AMD Turion is the brand name AMD applies to its x86-64 low-power consumption mobile processors codenamed K8L. [1] The Turion 64 and Turion 64 X2/Ultra processors compete with Intel's mobile processors, initially the Pentium M and the Intel Core and Intel Core 2 processors.
Earliest Turion 64 processors are plugged into AMD's Socket 754. They are equipped with 512 or 1024 KiB of L2 cache, a 64-bit single channel on-die DDR-400 memory controller, and an 800 MHz HyperTransport bus. Battery saving features, like PowerNow! , are central to the marketing and usefulness of these CPUs. The newer "Richmond" models are designed for AMD's Socket S1 and have a double-channel DDR2 controller.
Turion 64 X2 is AMD's 64-bit dual-core mobile CPU, intended to compete with Intel's Core and Core 2 CPUs. The Turion 64 X2 was launched on May 17, 2006, [2] after several delays. These processors use Socket S1 and feature DDR2 memory. They also include AMD Virtualization Technology and more power-saving features.
The earlier 90 nm devices were codenamed Taylor and Trinidad, while the newer 65 nm cores have codename Tyler.
Turion X2 Ultra (codenamed Griffin) is the first processor family from AMD solely for the mobile platform, based on the Athlon 64 (K8 Revision G) architecture with some specific architectural enhancements similar to current Phenom processors aimed at lower power consumption and longer battery life. The Turion Ultra processor was released as part of the " Puma " mobile platform in June 2008.
The Turion X2 Ultra is a dual-core processor fabricated on 65 nm technology using 300 mm SOI wafers. It supports DDR2-800 SO-DIMMs and features a DRAM prefetcher to improve performance and a mobile-enhanced northbridge (memory controller, HyperTransport controller, and crossbar switch). Each processor core comes with 1 MiB L2 cache for a total of 2 MiB L2 cache for the entire processor. This is double the L2 cache found on the Turion 64 X2 processor. Clock rates range from 2.0 GHz to 2.4 GHz, and thermal design power (TDP) range from 32 watts to 35 watts. [3]
The Turion X2 Ultra processor, unlike earlier Turions, implements three voltage planes: one for the northbridge and one for each core. [4] This, along with multiple phase-locked loops (PLL), allows one core to alter its voltage and operating frequency independently of the other core, and independently of the northbridge. Indeed, in a matter of microseconds, the processor can switch to one of 8 frequency levels and one of 5 voltage levels. By adjusting frequency and voltage during use, the processor can adapt to different workloads and help reduce power consumption. It can operate as low as 250 MHz to conserve power during light use.
Additionally, the processor features deep sleep state C3, deeper sleep state C4 (AltVID), and HyperTransport 3.0 up to 2.6 GHz, or up to 41.6 GB/s bandwidth per link at 16-bit link width and dynamic scaling of HT link width down to 0-bit ("disconnected") in both directions from and to the chipset for four different usage scenarios. [5] It also implements multiple on-die thermal sensors through integrated SMBUS (SB-TSI) interface (replaces and eliminates the thermal monitor circuit chip through SMBUS in its predecessors) with additional MEMHOT signal sent from embedded controller to the processor, and reduces memory temperature.
The Turion X2 Ultra processor uses the same socket S1 as its predecessor, Turion 64 X2, but the pinout is different. [6] It is designed to work with the RS780M chipset.
Given the above enhancements on the architecture, the cores were minimally modified and are based on the K8 instead of the K10 microarchitecture. [6] AMD Fellow Maurice Steinman has said the cores are almost transistor-for-transistor identical to those found in the 65 nm Turion 64 X2 processors. [ citation needed ]
Turion II Ultra (codenamed Caspian) is the mobile version of the K10.5 architecture produced using 45 nm fabrication process, also known by its desktop variant Regor. It is a dual core processor, and features clock speeds of 2.5 GHz, 2 MB total L2 cache (1 MB per core), HyperTransport at 3.6 GT/s, and a 128 bit FPU. It maintains a TDP of 35W from its predecessor Turion X2 Ultra (codenamed Griffin).
Turion II is identical to Turion II Ultra, except that the Turion II features only 1 MB of L2 cache (512 KB per core), and lower clock speeds ranging from 2.2 GHz to 2.6 GHz.
The model naming scheme does not make it obvious how to compare one Turion with another, or even an Athlon 64. The model name is two letters, a dash, and a two digit number (for example, ML-34). The two letters together designate a processor class, while the number represents a performance rating (PR). The first letter is M for mono (single) core processors and T for twin (dual) core Turion 64 X2 processors. The later in the alphabet that the second letter appears, the more the model has been designed for mobility (frugal power consumption). Take for instance, an MT-30 and an ML-34. Since the T in the MT-30 is later in the alphabet than the L in ML-34, the MT-30 consumes less power than the ML-34. But since 34 is greater than 30, the ML-34 is faster than the MT-30.
The release of the Turion II Ultra and Turion II lineups have simplified name methodology; all newly released Turions have the letter "M" followed by a number designating relative performance. The higher the number, the higher the clock speed. For example, the Turion II M500 has a clock speed of 2.2 GHz while the Turion II M520 has a clock speed of 2.3 GHz.
| Code-named | Core | Date released |
|---|---|---|
| Lancaster Richmond Sable | solo (90 nm) solo (90 nm) solo (65 nm) | Mar 2005 Sep 2006 Jun 2008 |
| Taylor Trinidad Tyler Lion | dual (90 nm) dual (90 nm) dual (65 nm) dual (65 nm) | May 2006 May 2006 May 2007 Jun 2008 |
| Griffin | dual (65 nm) | Jun 2008 |
| Caspian | dual (45 nm) | Sep 2009 |
| Champlain | dual (45 nm) | May 2010 |
The models support the same features available in Lancaster, plus AMD-V.
