NATO Joint Military Symbology is the NATO standard for military map symbols. Originally published in 1986 as Allied Procedural Publication 6 (APP-6), NATO Military Symbols for Land Based Systems, the standard has evolved over the years and is currently in its fifth version (APP-6D). The symbols are designed to enhance NATO's joint interoperability by providing a standard set of common symbols. APP-6 constituted a single system of joint military symbology for land, air, space and sea-based formations and units, which can be displayed for either automated map display systems or for manual map marking. It covers all of the joint services and can be used by them.
The first basic military map symbols began to be used by western armies in the decades following the end of the Napoleonic Wars. During World War I, there was a degree of harmonisation between the British and French systems, including the adoption of the colour red for enemy forces and blue for allies; the British had previously used red for friendly troops because of the traditional red coats of British soldiers. However, the system now in use is broadly based on that devised by the US Army Corps of Engineers in 1917. The infantry symbol of a saltire in a rectangle was said to symbolise the crossed belts of an infantryman, while the single diagonal line for cavalry was said to represent the sabre belt. With the formation of NATO in 1949, the US Army system was standardized and adapted, with different shapes for friendly (blue rectangle), hostile (red diamond) and unknown (yellow quatrefoil) forces.[1]
APP-6A was promulgated in December 1999. The NATO standardization agreement that covers APP-6A is STANAG 2019 (edition 4), promulgated in December 2000. APP-6A replaced APP-6 (last version, July 1986), which had been promulgated in November 1984 (edition 3 of STANAG 2019 covered APP-6), and was replaced in turn by Joint Symbology APP-6(B) (APP-6B) in 2008 (STANAG 2019 edition 5, June 2008) and NATO Joint Military Symbology APP-6(C) (APP-6C) in 2011 (STANAG 2019 edition 6, May 2011).
The U.S. is the current custodian of APP-6A, which is equivalent to MIL-STD-2525A.
Symbol sets
The APP-6A standard provides common operational symbology along with details on their display and plotting to ensure the compatibility, and to the greatest extent possible, the interoperability of NATO land component command, control, communications, computer, and intelligence (C4I) systems, development, operations, and training. APP-6A addresses the efficient transmission of symbology information through the use of a standard methodology for symbol hierarchy, information taxonomy, and symbol identifiers.
APP-6A recognises five broad sets of symbols, each set using its own SIDC (Symbol identification coding) scheme:
Units, equipment, and installations
Military operations (tactical graphics)
METOC (meteorological and oceanographic)
Signals intelligence
MOOTW (military operations other than war)
Units, equipment, and installations consist of icons, generally framed, associated with a single point on the map. All sorts of graphical and textual modifiers may surround them, specifying categories, quantities, dates, direction of movement, etc.
Tactical graphics represent operational information that cannot be presented via icon-based symbols alone: unit boundaries, special area designations, and other unique markings related to battlespace geometry and necessary for battlefield planning and management. There are point, line and area symbols in this category.
Meteorological and oceanographic symbology is the only set not under the standard's control: rather, they are imported from the symbology established by the World Meteorological Organization.
The signals intelligence and military operations other than war symbology sets stand apart from Units, Equipment, and Installations although they obey the same conventions (i.e., they consist of framed symbols associated to points on the map). They do not appear in APP-6A proper, having been introduced by MIL-STD-2525B.
Symbol composition
Most of the symbols designate specific points, and consist of a frame (a geometric border), a fill, a constituent icon, and optional symbol modifiers. The latter are optional text fields or graphic indicators that provide additional information.
The frame provides a visual indication of the affiliation, battle dimension, and status of an operational object. The use of shape and colour is redundant, allowing the symbology to be used under less-than-ideal conditions such as a monochrome red display to preserve the operator's night vision. Nearly all symbols are highly stylised and can be drawn by persons almost entirely lacking in artistic skill; this allows one to draw a symbolic representation (a GRAPHREP, Graphical report) using tools as rudimentary as plain paper and pencil.
The frame serves as the base to which other symbol components and modifiers are added. In most cases a frame surrounds an icon. One major exception is equipment, which may be represented by icons alone (in which case the icons are coloured as the frame would be).
