Yuanjiawaornis

Last updated

Yuanjiawaornis
Temporal range: Early Cretaceous
Scientific classification OOjs UI icon edit-ltr.svg
Domain: Eukaryota
Kingdom: Animalia
Phylum: Chordata
Clade: Dinosauria
Clade: Saurischia
Clade: Theropoda
Clade: Avialae
Clade: Enantiornithes
Genus: Yuanjiawaornis
Hu et al., 2015
Type species
Yuanjiawaornis viriosus
Hu et al., 2015.

Yuanjiawaornis is an extinct genus of large enantiornithean bird known from the early Cretaceous of present-day China. It is monotypic, with only type species Y. virisosus known. [1]

Contents

History of Discovery

In 2005, near the village of Yuanjiawa, near the town of Dapingfang in Chaoyang in western Liaoning province, the fossil of a bird was unearthed. Exceptionally, this was done by a paleontologist and not by the illegal fossil trade, which poaches by far the majority of fossils in the area. [1]

In 2015, the type species Yuanjiawaornis viriosus was named and described by Hu Dongyu, Liu Ying, Li Jinhua, Xu Xing and Hou Lianhai. The genus name connects the name of the finding site with the Ancient Greek ornis, "bird". The species name means "powerful" in Latin and refers to its relatively large body size. [1]

The holotype, 'PMOL AB00032, has been found in the Yuanjiawa strata of the Jiufotang Formation dating to the Aptian, about 120 million years old. It consists of a skeleton without a skull, flattened on a plate. Apart from the skull, the cervical vertebrae, the frontal vertebrae, and most of the phalanges of the fingers and toes are missing. The fossil is largely in bandages, although the pelvis has shifted. Nothing of the plumage has been preserved, which is exceptional for bird fossils from Liaoning. However, the pelvis is partly covered by what appears to be a layer of preserved soft tissue. It is probably a young adult specimen. It is part of the collection of the Paleontological Museum of Liaoning, which also collected and prepared it. [1]

Description

Size and distinguishing characteristics

Yuanjiawaornis is a remarkably large species. Most enantiornithines are sparrow- or starling-sized birds, but Yuanjiawaornis must have had a wingspan of nearly half a metre. The femur has a length of forty-three millimetres. That makes the species about the same size as Zhouornis and only slightly smaller than Pengornis , considered to be a giant among the Chinese enantiornithines from the Lower Cretaceous. [1]

No autapomorphies, unique derived features of Yuanjiawaornis, could be determined. However, there was an unusual combination of non-unique characteristics. The body size is large. The wings and hindlimbs are roughly the same length. The synsacrum shows a longitudinal groove on the underside instead of ridges. The last vertebra of the sacrum has robust and long lateral protrusions, rather than the penultimate vertebra. The scapula has a processus acromialis that tapers obliquely to the front and above. The lateral edge of the coracoid is straight instead of convex. The branches of the wishbone turn towards each other, tapering instead of running parallel with a widening. The sternum has an oval profile, while the outer posterior protrusions are slightly widened at their tip instead of having an angular profile or strongly widened protrusions. The head of the humerus is flat rather than convex or concave. The deltopectoral crest of the humerus passes downward gradually into the shaft rather than abruptly. [1]

Skeleton

The fossil preserves seven vertebrae. These have spinous processes with tips touching each other. The sacrum is fully fused to a synsacrum that has been detached from the fossil and is clearly visible from the underside. Its convex anterior facet is wider than that of the middle sacral vertebrae, but the latter is not extremely transverse. The authors pay special attention to the fact that while in older theropods the middle of the sacrum is widened to bear the weight, it is narrower in enantiornithines. The synsacrum has a sharp longitudinal groove over its entire underside. The lateral protrusion of the posterior sacral vertebrae is robust but not extreme. The base of the tail consists of six amphictic "free" vertebrae with long lateral protrusions directed backwards. The tip is fused into a short tapering pygostyle. [1]

On the scapula, the processus acromialis is angled upwards instead of running in line with the blade if the element is held horizontally, as was indeed the case in the living animal. The protrusion is about as long as the shoulder joint facet. On the wishbone, the branches make an angle of 45° with each other, whereas 60° is normal for relatives. Because the outer edge of each branch is hollowed out, the branches are much narrower at the top than at the bottom; in some relatives, this is the other way around. The thin upper edges continue over the hypocleidium so that this protrusion has a cross-section like an inverted T. [1]

