Advertisement for Clara Parker, published in the Daily Morning Astorian, April 14, 1888. | |
History | |
---|---|
Name | Clara Parker, later, Astorian |
Owner | Hiram Bliss Parker; Jacob Kamm; others |
Route | Youngs River, lower Columbia and lower Willamette rivers |
Launched | May 14, 1881, at Astoria, Oregon |
Completed | June 2, 1881 |
In service | 1881 |
Out of service | 1903 |
Identification | Clara Parker: US #125915; Astorian: US #106798 |
Fate | Sank at mooring while out of service, April 1908; hull raised, machinery removed. |
Notes | Rebuilt in 1890 at Portland, Oregon and renamed Astorian. |
General characteristics | |
Type | riverine passenger/freight |
Length | Clara Parker: 107.2 ft (32.67 m) exclusive of fantail; Astorian: 142 ft (43.28 m) |
Beam | Clara Parker: 24.5 ft (7.47 m); Astorian: 26.5 ft (8.08 m) |
Depth | 5.8 ft (1.77 m) depth of hold |
Installed power | twin steam engines, horizontally mounted: As Clara Parker: cylinder bore 12.5 in (32 cm); stroke 4 ft 6 in (137 cm); As Astorian: bore 14.5 in (37 cm); stroke 3.5 ft 6 in (122 cm) |
Propulsion | stern-wheel |
Clara Parker was a sternwheel-driven steamboat which was operated on the lower Columbia and lower Willamette rivers in the 1880s. The steamer ran for about ten years out of Astoria, Oregon in towing and jobbing work. [1] [2] In 1890 Clara Parker was rebuilt and renamed Astorian. [3] [4]
Astorian was operated intermittently from 1891 to 1903, when it was tied up to a levee in Portland, Oregon, where in April 1908 it sank. [5] Astoria spent much of its time out of service drawing a "subsidy" from competitors who wanted to keep their fares and freight rates high by keeping out a potential competing steamer.
Clara Parker was built in 1881 at Astoria, Oregon for local businessman and politician Hiram Bliss Parker. [6] [1] Parker was a well-known Astoria merchant and political figure who dealt in "hay, oats, and straw, lime, brick, cement, sand and plaster." [7] [8] [9] Parker advertised wood delivered to order, and a draying, teaming, and express business. [7]
Clara Parker's hull was 107.2 ft (32.67 m) exclusive of the overhang of the main deck over the stern, called the "fantail" on which the stern-wheel was mounted. [6] The steamer had a beam of 24.5 ft (7.47 m) exclusive of the wide protective timbers, called guards running along the upper outside of the hull. [6] The boat had a depth of hold of 5.8 ft (1.77 m). [6] The overall size of the boat was 257.68 gross tons and 194.91 registered tons. [6] Tonnage for these purposes was a measure of volume and not weight. The official merchant vessel registry number was 125915. [6]
Clara Parker was launched at the high tide on May 14, 1881 in Astoria. [1] The boat was named after the youngest daughter of H.B. Parker. [1] On June 1, 1881, Clara Parker was reported to have steam up in the boiler in preparation for departure upriver to Portland, Oregon for inspection. [10] The trip did not take place until Saturday, June 4, when Clara Parker departed Astoria at 3:00 a.m., with Capt. C. Brock as master, John Ferrell as engineer, Eben P. Parker as first officer, and Eben's father, H.B. Parker as purser. [11]
On Sunday, August 7, 1881, Clara Parker, carrying an excursion party, navigated Youngs River to about two miles from the Youngs River Falls. [12] There were many snags in the river, one of which was struck by the boat's wheel, but caused the boat no damage. [12] In June 1883, Clara Parker made runs from Astoria to any and all points on the Columbia river. [13] In 1885 H.B. Parker advertised the steamer Clara Parker for towing, freight, or charter. [7] Clara Parker was in operation in April 1890, running from Portland to Astoria. [14]
At 1:00 a.m. on June 12, 1883, Hazen Alex Parker, age 44, fireman of the Clara Parker, drowned when he lost his footing while boarding the vessel and fell into the river between the dock and the boat. [15] The body was not immediately recovered. [15] H.B. Parker offered $25 for recovery of the body. [15]
On the afternoon of Friday, June 6, 1890, as Clara Parker was coming down Youngs River with a heavy deck load, Charles Hamlin a deck hand aged about 23, fell overboard and drowned. [16] Hamlin had been walking around the deckload on the outside rail of the boat, when he lost his balance and fell into the river. [16] The steamer was stopped, but Hamlin went under before a boat could be launched and was not seen again. [16] Attempts on the day of the drowning to recover Hamlin's body by grappling were unsuccessful. [16]