The fill is the area within a symbol. If the fill is assigned a colour, it provides an enhanced (redundant) presentation of information about the affiliation of the object. If colour is not used, the fill is transparent. A very few icons have fills of their own, which are not affected by affiliation.
The icons themselves, finally, can be understood as combinations of elementary glyphs that use simple composition rules, in a manner reminiscent of some ideographic writing systems such as Chinese. The standard, however, still attempts to provide an "exhaustive" listing of possible icons instead of laying out a dictionary of component glyphs. This causes operational problems when the need for an unforeseen symbol arises (particularly in MOOTW), a problem exacerbated by the administratively centralised maintenance of the symbology sets.
When rendering symbols with the fill on, APP-6A calls for the frame and icon to be black or white (as appropriate for the display). When rendering symbols with the fill off, APP-6A calls for a monochrome frame and icon (usually black or in accordance with the affiliation colour). NATO symbols can also be rendered with fill off using a frame coloured according to affiliation and a black icon,[2] though this is not defined in any APP-6 standard.
Friendly mechanized infantry with fill on
Friendly mechanized infantry with fill off and monochrome colour frame and icon
Friendly mechanized infantry with fill off and monochrome frame and icon
Friendly mechanized infantry with fill off and bichrome frame and icon
Allegiance and affiliation
APP-6 colour representation
The concept of affiliation does not appear in the original APP-6 as these were not introduced until APP-6A. Instead, the original APP-6 described a series of "colour representations" with the purpose of distinguishing friendly and enemy elements.
Multi-colour representation:
Blue or black for friendly icons
Red for enemy icons
Green for man-made obstacles (friendly or enemy)
Yellow for chemical, biological, radiological or nuclear events
Other colours to be established in a map legend
Tri-colour representation:
Blue or black for friendly icons
Red for enemy icons
Green or yellow for man-made obstacles (friendly or enemy) and for chemical, biological, radiological or nuclear events
Two colour representation:
Blue, green, or black for friendly icons
Red for enemy icons
One colour representation:
Single line border for friendly icons
Double line border for enemy icons, and unbordered icons were labeled with "EN" to the lower right corner
APP-6 friendly unit (colour)
APP-6 enemy unit (colour)
APP-6 friendly unit (B&W)
APP-6 enemy unit (B&W)
APP-6A affiliation
Affiliation refers to the relationship of the tracker to the operational object being represented. The basic affiliation categories are unknown, friend, neutral, and hostile. In the ground unit domain, a yellow quatrefoil frame is used to denote unknown affiliation, a blue rectangle frame to denote friendly affiliation, a green square frame to denote neutral affiliation, and a red diamond frame to denote hostile affiliation.[3]:11 In the other domains (air and space, sea surface and subsurface, etc.), the same color scheme is used.
Style
Friendly
Hostile
Neutral
Unknown
Fill on
Monochrome (for digital media)
Monochrome (for print media)
The full set of affiliations is:
Pending (P)
Unknown (U)
Assumed friend (A)
Friend (F)
Neutral (N)
Suspect (S) (assumed hostile)
Hostile (H)
Exercise pending (G)
Exercise unknown (W)
Exercise assumed friend (M)
Exercise friend (D)
Exercise neutral (L)
Exercise suspect (J)
Exercise hostile (K)
There are no "assumed neutral" and "exercise assumed neutral" affiliations.
Battle dimension defines the primary mission area for the operational object within the battlespace. An object can have a mission area above the Earth's surface (i.e., in the air or outer space), on it, or below it. If the mission area of an object is on the surface, it can be either on land or sea. The subsurface dimension concerns those objects whose mission area is below the sea surface (e.g., submarines and sea mines). Some cases require adjudication; for example, an Army or Marine helicopter unit is a maneuvering unit (i.e., a unit whose ground support assets are included) and is thus represented in the land dimension. Likewise, a landing craft whose primary mission is ferrying personnel or equipment to and from shore is a maritime unit and is represented in the sea surface dimension. A landing craft whose primary mission is to fight on land, on the other hand, is a ground asset and is represented in the land dimension.
Closed frames are used to denote the land and sea surface dimensions, frames open at the bottom denote the air/space dimension, and frames open at the top denote the subsurface dimension.
