Fahd 240/280 | |
---|---|
Type | Armored personnel carrier |
Place of origin | Egypt |
Service history | |
In service | 1986–present |
Used by | See below |
Wars | Persian Gulf War Somali Civil War |
Production history | |
Designer | Thyssen Henschel (today Rheinmetall Landsysteme and part of Rheinmetall Defence) |
Manufacturer | Kader Factory for Developed Industries |
Produced | 1985 |
No. built | Over 1,907 (all variants , most users) |
Variants | Mainly Fahd 240, and Fahd 280-30. See text for extended list. |
Specifications | |
Mass | 10.9 - 12.5 tons (depending on the variant) |
Length | 6 meters |
Width | 2.45 meters |
Height | 2.25 meters (without towers) |
Crew | 2 + 10 passengers (Fahd-240), 3 + 7 passengers (Fahd-280-30) |
Armor | Welded steel |
Main armament | 30 mm automatic cannon 2A42 AT-5 Spandrel or AT-4 Spigot ATGM (Fahd-280-30) |
Secondary armament | 1-3 7.62 mm machine guns |
Engine | Mercedes-Benz Diesel OM 366 LA 4-Stroke turbo-charged water-cooled diesel engine 275 hp at 2,300 rpm |
Suspension | 4 x 4 |
Ground clearance | 37 cm |
Fuel capacity | 280 liters |
Operational range | 700 km (on road) 450 km (cross country) |
Maximum speed | 100 km/h (on road) 60 km/h (cross country) |
The Fahd is a 4x4 Egyptian armored personnel carrier, designed to fit the requirements of the Egyptian Military. It replaced older APCs in Egyptian service such as the BTR-40, and the Walid (called Waleed in Egypt). [1] It has been used by the United Nations. [2]
The flexible design of the vehicle, its high speed, maneuverability and long range, on road and off-road, makes it possible to produce various versions to satisfy various military and security purposes. Variants include the Fahd 240/280 APC, Fahd 280-30 IFV, a command post vehicle, ambulance vehicle, light armored recovery vehicle, and can be used for anti-riot purposes, mine laying and mine dispensing purposes, making it possible to form independent units capable of dealing with different threats of armor, low-flying targets, and personnel, with common repair duties, and operation. [3] [4] The Fahd consists of a Mercedes-Benz LAP 1117/32 truck (4 × 4) chassis fitted with an armored body. It has a usual APC configuration of placing the driver and the commander on the front, and a large box-like shape, similar to the German Fuchs. [1]
The hull of the Fahd is of all-welded steel armor construction giving complete protection against attack by 7.62 mm caliber AP rounds and shell splinters. The vehicle is equipped with air conditioning. The driver sits at the front of the vehicle on the left side with the commander to the right. Both have forward observation via large bulletproof windows, which can be rapidly covered by an armored shutter hinged at the top, and a side door that opens to the front, featuring a window in its upper part that can also be covered by a shutter as well. Above the commander's position is a single-piece, rear-opening hatch cover. The driver has a forward-facing, roof-mounted day periscope, which can be replaced by a passive periscope for night driving. The troop compartment is at the rear of the hull with the infantry entering via a door in the rear, the upper part of which folds upwards and the lower part downwards to form a step. Over the top of the troop compartment are two rectangular roof hatches hinged in the center that can be locked vertically. The infantry sits on individual bucket seats down the center of the vehicle facing outwards. In either side of the troop compartment are four firing ports with a vision block above so that the troops can fire their weapons from within the vehicle. Either side of the rear door has a firing port with a vision block above. Optional equipment may be fitted on the vehicle, such as an NBC protection system and passive IR among others. [1]
Up to three weapons may be fitted on to the roof of the Fahd, one on each side of the roof hatches and one to the rear. The armament usually consists of three PK machine guns, each with 1,500 7.62 mm rounds, but other 7.62 mm machine guns can be fitted on the vehicle, such as the FN MAG. [5]