On July 4, 1892, at 3:00 a.m. when Astorian was lying at Parker's dock in Astoria, deckhand Henry Leinenweber fell overboard from the steamer. [17] Leinenweber was reported to have been intoxicated. [18]
On June 29, 1890 Clara Parker was condemned by the Steamboat Inspection Service on the grounds that its hull was weak and defective. [19] Clara Parker was rebuilt at Portland, Oregon and renamed Astorian. [3] [4] Astorian was scheduled to make its trial trip on December 29, 1890. [20]
The engines of Astorian had a cylinder bore of 14.5 in (37 cm); and a piston stroke 3.5 ft 6 in (122 cm). [4] They developed 1300 nominal horsepower. [21]
Astorian was 142 ft (43.28 m) long on the main deck, exclusive of the fantail. [21] The beam was 26.5 ft (8.08 m), and the depth of hold was 7.5 ft (2.29 m). [21] Astorian's overall size was 361 gross and 234 registered tons. [21] The official merchant vessel registry number was 106798. [21]
Eben P. Parker, captain, Al Church, pilot, and John Phillips, engineer, operated Astorian in the early 1890s. [4] According to one report, Astorian was reputed to be one of the faster boats on the river, and also to have been involved in frequent rate wars. [5] Another source states that Astorian was "too slow to be much of a success anywhere." [4]
On January 23, 1892, Astorian took off 35 passengers from the sternwheeler Harvest Queen, which had grounded at Warrior Rock, near St. Helens, Oregon. [22] Astorian carried the passengers to Portland. [22] Harvest Queen was refloated with only minor damage. [22]
On February 2, 1892, Astorian itself ran aground on the Columbia River near Three Tree Point. [23] The steamer had been en route from Portland to Astoria when at 3:00 a.m. the rudder was struck by a floating timber. [23] The boat then ran on a rock which made a large hole in the right side of the hull. [23] Captain Parker was then in command. [23] He went into the hold, stuffed sixteen pairs of blankets into the hole, set up timbers to hold them in the hole, and steamed on to Astoria, where the vessel arrived safely. [23]
In February 1892 Astorian was being run on the route from Portland to Astoria in competition with the steamers of the Union Pacific Railroad, which included the large sternwheeler R.R. Thompson. [24] Supported by Astoria businessmen, Astorian was running in connection with the steamers Dalles City and Regulator as an opposition line. [25]
On February 16, 1892, Astorian collided with the stern-wheel steamer Ione in Portland, Oregon in a fog. [18] Astorian sustained $50 damage. [18] The case was investigated and as a result the license of Kane Olney, master and pilot of Astorian, was suspended for 10 days for violation of Section 8 of Rule V of the General Rules and Regulations, that is, failure to have a crewman, in addition to the regular pilot on watch, also standing watch in or near the pilot house. [18] [26]
On the night of Wednesday, February 10, 1892, R.R. Thompson collided with Astorian at Coffin Point, on the Columbia River. [24] The collision tore out the left deck and knocking in the guard. [24] No leak in the hull was caused, and both vessels were able to proceed. [24] The competition was said to have engendered bitter feelings between the two companies. [24]
The officers of Astorian were reported to have claimed that the collision was not an accident, but rather an attempt to sink their boat, and rid the Union Pacific of a dangerous rival. [24] A similar accusation was made by The Dalles Daily Chronicle. [27]
By March 11, 1892, the Union Pacific was conducting a rate war on the Columbia with its rivals, the Astorian and the fast sternwheeler Telephone, [28] By March 26, 1892, Union Pacific had reduced its fare to $1, and this had been met by Astoria and Telephone. [29]
In June 1892 it was reported that the prominent businessman Jacob Kamm and the Northern Pacific Railway Company intended to "make things lively for the 'system'" on the lower Columbia river. [30] Kamm, with all the business that the Northern Pacific could afford, had reached an agreement with H.B. Bliss to have Astorian carry passengers at a fare of $2 for the roundtrip Portland-Astoria, and freight at a rate of $1 per ton. [30]