Dimension
Friendly
Hostile
Neutral
Unknown
Air and space
Ground
Sea surface
Subsurface
An unknown battle dimension is possible; for example, some electronic warfare signatures (e.g., radar systems) are common to several battle dimensions and would therefore be assigned an "Unknown" battle dimension until further discrimination becomes possible. Special forces may operate in any dimension.
The full set of battle dimensions is, in ascending order of distance from Earth center:
The letter in parentheses is used by the symbol identification coding (SIDC) scheme – strings of 15 characters used to transmit symbols.
The space and air battle dimensions share a single frame shape. In the ground battle dimension, two different frames are used for the friendly (and assumed friendly) affiliations in order to distinguish between units and equipment. The SOF (special operations forces) are assigned their own battle dimension because they typically can operate across several domains (air, ground, sea surface and subsurface) in the course of a single mission; the frames are the same as for the ground (unit) battle dimension.[4]:47–48 The other battle dimension, finally, seems to be reserved for future use (there are no instances of its use as of 2525B Change 1).
Status
The status of a symbol refers to whether a warfighting object exists at the location identified (i.e., status is "present") or will in the future reside at that location (i.e., status is "planned, anticipated, suspected," or "on order"). Regardless of affiliation, present status is indicated by a solid line and planned status by a dashed line. The frame is solid or dashed, unless the symbol icon is unframed, in which case the icon itself is drawn dashed. Planned status cannot be shown if the symbol is an unframed filled icon.
Icon placement
The icon is the innermost part of a symbol which, when displayed, provides an abstract pictorial or alphanumeric representation of an operational object. The icon portrays the role or mission performed by the object. APP-6A distinguishes between icons that must be framed or unframed and icons where framing is optional.[3]:39–43 APP-6A defined a standard octagon boundary within each map symbol frame. This octagon is not actually shown when symbols are drawn or rendered but, with a few defined exceptions, all icons inside the frame would also fit inside these octagons. APP-6C modified some symbol frames from previous editions of the standard. From top to bottom, here is the symbol boundary shown inside the APP-6C frames of space elements, air elements, land units, land equipment and surface sea elements, and sub-surface sea elements.
Unit symbols
Unit icon modifiers
Unit symbols can be used independently as well as in combinations. There are also some symbols that cannot appear by themselves, but can only be used to modify other unit symbols:
The typical commander ranks shown in the table are for illustration. Neither the actual rank designated for a particular unit's commander, nor the rank held by the incumbent commander alters the appropriate symbol. For example, units are periodically commanded by an officer junior to the authorised commander grade, yet a company under the command of a lieutenant (U.S.) or captain (Commonwealth) is still indicated with two vertical ticks. Likewise, some peculiar types of companies and detachments are authorised a major, lieutenant colonel (personnel services companies) or colonel (some types of judge advocate detachments); the company or detachment is nevertheless indicated with, respectively, one vertical tick or three dots.
While in Commonwealth armies, the regiment as a tactical formation does not normally exist, in some cases a regimental sized (i.e. larger than battalion and smaller than brigade) task force may exist where the operational requirement exists. These formations may be commanded by colonels.
Note that, for brigades and higher, the number of Xs corresponds to the number of stars in the United States military's insignia for the typical general officer grade commanding that size unit. For example, a division is capped with XX and is usually commanded by a major general the American insignia for which is two stars.
APP-6A stops with field AB. MIL-STD-2525B and 2525B Change 1 add a number of other modifiers.
Positions of the various graphic modifiers around the symbol (itself field A). MIL-STD-2525B Change 1 fails to specify where to place fields AD, AE, and AF.
Graphic modifiers
Echelon (field B) Identifies command level (see Unit sizes, above).
Task force (field D) Identifies a unit as a task force. It may be used alone or in combination with echelon, like so:
Frame shape modifier (field E) A short textual modifier that completes the affiliation, battle dimension, or exercise description of an object ("U", "?", "X", "XU", "X?", "J" or "K"). It is treated as a graphic modifier, however.
