ASLAV | |
---|---|
Type | Reconnaissance vehicle |
Place of origin | Australia/Canada |
Service history | |
In service | 1995–present |
Used by | Australian Army |
Wars | Iraq War, Afghanistan, East Timor |
Production history | |
Designer | General Dynamics Land Systems |
Designed | 1992–1994 |
Manufacturer | General Motors Diesel & General Dynamics Land Systems–Australia |
Unit cost | A$2.2M |
Produced | 1995–2007 |
No. built | 257 |
Variants | See variants |
Specifications | |
Mass | 13.2 t (13.0 long tons) |
Length | 6.53 m (21.4 ft) |
Width | 2.62 m (8.6 ft) |
Height | 2.69 m (8.8 ft) |
Crew | 3 |
Passengers | 6 |
Main armament | M242 25mm Bushmaster Chain Gun 210 rounds |
Secondary armament | FN MAG 58 7.62 mm machine gun 1000 rounds |
Engine | Detroit Diesel 6V-53T 205 kW (275 hp) |
Power/weight | 15.53 kW/tonne |
Drive | Wheeled 8x8 |
Transmission | Allison MT653 |
Operational range | 660 km (410 mi) |
Maximum speed | 100 km/h (62 mph) 10 km/h (6.2 mph) on water |
References | Australian Army [1] & Jane's [2] |
The Australian Light Armoured Vehicle (ASLAV) is an eight-wheeled amphibious armoured reconnaissance vehicle of the LAV II family used by the Australian Army. [3] It was built by General Dynamics Land Systems Canada, and developed from the U.S. Marine Corps' LAV-25 and Canadian Army's Bison armoured fighting vehicles.
The ASLAV is a highly mobile, eight-wheel drive, amphibious armoured fighting vehicle that can be deployed by land, sea or air, in Royal Australian Air Force C-130s or C-17s. It is fitted with GPS, an intra-vehicular navigation system and a radio harness capable of supporting HF, VHF, UHF and digital radios. [1] [4]
The ASLAV is capable of speeds of 100 km/h (62 mph) and has a maximum range in excess of 660 km (410 mi). The eight-wheel drive provides excellent cross-country mobility and redundancy. The vehicle is capable of operation with only four working wheels, and can continue to operate with eight punctured tyres through the use of solid-core run-flat tyres. It is fully amphibious and is driven in the water by permanent shrouded propellers located at the rear of the hull at speeds of up to 10 km/h (6.2 mph). [1] [4]
The ASLAV fleet comprises a number of specialist purpose-designed variants built in three distinct hull configurations. [2] [4] [5]
The ASLAV Type I is the most numerous type. It is a turreted vehicle derived from the LAV-25 and comes in only one variant. [2] [5]
The ASLAV Type II has no turret and greater internal capacity and is derived from the Canadian Bison Armoured Personnel Carrier. The ASLAV Type II has a crew of two (commander and driver) and is armed with a pintle-mounted M2 12.7 mm machine gun. In a number of vehicles, the standard machine gun pintle mount is replaced by a Kongsberg Protector remote weapon station (RWS), which can accommodate either a 12.7 mm machine gun or a Mk 19 40 mm automatic grenade launcher. Using a common hull design installed with interchangeable Mission Role Installation Kits (MRIKs), it can be converted into any one of four variants. [2] [5]
The ASLAV Type III has no turret and is used by members of the Royal Australian Electrical and Mechanical Engineers for repair and recovery. The ASLAV Type III has a crew of two (commander and driver) and usually carries a third mechanic. It is armed with a pintle-mounted FN MAG 58 7.62 mm machine gun, although some have been fitted with the Kongsberg Protector RWS. The ASLAV Type III comes in two variants utilising two specialist MRIKs. [2] [5]
The acquisition of the ASLAV family of vehicles for the Australian Army was managed by Defence Materiel Organisation under the multi-phased LAND 112 project. [5] [2] [6] The vehicles were similar to those considered by the Australian Army to replace its M113 armoured personnel carriers in the early 1980s under Project Waler. [7]
In April 1989, the Australian Army purchased 15 ex-United States Marine Corps LAV-25 vehicles at a cost of A$28.4 million under LAND 112 Phase 1. These vehicles were purchased to trial the Wheeled Armoured Fighting Vehicle (WAFV) concept in northern Australia. The trials were conducted by the 2nd Cavalry Regiment in 1990–1991. The subsequent report endorsed the WAFV concept, and the Army determined that the LAV was the best vehicle to fulfil the intended role of armoured reconnaissance and surveillance. [5] [2] [6]
