Protolab Misu

Last updated
MiSu
MiSu 3.jpg
Protected Multipurpose Vehicle PMPV 6×6 "MiSu"
Type Amphibious MRAP APC
Place of origin Finland
Specifications
Mass14 tonnes (14 long tons; 15 short tons)
Length7.44 m (24.4 ft)
Width2.55 m (8 ft 4 in)
Height2.7 m (8 ft 10 in)
Crew2 (+10 passengers)

Armor 10 mm
Engine6.7-liter Cummins diesel engine
285 hp (212 kW), max torque 980 Nm
Power/weight20.35 hp/tonne
Suspensionparabolic leaf-springs with hydraulic shock absorbers
Operational
range
900 km
Maximum speed 110 km/h on land, 12 km/h in water

The PMPV MiSu is a Finnish made six-wheeled amphibious mine-resistant ambush protected armoured personnel carrier (APC) designed for the Finnish Defence Forces as a possible replacement for its XA-180-series vehicles. The first version was produced in 2015 and test production began in 2017. It was designed to operate with ease of use, simple structure and low-cost maintenance. The basic appearance and configuration of PMPV Misu is similar to most wheeled MRAPs. The Misu is fully amphibious. [1]

Contents

Development

In 2009 Protolab Oy began planning a prototype vehicle intended as a replacement for the XA-180 vehicles used by the Finnish Army. In 2015 the first vehicle was sent out for field testing. After additional funding was received as an offset from the NASAMS deal, four vehicles are to be built. Two of these will be sent to the UK for testing the vehicle's functions against explosives. The fourth test vehicle will be the first production vehicle. In December 2017 the Finnish Defense Forces ordered 4 production vehicles.

The vehicle's nickname "MiSu" is derived from the Finnish name "MiinaSuojattu" (transl.mine-protected) and "PMPV" stands for "Protected Multi-Purpose Vehicle". The main superstructure is mainly manufactured from 6 to 12 mm of armour steel enhanced with Exote liner and the bottom is mine strengthened, the front windows are bullet-resistant. The vehicle has continuous six wheel drive and good capabilities for off-road driving. It can take inclines up to a maximum of 60%.

The vehicles are manufactured by Toijala Works in Akaa, Finland. [2]

Operators

See also

Related Research Articles

<span class="mw-page-title-main">Patria Pasi</span> 6×6 amphibious armoured personnel carrier

The Patria Pasi is a Finnish-made six-wheeled armoured personnel carrier (APC) originally designed for Finnish Defence Forces. The first variant was produced in 1983 and serial production began in 1984. It was designed to operate with ease of use, simple structure and low-cost maintenance. The basic appearance and configuration of the Pasi is similar to most other wheeled APCs. The XA-180 and XA-185 are fully amphibious while other variants are not.

<span class="mw-page-title-main">Patria AMV</span> Finnish wheeled armoured personnel carrier

The Patria AMV is an 8×8 multi-role military vehicle produced by the Finnish defence industry company Patria.

<span class="mw-page-title-main">Casspir</span> Mine-resistant ambush protected vehicle

The Casspir is a mine-resistant ambush protected vehicle that has been in use in South Africa since the 1980s. It is a four-wheeled, four-wheel drive vehicle, used for transport of troops. It can hold a crew of two, plus 12 additional soldiers and associated equipment. The Casspir was unique in design when launched, providing for passive mine defence. The main armoured steel body of the vehicle is raised high above the ground, so when a mine is detonated, the explosion is less likely to damage the crew compartment and kill the occupants. The cross-section of the hull is V-shaped, directing the force of the explosion outwards, further protecting the occupants.

<span class="mw-page-title-main">Mamba APC</span> South African mine protected personnel carrier

The Mamba is a South African armoured personnel carrier designed for internal security purposes. It was developed during the late 1980s to replace the Buffel in service with the South African military and security forces. The first models were built on a 4X2 Toyota Dyna chassis, which was subsequently replaced in production around 1994 by a more reliable Unimog chassis. All marks of the Mamba were designed to be mine-resistant and blastproof.

<span class="mw-page-title-main">RG-31 Nyala</span> Infantry mobility vehicle

The RG-31 Nyala is a 4×4 multi-purpose mine-resistant ambush protected infantry mobility vehicle manufactured in South Africa by Land Systems OMC, located in Benoni, South Africa and in Turkey by FNSS Defence Systems. It is based on the Mamba APC of TFM Industries.

