Denbigh, Ruthin and Corwen Railway

Last updated

Contents

Denbigh, Ruthin
and Corwen Railway
BSicon exCONTg.svg
BSicon exABZg+l.svg
BSicon exdCONTfq.svg
BSicon exHST.svg
Denbigh
BSicon exHST.svg
Llanrhaiadr
BSicon exHST.svg
Rhewl
BSicon exHST.svg
Ruthin
BSicon exHST.svg
Eyarth
BSicon exHST.svg
Nantclwyd
BSicon exHST.svg
Derwen
BSicon exHST.svg
Gwyddelwern
BSicon exlv-HST.svg
BSicon exCONTg@Gq.svg
BSicon exABZqr.svg
BSicon exdCONTfq.svg
Corwen

The Denbigh, Ruthin and Corwen Railway was a standard gauge railway line that connected Corwen with Denbigh via Ruthin in North Wales.

The line was promoted independently as part of the rivalry between the London and North Western Railway and the Great Western Railway for access to Rhyl. It opened in stages from 1862 to 1865, and was worked by the LNWR, and vested in that company in 1879.

The line was never busy, serving a rural community, and it was closed to passenger traffic in 1962, and completely in 1965.

Conception

The Denbigh, Ruthin and Corwen Junction Railway Dr&cjr.png
The Denbigh, Ruthin and Corwen Junction Railway

The Chester and Holyhead Railway completed its main line in 1850, transforming the transport environment in North Wales; however its main focus at opening was the Irish Mail traffic rather than local traffic. It allied itself with routes to London via Crewe, and shortly merged with other lines to form the London and North Western Railway, in 1858. [1]

The Shrewsbury and Chester Railway had already opened in 1848; it was not aligned to larger lines at first, but in time it became aligned to the Great Western Railway, so that the two railways were in competition. [2]

Denbigh was an important regional centre, and in 1856 the Vale of Clwyd Railway was authorised by Parliament to build from Rhyl to Denbigh. Relations with the LNWR at Rhyl were not completely cordial. On 1 August 1859 the Vale of Llangollen Railway was authorised by Parliament, to build from a junction south of Ruabon, on the Shrewsbury and Chester line, now in the control of the Great Western Railway. [3] This branch was definitely in the GWR camp, and the GWR was attracted by the possibility of reaching Rhyl. If the gap between Llangollen and Denbigh could be closed, the GWR would achieve its aim; the LNWR made efforts to frustrate that ambition. The following year two ostensibly independent lines were authorised, the Llangollen and Corwen Railway and, on 23 July 1860, the Denbigh, Ruthin and Corwen Railway. [4] [5]

Opening, in stages

Raising the capital to construct the line proved difficult, and in the end the contractors David Davies and Thomas Savin formed a partnership and funded nearly all of the cost. The two men fell out and Davies severed his active involvements with the company, leaving Savin to control progress. He became the dominant force on the board. [6]

Part of the line opened, from Denbigh to Ruthin on 1 March 1862; there were two intermediate stations in the seven-mile line, at Llanrhaiadr and Rhewl. [4] [5]

Savin was now totally in control; continuation of the construction to Gwyddelwern was authorised by the Board of Trade inspecting officer, Captain Tyler, and opening was planned for 12 May 1863, but that was delayed. Savin feared absorption of the company by the LNWR, and this did not suit his business interests: he wished to play the LNWR off against the GWR. Because of negotiations over the matter, it was not until 6 October 1864 that the line was opened throughout to Corwen. [4] [5] Even now this was only to a temporary station, a little short of Corwen on the Llangollen and Corwen Railway, which had become a satellite of the GWR. The actual connection to the GWR line opened nearly a year later, on 1 September 1865, when that company's station was ready. [6] [7]

In fact GWR priorities changed, and the company lost interest in reaching Rhyl; the DR&CR turned to the LNWR camp, and its line was worked by the LNWR; the arrangement was authorised by Act of 1863. [4] [5]

Finance, and lease to the LNWR

Savin was negotiating a lease of the line to the LNWR, but this was broken off in October 1864, and the LNWR were unco-operative about continuing the working arrangement. From 1 August 1865 Savin worked the line using hired locomotives, but Savin himself became bankrupt and the DR&CR board took control and worked the line directly.

Rolling stock hired in from the Cambrian Railways was used, but a dispute with that company over payment of hire charges resulted in a rupture with them. The DR&CR went into receivership by 1866, [4] but the company freed itself from that condition by 1871. A closer relationship with the LNWR was formalised from July 1878, and full vesting with the LNWR was authorised by Act of 3 July 1879. [4] [5]

1895 passenger train service, and later

Bradshaw's Guide shows the 1895 service: there were four trains throughout the line on weekdays, with two additional trains (three on Saturdays) between Denbigh and Ruthin. All the trains called at all stations. [8]

There were three goods trains on the line daily in the 1920s, but this seems to have been exceptional; one a day normally sufficed later. [9]

Closure

Passenger business on the line had always been light, and had declined in the 1930s. After 1945 carryings were so low that it was obvious that the future was bleak, and the ordinary passenger service over the Ruthin to Corwen part of the line was closed on 2 February 1953; however in the summer months a periodical Land Cruise train traversed the line as part of a circular tour. A passenger service from Denbigh to Ruthin continued, as the final part of a service from Chester via Mold.

