Alfa Romeo Tipo 512

Last updated
Alfa Romeo Tipo 512
Alfa Romeo Tipo 512.jpg
Category Voiturette
Constructor Alfa Romeo
Designer(s) Wifredo Ricart / Gioacchino Colombo [1]
Successor Alfa Romeo 158
Technical specifications [2]
Chassis Single-seater, tubular frame
Suspension (front)wishbones, longitudinal torsion bar, friction dampers, hydraulic shock absorbers
Suspension (rear) De-Dion-axle, longitudinal torsion bar, friction dampers, telescopic shock absorbers
Axle track Front:1,320 mm (52.0 in)
Rear:1,310 mm (51.6 in)
Wheelbase 2,450 mm (96.5 in)
Engine 1489 cc V12 180° Roots-type supercharger**, Mid, longitudinally mounted
** – 335 bhp (250 kW) @ 8600 rpm
Transmission 5-speed manual.
Weight710 kg (1,570 lb) [2]
Competition history

The Alfa Romeo Tipo 512 was intended to replace the Alfa Romeo 158 Voiturette racing car. It was designed by Wifredo Ricart as his second car for Alfa Romeo after the V16 engined Alfa Romeo Tipo 162.

It was the first mid-engined Alfa Romeo intended racing car. It was fitted with a flat 12 engine (technically speaking it is a 180 degree V12) using a mid-engine layout. With two Roots-type superchargers, the engine could produce up to 225 bhp (168 kW) per litre. The engine had very short stroke compared to other Grands Prix cars at that time, only 54.2 millimetres (2.13 in) (bore 54mm).

On June 19, 1940 Alfa Romeo's test driver Attilio Marinoni was killed while testing the 512 suspension fitted to an Alfetta 158. [3]

Later, on September 12, 1940, the Tipo 512 was first tested, by Alfa Romeo chief test driver Consalvo Sanesi; despite being very powerful its handling was not thought to be good enough. [4]

Car development was stopped during World War II. Another chassis was built, but that car never raced. Both prototypes are currently on display at the Alfa Romeo Historical Museum in Arese, Italy. [5]

Alfa Romeo GP Tipo 512 1940 Museo Storico Alfa Romeo GP Tipo 512 1940 Museo Storico OCT 2015.jpg
Alfa Romeo GP Tipo 512 1940 Museo Storico

The potential of this machine is not very clear, since it remained an unraced prototype. The power of the engine measured at the bench was 335 bhp (250 kW) at 8600 rpm. In the Alfa Romeo museum in Arese, alongside the 512 displayed, is the following data: maximum power (estimated) 500 hp (373 kW) at 11,000 rpm and maximum speed over 350 km/h (217 mph).

Alfa Romeo eventually won the Formula 1 World Championship with the Alfetta 158 in 1950, taking the place for which the 512 was originally designed.

Technical data

Technical data Tipo 152
Engine: 12-cylinder 180° V-engine
displacement: 1489 cm³
Bore x stroke: 54 x 54.2 mm
Max power: 335 hp at 8 600 rpm
Valve control: 2 overhead camshafts per cylinder row,
2 valves per cylinder
Upload:  Roots compressor
Gearbox: 5-speed manual
Chassis:  Trusssram
suspension front: Double cross links, longitudinal torsion bars
suspension rear: De Dion shaft, Watt link, longitudinal torsion bars
Brakes: Hydraulic drum brakes
Wheelbase: 245 cm
Dry weight: 710 kg

Related Research Articles

<span class="mw-page-title-main">Alfa Romeo</span> Italian automotive manufacturer

Alfa Romeo Automobiles S.p.A. is an Italian luxury car manufacturer and a subsidiary of Stellantis Italy. It was founded on 24 June 1910 in Milan, Italy, as A.L.F.A., an acronym for Anonima Lombarda Fabbrica Automobili. The brand is known for sport-oriented vehicles and has been involved in car racing since 1911. As of 2023 it is a subsidiary of the multinational automotive manufacturing corporation Stellantis.

<span class="mw-page-title-main">Straight-eight engine</span> Inline piston engine with eight cylinders

The straight-eight engine or inline-eight engine is an eight-cylinder internal combustion engine with all eight cylinders mounted in a straight line along the crankcase. The type has been produced in side-valve, IOE, overhead-valve, sleeve-valve, and overhead-cam configurations.

<span class="mw-page-title-main">Alfa Romeo 8C</span> Motor vehicle

The Alfa Romeo 8C was a range of Alfa Romeo road, race and sports cars of the 1930s.

<span class="mw-page-title-main">Alfa Romeo Giulia</span> Motor vehicle

Alfa Romeo Giulia is the name of three not directly related models by the Italian car manufacturer Alfa Romeo. The first is a line of sporty four-door compact executive cars produced from 1962 to 1978, the second is an updated, mainly up-engined Spider, Sprint and Sprint Speciale Giuliettas, and the third Giulia is a compact executive car unveiled in 2015.

<span class="mw-page-title-main">Alfa Romeo Montreal</span> Motor vehicle

The Alfa Romeo Montreal is a 2+2 coupé sports car produced by the Italian manufacturer Alfa Romeo from 1970 to 1977.

<span class="mw-page-title-main">Alfa Romeo Alfetta</span> Sedan and fastback coupé

The Alfa Romeo Alfetta is a front-engine, five-passenger sedan and fastback coupé manufactured and marketed by Alfa Romeo from 1972 to 1987 with a production total over 400,000.

<span class="mw-page-title-main">Alfa Romeo Twin Cam engine</span> Reciprocating internal combustion engine

The Alfa Romeo Twin Cam engine is an all-alloy inline-four engine series produced by Alfa Romeo from 1954 to 1994. In Italian it is known as the "bialbero" ("twin-shaft"), and has also been nicknamed the "Nord" (North) engine in reference to its being built in Portello, Milan, in the North of Italy and to distinguish it from the Alfa Romeo Boxer engine built in the South (Sud) for the Alfasud.

<span class="mw-page-title-main">Alfa Romeo 105/115 Series Coupés</span> Motor vehicle

The Alfa Romeo 105 and 115 series coupés are a range of cars made by the Italian manufacturer Alfa Romeo from 1963 until 1977, based on a shortened floorpan from the Giulia saloon. They were the successors to the Giulietta Sprint coupé.

The Alfa Romeo Tipo 33 was a sports racing prototype raced by the Alfa Romeo factory-backed team between 1967 and 1977. These cars took part for Sport Cars World Championship, Nordic Challenge Cup, Interserie and CanAm series. A small number of road going cars were derived from it in 1967, called Alfa Romeo 33 Stradale.

<span class="mw-page-title-main">Alfa Romeo V6 engine</span> Reciprocating internal combustion engine

The Alfa Romeo V6 engine is a 60° V6 engine made by Alfa Romeo from 1979 to 2005. It was developed in the early 1970s by Giuseppe Busso, and first used on the Alfa 6 with a displacement of 2.5 L (2,492 cc) and a SOHC 12-valve cylinder head. Later versions ranged from 1,996 to 3,179 cc and had DOHC 24-valve valvetrains. The original design had short pushrods for the exhaust valves in a design similar to earlier Lancia Fulvia engines. The first DOHC version was in the 1993 Alfa Romeo 164, with an aluminium alloy engine block and head with sodium filled exhaust valves.

<span class="mw-page-title-main">Alfa Romeo 158/159 Alfetta</span> Racing automobile

The Alfa Romeo 158/159, also known as the Alfetta, is a Grand Prix racing car produced by Italian manufacturer Alfa Romeo. It is one of the most successful racing cars ever; the 158 and its derivative, the 159, took 47 wins from 54 Grands Prix entered. It was originally developed for the pre-World War II voiturette formula (1937) and has a 1.5-litre straight-8 supercharged engine. Following World War II, the car was eligible for the new Formula One introduced in 1947. In the hands of drivers such as Nino Farina, Juan Manuel Fangio and Luigi Fagioli, it dominated the first two seasons of the World Championship of Drivers.

<span class="mw-page-title-main">ALFA 24 HP</span> Motor vehicle

The ALFA 24 HP is a 4.1-litre four-cylinder passenger car, the first model produced by Italian car manufacturer ALFA, which in 1919 would become Alfa Romeo. It was introduced in 1910, the year ALFA was founded, and produced until 1914 in ALFA's Portello factory near Milan. The model's name comes from its tax horsepower rating, then frequently used as vehicle designation.