The Fahd APC has a top speed of 100 km/h (62 mph) on-road with a range of 700 km. It has average speed of 65 km/h (40 mph) off-road with a range of 450 km. The engine is a Mercedes-Benz Diesel OM 366 LA 4-Stroke turbocharged water-cooled diesel engine, capable of providing 280 hp at 2,200 rpm. The vehicle is able to negotiate slopes up to 80%, and side slopes up to 30%, trenches with a width of up to 0.8 m, and vertical obstacle with a maximum height of 0.5 m, and it has a steering radius of 8 m. [5]
The Fahd APC is relatively lighter, smaller, and better armed than other modern wheeled APCs and IFVs[ citation needed ] such as the BTR-90 which weighs 20.9 tons, about twice the weight of the Fahd, yet provides similar armament. [6] [ failed verification ] A LAV-25 costs 900,000 US dollars, and carries less passengers. [7]
Below is a comparison of some modern wheeled IFVs including the Fahd:
Fahd 280-30 [5] [8] | BTR-3U [9] | VBCI [10] [ unreliable source? ] | LAV-25 [7] | Type-92 IFV [11] | BTR-90 [12] [13] | VBM Freccia [14] | |
---|---|---|---|---|---|---|---|
Country of origin | Egypt | Ukraine | France | Canada | China | Russia | Italy |
Weight | 12.5 t (13.8 short tons) | 16.4 t (18.1 short tons) | 26 t (29 short tons) | 12.8 t (14.1 short tons) | 12.5 t (13.8 short tons) | 20.9 t (23.0 short tons) | 26 t (29 short tons) |
Primary armament | 30 mm (1.2 in) 2A42 automatic cannon | 30 mm (1.2 in) dual-feed cannon | 25 mm NATO dual-feed cannon | 25 mm NATO M242 chain gun | 25 mm (0.98 in) Autocannon | 30 mm (1.2 in) 2A42 automatic cannon | 25 mm (0.98 in) Oerlikon KBA |
Secondary armament | 7.62 mm (0.300 in) FN MAG machine gun | 7.62 mm (0.300 in) coaxial machine gun | 7.62 mm (0.300 in) coaxial machine gun | 2 x 7.62 mm (0.300 in) M240 machine gun | 7.62 mm (0.300 in) coaxial machine gun | 7.62 mm (0.300 in) PKT machine gun grenade launcher | 7.62 mm (0.300 in) coaxial machine gun |
Missile armament (range) | AT-5 Spandrel (70-4,000 meters) | AT-5 Spandrel (70-4,000 meters) | - | - | - | AT-5 Spandrel (70-4,000 meters) | Spike LR (200–4000 meters) |
Road range | 700 km (430 mi) | 600 km (370 mi) | 750 km (470 mi) | 660 km (410 mi) | 800 km (500 mi) | 800 km (500 mi) | 800 km (500 mi) |
Maximum on-road speed | 100 km/h (62 mph) | 85 km/h (53 mph) | 100 km/h (62 mph) | 100 km/h (62 mph) | 85 km/h (53 mph) | 100 km/h (62 mph) | 110 km/h (68 mph) |
Maximum capacity | 3 crew + 7 passengers | 3 crew + 6 passengers | 2 crew + 9 passengers | 3 crew + 6 passengers | 3 crew + 9 passengers | 3 crew + 7 passengers | 3 crew + 8 passengers |
The Fahd 240 is based upon the latest Mercedes-Benz LAP 1424/32 chassis. This variant includes a far more powerful engine and a slight increase in armor. It has the same engine as the Fahd. All original Fahds have been updated to this standard, and it is the main variant in service with the Egyptian Army. [4] It weighs 11.6 tons. The seating arrangement and design characteristics are similar to the original Fahd APC. It has a crew of two and can carry ten soldiers. On top of the passenger compartment are two large roof hatches, hinged at the center of the vehicle. They sit facing outward down the center of the vehicle. Each passenger has a firing port, giving four ports on either side of the vehicle. The armament is similar to the original Fahd. [1] [5]
Maximum arm length | Four meters |
Maximum angle of boom elevation | 70 degree |
Angle of traverse | 315 |
Slewing speed | 1.5 r.p.m |
Boom specifications [16] | |
---|---|
Lifting capability (ton) | Boom length (meter) |
2 | 2.0 vehicle stopped |
1.5 | 2.7 at stop |
1 | 4.0 at stop |
1 | 2.7 with a speed of 15–20 km/h |
0.65 | 4.0 with a speed of 15–20 km/h |