In August 1894 Astorian was tied up in Youngs Bay, west of Astoria, and been so for some time, since the last rate war, when fares had been driven down to 50 cents. [31] H.B. Parker had been paid off by the competition to take Astorian out of service. [31]
Astorian is reported to have been chartered to the OR&N sometime before 1895, with OR&N placing the steamer on the Portland to Cascades route. [4] On April 8, 1895 Astorian was used to inspect the proposed right of way for the Astoria and Columbia River railway, to be built from Astoria to Goble, Oregon. [32] Astorian had been brought around from Young's Bay for the task, where it appears the boat had been laid up. [33]
Around August 1, 1894, H.B. Parker announced that Astorian had been repaired and newly painted, and would soon return to service on the Portland-Astoria route. [31] Fares on that route $2 per round trip, at least as charged by the sternwheeler Sarah Dixon, which was just then being placed on the route. [31] The rumor was that Parker's competitors had grown tired of paying him the subsidy to keep Astorian out of service, and had decided to take their chances in direct competition with Parker's boat. [31]
On September 26, 1895, H.B. Parker "surprised the public" by announcing that Astorian would go on the Portland route on the first of October. [34] Painters, carpenters, and machinists were at work on the boat, and the U.S. steamboat inspectors were scheduled to examine the vessel on September 28, 1895. [34] Astorian was still being operated in late December 1896, when at Smith's point, it picked up a small boat, which had apparently been lost by the tender of the Young's Bay bridge. [35]
On Saturday, June 26, 1897 steamboat inspectors Edwards and McDermott examined the boilers of Astorian, finding them in good condition. [36] It was not clear whether the steamer was in operation at the time of the inspection.
Some time around December 1896, Astorian was laid up at Smith Point, downriver from Astoria, under an agreement between the companies operating steamers between Portland and Astoria. [37] All the formerly competing companies had entered into a combine, and the owners of Astorian were paid $250 a month to keep their boat out of service. [37]
In December 1898 the agreement to keep Astorian out of service expired. [37] In August 1899 it was reported that Astorian, then still owned by Captain Parker, had been undergoing extensive repair work while the vessel was moored in Youngs River, and the boat was ready for service. [38] It was reported at the time that railroads had made steamboating unprofitable on the lower Columbia. [39] There was talk that Astorian would be put again on the Astoria route as an opposition boat. [39]
Astorian had not been operated much, spending most its time lying idle on a subsidy, which probably made as much money for the steamer as other boats did by running. [39] On June 24, 1901, Astorian arrived in Portland from downriver, where the boat loaded railroad iron to be used on a logging rail line on the Lewis and Clark River. [39]
In July 1901 Astorian, reportedly nearly ready to begin running, was described by the Morning Oregonian as a boat "whose mission in life seems to be that of a subsidy seeker." [40]
Astorian received no subsidy, nor were the steamer's owners willing to put it on as an opposition boat. [41] Instead Astorian was tied up, again, in Young's Bay. [41] According to a report of the time, the movement to put Astorian in service had reached the point where pledges were being secured to guarantee a certain amount of freight, when a representative of the steamer lines already running on the river informed Astorian's promoters that if they put Astorian on, the competing lines would immediately reduce fares to 10 cents and freight carriage to 25 cents a ton. [41]
On April 14, 1902 Astorian was being refitted and in a few days would be ready to run between Astoria and Portland, which would, it was thought, reduce the present freight and passenger rates. [42]
