the following table:

Table 1: Laboratory Tests for Various Leaching Processes
Leaching ProcessLaboratory Tests
Waste Leachate RemovalBatch Test or Column Test [9]
Leaching from Plantst-test or permutation test [5]
Mobilization of Metal CationsBioleaching [6]
Leaching Fly AshEvaporation from Disposal Pond [7]
Cellular ExtractionLight Petroleum Fractions, Trichlorethylene Solvent, or Acetone/Ether Solvent [1]
Coarse Solids LeachingBatch Plant [1]
Fine Solids LeachingAgitation by Mechanical Stirrer or Compressed Air [1]

Environmentally friendly leaching

Some recent work has been done to see if organic acids can be used to leach lithium and cobalt from spent batteries with some success. Experiments performed with varying temperatures and concentrations of malic acid show that the optimal conditions are 2.0 m/L of organic acid at a temperature of 90 °C. [16] The reaction had an overall efficiency exceeding 90% with no harmful byproducts.

4 LiCoO2(solid) + 12 C4H6O5(liquid) → 4 LiC4H5O5(liquid) + 4 Co(C4H6O5)2(liquid) + 6 H2O(liquid) + O2(gas)

The same analysis with citric acid showed similar results with an optimal temperature and concentration of 90 °C and 1.5 molar solution of citric acid. [17]

See also

Related Research Articles

Bioleaching is the extraction or liberation of metals from their ores through the use of living organisms. Bioleaching is one of several applications within biohydrometallurgy and several methods are used to treat ores or concentrates containing copper, zinc, lead, arsenic, antimony, nickel, molybdenum, gold, silver, and cobalt.

<span class="mw-page-title-main">Lithium carbonate</span> Chemical compound

Lithium carbonate is an inorganic compound, the lithium salt of carbonic acid with the formula Li
2CO
3. This white salt is widely used in processing metal oxides. It is on the World Health Organization's List of Essential Medicines for its efficacy in the treatment of mood disorders such as bipolar disorder.

Extractive metallurgy is a branch of metallurgical engineering wherein process and methods of extraction of metals from their natural mineral deposits are studied. The field is a materials science, covering all aspects of the types of ore, washing, concentration, separation, chemical processes and extraction of pure metal and their alloying to suit various applications, sometimes for direct use as a finished product, but more often in a form that requires further working to achieve the given properties to suit the applications.

<span class="mw-page-title-main">Lithium-ion battery</span> Rechargeable battery type

A lithium-ion or Li-ion battery is a type of rechargeable battery that uses the reversible intercalation of Li+ ions into electronically conducting solids to store energy. In comparison with other commercial rechargeable batteries, Li-ion batteries are characterized by higher specific energy, higher energy density, higher energy efficiency, a longer cycle life, and a longer calendar life. Also noteworthy is a dramatic improvement in lithium-ion battery properties after their market introduction in 1991: within the next 30 years, their volumetric energy density increased threefold while their cost dropped tenfold.

Leaching is the loss or extraction of certain materials from a carrier into a liquid, and may refer to:

<span class="mw-page-title-main">Copper extraction</span> Process of extracting copper from the ground

Copper extraction refers to the methods used to obtain copper from its ores. The conversion of copper ores consists of a series of physical, chemical and electrochemical processes. Methods have evolved and vary with country depending on the ore source, local environmental regulations, and other factors.

<span class="mw-page-title-main">Phytoremediation</span> Decontamination technique using living plants

Phytoremediation technologies use living plants to clean up soil, air and water contaminated with hazardous contaminants. It is defined as "the use of green plants and the associated microorganisms, along with proper soil amendments and agronomic techniques to either contain, remove or render toxic environmental contaminants harmless". The term is an amalgam of the Greek phyto (plant) and Latin remedium. Although attractive for its cost, phytoremediation has not been demonstrated to redress any significant environmental challenge to the extent that contaminated space has been reclaimed.

<span class="mw-page-title-main">Industrial wastewater treatment</span> Processes used for treating wastewater that is produced by industries as an undesirable by-product

Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater that can be treated in sewage treatment plants. Most industrial processes, such as petroleum refineries, chemical and petrochemical plants have their own specialized facilities to treat their wastewaters so that the pollutant concentrations in the treated wastewater comply with the regulations regarding disposal of wastewaters into sewers or into rivers, lakes or oceans. This applies to industries that generate wastewater with high concentrations of organic matter, toxic pollutants or nutrients such as ammonia. Some industries install a pre-treatment system to remove some pollutants, and then discharge the partially treated wastewater to the municipal sewer system.