Based on the latest production Fahd-240, it shares the position and entry doors for the commander and the driver with the APC variant. A 2.5 ton turnable-mounted hydraulic crane is mounted on the roof rear, with a telescopic jib that has 315 degrees of traverse, with the boom being elevated to +70 degrees. The vehicle contains two hydraulic stabilizers for the crane, in which they are lowered to the ground while the crane is being used to provide a more stable platform. The vehicle is 13 tons in weight, and 2.8 meters in height. [17]
The vehicle includes the following specialized equipment for repair duties: an air compressor, electric power unit, battery charger, testing unit, portable drill and grinder, tire repair set, radiator set, tool set, greasing equipment, hydraulic jack, oxy acetylene set, recovery equipment and a tent. [17]
The ambulance variant is based on the basic Fahd APC design, with modifications for its specialized purpose. The vehicle has the ability to serve four laying patients, and another four sitting patients. The vehicle has a crew of three, these are: driver, physician, and a dresser. The ambulance variant additional external flasher, and a search light mounted on the rear door for emergency. [18] Along with one tent and dual interior lights, the vehicle is equipped with specialized medical instruments. [18]
Another conversion of the Fahd APC enables it to become a mine laying vehicle. The mine are of anti-tank type, where these vehicles are used as mobile systems with high maneuverability, and the ability to lay anti-tank mine fields in a short time. The mine laying system used on the Fahd is the Nather-2. The mine laying system is equipped with a control unit that computes the tube firing sequence delay time to set mine densities, and adjusts the required dispensing direction. The mines can be dispensed on right, left and backwards of the vehicle. [19] [20]
The mine layer can create a mine field from 1,500 to 3,000 metres long and 25–30 metres wide from four dispensing modules firing 600 mines per salvo giving a mine density between 0.2 and 1 mine per square meter. [19] [20]
The Fahd command vehicle contains three gun mounts for 7.62 mm caliber machine guns, as well as other special equipments for command purposes. [5] The command vehicle is equipped with three-four wireless communication set with antennas and six terminals intercom system, a 10-line telephone exchange and two field telephones powered from a 1.5 kW electrical generator.
This IFV variant is essentially a Fahd 240, fitted with a dual-weapon turret that has a 12.7 mm machine gun and a 7.62 mm machine gun. The addition of a turret requires a third crewman, the gunner, but it does not affect the Fahd 240's passenger capacity. The turret is the French BTM-208 turret, produced under license from the French SAMM company. It is air-tight, and provides NBC protection. It incorporates and aiming telescopic periscope, forward–observation, rotating mirror periscope in co-axial alignment with weapons, and five or six bullet-proof glass ports insuring all-round vision and ballistic protection. 200 rounds are provided for the 7.62 mm machine gun, and another 100 for the 12.7 mm machine gun. Elevation limits are -8 and +45, the turret provides 360 degrees of traversion for the weapons. The vehicle has a rotating seat, and an armored hatch for the turret. The machine guns can be fired by means of a foot pedal, freeing the gunner's hands. A central console groups control switches and warning lights governing weapon selection. The addition of a turret increases the vehicle height to 2.85 meters. [21]
Power from the vehicle's 24V DC supply is delivered through an electric slip ring, which features tracks for intercom circuits between gunner and other crew members. The vehicle uses ventilator extraction of firing gases and fumes. [5]
The Anti-Riot variant is based on the Fahd 280. The dual weapons installed in the turret are replaced with a water cannon actuated at 180 L/min pump to jet plain, colored or mixed water at a distance of 30–50 m. Grenade launchers are also installed on the turret for firing smoke and tear gas grenades. There is a steel grader in the vehicle front to remove barricades in streets and passes, along with two flashers, multi-tone siren, loud speaker and horn. This variant also has a passenger capacity of ten. [5]