Direction of movement (field Q) A fixed-length arrow that identifies the direction of movement or intended movement of an object. It emanates from the symbol's centre except in the ground domain, where it is hooked to a short offset, straight down from the symbol's base centre (see diagram).
Mobility indicator (field R) Depicts the mobility of an object. It is used only with equipment.
Headquarters staff or offset location (field S) Identifies a unit as a headquarters, or indicates the object's actual location on the map when it has been shifted away in order to declutter the display. It goes straight down from the symbol's centre left, then angles towards the actual location (see diagram).
Feint/dummy (field AB) Identifies a unit intended to draw the enemy's attention away from the area of the main attack, or a decoy designed to fool enemy intelligence. It consists of a dashed chevron, placed above the frame, like the echelon graphic modifier (the standard is unclear as to how the two combine graphically).
Installation (field AC) Identifies a particular symbol as an installation. It sits atop the frame.
Auxiliary equipment (field AG) Indicates the presence of a towed sonar array (used exclusively in the sea surface or subsurface battle dimensions). It sits below the frame, like field R.
Area of uncertainty (field AH) Indicates the area where an object is most likely to be, based on the object's last report and the reporting accuracy of the sensor that detected it. This can take various forms, such as an ellipse, a bounding box, or lines indicating probable bearing and distance.
Dead reckoning trailer (field AI) Identifies where an object should be located at present, given its last reported course and speed. This can take the form of a dotted line (extending from the symbol to the dead-reckoned position) or a dotted circle (bounding the zone the object may have reached since, when the direction of movement is unknown or uncertain).
Speed leader (field AJ) Depicts the speed and direction of movement of an object. It is identical to the direction of movement indicator except that its length is variable (and there is no arrow head).
APP-6A, Military Symbols for Land Based Systems was developed directly from MIL-STD-2525A, Common Warfighting Symbology. MIL-STD 2525A was the American standard for military symbols. The custodian of APP-6 is the United States. APP-6(A) remained unchanged as work on harmonizing it with ADatP-3, NATO Message Text Formatting System was carried out. In 1999, APP-6 was moved from the Army Service Board to the Joint Service Board. With this move, APP-6 was placed under the Information Exchange Requirements Harmonization/Message Text Format Working Group. The IERH/MTFWG then formed the Joint Symbology Panel to provide configuration management of APP-6 with the US custodian as the chairman. With the ratification and promulgation of APP-6(B) in 2008, the named was changed to NATO Military Symbology to better reflect the nature of the publication. In 2011, with the introduction of APP-6(C), the named was changed to NATO Joint Military Symbology. The US military required new symbols to support ongoing operations in Iraq and Afghanistan, so the pace of change between APP-6 and MIL-STD-2525 remained uneven until 2009. In 2009, a new chairman for DOD Symbology Standardization Management Committee was appointed, and the two configuration management organizations began to work together. The two organizations held joint meetings with full participation on both sides. The goal of both groups is to develop comprehensive joint military symbology that is common to both organizations to the greatest extent possible. APP-6(C) began the process of changing the format of the publications and introduced new symbol identification codes. MIL-STD-2525D[10] has carried that one step further with more symbols and more symbol sets derived from recent NATO and US operations. MIL-STD-2525D will serve as the base document for APP-6(D) as the two documents move closer together.
MIL-STD-188 is a series of U.S. military standards relating to telecommunications.
In NATO, a standardization agreement defines processes, procedures, terms, and conditions for common military or technical procedures or equipment between the member countries of the alliance. Each NATO state ratifies a STANAG and implements it within its own military. The purpose is to provide common operational and administrative procedures and logistics, so one member nation's military may use the stores and support of another member's military. STANAGs also form the basis for technical interoperability between a wide variety of communication and information systems (CIS) essential for NATO and Allied operations. The Allied Data Publication 34 (ADatP-34) NATO Interoperability Standards and Profiles which is covered by STANAG 5524, maintains a catalogue of relevant information and communication technology standards.
A company is a military unit, typically consisting of 100–250 soldiers and usually commanded by a major or a captain. Most companies are made up of three to seven platoons, although the exact number may vary by country, unit type, and structure.