<span class="mw-page-title-main">Liquid–liquid extraction</span> Method to separate compounds or metal complexes

Liquid–liquid extraction, also known as solvent extraction and partitioning, is a method to separate compounds or metal complexes, based on their relative solubilities in two different immiscible liquids, usually water (polar) and an organic solvent (non-polar). There is a net transfer of one or more species from one liquid into another liquid phase, generally from aqueous to organic. The transfer is driven by chemical potential, i.e. once the transfer is complete, the overall system of chemical components that make up the solutes and the solvents are in a more stable configuration. The solvent that is enriched in solute(s) is called extract. The feed solution that is depleted in solute(s) is called the raffinate. Liquid-liquid extraction is a basic technique in chemical laboratories, where it is performed using a variety of apparatus, from separatory funnels to countercurrent distribution equipment called as mixer settlers. This type of process is commonly performed after a chemical reaction as part of the work-up, often including an acidic work-up.

<span class="mw-page-title-main">Soil contamination</span> Pollution of land by human-made chemicals or other alteration

Soil contamination, soil pollution, or land pollution as a part of land degradation is caused by the presence of xenobiotic (human-made) chemicals or other alteration in the natural soil environment. It is typically caused by industrial activity, agricultural chemicals or improper disposal of waste. The most common chemicals involved are petroleum hydrocarbons, polynuclear aromatic hydrocarbons, solvents, pesticides, lead, and other heavy metals. Contamination is correlated with the degree of industrialization and intensity of chemical substance. The concern over soil contamination stems primarily from health risks, from direct contact with the contaminated soil, vapour from the contaminants, or from secondary contamination of water supplies within and underlying the soil. Mapping of contaminated soil sites and the resulting clean ups are time-consuming and expensive tasks, and require expertise in geology, hydrology, chemistry, computer modelling, and GIS in Environmental Contamination, as well as an appreciation of the history of industrial chemistry.

<span class="mw-page-title-main">Green waste</span> Biodegradable waste

Green waste, also known as "biological waste", is any organic waste that can be composted. It is most usually composed of refuse from gardens such as grass clippings or leaves, and domestic or industrial kitchen wastes. Green waste does not include things such as dried leaves, pine straw, or hay. Such materials are rich in carbon and considered "brown wastes," while green wastes contain high concentrations of nitrogen. Green waste can be used to increase the efficiency of many composting operations and can be added to soil to sustain local nutrient cycling.

Biomining refers to any process that uses living organisms to extract metals from ores and other solid materials. Typically these processes involve prokaryotes, however fungi and plants may also be used. Biomining is one of several applications within biohydrometallurgy with applications in ore refinement, precious metal recovery, and bioremediation. The largest application currently being used is the treatment of mining waste containing iron, copper, zinc, and gold allowing for salvation of any discarded minerals. It may also be useful in maximizing the yields of increasingly low grade ore deposits. Biomining has been proposed as a relatively environmentally friendly alternative and/or supplementation to traditional mining. Current methods of biomining are modified leach mining processes. These aptly named bioleaching processes most commonly includes the inoculation of extracted rock with bacteria and acidic solution, with the leachate salvaged and processed for the metals of value. Biomining has many applications outside of metal recovery, most notably is bioremediation which has already been used to clean up coastlines after oil spills. There are also many promising future applications, like space biomining, fungal bioleaching and biomining with hybrid biomaterials.

<span class="mw-page-title-main">Coal combustion products</span> By-products of coal combustion

Coal combustion products (CCPs), also called coal combustion wastes (CCWs) or coal combustion residuals (CCRs), are categorized in four groups, each based on physical and chemical forms derived from coal combustion methods and emission controls:

<span class="mw-page-title-main">Lithium iron phosphate</span> Chemical compound

Lithium iron phosphate or lithium ferro-phosphate (LFP) is an inorganic compound with the formula LiFePO
4. It is a gray, red-grey, brown or black solid that is insoluble in water. The material has attracted attention as a component of lithium iron phosphate batteries, a type of Li-ion battery. This battery chemistry is targeted for use in power tools, electric vehicles, solar energy installations and more recently large grid-scale energy storage.