The Fahd 280-30 is an IFV variant of the Fahd, first announced in 1990. [22] It features a BMP-2 turret on the roof of the passenger compartment near the rear. [23] It has a 30 mm automatic cannon with a dual feed, one for HE rounds, the other for AP rounds, which can pierce 18 mm armor at 60 degrees from a range of 1500 m. It also has a coaxial 7.62 mm PKT machine gun and an ATGM launcher, capable of launching AT-4 or AT-5 missiles which use SACLOS guidance, increasing the range at which the Fahd 280-30 can engage armored targets such as tanks to nearly 4000 m. These turret-mounted missiles may be deployed away from the vehicle on a launching tripod. The Fahd-30 carries 500 30 mm rounds for the autocannon, 2,000 rounds for the 7.62 mm machine gun, and five AT-5 missiles. Smoke grenade launchers are standard on this vehicle, with four on each side of the turret. The BMP-2 turret may use appliqué armor. In terms of design it is similar to the Fahd 240, but this variant has three firing ports on each side of the vehicle. [5]
The Fahd 280-30 has a third crewman, a gunner positioned in the turret, in addition to the commander and driver. As a result of the relatively large turret this variant has a reduced passenger capacity; it can carry seven passengers instead of the original ten. The turret is standard-equipped with passive IR and night vision sensors. It also has fire control and stabilization. As a result of the armament on the Fahd 280-30, the IFV can provide fire support to infantry and it is capable of engaging tanks, armored vehicles, low flying aircraft, helicopters and personnel, with the ability to engage in a stationary position, on the move, in day or nighttime conditions, with high accuracy. The unit price is $254,246. [3]
The gas-operated gun is a dual feed multipurpose small caliber weapon, [24] [25] that has a dual rate of fire with a minimum rate of 200-300 or 550 rounds per minute (rds/min), where the rapid fire mode assures 800 rds/min. [25] [26] The sustained rate of fire is 200 rds/min, though. [24] The gun is intended for engaging materiel, low flying aircraft, light vehicles, and dismounted infantry. [24] [25] [26] With a muzzle velocity of 960 m/s, [24] [26] the gun is capable of defeating a light Armored Personnel Carrier at a range of 1,500 meters, a soft-skinned vehicle at 4,000 meters, and slow-flying aircraft at altitudes up to 2,000 meters and slant ranges of up to 2,500 meters. [25]
At EDEX 2018, the Arab Organization for Industrialization (AOI) presented a new modernized version of the Fahd under the name of Fahd 300. [27] [28]
The Fahd 300 benefits from many improvements and is based on a new Tatra chassis offering more mobility in all-terrain conditions, and powered by a Cummins turbodiesel engine. The Fahd 300 can reach a maximum speed of 105 km/h, with a maximum cruising range of 700 km. It has a new V-shaped hull design with a new armor offering more protection against ballistic and IEDs (Improvised Explosive Device) threats. [27] [28]
The Fahd 300 can accommodate 13 military personnel including driver, commander and gunner. Driver and vehicle commander have a large bulletproof windscreen that can be covered by a shutter hinged at the top. The rear part of the hull has been raised compared to the original version of the Fahd, offering more internal volume for the troop compartment. Troops can enter and leave the vehicle via a door located at the rear of the hull, the upper part of which folds upwards and the lower part downwards to form a step. [27] [28]
At EDEX 2023, an ambulance variant known as the Fahd 300-MD was presented. [29]
The Fahd have been used by eight countries including Egypt, and also served under the United Nations. It has seen service as a part of SFOR in Bosnia and Herzegovina, and as a part of UNOSOM in Somalia.