In military terminology, a squad is among the smallest of military organizations and is led by a non-commissioned officer. NATO and U.S. doctrine define a squad as an organization "larger than a team, but smaller than a section." while U.S. Army doctrine further defines a squad as a "small military unit typically containing two or more fire teams." In American usage, a squad consists of eight to fourteen soldiers, and may be further subdivided into fireteams.
In military organizations, an artillery battery is a unit or multiple systems of artillery, mortar systems, rocket artillery, multiple rocket launchers, surface-to-surface missiles, ballistic missiles, cruise missiles, etc., so grouped to facilitate better battlefield communication and command and control, as well as to provide dispersion for its constituent gunnery crews and their systems. The term is also used in a naval context to describe groups of guns on warships.
A section is a military sub-subunit. It usually consists of between 6 and 20 personnel. NATO and U.S. doctrine define a section as an organization "larger than a squad, but smaller than a platoon." As such, two or more sections usually make up an army platoon or an air force flight.
Symbology concerns the study of symbols.
Link 16 is a military tactical data link network used by NATO members and other nations, as allowed by the MIDS International Program Office (IPO). Its specification is part of the family of Tactical Data Links.
A United States defense standard, often called a military standard, "MIL-STD", "MIL-SPEC", or (informally) "MilSpecs", is used to help achieve standardization objectives by the U.S. Department of Defense.
Military organization (AE) or military organisation (BE) is the structuring of the armed forces of a state so as to offer such military capability as a national defense policy may require. Formal military organization tends to use hierarchical forms.
Blue force tracking is a United States military term for a GPS-enabled capability that provides military commanders and forces with location information about friendly military forces. In NATO military symbology, blue typically denotes friendly forces. The capability provides a common picture of the location of friendly forces and therefore is referred to as the blue force tracker. When all capitalized, the term refers to a specific defense contractors' system, but the capability is found in many military and civilian mobile apps.
MIL-STD-129 standard is used for maintaining uniformity while marking military equipment and supplies that are transported through ships. This standard has been approved to be used by the United States Department of Defense and all other government agencies. Items must be marked for easy identification before they are transported. The marking helps the military personnel to fill the necessary requisition, when a particular stock goes short of the balance level.
A field army is a military formation in many armed forces, composed of two or more corps. It may be subordinate to an army group. Air armies are the equivalent formations in air forces, and fleets in navies. A field army is composed of 80,000 to 300,000 soldiers.
The NATO Accessory Rail (NAR), defined by NATO Standardization Agreement (STANAG) 4694, is a rail interface system standard for mounting accessory equipment such as telescopic sights, tactical lights, laser aiming modules, night vision devices, reflex sights, foregrips, bipods and bayonets to small arms such as rifles and pistols.
A map symbol or cartographic symbol is a graphical device used to visually represent a real-world feature on a map, working in the same fashion as other forms of symbols. Map symbols may include point markers, lines, regions, continuous fields, or text; these can be designed visually in their shape, size, color, pattern, and other graphic variables to represent a variety of information about each phenomenon being represented.
Android Team Awareness Kit (ATAK) is an Android smartphone geospatial infrastructure and military situation awareness app. It allows for precision targeting, surrounding land formation intelligence, situational awareness, navigation, and data sharing. This Android app is a part of the larger TAK family of products. ATAK has a plugin architecture which allows developers to add functionality. This extensible plugin architecture that allows enhanced capabilities for specific mission sets.
Sub-subunit or sub-sub-unit is a subordinated element below platoon level of company-sized units or sub-units which normally might not be separately identified in authorization documents by name, number, or letter. Fireteams, squads, crews, sections and patrols are typically sub-subunits.
A Staffel is a military organization in German-speaking militaries.
A combat team is temporary grouping of military organizations of differing types to accomplish a defined mission or objective. Usage varies between commonwealth nations, where the term applies to a sub-unit level grouping, and the United States, where the term is found at unit and formation levels.
The Army Nomenclature System is a nomenclature system used by the US Army for giving type designations to its materiel. It is based on MIL-STD-1464A which was released in 1981 and most recently revised on February 22, 2021.
symbol.army—Web application to create military symbology according to MIL-STD-2525C
map.army—Web application providing functions to draw, save, export and exchange Military Map Overlays according to MIL-STD-2525C.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