<span class="mw-page-title-main">Battery recycling</span> Process

Battery recycling is a recycling activity that aims to reduce the number of batteries being disposed as municipal solid waste. Batteries contain a number of heavy metals and toxic chemicals and disposing of them by the same process as regular household waste has raised concerns over soil contamination and water pollution. While reducing the amount of pollutants being released through disposal through the uses of landfill and incineration, battery recycling can facilitate the release of harmful materials from batteries to both the environment and the workers recycling batteries.

<span class="mw-page-title-main">Environmental effects of mining</span> Environmental problems from uncontrolled mining

Environmental effects of mining can occur at local, regional, and global scales through direct and indirect mining practices. Mining can cause erosion, sinkholes, loss of biodiversity, or the contamination of soil, groundwater, and surface water by chemicals emitted from mining processes. These processes also affect the atmosphere through carbon emissions which contributes to climate change. Some mining methods may have such significant environmental and public health effects that mining companies in some countries are required to follow strict environmental and rehabilitation codes to ensure that the mined area returns to its original state. Mining can provide various advantages to societies, yet it can also spark conflicts, particularly regarding land use both above and below the surface.

Sulfolobus metallicus is a coccoid shaped thermophilic archaeon. It is a strict chemolithoautotroph gaining energy by oxidation of sulphur and sulphidic ores into sulfuric acid. Its type strain is Kra 23. It has many uses that take advantage of its ability to grow on metal media under acidic and hot environments.

<span class="mw-page-title-main">Lithium nickel manganese cobalt oxides</span> Lithium ion battery cathode material

Lithium nickel manganese cobalt oxides (abbreviated NMC, Li-NMC, LNMC, or NCM) are mixed metal oxides of lithium, nickel, manganese and cobalt with the general formula LiNixMnyCo1-x-yO2. These materials are commonly used in lithium-ion batteries for mobile devices and electric vehicles, acting as the positively charged cathode.