The vehicle was originally designed to fit Egyptian requirements by Rheinmetall Landsysteme (then Thyssen-Henschel, part of Rheinmetall DeTech) under the designation TH 390. The first prototypes of the vehicle were built in Germany for Egypt. Production was undertaken by the Kader Factory for Developed Industries, part of the Arab Organization for Industrialization. The production commenced in 1985. The first vehicles have been completed in 1986 to enter service with the Egyptian Army. The Egyptian Army is believed to have placed an initial order for 300 vehicles with an option of further 110. Egypt uses the Fahd for border patrolling, where these vehicles are equipped with extra periscopes, and night vision equipments. The Fahd is also used by the Egyptian National Police and the Central Security Forces; these vehicles are usually the Anti-riot version or the standard APC variant provided with a box-type shield around the commander's hatch. The vehicle has been used by Egyptian forces in peace keeping missions, and have served with SFOR in Bosnia and Herzegovina. [1]
The military, and paramilitary users of the Fahd in Egypt are:
Egypt sold Kuwait 110 vehicles. [30] [31] Kuwait has been reported to operate about 100 units in 1988, where most of the vehicles were captured and/or destroyed by the Iraqi forces. [3] Currently, Kuwait has 60 vehicles; some more vehicles were received in 1994. [32] A report of the secretary general of the United Nations Security Council shows that most of the units that were captured by Iraq were returned to Kuwait as part of the return of property seized by Iraq hand over operations that have taken place from the second of March 1994 to 15 October 1996. A total of forty vehicles have been returned on three phases. [33] See the table above for details. Not all of the vehicles are in active service with the Kuwaiti Army currently. [32]
An infantry fighting vehicle (IFV), also known as a mechanized infantry combat vehicle (MICV), is a type of armoured fighting vehicle used to carry infantry into battle and provide direct-fire support. The 1990 Treaty on Conventional Armed Forces in Europe defines an infantry fighting vehicle as "an armoured combat vehicle which is designed and equipped primarily to transport a combat infantry squad, and which is armed with an integral or organic cannon of at least 20 millimeters calibre and sometimes an antitank missile launcher". IFVs often serve both as the principal weapons system and as the mode of transport for a mechanized infantry unit.
The BMP-1 is a Soviet amphibious tracked infantry fighting vehicle that has been in service from 1966 to the present. BMP stands for Boyevaya Mashina Pyekhoty 1, meaning "infantry fighting vehicle, 1st serial model". The BMP-1 was the first mass-produced infantry fighting vehicle (IFV) of the Soviet Union. It was called the M-1967, BMP and BMP-76PB by NATO before its correct designation was known.
The BMD-1 is a Soviet airborne amphibious tracked infantry fighting vehicle (IFV), which was introduced in 1969 and first seen by the West in 1970. BMD stands for Boyevaya Mashina Desanta. It can be dropped by parachute and although it resembles the BMP-1 it is in fact much smaller. The BMD-1 was used as an IFV by the Soviet Airborne Forces (VDV). An improved variant of the BMD-1 was developed, the BMD-2. The BMD-1 also provided a basis for the BTR-D airborne multi-purpose tracked APC.
The BTR-80 is an 8×8 wheeled amphibious armoured personnel carrier (APC) designed in the Soviet Union. It was adopted in 1985 and replaced the previous vehicles, the BTR-60 and BTR-70, in the Soviet Army. It was first deployed during the Soviet–Afghan War.
The BTR-50 is a Soviet tracked amphibious armored personnel carrier (APC) based on the PT-76 light tank chassis. The BTR-50 was developed in 1952 and entered service with the Soviet Army in 1954. It ceased production in the USSR in 1970, but production continued in Czechoslovakia until 1972 and there is suggestion that it still produced by some foreign companies. It has the ability to transport up to 20 fully equipped infantrymen, and can be armed with nothing, a 7.62 mm SGMB medium machine gun, or a 14.5 mm KPV heavy machine gun. It saw notable service in the Six-Day War, the Yom Kippur War, and most recently in the Russo-Ukrainian War.
