Fiat CM6614

Last updated
CM6614
FIAT Tipo 6614.jpg
Fiat CM6614
TypeWheeled armoured personnel carrier
Place of origin Italy
Service history
Used bySee: Operators
Wars Somali Civil War
Libyan Crisis
Production history
Manufacturer Fiat-Oto Melara
Asia Motors (KM900 variants)
VariantsCM6616, KM900, KM901
Specifications
Mass8,500 kg (1,340 st)
Length5.86 m (19.2 ft)
Width2.5 m (8.2 ft)
Height1.78 m (5.8 ft)
Crew1-2 crew + 8-10 passengers (CM6614 & KM900)

Armour Steel
Main
armament
CM6614 & KM900:
1 x MG 3 machine gun, K12 machine gun or
1 x .50 cal M2 machine gun
CM6616:
1 x 7.62mm MG 3 machine gun or K12 machine gun
1 x 20mm Rheinmetall MK 20 Rh 202 autocannon
Engine1 x IVECO Model 8062.24
160hp @ 3,200rpm
Suspensionwheeled 4x4
Operational
range
700 km
Maximum speed 100 km/h (62 mph)

The Fiat CM6614 is a 4x4 wheeled armoured personnel carrier developed as a joint venture between Fiat and Oto Melara of Italy. The hull is welded steel, and the vehicle is amphibious. [1] The first prototype was built in 1972.

Contents

Description

The CM6614 hull is made of welded steel with uniform thickness of 8 mm; the driver's seat is on the front left of the vehicle and is equipped with five episcopes to the front and side of the driver which covers a field of vision of 200°. The engine with the transmission is located in on the front right side of the vehicle in order to have as much space as possible for the team of soldiers being transported. The crew compartment in the rear is equipped with a powered ramp for rapid disembarkation / embarkation of troops. There is also a hatch on both sides in the middle of the vehicle. Crew compartment has fume extractor, vision blocks and firing ports allowing troops to fire their personal weapons safely from the inside. The APC could be equipped with a simple manually operated turret armed with a 12.7 mm heavy machine gun and the turret could be folded down during airlift and strategic transportation. On each side of the turret there is an installation of three electrically operated fog/smoke grenade launchers.

The vehicle is amphibious and equipped with run-flat tires, in which the internal material is made of piano strings. Propulsion in the water is provided by the movement of wheels while buoyancy is achieved thanks to the shape of the vehicle. There's no trim vane however so the vehicle is not fully waterproof; the sensor detects the water level and automatically activates pumps to extract water from the vehicle. [2] The Fiat CM6614 can be very useful in rescue missions and emergencies such as natural disasters and for this reason it is still in service with the mobile police of the State Police.

Fiat-6616 in 2011. FIAT-6616.JPG
Fiat-6616 in 2011.

However, Italian-produced CM6614 in 1976 to 1977 showed major flaws in its armor steel during trials in South Korea. When a projectile impacts armor, the entire armor plate cracks like glass rather than creating a single hole. In addition, brand new vehicles also suffered cracks on the armor plate at high temperatures, cutting the vehicle into pieces without any human interference. [2]

Exports

South Korea

In the 1970s, South Korea came in need of wheeled armored vehicles to protect major cities and airfields against North Korean special forces by providing quick placement of defending troops. In 1976, South Korea received a sample of Thyssen Henschel UR-416 from West Germany and a CM6614 from Italy. South Korea originally selected UR-416 for license production; however, due to political tension between South Korea and the United States, the U.S. blocked NATO members from selling such armored vehicles to South Korea. After hearing a refusal from West Germany, South Korea turned its eye to Italian company Fiat, which was very eager to sell the CM6614, and signed a contract behind the curtain for a license under the designation KM900. [2]

To avoid the restriction from NATO, Italy and South Korea smuggled CM6614 by shipping by parts to third countries, then rerouted to Pusan for transferring to Asia Motors (now Kia) for assembly. During the trial, South Korea found major flaws in Italian armor steel, thus requested transfer of armor steel and run-flat tire technology in order to fix the problem and strengthen logistics by producing locally. The transferred technologies were sent to Korean steel & tire manufacturing companies and research groups, and became the basis for future Korean-made armor steel that is used in current MBTs, SPHs, IFVs, and even by the navy's destroyers. [2]

South Korean Fiat 6614. War Memorial of Korea (summer 2013) 067.JPG
South Korean Fiat 6614.

