WAGR Ec class

Last updated

WAGR Ec class
Ec249, Kellerberrin, ca. 1903.jpg
Type and origin
Power typeSteam
Builder Baldwin Locomotive Works
Total produced20
Rebuilder Midland Railway Workshops
Rebuild date1924-25 as L class
Number rebuilt20
Specifications
Configuration:
   Whyte 4-6-2
Gauge 3 ft 6 in (1,067 mm)
Total weightEc: 73  long tons  0 cwt (163,500 lb or 74.2 t)
L: 77  long tons  12 cwt (173,800 lb or 78.8 t)
Fuel typeCoal
Fuel capacity5 long tons 0 cwt (11,200 lb or 5.1 t)
Water cap.2,500 imp gal (11,000 L; 3,000 US gal)
Firebox:
  Grate area20.5 sq ft (1.90 m2)
Boiler pressureEc: 200 lbf/in2 (1.38 MPa)
L: 160 lbf/in2 (1.10 MPa)
Valve gear Walschaerts
Performance figures
Tractive effort Ec: 16,000 lbf (71.17 kN)
L: 17,952 lbf (79.85 kN)
Factor of adh. Ec: 4.5, L: 3.5
Career
Operators Western Australian Government Railways
NumbersEc236-Ec255
NicknamesBull Yanks
First run1901
Retired1958
Dispositionall scrapped

The WAGR Ec class was a class of 4-6-2 heavy passenger and goods Vauclain compound locomotives operated by the Western Australian Government Railways (WAGR) between 1901 and 1958. [1]

Contents

History

A total of 20 Ec class engines were built by Baldwin Locomotive Works, Philadelphia, in the first half of 1901, and entered service with the WAGR later that year. [2] [3] The following year, Baldwin built the first of two batches of the C class, a lighter version of the Ec class. [4]

Initially, the Ec class' main task was to haul heavy trains on the Eastern Goldfields Railway. Between 1920 and 1923, nine Ec class engines were lightened for use on the lightly laid Northam to Mullewa line, and reclassified as the Eca class. [3] [5]

All 20 were withdrawn between 1923 and 1925, with the frames, wheels, cabs and tenders married with new boilers, cylinders and valve gear at Midland Railway Workshops to become the L class. The costs of the rebuilds were recovered within four years through lower maintenance costs. [3] [5]

By the early 1930s, frame cracks were beginning to appear with 14 receiving new frames. They were replaced in the 1950s by the W class. [3] [5] [6] [7]

See also

Related Research Articles

<span class="mw-page-title-main">WAGR E class</span> Class of Australian 4-6-2 locomotives

The WAGR E class were a class of 4-6-2 steam locomotives built for the Western Australian Government Railways (WAGR) by English manufacturers Nasmyth, Wilson & Co, Vulcan Foundry and North British Locomotive Company, from 1902. The locomotives provided a huge increase in locomotive power available to the WAGR and were the mainstay traction of WAGR passenger services for two decades. The Es class was the name given to a reconstruction of all but four of the class carried out between 1924 and 1925.

<span class="mw-page-title-main">WAGR D class</span> Class of Australian 4-6-4T locomotives

The WAGR D class was a class of 4-6-4T tank locomotive operated by the Western Australian Government Railways (WAGR) between 1912 and 1964.

<span class="mw-page-title-main">WAGR Dm class</span> Class of Australian 4-6-4T locomotives

The WAGR Dm class was a class of 4-6-4T tank locomotive operated by the Western Australian Government Railways (WAGR) between 1945 and 1971.

<span class="mw-page-title-main">WAGR Dd class</span> Class of Australian 4-6-4T locomotives

The WAGR Dd class was a class of 4-6-4T tank locomotive operated by the Western Australian Government Railways (WAGR) between 1946 and 1972.

<span class="mw-page-title-main">WAGR O class</span> Australian steam locomotive class

The Western Australian Government Railways (WAGR) O Class was a class consisting of fifty-six 2-8-0 steam locomotives which were introduced by the WAGR between 1896 and 1912. Despite them being tender locomotives, they also featured short boiler side tanks for additional water storage. A useful feature for the long distances required by operation on Western Australia's country lines.

<span class="mw-page-title-main">WAGR N class</span> Class of Australian 4-4-4T locomotives

The WAGR N class was a class of steam locomotives operated by the Western Australian Government Railways (WAGR) from 1896 until 1960.

<span class="mw-page-title-main">WAGR S class</span> Class of Australian 4-8-2 locomotives

The WAGR S class was a class of 4-8-2 steam locomotives built by the Midland Railway Workshops between 1943 and 1947 and operated by the Western Australian Government Railways (WAGR).