In December 1992, Defence contracted the Canadian Commercial Corporation to supply 97 improved ASLAV Phase 2 vehicles under LAND 112 Phase 2, at a cost of A$123.84 million. These 97 vehicles were built in Canada by the Diesel Division of General Motors of Canada, with final fitting performed in Australia by Tenix Defence. The first vehicles were completed in 1994. In June 1995, the scope was broadened to include replacements for the Phase 1 vehicles. In total 113 vehicles were purchased under Phase 2, with all vehicles being delivered to the 2nd Cavalry Regiment in Darwin and the School of Armour at Puckapunyal over the period 1995–1997. [5] [2] [6]
In December 1997, the Australian government approved the acquisition of an additional 150 vehicles, later amended to 144. Under LAND 112 Phase 3, the initial contract with the Canadian Commercial Corporation was amended at a cost of A$286.37 million for an additional 144 newly built, improved Phase 3 ASLAVs, an upgrade of the Phase 2 fleet to Phase 3 standard and the provision of supporting ancillary equipment. The Phase 3 vehicles had enhanced offensive capabilities and crew protection, including new electric turret drives, improved thermal sights, integrated laser range finder, a second generation drive line and new suspension components. [5] [6]
In the preparations for deployment to Iraq in 2003, 10 ASLAV Type IIs and Type IIIs were fitted with the Kongsberg Protector RWS. In total 59 systems were acquired from Kongsberg for A$17.9 million and fitted to vehicles operating in Iraq and Afghanistan. Further upgrades to crew protection for vehicles deployed to Iraq occurred with the fitting of bar armour and internal spall liners to better withstand blasts, small-arms hits and fragmentation. [5] [6]
The ASLAV is to be replaced in Australian Army service by the Boxer Combat Reconnaissance Vehicle, under LAND 400 Phase 2, with deliveries expected from 2020. [8]
In the Australian Army, the ASLAV equips the Cavalry Squadrons of the Royal Australian Armoured Corps. A Cavalry Squadron comprises a headquarters element, an echelon and three sabre troops of six ASLAVs each. Each troop is further broken down into two patrols, each comprising two ASLAV-25s and one ASLAV-PC. [9]
The ASLAV equips two squadrons from each of the Australian Army's Armoured Cavalry Regiments, the 1st Armoured Regiment in Adelaide, the 2nd Cavalry Regiment in Townsville, and the 2nd/14th Light Horse Regiment (Queensland Mounted Infantry) in Brisbane, as well as the School of Armour at Puckapunyal. [10] [11] [12]
The Australian Army's ASLAV fleet saw continual operational service from 1999 to 2013. [6] [13]
On 21 September 1999, C Squadron, 2nd Cavalry Regiment deployed 22 ASLAVs into Dili aboard HMAS Tobruk as a part of International Force East Timor, a further seven ASLAVs being deployed later to East Timor as a part of the commitment. The vehicles were used for a variety of tasks, including convoy escort, surveillance, reconnaissance, communications, search, vehicle check points and force presence. [13] [14]
From 2003 to 2009, the Australian Army deployed ASLAVs to Iraq with its commitment to the Iraq War. The vehicles were used as a part of the SECDET rotations in Baghdad, as well as AMTG and the subsequent OBG(W) rotations in Dhi Qar Governorate. In 13 April 2004, the first Australian engagement of the ASLAV's 25 mm main armament against enemy elements occurred when an ASLAV from SECDET engaged an enemy mortar base plate that was in the process of firing mortars into the Baghdad Green Zone. [15]
From 2006 to 2013, the Australian Army deployed ASLAVs to Afghanistan with its commitment to the War in Afghanistan. Predominantly deployed to Urozgan Province, the vehicles were used as part of the Reconstruction Task Force (RTF), Mentoring and Reconstruction Task Force (MRTF) and Mentoring Task Force (MTF) rotations, as well as supporting Special Forces Task Group (SFTG) rotations. [4] [16] [17]
The Stryker is a family of eight-wheeled armored fighting vehicles derived from the Canadian LAV III. Stryker vehicles are produced by General Dynamics Land Systems-Canada (GDLS-C) for the United States Army in a plant in London, Ontario. It has four-wheel drive (8×4) and can be switched to all-wheel drive (8×8).