By January 1903, Astorian had been sold to or otherwise come under the control of the White Collar steamboat line. [5] [43] In January 1903, the White Collar line planned to equip Astorian with a new boiler and heavy machinery to increase the steamer's speed and competitiveness. [43] The White Collar Line ran the boat in opposition to the Oregon Railway and Navigation company's steamers. [5]
For the five years leading up to April 1908, Astorian lay at the Portland city levee, at the foot of Jefferson Street. [44] On Friday, April 3, 1908, the boilers were being removed. [44] Early on the next Saturday morning, the boat sprang a leak, the hull quickly filled with water, and the vessel quickly same to the bottom. [44] The machinery to be removed had been left temporarily on the bow of the boat. [44] The added weight on the bow contributed to sinking the boat. [44] At the time of the sinking, Astorian was owned by Jacob Kamm, who had bought the steamer from the White Collar line just before taking the vessel out of active service in 1903. [44]
In October 1908 the hull of Astorian (which by then had apparently been raised), was assessed for tax purposes to the prominent steamboatman Uriah Bonser Scott at a value of $15,000. [45] J. Allen Harrison, assistant superintendent of the Vancouver Transportation Company acknowledged ownership, but complained Multnomah County Board of Equalization that the machinery had been removed from the steamer and that the hull was rotten and of no value, and should be removed from the assessment rolls. [45]
Wide West was a steamboat that served in the Pacific Northwest of the United States. It had a reputation as a luxury boat of its days.
The Bailey Gatzert was a famous sternwheel steamboat that ran on the Columbia River and Puget Sound from the 1890s to the 1920s. This vessel was considered one of the finest of its time. It was named after Bailey Gatzert, an early businessman and mayor of Seattle, who was one of the closest friends and business associates of John Leary – the person who financed the ship.
Sarah Dixon was a wooden sternwheel-driven steamboat operated by the Shaver Transportation Company on the Columbia and lower Willamette rivers from 1892 to 1926. Originally Sarah Dixon was built as a mixed use passenger and freight vessel, and was considered a prestige vessel for the time.
Montesano was a steamboat that was operated from 1882 to about 1903 in the coastal regions of Oregon and southwest Washington, including Astoria, Willapa Bay, Grays Harbor, the Chehalis River, Yaquina Bay and Coos Bay. The Montesano of 1882, built in Astoria, should not be confused with another, larger sternwheeler, also named Montesano, built-in Cosmopolis, Washington, in 1889.
W.H. Harrison was a steam schooner that operated from 1890 to 1905 on the coast of Oregon, the lower Columbia River, and southwest Washington state. At that time the salmon cannery industry was one of the major businesses of the coast. W.H. Harrison, while also carrying passengers and transporting general freight and lumber, was one of a number of steamers supplying materials to canneries along the coast, and transporting cases of canned salmon from the canneries.
Elwood was a sternwheel steamboat which was built to operate on the Willamette River, in Oregon, but which later operated on the Lewis River in Washington, the Stikine River in Canada, and on Puget Sound. The name of this vessel is sometimes seen spelled "Ellwood". Elwood is probably best known for an incident in 1893, when it was approaching the Madison Street Bridge over the Willamette River in Portland, Oregon. The bridge swung open to allow the steamer to pass. However, a streetcar coming in from the east end of the bridge failed to notice the bridge was open, and ran off into the river in the Madison Street Bridge disaster.
Harvest Queen was the name of two stern-wheel steamboat built and operated in Oregon. Both vessels were well known in their day and had reputations for speed, power, and efficiency.The first Harvest Queen, widely considered one of the finest steamers of its day, was constructed at Celilo, Oregon, which was then separated from the other portions of the navigable Columbia River by two stretches of difficult to pass rapids.
Regulator was a sternwheel-driven steamboat built in 1891 which operated on the Columbia River until 1906, when it was destroyed by explosion which killed two of its crew, while on the ways undergoing an overhaul at St. Johns, Oregon.