On 30 April 1962 the remaining passenger service ceased, as did the ordinary goods service to Ruthin; the line closed completely on 1 March 1965. [10] [11]

Future

In February 2020 Brian Jones, a local councillor and lead member for transport at Denbighshire Council, stated he hopes the line can obtain some of the UK Government's £500m fund for reversing the 1960s Beeching cuts. [12] The site of Denbigh railway station is now occupied by a retail park, but the former Corwen railway station remains intact as retail premises. [12] The rail union RMT has however called the Government fund a "drop in the ocean". [12] A railway station is opening in Corwen in 2023 as part of the extension of the heritage Llangollen Railway. [12]

Station list

Related Research Articles

<span class="mw-page-title-main">Llangollen Railway</span> Heritage steam railway in North Wales that follows the old Ruabon – Barmouth GWR route

The Llangollen Railway is a volunteer-run heritage railway in Denbighshire, North Wales, which operates between Llangollen and Corwen. The standard gauge line, which is 10 miles (16 km) long, runs on part of the former Ruabon – Barmouth GWR route that closed in 1965. It operates daily services in the summer as well as weekends throughout the winter months, using a variety of mainly ex-GWR steam locomotives as well as several diesel engines and diesel multiple units. A 2+12 miles (4 km) extension of the railway has been built to complete the line to Corwen.

The Chester and Holyhead Railway was an early railway company conceived to improve transmission of Government dispatches between London and Ireland, as well as ordinary railway objectives. Its construction was hugely expensive, chiefly due to the cost of building the Britannia Tubular Bridge over the Menai Strait. The company had relied on Government support in facilitating the ferry service, and this proved to be uncertain. The company opened its main line throughout in 1850. It relied on the co-operation of other railways to reach London, and in 1859 it was absorbed by the London and North Western Railway.


The Mold and Denbigh Junction Railway was a railway company that built a 16-mile (26 km) railway line in North Wales. It formed a link between the Mold Railway and the Vale of Clwyd Railway towards Rhyl.

The Llanelly Railway and Dock Company was an early Welsh railway system. It opened its first short line and a wet dock at Llanelly in 1834, and soon went on to build a longer line from Llanelly to serve pits in the Amman Valley, and then on to Llandilo, reached in 1857. The Llanelly company leased and worked the Vale of Towy Railway on to Llandovery, from 1858.

The Ruabon–Barmouth line was a standard-gauge line owned by the Great Western Railway across the north of Wales which connected Ruabon, in the east, with Barmouth on the west coast.

The Aberystwith and Welsh Coast Railway was a standard gauge railway company, running a line along the west coast of Wales.

<span class="mw-page-title-main">Llangollen railway station</span> Heritage railway station in north Wales

Llangollen railway station in the town of Llangollen, Denbighshire, Wales, is a preserved railway station on the former Ruabon to Barmouth Line, and now the eastern terminus of the preserved Llangollen Railway.

<span class="mw-page-title-main">Corwen railway station</span> Railway station in Denbighshire, Wales

Corwen railway station refers to two stations, on different sites, which have existed in the town of Corwen in Denbighshire, Wales.

<span class="mw-page-title-main">Vale of Clwyd Railway</span>


The Vale of Clwyd Railway (VoCR) was a standard-gauge line which connected the towns of Rhyl and Denbigh via St Asaph in North Wales.

The Llanidloes and Newtown Railway (L&NR) was a railway company between Llanidloes and Newtown in Montgomeryshire, Wales. It was promoted locally when plans for trunk railways passing through the locality were cancelled; local people saw that a railway connection was essential to the flannel industry in the district. The 17-mile (27 km) line opened in 1859, and at first was isolated from any other railway, but from 1861 it became connected to Oswestry by an allied railway company, and other companies also connected to it. From 1864 the company was incorporated into the new Cambrian Railways company.

The Bangor and Carnarvon Railway was a railway company promoted to build a branch railway connecting Caernarfon with the main line at Bangor, in north-west Wales. It opened in 1852 as far as Port Dinorwic and was extended to Caernarfon later in the same year.

The Hereford, Hay and Brecon Railway (HH&BR) was a railway company that built a line between Hereford in England and a junction with the Mid-Wales Railway at Three Cocks Junction. It opened its line in stages from 1862 to 1864. It never had enough money to operate properly, but the Midland Railway saw it as a means of reaching Swansea, and from 1869 the Midland Railway was given exclusive running powers over the HH&BR. There was then a long-running dispute over whether the Midland inherited rights of access previously granted to the HH&BR.