KM900/KM901s were put in service since 1977, and were mainly used by the Republic of Korea Army Capital Defense Command, and airfield securities of the Republic of Korea Air Force. [2] [3] The ROKAF began replacing KM900/KM901 with K200A1 APCs since 1997. [4] The ROKA also retired all these vehicles from active service by mid-2016, and will replace the inventory with newly developed K806/K808 APCs. [5]

Variants

CM6616

The CM6616 was a version of the CM6614 that incorporated a turret armed with a 20mm autocannon. The turret was designed, built, and installed by OTO Melara. [6]

KM900/KM901

The KM900 was license produced version of the CM6614 by Asia Motors for use by the Republic of Korea Army and the Republic of Korea Air Force. The KM901 is a KM900 with a dozer blade on the front. [2]

Operators

Map of Fiat 6614 operators in blue with former operators in red Fiat 6614 operators.png
Map of Fiat 6614 operators in blue with former operators in red
Map of Fiat 6616 operators in blue with former operators in red Fiat 6616 operators.png
Map of Fiat 6616 operators in blue with former operators in red

Current operators

CM6614

CM6616

Former operators

CM6614

CM6616

Note: Numbers reflect total orders/production for each country. Current holdings may be different.

Related Research Articles

<span class="mw-page-title-main">M113 armored personnel carrier</span> Armored personnel carrier

The M113 is a fully tracked armored personnel carrier (APC) that was developed and produced by the FMC Corporation. The M113 was sent to United States Army Europe in 1961 to replace the mechanized infantry's M59 APCs. The M113 was first used in combat in April 1962 after the United States provided the South Vietnamese army (ARVN) with heavy weaponry such as the M113, under the Military Assistance Command, Vietnam (MACV) program. Eventually, the M113 was the most widely used armored vehicle of the U.S. Army in the Vietnam War and was used to break through heavy thickets in the midst of the jungle to attack and overrun enemy positions. It was largely known as an "APC" or an "ACAV" by the allied forces.

<span class="mw-page-title-main">Patria AMV</span> Finnish wheeled armoured personnel carrier

The Patria AMV is an 8×8 multi-role military vehicle produced by the Finnish defence industry company Patria.

<span class="mw-page-title-main">Ariete</span> Main battle tank

The C1 Ariete is a 3rd generation main battle tank of the Italian Army, developed by Consorzio Iveco Oto Melara (CIO), a consortium formed by IVECO and OTO Melara. The chassis and engine were produced by Iveco, while the turret and fire-control system were supplied by OTO Melara. The vehicle carries the latest optical and digital-imaging and fire-control systems, enabling it to fight day and night and to fire on the move. Six prototypes were developed by 1988, which were subject to intensive testing. The following year the vehicles travelled a combined 16,000 km. Deliveries were first planned for 1993, and took place in 1994 due to delays. Final delivery occurred 7 years later in August 2002.

<span class="mw-page-title-main">Dardo IFV</span> Italian infantry fighting vehicle

The Dardo is an infantry fighting vehicle designed for the Italian Army as a replacement for the M113 APC. It is designed and built by the Iveco Fiat Oto Melara Syndicated Company based in Rome. Iveco is responsible for the hull and propulsion systems, while Oto Melara is responsible for the weapons and fire control systems.

<span class="mw-page-title-main">Puma (Italian armoured fighting vehicle)</span> Armoured personnel carrier

The Puma is a family of Italian light wheeled armoured fighting vehicle family, consisting of the Puma 6×6 and the Puma 4×4. The vehicles were developed and are produced by the Consorzio Iveco Fiat – Oto Melara for the Italian Army. First prototypes completed in 1988, with a total of five testbed vehicles being completed by 1990.

<span class="mw-page-title-main">B1 Centauro</span> Wheeled tank destroyer

The Centauro is a family of Italian military vehicles originating from a wheeled tank destroyer for light to medium territorial defense and tactical reconnaissance. It was developed by a consortium of manufacturers, the Società Consortile Iveco Fiat - OTO Melara (CIO). Iveco Fiat was tasked with developing the hull and propulsion systems while Oto Melara was responsible for developing the turrets and weapon systems.

<span class="mw-page-title-main">K200 KIFV</span> Armored personnel carrier


The K200 KIFV is a South Korean armored personnel carrier, originally produced by Daewoo Heavy Industries as a domestic replacement for older armored personnel carriers, such as the M113, in front line service with the Republic of Korea Armed Forces at the time of the K200's development. Since 2009 the K200 has been supplemented by the K21. A total of 2,383 K200 vehicles of all configurations were produced between 1985 and 2006, among which are 111 K200A1 vehicles exported to Malaysia.

A huge number of M113 armored personnel carrier variants have been created, ranging from infantry carriers to nuclear missile carriers. The M113 armored personnel carrier has become one of the most prolific armored vehicles of the second half of the 20th century, and continues to serve with armies around the world in many roles.

<span class="mw-page-title-main">KTO Rosomak</span> Polish 8×8 multi-role military vehicle

The KTO Rosomak is an 8×8 multi-role military vehicle produced by Rosomak S.A., a Polish Armaments Group company, in Siemianowice Śląskie. The vehicle is a licensed variant of the Finnish Patria AMV.