Mineral processing and extraction of metals are very energy-intensive processes, which are not exempted of producing large volumes of solid residues and wastewater, which also require energy to be further treated and disposed. Moreover, as the demand for metals increases, the metallurgical industry must rely on sources of materials with lower metal contents both from a primary and/or secondary raw materials. Consequently, mining activities and waste recycling must evolve towards the development of more selective, efficient and environmentally friendly mineral and metal processing routes.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Richardson, J. F.; Harker, J. H.; Backhurst, J. R. (2002), Richardson, J. F.; Harker, J. H.; Backhurst, J. R. (eds.), "CHAPTER 10 - Leaching", Chemical Engineering (Fifth Edition), Chemical Engineering Series, Butterworth-Heinemann, pp. 502–541, doi:10.1016/b978-0-08-049064-9.50021-7, ISBN   9780080490649
  2. 1 2 3 4 5 6 Tukey, H.B. (1970). "The Leaching of Substances from Plants". Annual Review of Plant Physiology. 21 (1): 305–324. doi:10.1146/annurev.pp.21.060170.001513. ISSN   0066-4294.
  3. 1 2 3 4 Dubus, I.G.; Beulke, S.; Brown, C.D. (2002). "Calibration of pesticide leaching models: critical review and guidance for reporting". Pest Management Science. 58 (8): 745–758. doi:10.1002/ps.526. ISSN   1526-4998. PMID   12192898.
  4. 1 2 3 4 5 6 Addiscott, T. M.; Wagenet, R. J. (1985). "Concepts of solute leaching in soils: a review of modelling approaches". Journal of Soil Science. 36 (3): 411–424. doi:10.1111/j.1365-2389.1985.tb00347.x. ISSN   1365-2389.
  5. 1 2 3 Bärlocher, Felix (2005), Graça, M.A.S.; Bärlocher, Felix; Gessner, M.O. (eds.), "CHAPTER 5 - Leaching", Methods to Study Litter Decomposition: A Practical Guide, Springer Netherlands, pp. 33–36, doi:10.1007/1-4020-3466-0_5, ISBN   9781402034664
  6. 1 2 3 4 5 6 Rohwerder, T.; Gehrke, T.; Kinzler, K.; Sand, W. (2003). "Bioleaching review part A: Progress in bioleaching: Fundamentals and mechanisms of bacterial metal sulfide oxidation". Applied Microbiology and Biotechnology. 63 (3): 239–248. doi:10.1007/s00253-003-1448-7. ISSN   1432-0614. PMID   14566432. S2CID   25547087.
  7. 1 2 3 4 5 6 Iyer, R. (2002). "The surface chemistry of leaching coal fly ash". Journal of Hazardous Materials. 93 (3): 321–329. doi:10.1016/S0304-3894(02)00049-3. ISSN   0304-3894. PMID   12137992.
  8. 1 2 Peelman, S.; Sun, Z.H.I.; Sietsma, J.; Yang, Y. (2016), "CHAPTER 21 - Leaching of Rare Earth Elements: Review of Past and Present Technologies", Rare Earths Industry, Elsevier, pp. 319–334, doi:10.1016/b978-0-12-802328-0.00021-8, ISBN   9780128023280 , retrieved 2019-10-17
  9. 1 2 3 4 5 6 7 Perket, C.L.; Webster, W.C. (1981). "Literature Review of Batch Laboratory Leaching and Extraction Procedures". In Conway, R.; Malloy, B. (eds.). Hazardous Solid Waste Testing: First Conference. (West Conshohocken, PA: ASTM International 1981): ASTM. pp. 7–7–21. doi:10.1520/stp28826s. ISBN   978-0-8031-0795-3. ISSN   1040-3094 – via in Hazardous Solid Waste Testing: First Conference.{{cite book}}: |journal= ignored (help)CS1 maint: location (link)
  10. 1 2 3 4 5 6 7 Prosser, A.P. (1996). "Review of uncertainty in the collection and interpretation of leaching data". Hydrometallurgy. 41 (2): 119–153. doi:10.1016/0304-386X(95)00071-N. ISSN   0304-386X.
  11. 1 2 Geankoplis, Christie (2004). Transport Process and Separation Principles. NJ: Pretence Hall. pp. 802–817. ISBN   978-0-13-101367-4.
  12. 1 2 "Kingston Fossil Plant coal fly ash slurry spill", Wikipedia, 2019-11-18, retrieved 2019-11-21
  13. ↑ Xiong, Yuting; Wang, Ling; Wang, Long; Li, Shen; Yang, Guohua; Cao, Chong; Liu, Shuxian; Nie, Yimiao; Jia, Lanbo (2023-07-01). "Optimization and kinetic analysis of direct acid leaching of vanadium from converter vanadium slag under atmospheric pressure". Minerals Engineering. 198: 108091. doi:10.1016/j.mineng.2023.108091. ISSN   0892-6875. S2CID   258423709.
  14. ↑ Balázs Illés, István; Kékesi, Tamás (2023-10-01). "Extraction of pure Co, Ni, Mn, and Fe compounds from spent Li-ion batteries by reductive leaching and combined oxidative precipitation in chloride media". Minerals Engineering. 201: 108169. doi: 10.1016/j.mineng.2023.108169 . ISSN   0892-6875.
  15. 1 2 Gu, Kunhong; Zheng, Weipeng; Ding, Bodong; Han, Junwei; Qin, Wenqing (2022-08-01). "Comprehensive extraction of valuable metals from waste ternary lithium batteries via roasting and leaching: Thermodynamic and kinetic studies". Minerals Engineering. 186: 107736. doi:10.1016/j.mineng.2022.107736. ISSN   0892-6875. S2CID   250639975.
  16. ↑ Li, Li; Jing Ge; Renjie Chen; Feng Wu; Shi Chen; Xiaoxiao Zhang (2010). "Environmental friendly leaching reagent for cobalt and lithium recovery". International Journal of Integrated Waste Management, Science and Technology. Waste Management. 30 (12): 2615–2621. doi:10.1016/j.wasman.2010.08.008. PMID   20817431 . Retrieved December 22, 2011.
  17. ↑ Li, Li; Jing Ge; Feng Wu; Renjie Chen; Shi Chen; Borong Wu (2010). "Recovery of cobalt and lithium from spent lithium ion batteries using organic citric acid as leachant". Journal of Hazardous Materials. 176 (1–3): 288–293. doi:10.1016/j.jhazmat.2009.11.026. PMID   19954882. S2CID   17075350.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.