Shoo Fly was a sternwheel-driven steamboat that operated on the Willamette and Columbia rivers in the 1870s. Originally built as primarily as a freight boat, the vessel was used in other roles, including towing and clearing of snags. Shoo Fly inspired the name of another sternwheeler on the Willamette River, Don't Bother Me.
Alice was a stern-wheel driven steamboat that operated on the Willamette and Columbia rivers in the 1870s and 1880s. Alice was the largest vessel built above Willamette Falls and was considered in its day to be the "Queen of the River". This steamer was rebuilt after near-destruction in a fire at Oregon City, Oregon in May 1873. In 1876, it was withdrawn from the upper Willamette River and transferred to the Columbia River, where it was worked as a towboat moving ocean-going ships to and from Portland and Astoria, Oregon, near the mouth of the Columbia River.
Dayton was a steamboat which operated on the Willamette and Columbia rivers from 1868 to 1881. Dayton operated on the Willamette from 1868 to 1876, mostly upriver from Willamette Falls, including a route on the Yamhill River to Dayton, Oregon, after which the steamer was named. From 1876 to 1881, Dayton was employed on a run from Portland to Monticello, W.T., which was located on the site of what is now Longview, Washington.
Telephone was a sternwheel-driven steamboat built in 1884 by Captain Uriah Bonsor "U.B." Scott for service on the Columbia River. Reputedly the fastest steamboat in the world in its time, Telephone served on the Columbia River and San Francisco Bay. Telephone was rebuilt at least twice. The first time was after a fire in 1887 which nearly destroyed the vessel. The reconstructed and much larger second vessel was sometimes referred to as Telephone No. 2. The third vessel, Telephone No. 3, built in 1903 and using components from the second steamer was larger but little used during its time on the Columbia river.
Gazelle was a gasoline powered launch that operated on the Willamette and Columbia river from 1905 to 1911. For short periods of time Gazelle was operated on the Oregon Coast, on Yaquina Bay and also as an off-shore fishing vessel, in the Coos Bay area.
Governor Newell was a sternwheel-driven steamboat that operated from 1883 to 1902 in the Pacific Northwest.
Joseph Kellogg was a stern-wheel driven steamboat that operated on the Willamette, Columbia, and Cowlitz rivers for the Kellogg Transportation Company. It was named after the company's founder, Joseph Kellogg (1812-1903). The sternwheeler Joseph Kellogg was built in 1881 at Portland, Oregon.
Relief was a stern-wheel steamboat that operated on the Columbia and Willamette rivers and their tributaries from 1906 to 1931. Relief had been originally built in 1902, on the Columbia at Blalock, Oregon, in Gilliam County, and launched and operated as Columbia, a much smaller vessel. Relief was used primarily as a freight carrier, first for about ten years in the Inland Empire region of Oregon and Washington, hauling wheat and fruit, and after that was operated on the lower Columbia river.
Undine was a sternwheel-driven steamboat that operated from 1887 to 1935 on the Columbia and lower Willamette rivers. From 1935 to 1940 the same vessel was operated under the name The Dalles.
America was a steamboat which operated in the state of Oregon, on the upper Willamette River and Multnomah Channel from 1899 to 1911. This vessel should not be confused with America, a steamer of similar design, built in 1912 in Portland, Oregon
Telegraph was a sternwheel-driven steamboat built in 1903 in Everett, Washington. Except for the summer of 1905, from 1903 to 1912, Telegraph served in Puget Sound, running mainly on the route from Seattle to Everett, and also from Seattle to Tacoma and Olympia, Washington.
The Callendar Navigation Company, sometimes seen as the Callendar Transportation Company, started in business in the early 1900s. Callendar was formed in the early 1900s, and was based in Astoria, Oregon. Callender was to become one of six large towing companies of the Columbia and Willamette rivers in the early decades of the 1900s, the others being Shaver Transportation, Smith Transportation, Hosford, Knappton Towing Co., and Willamette and Columbia River Towing Co. In 1922, Callendar Navigation merged with Knappton Towboat Co., which existed, with a name change in 1990, and which became part of Foss Marine in 1993.