| LB&SCR E2 class | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 First series E2 with short side tanks, 1913 | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
The London, Brighton and South Coast Railway (LB&SCR) E2 class was a class of 0-6-0 T steam locomotives designed by Lawson Billinton, intended for shunting and short distance freight trains. Ten examples were built between 1913 and 1916, and were withdrawn from service and scrapped between 1961 and 1963.
By 1910, many of the Stroudley E1 class locomotives were worn out or inadequate for the heavier duties required of them. D. E. Marsh intended to rebuild some examples with a larger boiler, but only one E1X rebuild had been completed by the time of his unexpected retirement. Marsh's successor Billinton reversed this policy and instead ordered five new, more powerful locomotives from Brighton railway works. [1] The new class included several features found on other LB&SCR classes including an I2 class boiler. They were delivered between June 1913 and January 1914.
The new design was judged to be successful, except that they were found to have inadequate water supply. Thus when a further order for five locomotives was placed they were given extended side tanks. The second batch were delayed by the onset of World War I, but were eventually delivered between June 1915 and October 1916.
The E2 class locomotives were mainly used for the heavier shunting and short distance freight duties in the London area and on the south coast, as their small coal bunkers made them unsuitable for long trips. These included empty stock workings at Victoria and London Bridge Stations.
Two were tried on passenger services with Push-pull trains in 1914, with the locomotives in the middle of a rake of six coaches, but the experiment was abandoned during the same year as they had insufficient coal capacity. [2]
Following the electrification of the Brighton line in 1936, the class was used as replacements for the former LCDR T class at the Herne Hill marshalling yard, around Victoria station and at Dover harbour. During World War II, they also replaced the SR Z class at Hither Green marshalling yard.
The class were trialled as dock shunters at Southampton in the 1950s, and were found to be suitable for the task. Six examples were retained for this purpose until their replacement by British Rail Class 07 diesel shunters in 1962. [3]
Withdrawal of the class took place between February 1961 and April 1963, and were all scrapped.
| LB&SCR No. | Date Built | S.R. No. | B.R. No. | Date Withdrawn |
|---|---|---|---|---|
| 100 | June 1913 | 2100 | 32100 | November 1961 |
| 101 | August 1913 | 2101 | 32101 | September 1962 |
| 102 | October 1913 | 2102 | 32102 | October 1961 |
| 103 | December 1913 | 2103 | 32103 | October 1962 |
| 104 | January 1914 | 2104 | 32104 | April 1963 |
| 105 | June 1915 | 2105 | 32105 | September 1962 |
| 106 | September 1915 | 2106 | 32106 | October 1962 |
| 107 | March 1916 | 2107 | 32107 | February 1961 |
| 108 | July 1916 | 2108 | 32108 | June 1962 |
| 109 | October 1916 | 2109 | 32109 | April 1963 |
In 1946, Reginald Payne used the later series of E2 locomotives as the basis for the character Thomas the Tank Engine in the second book of The Railway Series by the Reverend W. Awdry. [4] [5]
Trix produced a model of the first series Class E2 in 1961. It was designed for the Trix Twin 3-rail system but could be converted to 2-rail using the optional 2-rail pick up included with the locomotive.
Hornby produced the locomotive in its earliest form as an 00 gauge model. Production lasted from 1979 to 1985 in three distinct variants with four reference numbers. [6] In 1985 the tooling was retired and after some alterations, was instead used as the basis for the Thomas the Tank Engine model.
Bachmann have also produced several different-coloured E2-based models in their Junior Range.
The London, Brighton and South Coast Railway was a railway company in the United Kingdom from 1846 to 1922. Its territory formed a rough triangle, with London at its apex, practically the whole coastline of Sussex as its base, and a large part of Surrey. It was bounded on its western side by the London and South Western Railway (L&SWR), which provided an alternative route to Portsmouth. On its eastern side the LB&SCR was bounded by the South Eastern Railway (SER)—later one component of the South Eastern and Chatham Railway (SE&CR)—which provided an alternative route to Bexhill, St Leonards-on-Sea, and Hastings. The LB&SCR had the most direct routes from London to the south coast seaside resorts of Brighton, Eastbourne, Worthing, Littlehampton and Bognor Regis, and to the ports of Newhaven and Shoreham-by-Sea. It served the inland towns and cities of Chichester, Horsham, East Grinstead and Lewes, and jointly served Croydon, Tunbridge Wells, Dorking and Guildford. At the London end was a complicated suburban and outer-suburban network of lines emanating from London Bridge and Victoria, and shared interests in two cross-London lines.
The Southern Railway took a key role in expanding the 660 V DC third rail electrified network begun by the London & South Western Railway. As a result of this, and its smaller operating area, its steam locomotive stock was the smallest of the 'Big Four' companies.
The London, Brighton and South Coast Railway (LB&SCR) A1 class is a class of British 0-6-0T steam locomotive. Designed by William Stroudley, 50 members of the class were built in 1872 and between 1874 and 1880, all at Brighton railway works. The class has received several nicknames, initially being known as "Rooters" by their south London crews. However, the engines were more famously known as "Terriers" on account of the distinctive 'bark' of the exhaust beat. Later in their careers, some engines were known as "Hayling Billy" on account of their work on the Hayling Island branch line. A pub of this name on the island was briefly home to the engine which is now No. W8 Freshwater.