<span class="mw-page-title-main">WAGR P and Pr classes</span> Class of Australian 4-6-2 locomotives

The WAGR P and Pr classes were two classes of 4-6-2 steam locomotives designed for express passenger service on the Western Australian Government Railways mainline network. The initial designs were prepared by E.S. Race and together the two classes had a total build number of thirty-five locomotives, the P and Pr classes entering service in 1924 and 1938 respectively. Both classes were used on express passenger services, greatly improving the economy and speed of long-distance passenger travel in Western Australia, the results of which were most visible on the Western Australian stage of the Trans-Australian Railway and Westland Express.

<span class="mw-page-title-main">WAGR V class</span> Class of Australian 2-8-2 locomotives

The WAGR V class was the last class of steam locomotive to enter service with the Western Australian Government Railways (WAGR). The class was part of the post war regeneration plan for the WAGR, intended for the heavy coal traffic between the Collie coal fields and Perth.

<span class="mw-page-title-main">WAGR J class</span> Class of Australian 4-6-0 locomotives

The WAGR J class was a three-member class of 4-6-0 steam locomotives operated by the Western Australian Government Railways (WAGR) between 1892 and 1924 before seeing further use with the State Saw Mills until the early 1930s.

<span class="mw-page-title-main">WAGR Q class (1895)</span> Class of Australian 4-6-2T locomotives

The WAGR Q class was a six-member class of 4-6-2T tank engine steam locomotives operated by the Western Australian Government Railways (WAGR) between 1896 and 1925.

<span class="mw-page-title-main">WAGR U class</span> Class of Australian 4-6-2 locomotives

The WAGR U class was a class of 4-6-2 steam locomotives operated by the Western Australian Government Railways (WAGR) between 1946 and the late 1960s. One was rebuilt as a 4-6-4 tank locomotive.

<span class="mw-page-title-main">WAGR Pm and Pmr classes</span> Class of 19+16 Australian 4-6-2 locomotives

The WAGR Pm and Pmr classes were two classes of 4-6-2 tender engine steam locomotives operated by the Western Australian Government Railways (WAGR) between 1950 and the early 1970s.

<span class="mw-page-title-main">WAGR F class</span>

The WAGR F class was a class of 4-8-0 heavy goods steam locomotives operated by the Western Australian Government Railways (WAGR) between 1902 and 1970.

<span class="mw-page-title-main">WAGR C class</span> Class of Australian 4-6-0 (later 4-6-2) locomotives

The WAGR C class was a class of light axle load steam locomotives operated by the Western Australian Government Railways (WAGR) between 1902 and 1961. A total of 22 were built in two batches.

<span class="mw-page-title-main">WAGR E class (1879)</span> Class of Australian double-Fairlie 2-4-4-2T locomotives

The WAGR E class was a two-member class of 2-4-4-2T double-Fairlie locomotives operated by the Western Australian Government Railways (WAGR) between 1881 and 1892.

<span class="mw-page-title-main">WAGR M class</span> Class of Australian 2-6-0+0-6-2 Garratt locomotives

The WAGR M class was a class of 2-6-0+0-6-2 Garratt-type articulated steam locomotives operated by the Western Australian Government Railways (WAGR) between 1912 and 1955. A total of 13 were built by Beyer, Peacock & Co, Manchester in two batches.

<span class="mw-page-title-main">WAGR G class</span> Class of steam locomotives operated by WAGR

The WAGR G class is a class of steam locomotives operated by the Western Australian Government Railways (WAGR) from 1889. The class's wheel arrangement varied; 48 were 2-6-0s and 24 were 4-6-0s.

<span class="mw-page-title-main">WAGR A class</span> Class of Western Australian 2-6-0 locomotives

The WAGR A class was a class of 2-6-0 steam locomotives designed by Beyer, Peacock & Co and operated by the Western Australian Government Railways (WAGR) between 1881 and 1955.

<span class="mw-page-title-main">WAGR S class (1888)</span> Class of Australian 0-6-0WT locomotives

The WAGR S class was a two-member class of 0-6-0WT tank locomotives operated by the Great Southern Railway (GSR) and later Western Australian Government Railways (WAGR).

References

Notes

  1. Gunzburg 1984, pp. 69, 71.
  2. Gunzburg 1984, p. 69.
  3. 1 2 3 4 Oberg, Leon (2010). Locomotives of Australia 1850s-2010. Dural: Rosenberg Publishing. pp. 112–113. ISBN   9781921719011.
  4. Gunzburg 1984, p. 72.
  5. 1 2 3 Turner, Jim (1997). Australian Steam Locomotives 1896-1958. