Bicycle safety wing

Last updated
A bicycle safety wing Ecarteur velo.jpg
A bicycle safety wing
Bicyclists demonstrating a safe overtaking distance with the use of pool noodles as safety wings. Bicycle demonstration with pool noodles.jpg
Bicyclists demonstrating a safe overtaking distance with the use of pool noodles as safety wings.

A bicycle safety wing is an arm attached to the side of a bicycle. Its purpose is to keep other vehicles from passing too closely. [1] It is usually made of brightly colored plastic, and ends with a retroreflector.

Contents

Legality

French law allows for bicycle safety wings up to 40 centimetres. [2]

See also

Related Research Articles

<span class="mw-page-title-main">Bicycle</span> Pedal-driven two-wheel vehicle

A bicycle, also called a pedal cycle, bike, push-bike or cycle, is a human-powered or motor-powered assisted, pedal-driven, single-track vehicle, having two wheels attached to a frame, one behind the other. A bicycle rider is called a cyclist, or bicyclist.

<span class="mw-page-title-main">Cycling</span> Riding a bicycle

Cycling, also, when on a two-wheeled bicycle, called bicycling or biking, is the use of cycles for transport, recreation, exercise or sport. People engaged in cycling are referred to as "cyclists", "bicyclists", or "bikers". Apart from two-wheeled bicycles, "cycling" also includes the riding of unicycles, tricycles, quadricycles, recumbent and similar human-powered vehicles (HPVs).

<span class="mw-page-title-main">Road cycling</span> Form of cycling including recreational, racing, and utility cycling

Road cycling is the most widespread form of cycling in which cyclists ride on paved roadways. It includes recreational, racing, commuting, and utility cycling. As users of the road, road cyclists are generally expected to obey the same laws as motorists, however there are certain exceptions. While there are many types of bicycles that are used on the roads such as BMX, recumbents, racing, touring and utility bicycles, dedicated road bicycles have specific characteristics that make them ideal for the sport. Road bicycles have thinner tires, lighter frames with no suspension, and a set of drop handle bars to allow riders to get in a more aerodynamic position while cycling at higher speeds. On a flat road, an intermediate cyclist can average about 18 to 20 mph, while a professional rider can average up to 25 mph (40 km/h). At higher speeds, wind resistance becomes an important factor; aerodynamic road bikes have been developed over the years to ensure that as much as possible of the rider's energy is spent propelling the bike forward.

<span class="mw-page-title-main">Bicycle helmet</span> Type of helmet

A bicycle helmet is a type of helmet designed to attenuate impacts to the head of a cyclist in collisions while minimizing side effects such as interference with peripheral vision.

<span class="mw-page-title-main">Cycling in Melbourne</span>

Cycling in Melbourne, the capital city of Victoria, Australia, is enhanced by the city's relatively flat topography and generally mild climate. The city has an active cycling culture for commuting, recreation, fitness and sport, and the metropolitan area has an extensive network of off-road bicycle paths, as well as designated bicycle lanes on many streets.

<span class="mw-page-title-main">Bicycle commuting</span>

Bicycle commuting is the use of a bicycle to travel from home to a place of work or study — in contrast to the use of a bicycle for sport, recreation or touring.

<span class="mw-page-title-main">Vehicular cycling</span> Practice of riding bicycles on roads while obeying roadway rules

Vehicular cycling is the practice of riding bicycles on roads in a manner that is in accordance with the principles for driving in traffic, and in a way that places responsibility for safety on the individual.

<span class="mw-page-title-main">Dooring</span> Type of cycling accident

Dooring is the act of opening a motor vehicle door into the path of another road user. Dooring can happen when a driver has parked or stopped to exit their vehicle, or when passengers egress from cars, taxis and rideshares into the path of a cyclist in an adjacent travel lane. The width of the door zone in which this can happen varies, depending upon the model of car one is passing. The zone can be almost zero for a vehicle with sliding or gull-wing doors or much larger for a truck. In many cities across the globe, doorings are among the most common and injurious bike-vehicle incidents. Any passing vehicle may also strike and damage a negligently opened or left open door, or injure or kill the exiting motorist or passenger.

<span class="mw-page-title-main">Motorized bicycle</span> Bicycle with an attached motor or engine and transmission

A motorized bicycle is a bicycle with an attached motor or engine and transmission used either to power the vehicle unassisted, or to assist with pedalling. Since it sometimes retains both pedals and a discrete connected drive for rider-powered propulsion, the motorized bicycle is in technical terms a true bicycle, albeit a power-assisted one. Typically they are incapable of speeds above 52 km/h (32 mph).

<span class="mw-page-title-main">Bicycle safety</span> Safety practices to reduce risk associated with cycling

Bicycle safety is the use of road traffic safety practices to reduce risk associated with cycling. Risk can be defined as the number of incidents occurring for a given amount of cycling. Some of this subject matter is hotly debated: for example, which types of cycling environment or cycling infrastructure is safest for cyclists. The merits of obeying the traffic laws and using bicycle lighting at night are less controversial. Wearing a bicycle helmet may reduce the chance of head injury in the event of a crash.

Many countries have enacted electric vehicle laws to regulate the use of electric bicycles. Countries such as the United States and Canada have federal regulations governing the safety requirements and standards of manufacture. Other countries like the signatories of the European Union have agreed to wider-ranging legislation covering use and safety.

Bicycle helmets have been mandatory in New Zealand since January 1994. The statute, delineated in Part 11 of the Land Transport Rule 2004, states that "A person must not ride, or be carried on, a bicycle on a road unless the person is wearing a safety helmet of an approved standard that is securely fastened." The law describes six different acceptable helmet standards.

<span class="mw-page-title-main">Outline of bicycles</span> Overview of and topical guide to bicycles

The following outline is provided as an overview of and topical guide to bicycles:

Cycling in Australia is a common form of transport, recreation and sport.

<span class="mw-page-title-main">Bicycle helmets in Australia</span>

Australia was the first country to make wearing bicycle helmets mandatory. The majority of early statistical data regarding the effectiveness of bicycle helmets originated from Australia. Their efficacy is still a matter of debate.

<span class="mw-page-title-main">Bicycle helmet laws</span>

Some countries and lower jurisdictions have enacted laws or regulations which require cyclists to wear a helmet in certain circumstances, typically when riding on the road or a road-related area. In some places this requirement applies only to children under a certain age, while in others it applies to cyclists of all ages.

<span class="mw-page-title-main">Cycling infrastructure</span> Facilities for use by cyclists

Cycling infrastructure is all infrastructure cyclists are allowed to use. Bikeways include bike paths, bike lanes, cycle tracks, rail trails and, where permitted, sidewalks. Roads used by motorists are also cycling infrastructure, except where cyclists are barred such as many freeways/motorways. It includes amenities such as bike racks for parking, shelters, service centers and specialized traffic signs and signals. The more cycling infrastructure, the more people get about by bicycle.

<span class="mw-page-title-main">Bicycle law</span> Laws pertaining to the use and ownership of bicycles

Bicycle law is the parts of law that apply to the riding of bicycles.

<span class="mw-page-title-main">Protected intersection</span> At-grade road junction in which cyclists and pedestrians are separated from cars

A protected intersection or protected junction, also known as a Dutch-style junction, is a type of at-grade road junction in which cyclists and pedestrians are separated from cars. The primary aim of junction protection is to make pedestrians and cyclists safer and feel safer at road junctions.

<span class="mw-page-title-main">Cycling in the United States</span> American sport and mode of transport

Cycling in the United States is a minor sport in the country. It is also a mode of transport, particularly in urban areas.

References

  1. "Safety Wing".
  2. "Fédération française des usagers de la bicyclette | le vélo au quotidien".