The Mowag Piranha is a family of armoured fighting vehicles designed by the Swiss company Mowag.
The Combat Vehicle Reconnaissance (Tracked), abbreviated CVR(T), is a family of armoured fighting vehicles (AFVs) developed in the 1960s and is in service with the British Army and others throughout the world. They are small, highly mobile, air-transportable armoured vehicles, originally designed to replace the Alvis Saladin armoured car.
The FV101 Scorpion is a British armoured reconnaissance vehicle, and also a light tank. It was the lead vehicle and the fire support type in the Combat Vehicle Reconnaissance (Tracked), CVR(T), family of seven armoured vehicles. Manufactured by Alvis, it was introduced into service with the British Army in 1973 and was withdrawn in 1994. More than 3,000 were produced and used as a reconnaissance vehicle or a light tank.
The FV107 Scimitar is an armoured tracked military reconnaissance vehicle formerly used by the British Army, until it was retired from active service in April 2023. It was manufactured by Alvis in Coventry. It is very similar to the FV101 Scorpion, but mounts a high-velocity 30 mm L21 RARDEN cannon instead of a 76 mm gun. It was issued to Royal Armoured Corps armoured regiments in the reconnaissance role. Each regiment originally had a close reconnaissance squadron of five troops, each containing eight FV107 Scimitars. Each Main Battle Tank Regiment also employed eight Scimitars in the close reconnaissance role.
The LAV II Bison and Coyote are armoured cars built by General Dynamics Land Systems Canada for the Canadian Armed Forces. It is based on the Mowag Piranha 8x8.
The Royal Australian Armoured Corps (RAAC) is an administrative corps of the Australian Army. It provides the Australian Defence Force's Armour capability, which performs the function of mounted combat. Armour combines firepower, mobility, protection and networked situational awareness to generate shock action and overmatch in close combat. Armour is an essential element of the combined arms approach that is employed by the Australian Army.
1st Armoured Regiment is an armoured regiment of the Australian Army and is the senior regiment of the Royal Australian Armoured Corps. Formed as a tank unit in the new Australian Regular Army on 7 July 1949, the regiment subsequently saw service during the Vietnam War operating Centurion tanks. Currently the unit is based in Edinburgh, South Australia as part of the 9th Brigade. As part of the Plan Beersheba reorganisation, the unit has become one of three Armoured Cavalry Regiments (ACRs) assigned to the Army's multirole combat brigades in Brisbane, Darwin and Townsville. Each ACR is equipped with M1A1 tanks and ASLAV light armoured vehicles.
The 2nd Cavalry Regiment is an armoured cavalry regiment of the Australian Army. Formed in 1965 as the "1st Cavalry Regiment", it is the second most senior regiment in the Royal Australian Armoured Corps. In 1970, the regiment was redesignated as the "2nd Cavalry Regiment", to differentiate it from the 1st Armoured Regiment. The regiment was based at Holsworthy until 1992 when it was allocated to the 1st Brigade based in Darwin in the Northern Territory. In late 2014 the regiment was transferred to the 3rd Brigade, and is now based in Townsville in Queensland. The unit is equipped with M1A1 tanks, ASLAV light armoured vehicles and M113AS4 APCs.
The 3rd/4th Cavalry Regiment is an armoured unit within the Australian Army's Royal Australian Armoured Corps. Formed in 1981 with the amalgamation of the 3rd Cavalry Regiment and the 4th Cavalry Regiment, from 1986 to 2014 the unit consisted of an independent squadron, B Squadron 3rd/4th Cavalry Regiment, within the 3rd Brigade in Townsville, Queensland. From 2017, B Squadron 3rd/4th Cavalry Regiment has been the training support and logistics squadron within the School of Armour at Puckapunyal in Victoria.
The Humber Armoured Car was one of the most widely produced British armoured cars of the Second World War. It supplemented the Humber Light Reconnaissance Car and remained in service until the end of the war.