BWP-2000 is a prototype Polish IFV developed from early 1990s to 1999 but eventually canceled.

<span class="mw-page-title-main">OF-40</span> Italian main battle tank

The OF-40 is an Italian main battle tank developed as a joint venture between OTO Melara and Fiat, and intended primarily for export sales. OTO Melara would develop and produce the hulls, and automotive components would be provided by Fiat. Initial design work was started by OTO Melara in 1977, with the first prototypes ready by 1980.

<span class="mw-page-title-main">TM-170</span> Armoured personnel carrier

The TM-170 is an armored personnel carrier was announced for the first time in 1978 and entered production in 1979. It was originally designed primarily for use as an APC or an internal security vehicle, but could be adapted for a wide range of other roles.

<span class="mw-page-title-main">SPG Kalina</span> Armored personnel carrier

The SPG Kalina is a heavy, multi-purpose armoured personnel carrier designed at the OBRUM and is produced by the Bumar Łabędy company - part of Polish military consortium - Bumar Group. SPG is a development of the joint Poland, Soviet Union and East Germany transporter called MT-S, developed in the late 1980s.

<span class="mw-page-title-main">Oerlikon KBA</span> Swiss autocannon

The Oerlikon KBA is a 25 mm (25×137mm) autocannon, developed as a close range multipurpose weapon for the mechanised battlefield, originally made by Oerlikon and currently produced in Rheinmetall Italia S.p.A. facilities. It is a positively locked breech, gas and recoil operated cannon with a rotating bolt head and a dual-belt selective feed system taking a 25mm NATO cartridge. The rate of fire in burst mode is up to 600 rounds per minute but it can be adjusted electronically and reduced to single shot or a selectable range from 100 up to 175 rounds per minute.

<span class="mw-page-title-main">MOWAG Roland</span> Swiss armored personnel carrier

The MOWAG Roland is an armoured personnel carrier of Swiss origin. The vehicle was developed in 1960 and the prototype was tested in 1963. The Roland production was from 1964 to 1980.

<span class="mw-page-title-main">Freccia IFV</span> Italian wheeled infantry fighting vehicle

The VBM – Freccia is a family of 8x8 armoured vehicles that was designed and manufactured for the Italian Army by IVECO for the hull, the engine and the suspension, and OTO Melara for the armament. The first variant to be developed was the IFV, the Freccia being equipped with a Hitfist turret, the same as the one installed on the Dardo IFV.

<span class="mw-page-title-main">Tanks in the Italian Army</span>

Tanks have been employed by the military forces in Italy since their first use in World War I. They have had continued use in wars after and are still used through the modern day. The C1 Ariete is the current main battle tank of the Italian Army.

<span class="mw-page-title-main">K808 White Tiger</span> Korean wheeled armored personnel carrier

The K808/806 White Tiger wheeled armored personnel carrier (APC) is family of 8x8 and 6x6 armored vehicles. Developed by Hyundai Rotem as a private venture in 2012, the Korean Army declared a plan to acquire 600 6×6 and 8×8 wheeled APCs in order to help build rapid response forces molded after U.S. Stryker combat brigades, according to the Defense Acquisition Program Administration (DAPA).

<span class="mw-page-title-main">Hitfist</span> Armoured vehicle turret

Oto Melara Hitfist is a two-man turret, for armored vehicles, developed by the Italian Oto Melara. The turrets are designed to mount a 25mm Oerlikon KBA or 30/40mm ATK Mk44 Bushmaster II autocannon. The main armament may mount a co-axial machine gun. A variant allows the operator to aim and fire anti-tank missiles.

<span class="mw-page-title-main">Fiat-Terni Tripoli</span> Armored car

The Fiat-Terni Tripoli, also known as the Terni armored car, Fiat Terni, Fiat Tripoli, and Fiat Libia, was an armored car used in the colonial theater by the Royal Italian Army during the Interwar period and World War II.

References

  1. "Type 6614". Militaryfactory.com.
  2. 1 2 3 4 5 6 [첨단국가의 초석, 방위산업] 한국형 장갑차의 꿈, KM900 경장갑차 , retrieved 2022-06-20
  3. 국방일보. "국군 장갑차 보유 역사". 국방일보. Retrieved 2022-06-20.
  4. "공군의 지상 지원장비-(1)K200A1 장갑차". 아시아경제 (in Korean). 2020-03-17. Retrieved 2022-06-20.
  5. 문형철 (2016-06-07). "방위사업청, 국내기술로 차륜형 장갑차량 개발완료". 파이낸셜뉴스 (in Korean). Retrieved 2022-06-20.
  6. "FIAT - Oto Melara Type 6616 armoured car (Italy), Reconnaissance vehicles". Jane's Information Group. Archived from the original on 2012-08-20.
  7. "무기체계". 2000. Archived from the original on 2011-07-20. Retrieved 2010-09-14.