<span class="mw-page-title-main">Mid-Wales Railway</span>

The Mid-Wales Railway was conceived as a trunk route through Wales connecting industrial areas in North West England with sea ports in South West Wales. The company was prevented from reaching its goal by competing proposals in Parliament, and it was only able to build a line between Llanidloes and a junction with the Brecon and Merthyr Railway 5 miles (8 km) east of Brecon. The line was 70 miles (110 km) long and opened in 1864. The company found it impossible to raise the share subscription, but the contractor partnership of Davies and Savin agreed to build the line and take shares in payment,

<span class="mw-page-title-main">Shrewsbury and Chester Railway</span> Former railway company

The North Wales Mineral Railway was formed to carry coal and ironstone from the mineral-bearing area around Wrexham to the River Dee wharves. It was extended to run from Shrewsbury and formed part of a main line trunk route, under the title The Shrewsbury and Chester Railway. It opened in 1846 from Chester to Ruabon, and in 1848 from Ruabon to Shrewsbury. It later merged with the Great Western Railway.

The Mold Railway was a railway company that built a line in north-east Wales. The line linked Mold to Chester and it opened on 14 August 1849. The company built a mineral branch line to Ffrith, opened in November 1849. Mold itself was an important regional centre, and contained considerable mineral resources.

The Oswestry and Newtown Railway was a British railway company that built a line between Oswestry in Shropshire and Newtown Montgomeryshire, now Powys. The line opened in stages in 1860 and 1861. It was conceived to open up the area to rail transport, when local opinion formed the view that the trunk railway companies would not do so. Subscription money for the construction proved very difficult to generate. It was the action of a contractor partnership, Davies and Savin, in agreeing to accept shares as the majority of their payment for construction work, that saved the company from failure.

The Oswestry, Ellesmere and Whitchurch Railway was a railway company that constructed a line from Whitchurch via Ellesmere to Oswestry. Most of the line was in Shropshire but part entered Flintshire, now Wrexham County Borough. It was seen as a link from the local railways around Newtown to the London and North Western Railway, breaking the local monopoly of the Great Western Railway. It opened as a single line in 1863 and 1864. Throughout the construction period it was short of money, and was paid for by the contractor, who took shares. Sporadically through its life it became a useful part of a through route for mineral trains, but it never developed greatly.

<span class="mw-page-title-main">Newtown and Machynlleth Railway</span>

The Newtown and Machynlleth Railway was a railway company in Wales. It built a line from a junction with the Llanidloes and Newtown Railway near Caersws to the market town of Machynlleth; the line opened in 1862. Newtown had become the hub of railway lines in the district. Machynlleth was an important town, and extension from there to Aberystwyth and to the coast northward was in the minds of the promoters.

<span class="mw-page-title-main">Brymbo railway branch lines</span>

The Brymbo railway branch lines served the rich reserves of coal, iron, limestone and other minerals in an area around Brymbo to the west of Wrexham in Wales. Coalowners and others needed transport to get their products to market and lines were built from the main line into the mineral-bearing area. The topography was difficult and gradients were steep. The Great Western Railway became dominant, but a rival company built a competing line and branches.

The Ruabon railway branch lines were a network of railways built to serve the mineral bearing area west of Ruabon, which contained many coal and iron deposits, as well as limestone, and a small but dense network of railways developed to handle the minerals.

References

  1. Peter E Baughan, A Regional History of the Railways of Great Britain: 14: North and Mid Wales, David St John Thomas, Nairn, 1991, ISBN   0 946537 59 3, pages 22 and 24
  2. Baughan, pages 38 and 39
  3. Baughan, page 137
  4. 1 2 3 4 5 6 Donald J Grant, Directory of the Railway Companies of Great Britain, Matador, Kibworth Beauchamp, 2017, ISBN   978 1785893 537, page 143
  5. 1 2 3 4 5 Baughan, pages 68, 71, and 73 to 75
  6. 1 2 Bill Rear, From Chester to Holyhead: the Branch Lines, Oxford Publishing Company, Hersham, 2003, ISBN   0 86093 569 8, page 65
  7. Rear, page 80
  8. Bradshaw's Rail Times for Great Britain and Ireland: December 1895, reprint, Middleton Press, Midhurst, 2018, ISBN   978 1 908174 11 6
  9. Rear, page 81
  10. Baughan, page 79
  11. Rear, page 82
  12. 1 2 3 4 "Train driver's son hopes to reopen railway line". BBC News. 4 February 2020. Retrieved 5 February 2020.
  13. Michael Quick, Railway Passenger Stations in England, Scotland and Wales: A Chronology, the Railway and Canal Historical Society, Richmond, Surrey, 2002