The fact that the branches are tapered does not mean that there is a weak connection with the scapulae: the top of the tip has a swelling, and the processus acromialis of the scapula protrudes with its tip into a concave facet in that bulge, a morphology unique to Yuanjiawaornis. The sternum is wider than long, with a convex leading edge. The sword-shaped protrusion at the centre of the hind edge is wider than the protrusions at the outer corners; in most relatives, they are the same width. All three protrusions project to the rear at about the same distance. The outer protrusions are only slightly broadened at their ends, while they usually end in a fan shape. The intermediate protrusions at the rear edge are remarkably well developed. They end in a point and curve slightly inward. [1]

Arm and hind leg have approximately the same length as in most Enantiornithes. That the upper surface of the humerus is flat is quite exceptional, but that the deltopectoral ridge gradually passes into the shaft is quite normal. The ulna is slightly longer than the humerus, at fifty-three millimetres. The straight and half as wide radius has a groove on the side of the interspace with the ulna, as do some relatives. The hand is not fused in the holotype, a sign that it was a young adult specimen. [1]

The lower leg forms a fused tibiotarsus over five centimetres long. On the tibia is a prominent crista fibularis. The fibula is relatively short, lying along with the upper 30% of the tibia and ending in a tapering point below. The first metatarsal is P-shaped in internal view and not curved around the longitudinal axis. The second metatarsal is the widest element of the metatarsal and clearly longer than the fourth metatarsal. At the lower hinge joint of the third metatarsal, the inner edge projects more strongly towards the sole side than the outer edge, as in Soroavisaurus and Neuquenornis . The fourth metatarsal has no hinge joint but ends in a rounded tip that allows the toe more lateral freedom of movement. The first pedal ungual, which was directed backwards, is robust and strongly curved. Another preserved foot claw of uncertain position is straighter. [1]

Phylogeny

No exact cladistic analysis of Yuanjiawaornis was published in 2015. The descriptors limited its phylogenetic position to a general Enantiornithes. They deduced this from the possession of several typical Enantiornithe features. The parapophyses, the facets for the lower rib heads, are centred on the sides of the vertebrae. The coracoid has a convex interface with the scapula and an upper groove. The wishbone is Y-shaped with a long anterior point (hypocleidium). The sternum has a parabolic leading edge and paired posterior lateral protrusions. The radius has a longitudinal groove on the side of the gap with the ulna. The second metatarsal is wider transversely than the third, which is wider than the fourth. [1]

Related Research Articles

<span class="mw-page-title-main">Enantiornithes</span> Extinct clade of dinosaurs

The Enantiornithes, also known as enantiornithines or enantiornitheans in literature, are a group of extinct avialans, the most abundant and diverse group known from the Mesozoic era. Almost all retained teeth and clawed fingers on each wing, but otherwise looked much like modern birds externally. Over eighty species of Enantiornithes have been named, but some names represent only single bones, so it is likely that not all are valid. The Enantiornithes became extinct at the Cretaceous–Paleogene boundary, along with Hesperornithes and all other non-avian dinosaurs.

<i>Gobipteryx</i> Extinct genus of birds

Gobipteryx is a genus of prehistoric bird from the Campanian Age of the Late Cretaceous Period. It is not known to have any direct descendants. Like the rest of the enantiornithes clade, Gobipteryx is thought to have gone extinct near the end of the Cretaceous.

<i>Archaeorhynchus</i> Extinct genus of birds

Archaeorhynchus is a genus of beaked avialan stem-birds from the early Cretaceous period. A fossil of its only known species, Archaeorhynchus spathula, was first reported in 2005 by Zhou & Zhang to have been found in Yixian Formation rocks at Yixian, Liaoning province, China, showing a well-preserved and essentially complete skeleton. Two more complete specimens were found in Lower Cretaceous deposits of Jianchang, Liaoning, northeastern China, preserving new anatomical information. These deposits are 120 million years old, whereas the original specimen was 125 million years old, meaning the age range for this species is 125-120Ma.