The BTR-40 is a Soviet open-topped, wheeled armoured personnel carrier and reconnaissance vehicle. It is often referred to as the Sorokovka in Soviet service. It was eventually replaced in the APC role by the BTR-152 and in the scout car role by the BRDM-1.
ACV-15 is the designation of an amphibious Infantry fighting vehicle family developed by the Turkish defense company FNSS Savunma Sistemleri A.Ş. This vehicle is also manufactured by DRB-HICOM Defence Technologies (DefTech) in Malaysia. The design is an attempt to combine the capabilities of an infantry fighting vehicle (IFV) and an armoured personnel carrier (APC). The ACV-15 is based on the American Advanced Infantry Fighting Vehicle, which in turn is based on the American M113A1 armored personnel carrier.
The BTR-4 "Bucephalus" is an amphibious 8×8 wheeled infantry fighting vehicle (IFV) designed in Ukraine by the Kharkiv Morozov Machine Building Design Bureau.
The M901 ITV is an American armored vehicle introduced into service in 1979, and designed to carry a dual M220 TOW launcher. It is based on the M113 armored personnel carrier chassis. The M901 ITV is no longer in service with the United States Army, its primary user.
The Shipunov 2A42 is a Soviet/Russian 30 mm autocannon. It is built by the Tulamashzavod Joint Stock Company and named after A. G. Shipunov.
An armoured personnel carrier (APC) is a broad type of armoured military vehicle designed to transport personnel and equipment in combat zones. Since World War I, APCs have become a very common piece of military equipment around the world.
The Egyptian Infantry Fighting Vehicle (EIFV), also known as Infantry Fighting Vehicle Light (IFVL), is an Egyptian modification of the M113. It is a hybrid, based on an enlarged M113 chassis equipped with the complete two-man power-operated turret of the M2 Bradley IFV. The EIFV never entered production for the Egyptian Army.
The Soviet BMP-1 is a tracked, amphibious infantry fighting vehicle (IFV) with a long service history.
Tulpar is a Turkish heavy infantry fighting vehicle designed by the Sakarya-based automotive manufacturer Otokar. It is named after the Tulpar, a winged horse in Turkic mythology.
The Type 08 is a Chinese family of modern eight-wheeled, amphibious, modular armored vehicles developed by Norinco for infantry fire support, battlefield logistics, and quick reaction operations. Developed in the early 2000s, the vehicle family were produced for more than 6,000 hulls and widely deployed by the People's Liberation Army Ground Force and People's Liberation Army Marine Corps.
The VPK-7829 Bumerang is a modular amphibious wheeled infantry fighting vehicle and armored personnel carrier being developed by Russian Military Industrial Company (MIC) for the Russian army.
The BMD-4 is an amphibious infantry fighting vehicle (IFV) originating from post-Cold War Russia. Originally designated as the BMD-3M, the chassis of the BMD-4 is the same as that of the BMD-3 because it was developed on the same basis. This armored fighting vehicle is one of the lightest in its class, possessing a substantial amount of firepower. The vehicle was designed to transport Russian Airborne Troops (VDV), increasing its mobility, armament, and protection on the battlefield.
The Kurganets-25 is a tracked amphibious, 25-ton modular infantry fighting vehicle and armored personnel carrier being developed for the Russian Army. The Kurganets-25 is planned to evolve into various models, gradually replacing BMP, BMD, MT-LB and other types of tracked Soviet armored platforms. The Kurganets-25 is supposed to have modular armor that can be upgraded for specific threats. The Kurganets-25 IFV and APC variants were first seen in public during rehearsals for the 2015 Moscow Victory Day Parade. Serial production was supposed to begin in 2016, but as of 2020, certification by the military is still pending. In 2023, it was confirmed that Kurganets was undergoing trials, and that the vehicle was modified at the customer’s request. The changes affected the Kurganets-25 chassis, which as a result became more reliable and also easier to operate and repair.