| Model number | Frequency | L2 cache | FPU width | HT | Multiplier 1 | Voltage | TDP | Socket | Release date | Order part number |
|---|---|---|---|---|---|---|---|---|---|---|
| Turion II P520 | 2.3 GHz | 2 × 1 MB | 128-bit | 1.8 GHz | 11.5× | 25 W | Socket S1g4 | May 12, 2010 | TMP520SGR23GM | |
| Turion II P540 | 2.4 GHz | 2 × 1 MB | 128-bit | 1.8 GHz | 12× | 25 W | Socket S1g4 | October 4, 2010 | TMP540SGR23GM | |
| Turion II P560 | 2.5 GHz | 2 × 1 MB | 128-bit | 1.8 GHz | 12.5× | 25 W | Socket S1g4 | October 19, 2010 | TMP560SGR23GM | |
| Turion II N530 | 2.5 GHz | 2 × 1 MB | 128-bit | 1.8 GHz | 12.5× | 35 W | Socket S1g4 | May 12, 2010 | TMN530DCR23GM | |
| Turion II N550 | 2.6 GHz | 2 × 1 MB | 128-bit | 1.8 GHz | 13× | 35 W | Socket S1g4 | October 4, 2010 | TMN550DCR23GM |
Athlon is the brand name applied to a series of x86-compatible microprocessors designed and manufactured by AMD. The original Athlon was the first seventh-generation x86 processor and the first desktop processor to reach speeds of one gigahertz (GHz). It made its debut as AMD's high-end processor brand on June 23, 1999. Over the years AMD has used the Athlon name with the 64-bit Athlon 64 architecture, the Athlon II, and Accelerated Processing Unit (APU) chips targeting the Socket AM1 desktop SoC architecture, and Socket AM4 Zen (microarchitecture). The modern Zen-based Athlon with a Radeon Graphics processor was introduced in 2019 as AMD's highest-performance entry-level processor.
Opteron is AMD's x86 former server and workstation processor line, and was the first processor which supported the AMD64 instruction set architecture. It was released on April 22, 2003, with the SledgeHammer core (K8) and was intended to compete in the server and workstation markets, particularly in the same segment as the Intel Xeon processor. Processors based on the AMD K10 microarchitecture were announced on September 10, 2007, featuring a new quad-core configuration. The last released Opteron CPUs are the Piledriver-based Opteron 4300 and 6300 series processors, codenamed "Seoul" and "Abu Dhabi" respectively.
The Athlon 64 is a ninth-generation, AMD64-architecture microprocessor produced by Advanced Micro Devices (AMD), released on September 23, 2003. It is the third processor to bear the name Athlon, and the immediate successor to the Athlon XP. The Athlon 64 was the second processor to implement the AMD64 architecture and the first 64-bit processor targeted at the average consumer. Variants of the Athlon 64 have been produced for Socket 754, Socket 939, Socket 940, and Socket AM2. It was AMD's primary consumer CPU, and primarily competed with Intel's Pentium 4, especially the Prescott and Cedar Mill core revisions.
Sempron has been the marketing name used by AMD for several different budget desktop CPUs, using several different technologies and CPU socket formats. The Sempron replaced the AMD Duron processor and competed against Intel's Celeron series of processors. AMD coined the name from the Latin semper, which means "always", to suggest the Sempron is suitable for "daily use, practical, and part of everyday life". The last Semprons were launched in April 2014. The brand was retired with the launch of the AMD A-Series APUs.
The AMD K8 Hammer, also code-named SledgeHammer, is a computer processor microarchitecture designed by AMD as the successor to the AMD K7 Athlon microarchitecture. The K8 was the first implementation of the AMD64 64-bit extension to the x86 instruction set architecture.
The Athlon 64 X2 is the first native dual-core desktop central processing unit (CPU) designed by Advanced Micro Devices (AMD). It was designed from scratch as native dual-core by using an already multi-CPU enabled Athlon 64, joining it with another functional core on one die, and connecting both via a shared dual-channel memory controller/north bridge and additional control logic. The initial versions are based on the E stepping model of the Athlon 64 and, depending on the model, have either 512 or 1024 KB of L2 cache per core. The Athlon 64 X2 can decode instructions for Streaming SIMD Extensions 3 (SSE3), except those few specific to Intel's architecture. The first Athlon 64 X2 CPUs were released in May 2005, in the same month as Intel's first dual-core processor, the Pentium D.
The AMD Family 10h, or K10, is a microprocessor microarchitecture by AMD based on the K8 microarchitecture. The first third-generation Opteron products for servers were launched on September 10, 2007, with the Phenom processors for desktops following and launching on November 11, 2007 as the immediate successors to the K8 series of processors.
Phenom is the 64-bit AMD desktop processor line based on the K10 microarchitecture, in what AMD calls family 10h processors, sometimes incorrectly called "K10h". Triple-core versions belong to the Phenom 8000 series and quad cores to the AMD Phenom X4 9000 series. The first processor in the family was released in 2007.
Phenom II is a family of AMD's multi-core 45 nm processors using the AMD K10 microarchitecture, succeeding the original Phenom. Advanced Micro Devices released the Socket AM2+ version of Phenom II in December 2008, while Socket AM3 versions with DDR3 support, along with an initial batch of triple- and quad-core processors were released on February 9, 2009. Dual-processor systems require Socket F+ for the Quad FX platform. The next-generation Phenom II X6 was released on April 27, 2010.
Athlon II is a family of AMD multi-core 45 nm central processing units, which is aimed at the budget to mid-range market and is a complementary product lineup to the Phenom II.
{{cite web}}: CS1 maint: unfit URL (link)
{{cite web}}: CS1 maint: unfit URL (link)