Brighton railway works was one of the earliest railway-owned locomotive repair works, founded in 1840 by the London and Brighton Railway in Brighton, England, and thus pre-dating the more famous railway works at Crewe, Doncaster and Swindon. The works grew steadily between 1841 and 1900 but efficient operation was always hampered by the restricted site, and there were several plans to close it and move the facility elsewhere. Nevertheless, between 1852 and 1957 more than 1200 steam locomotives as well as prototype diesel electric and electric locomotives were constructed there, before the eventual closure of the facility in 1962.
The London, Brighton and South Coast Railway E4 class is a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1897 and were essentially a larger version of the E3 Class. The cylinder diameter was reduced from 18 to 17.5 inches by the Southern Railway.
The B4 class were 4-4-0 steam locomotives for express passenger work on the London, Brighton and South Coast Railway. They were designed by R. J. Billinton and were either built at Brighton works 1899–1902 or else by Messrs Sharp, Stewart and Company in 1901. Twelve members of the class were rebuilt from 1922 to 1924 by L. B. Billinton with a larger boiler, cylinders and a superheater. The rebuilt locomotives were classified B4X.
The London, Brighton and South Coast Railway E3 class were 0-6-2T side tank steam locomotives. One prototype was designed by William Stroudley shortly before his death, but was completed by R. J. Billinton, who later built sixteen further locomotives.
The LB&SCR K class were powerful 2-6-0 mixed traffic locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway (LB&SCR) in 1913. They appeared shortly before the First World War and the first ten examples of the class did prodigious work during that conflict on munitions, supply and troop trains. Further examples were built after the war, and the class was used as a test bed for various items of specialised equipment. However, after the formation of the Southern Railway in 1923 the remaining three locomotives on order were not completed and the seventeen members of the class led relatively quiet yet reliable lives over their traditional lines. The locomotives proved their usefulness once again during the Second World War, and continued to provide reliable service until the 1960s. The entire class was eventually withdrawn in 1962 for 'bookkeeping' rather than 'operational' reasons.
Robert John Billinton was the Locomotive, Carriage, Wagon and Marine Superintendent of the London, Brighton and South Coast Railway from 1890 until his death.
The London, Brighton and South Coast Railway E1 Class were 0-6-0T steam locomotives designed by William Stroudley in 1874 for short-distance goods and piloting duties. They were originally classified E, and generally known as "E-tanks"; They were reclassified E1 in the time of D. E. Marsh.
Lawson ButzkopfskiBillinton was the Locomotive Engineer of the London, Brighton and South Coast Railway from 1912 until the company became part of the Southern Railway in 1923. He joined the LBSCR in 1900 as an apprentice. By the end of 1907 he was a district locomotive superintendent at the railway works at New Cross. From February 1911 Billinton was locum tenens, or caretaker, for Locomotive Engineer D. E. (Earle) Marsh at Brighton works whilst Marsh was on leave of absence due to ill health. Earle Marsh resigned in July 1911. Billinton was promoted to Locomotive Engineer at the beginning of 1912.
LB&SCR D3 class was a 0-4-4T tank locomotive designed by R. J. Billinton for the London, Brighton and South Coast Railway (LB&SCR) between 1892 and 1896. They were built for working passenger trains along country and main lines.
The LB&SCR L Class was a class of 4-6-4 steam tank locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway. They were known as the "Brighton Baltics", Baltic being the European name for the 4-6-4 wheel arrangement. Seven examples were built between April 1914 and April 1922 and they were used for express passenger services.
The LB&SCR D1 class were powerful 0-4-2 suburban passenger tank locomotives, designed by William Stroudley of the London Brighton and South Coast Railway in 1873. They were originally known as "D-tanks" but later reclassified as class D1. Members of this very successful class survived in service until 1951.
Thomas the Tank Engine is an anthropomorphised fictional tank locomotive in the British Railway Series books by Wilbert Awdry and his son, Christopher, published from 1945. He became the most popular and famous character in the series, and is the titular protagonist in the accompanying television adaptation series Thomas & Friends and its reboot Thomas & Friends: All Engines Go.
The London, Brighton and South Coast Railway (LB&SCR) B2 class was a class of small 4-4-0 steam locomotives intended for express passenger work on the LB&SCR London to Portsmouth line. They were designed by R. J. Billinton and built at Brighton works from 1895 to 1897. They proved to be reliable locomotives but barely adequate for the heaviest trains and acquired the nickname Grasshoppers. As a result the B3 class was developed from the B2, and the B2X class was later rebuilt from these locomotives with larger boilers.
The London, Brighton and South Coast Railway E6 class was a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1904 and were a development of the E5 class with smaller driving wheels intended for heavy short and medium-distance freight trains.
The London, Brighton and South Coast Railway (LB&SCR) H1 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed by D. E. Marsh and were built by Messrs Kitson and Company in 1905 and 1906.
The London, Brighton and South Coast Railway H2 class was a class of 4-4-2 steam locomotives for express passenger work. They were designed when D. E. Marsh was officially Locomotive Superintendent, and were built at Brighton Works in 1911 and 1912. As Marsh had worked on the Great Northern Railway as Chief Assistant to Henry Ivatt, the design closely followed that of the GNR Class C1.
The LB&SCR I3 class was a class of 4-4-2 steam tank locomotives designed by D. E. Marsh for suburban passenger service on the London, Brighton and South Coast Railway.