<span class="mw-page-title-main">Alfa Romeo Disco Volante</span> Motor vehicle

The Alfa Romeo 1900 C52 "Disco Volante" is a series of experimental sports racing cars produced between 1952 and 1953 by Italian car manufacturer Alfa Romeo in collaboration with Milanese coachbuilder Carrozzeria Touring. The car was distinguished by streamlined, wind tunnel tested bodywork.

Italian motor manufacturer Alfa Romeo has participated multiple times in Formula One. The brand has competed in motor racing as both a constructor and engine supplier sporadically between 1950 and 1987, and later as a commercial partner since 2015. The company's works drivers won the first two World Drivers' Championships in the pre-war Alfetta: Nino Farina in 1950 and Juan Manuel Fangio in 1951. Following these successes, Alfa Romeo withdrew from Formula One.

<span class="mw-page-title-main">Alfa Romeo Tipo A</span> Motor vehicle

Alfa Romeo Tipo A or Alfa Romeo Tipo A Monoposto was the first monoposto (single-seater) racing car, designed by Alfa Romeo. The car had two 6C 1750 straight-6 engines and gearboxes assembled side by side. Producing 230 bhp (172 kW), the car had top speed of 149 mph (240 km/h).

Alfa Romeo Tipo 316, 316 or 16C-316 Grand prix car was used in Grand Prix seasons 1938 and 1939, when it was driven by Giuseppe Farina and Clemente Biondetti. The Tipo 316 was one of three Alfa Romeo cars designed for the new rules in 1938, which differed mainly by the engine, the other two were the Alfa Romeo Tipo 308 straight-8 and Alfa Romeo Tipo 312 with a V12 engine. The car was based on Alfa Romeo 12C-37. It had roots supercharged 60 degree engine from 2,958 cc (180.5 cu in) capacity 58 mm × 70 mm produced 350 bhp (261 kW) at 7500 rpm. The engine was more powerful than the one in Tipo 308 or 312, but it was still not really competitive against Germans.

The Ferrari flat-12 engine family is a series of flat-12 DOHC petrol engines produced by Ferrari from 1964 to 1996. The first racing Ferrari flat-12, the Mauro Forghieri-designed Tipo 207, was introduced in the Ferrari 1512 F1 car in 1964. Later flat-12 racing engines were used in Ferrari Formula One and sports racing cars from 1968 until 1980, including the 212 E Montagna, 312 B series, 312 PB and 312 T series. The roadgoing flat-12 engines were introduced with the 365 GT4 BB and were produced in various versions until the end of F512M production in 1996.

The Alfa Romeo Tipo 162 was designed in 1939 by the Spanish engineer Wifredo Ricart as a replacement for the 60° V-16 engined tipo 316. The Tipo 162 had an unusual 135° V-16 engine and highly streamlined bodywork.

<span class="mw-page-title-main">Alfa Romeo Iguana</span> Concept car designed by Italdesign

The Alfa Romeo Iguana is a concept car produced by Alfa Romeo in 1969. It was designed by Giorgetto Giugiaro at Italdesign.

<span class="mw-page-title-main">Ferrari V12 F1 engine</span> Reciprocating internal combustion engine

Ferrari has made a number of V12 racing engines designed for Formula One; made between 1950 and 1995. Some derived engines were also used in various Ferrari sports prototype race cars and production road cars.

References

  1. "ALFA ROMEO". kolumbus.fi/leif.snellman. Archived from the original on 7 October 2008. Retrieved 2008-09-20.
  2. 1 2 "Alfa Romeo 512". ultimatecarpage.com. Retrieved 2008-09-20.
  3. "The rear-engined revolution". forix.autosport.com. Archived from the original on 28 October 2008. Retrieved 2008-09-21.
  4. Borgeson, Griffith (2002). The Alfa Romeo Tradition. Somerset, England: Haynes Publishing Group. 0-85429-875-4.
  5. "Automobile da corsa - Alfa Romeo Gran Premio 512". museoscienza.org (in Italian). Retrieved 14 October 2012.