<i>Liaoningornis</i> Extinct genus of birds

Liaoningornis is a genus of bird from Lower Cretaceous China. It was collected from the dinosaur-bearing beds of the Sihetun locality, of the Yixian Formation, Shangyuan, near the city of Beipiao in Liaoning province. The only known species is Liaoningornis longidigitris. It was described by Linhai Hou in 1996 and 1997.

<span class="mw-page-title-main">Avisauridae</span> Extinct family of dinosaurs

Avisauridae is a family of extinct enantiornithine dinosaurs from the Cretaceous period, distinguished by several features of their ankle bones. Depending on the definition used, Avisauridae is either a broad and widespread group of advanced enantiornithines, or a small family within that group, restricted to species from the Late Cretaceous of North and South America.

<i>Peloroplites</i> Extinct genus of dinosaurs

Peloroplites is a monospecific genus of nodosaurid dinosaur from Utah that lived during the Late Cretaceous in what is now the Mussentuchit Member of the Cedar Mountain Formation. The type and only species, Peloroplites cedrimontanus, is known from a partial skull and postcranial skeleton. It was named in 2008 by Kenneth Carpenter and colleagues. Peloroplites was 6 metres long and weighed 2 tonnes, making it one of the largest known nodosaurids, and came from a time when ankylosaurids and nodosaurids were attaining large sizes.

Zambiasaurus is an extinct genus of dicynodonts that was discovered in the Middle Triassic (Anisian) Ntawere Formation of Zambia, southern Africa. It was a large dicynodont, reconstructed using several fossil fragments, in majority belonging to probably a juvenile Zambiasaurus submersus.

<i>Bicentenaria</i> Extinct species of reptile

Bicentenaria is an extinct genus of carnivorous coelurosaurian theropods which lived during the early Late Cretaceous (Cenomanian) Candeleros Formation of Argentina. It contains the type species, B. argentina.

<i>Jianchangosaurus</i> Extinct genus of dinosaurs

Jianchangosaurus is a genus of therizinosaurian dinosaur that lived approximately 126 million years ago during the early part of the Cretaceous Period from the Yixian Formation in what is now China. The nearly complete juvenile specimen was missing only the distal tail. Jianchangosaurus was a small, lightly built, bipedal, ground-dwelling herbivore, that could grow up to an estimated 2 m (6.6 ft) long and was 1 m (3.3 ft) high at the hips.

<i>Europelta</i> Extinct genus of dinosaurs

Europelta is a monospecific genus of nodosaurid dinosaur from Spain that lived during the Early Cretaceous in what is now the lower Escucha Formation of the Teruel Province. The type and only species, Europelta carbonensis, is known from two associated partial skeletons, and represents the most complete ankylosaur known from Europe. Europelta was named in 2013 by James I. Kirkland and colleagues. Europelta has an estimated length of 5 metres and weight of 1.3 tonnes, making it the largest member of the clade Struthiosaurini.

<i>Chuanqilong</i> Extinct genus of dinosaurs

Chuanqilong is a monospecific genus of basal ankylosaurid dinosaur from the Liaoning Province, China that lived during the Early Cretaceous in what is now the Jiufotang Formation. The type and only species, Chuanqilong chaoyangensis, is known from a nearly complete skeleton with a skull of a juvenile individual. It was described in 2014 by Fenglu Han, Wenjie Zheng, Dongyu Hu, Xing Xu, and Paul M. Barrett. Chuanqilong shows many similarities with Liaoningosaurus and may represent a later ontogenetic stage of the taxon.

Nundasuchus is an extinct genus of crurotarsan, possibly a suchian archosaur related to Paracrocodylomorpha. Remains of this genus are known from the Middle Triassic Manda beds of southwestern Tanzania. It contains a single species, Nundasuchus songeaensis, known from a single partially complete skeleton, including vertebrae, limb elements, osteoderms, and skull fragments.