The LAV III is the third generation of the Light Armoured Vehicle (LAV) family of armored personnel carriers built by General Dynamics Land Systems – Canada (GDLS-C), a London, Ontario, based subsidiary of General Dynamics. It first entered service in 1999, succeeding the LAV II. It is the primary mechanized infantry vehicle of both the Canadian Army and the New Zealand Army. It also forms the basis of the Stryker vehicle used by the U.S. Army and other operators. The Canadian Army is upgrading its LAV IIIs to the LAV 6 standard. Early in its development history it was referred to as the 'Kodiak', but the name was never officially adopted.
The LAV-25 is a member of the LAV II family. It is an eight-wheeled amphibious armored reconnaissance vehicle built by General Dynamics Land Systems and used by the United States Marine Corps and the United States Army.
The 2nd/14th Light Horse Regiment is a regiment of the Australian Army and forms part of the Royal Australian Armoured Corps. The regiment is an Australian Light Horse unit, and has been widely romanticised and popularised in literature and poetry throughout the 20th century. The unit sentimentally traces its lineage to 1860 and is the oldest Australian Regular Army unit through antecedent units the 2nd Moreton Light Horse (QMI) and the 14th West Moreton Light Horse (QMI). The regiment is assigned to 7th Brigade based in Brisbane and is equipped with the M1A1 Abrams tank and the ASLAV reconnaissance vehicle.
Armoured reconnaissance is the combination of terrestrial reconnaissance with armoured warfare by soldiers using tanks and wheeled or tracked armoured reconnaissance vehicles. While the mission of reconnaissance is to gather intelligence about the enemy with the use of reconnaissance vehicles, armoured reconnaissance adds the ability to fight for information, and to have an effect on and to shape the enemy through the performance of traditional armoured tasks.
The Freccia is an Italian 8x8 wheeled Infantry fighting vehicle in use with the Italian Army. The first batch of 249 vehicles were ordered to replace Cold War VCC-2 armoured personnel carriers of the Mechanized Brigade "Pinerolo" in Southern Italy. The Freccia is built by a consortium combining Iveco and Oto Melara (armament).
The Australian Army has operated M113 armoured personnel carriers since 1964. An initial pair of M113s was purchased for trials purposes in 1962. Either 817 or 840 were acquired by 1979, comprising nine different variants. A long-running modernisation program that commenced in the 1990s resulted in 431 M113s being upgraded between 2007 and 2012. All of the upgraded M113s remain in service as of 2020.
The Light Armoured Vehicle (LAV) is a series of armoured vehicles built by General Dynamics Land Systems – Canada (GDLS-C), a London, Ontario-based subsidiary of General Dynamics. It is a license-produced version of the Mowag Piranha. The first generation of LAV was created by Mowag for the Armoured Vehicle General Purpose (AVGP) requirement of the Canadian Army. This was a 6x6 variant of the Piranha I produced by General Motors Diesel in London, Ontario. Since entering service in 1976, it has undergone a number of upgrades. The LAV II introduced the now-familiar 8x8 configuration. The LAV continues to form the backbone of the Canadian Army's combat vehicle fleet. The LAV series of vehicles exist in a number of different variants and are used in a number of different roles such as armoured personnel carriers, engineering vehicles, command posts, ambulances and armoured recovery vehicles.
The LAV 6, sometimes written as LAV 6.0 or LAV VI, is the fourth generation of LAV, and is based on the LAV III. The first vehicles were delivered in 2013 and after testing entered service in 2016. The Canadian Army plans to replace its entire LAV fleet of various LAV II and LAV III variants with the LAV 6. The vehicle is being acquired in two main variants: a fighting vehicle equipped with the 25mm cannon seen on the LAV II and LAV III, and a support variant labelled the Armoured Combat Support Vehicle (ACSV).
The LAV II is the second generation of the Light Armoured Vehicle (LAV) family. The LAV II is an 8×8 vehicle unlike the 6×6 Armoured Vehicle General Purpose, which is a LAV based on the Piranha I. The United States Marine Corps was the first user of the LAV II, which it calls the LAV-25. Canada procured two main variants: the Coyote Reconnaissance Vehicle and the Bison armoured utility vehicle. LAV IIs in Australia are known as the ASLAV.