<span class="mw-page-title-main">Infantry mobility vehicle</span> Wheeled armored personnel carrier

An infantry mobility vehicle (IMV) is a wheeled armored personnel carrier (APC) serving as a military patrol, reconnaissance or security vehicle. Examples include the ATF Dingo, Iveco LMV, Oshkosh M-ATV, AMZ Dzik, AMZ Tur, Mungo ESK, and Bushmaster IMV. This term also applies to Mine-Resistant Ambush Protected (MRAP) vehicles.

<span class="mw-page-title-main">Sisu RA-140 DS</span> Demining vehicle

The Sisu RA-140 DS "Raisu" is a flail-type demining vehicle developed and produced by the Finnish company Sisu-Auto and later produced by Patria Vehicles in the years 1994–2001. The production totalled 41 units.

The Golan Wheeled Armored Vehicle is a prototype Israeli MRAP infantry mobility vehicle made by the Israeli Rafael Advanced Defense Systems jointly with Protected Vehicles Incorporated.

<span class="mw-page-title-main">RG-34</span> Light tactical military vehicle

The RG-34 is a South African Mine-Resistant Ambush Protected vehicle (MRAP). Specially designed to be mine-resistant, it has been produced in multiple variants, equipped for troop or cargo transport, command, and fire support. Originally showcased with a wide turret ring and a 90mm rifled cannon, the RG-34 was one of the first MRAPs configured to carry a large gun system.

The Mahindra Mine Protected Vehicle-I (MPV-I), is an Indian MRAP-type armored personnel carrier manufactured by Defense Land Systems, a joint-venture of Mahindra & Mahindra Limited and BAE Systems, the first vehicle made under the venture. It is an improved Casspir variant built under licence.

The Patria Pasi is a military armoured personnel carrier. It was the choice of the Finnish Defence Forces to replace its aging Soviet BTR-60s. It was a result of the commercial competition between two Finnish companies, a tractor manufacturer Valmet and the lorry manufacturer Sisu, which won the contract with its prototype.

<span class="mw-page-title-main">Amphibious Combat Vehicle</span> American/Italian wheeled design program

The Amphibious Combat Vehicle (ACV) is a program initiated by Marine Corps Systems Command to procure an amphibious assault vehicle for the United States Marine Corps to supplement and ultimately replace the aging Assault Amphibious Vehicle (AAV). The program replaces the Expeditionary Fighting Vehicle (EFV) program canceled in 2011. Originally a plan to develop a high-water-speed vehicle, the program has expanded into a multi-phased approach to procure and develop several types of amphibious-capable vehicles to address near and long-term requirements.

<span class="mw-page-title-main">BMC Kirpi</span> Infantry mobility vehicle

BMC Kirpi is a Turkish made Mine-Resistant Ambush Protected vehicle manufactured by BMC. Kirpi provides significant protection against mine and ballistic threats. It combines standard and add-on armor providing protection against ballistic threats. Its V-shape underbody and monocoque allows it to protect the personnel inside from land mines and improvised explosive devices (IEDs).

<span class="mw-page-title-main">Typhoon (armored fighting vehicles family)</span> Russian family of MRAP armored fighting vehicles

Typhoon is a Russian family of Mine-Resistant Ambush Protected (MRAP) armored fighting vehicles (AFVs) in service since 2014. Around 120 Russian companies including KamAZ, Gaz-Group, and Bauman University, etc. are taking part in Typhoon program. The main aim of the program is to design a unified platform for all Russian armored wheeled vehicles.

<span class="mw-page-title-main">Sisu GTP</span> MRAP APC

The Sisu GTP is a Finnish made four-wheeled, modular mine-resistant ambush protected armoured personnel carrier (APC) designed and built by Sisu Auto. The first version was produced in 2018.

<span class="mw-page-title-main">Patria 6×6</span> Armoured personnel carrier

The Patria 6×6 is a six-wheeled armoured personnel carrier produced by the Finnish defence industry company Patria.

<span class="mw-page-title-main">CS/VP3 MRAP</span> Chinese MRAP

The CS/VP3 MRAP also known as the CS/VP3 Bigfoot is a MRAP developed by Poly Technologies and manufactured by Changan Automobile in China. It was unveiled in China at the China International Aviation & Aerospace Exhibition 2012 in Zhuhai, China, and overseas at the 2012 DSA defense exhibition in Kuala Lumpur, Malaysia.

References

  1. "PMPV 6x6 MiSu MRAP vehicle personnel carrier technical data sheet pictures video 12611154". armyrecognition.com. Retrieved 16 December 2017.
  2. "Protolab Ltd". August 2018.
  3. "The Defence Forces order domestic Protected Multipurpose Vehicles" . Retrieved 2 June 2023.