<i>Forfexopterus</i> Genus of ctenochasmatid pterosaur from the Early Cretaceous

Forfexopterus is a genus of ctenochasmatid pterosaur from the Early Cretaceous Jiufotang Formation in China. It contains a single species, F. jeholensis, named from a mostly complete skeleton by Shunxing Jiang and colleagues in 2016. A second specimen, consisting of a wing, was described in 2020. While the first specimen is larger, it shows signs of being less mature than the second specimen, indicating that the developmental trajectories of Forfexopterus were variable. Like other ctenochasmatids, Forfexopterus had a long, low skull filled with many slender teeth; unlike other members of the group, however, it did not have a spatula-shaped snout tip or crests, and its teeth were more curved. A single characteristic distinguishes Forfexopterus from all other members of the wider group Archaeopterodactyloidea: of the four phalanx bones in its wing finger, the first was shorter than the second but longer than the third.

<i>Douzhanopterus</i> Genus of monofenestratan pterosaur from the Late Jurassic

Douzhanopterus is an extinct genus of monofenestratan pterosaur from the Late Jurassic of Liaoning, China. It contains a single species, D. zhengi, named by Wang et al. in 2017. In many respects, it represents a transitional form between basal pterosaurs and the more specialized pterodactyloids; for instance, its tail is intermediate in length, still being about twice the length of the femur but relatively shorter compared to that of the more basal Wukongopteridae. Other intermediate traits include the relative lengths of the neck vertebrae and the retention of two, albeit reduced, phalanx bones in the fifth digit of the foot. Phylogenetically, Douzhanopterus is nested between the wukongopterids and a juvenile pterosaur specimen from Germany known as the "Painten pro-pterodactyloid", which is similar to Douzhanopterus in many respects but approaches pterodactyloids more closely elsewhere.

<i>Zhongjianosaurus</i> Extinct genus of reptiles

Zhongjianosaurus is a genus of dromaeosaurid belonging to the Microraptoria. Believed to hail from the Yixian Formation, specifically the middle of the Jehol Biota, it is the smallest known microraptorine thus far discovered and one of the smallest non-avian theropod dinosaurs.

Magnamanus is an extinct genus of herbivorous iguanodontian dinosaur that lived during the Early Cretaceous in what is now Spain in the Golmayo Formation. It contains a single species, Magnamanus soriaensis.

<i>Daliansaurus</i> Extinct genus of dinosaurs

Daliansaurus is a genus of small troodontid theropod dinosaur, measuring approximately 1 metre long, from the Early Cretaceous of China. It contains a single species, D. liaoningensis, named in 2017 by Shen and colleagues from a nearly complete skeleton preserved in three dimensions. Daliansaurus is unusual in possessing an enlarged claw on the fourth digit of the foot, in addition to the "sickle claw" found on the second digit of the feet of most paravians. It also has long metatarsal bones, and apparently possesses bird-like uncinate processes. In the Lujiatun Beds of the Yixian Formation, a volcanically-influenced region with a cold climate, Daliansaurus lived alongside its closest relatives - Sinovenator, Sinusonasus, and Mei, with which it forms the group Sinovenatorinae.

<i>Cruralispennia</i> Extinct genus of birds

Cruralispennia is an extinct genus of enantiornithean bird. The only known specimen of Cruralispennia was discovered in the Early Cretaceous Huajiying Formation of China and formally described in 2017. The type species of Cruralispennia is Cruralispennia multidonta. The generic name is Latin for "shin feather", while the specific name means "many-toothed". The holotype of Cruralispennia is IVPP 21711, a semi-articulated partial skeleton surrounded by the remains of carbonized feathers.

<i>Mirarce</i> Extinct genus of birds

Mirarce is a genus of enantornithe bird from the Late Cretaceous of Utah. It contains a single species, M. eatoni. It was similar in size to modern turkeys.

<i>Stegouros</i> Extinct genus of dinosaurs

Stegouros is a genus of ankylosaurian dinosaur from the Late Cretaceous Dorotea Formation of southern Chile. The genus contains a single species, Stegouros elengassen, known from a semi-articulated, near-complete skeleton.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 Dongyu Hu, Ying Liu, Jinhua Li, Xing Xu & Lianhai Hou, 2015, "Yuanjiawaornis viriosus, gen. et sp. nov., a large enantiornithine bird from the Lower Cretaceous of western Liaoning, China", Cretaceous Research 55 : 210- 219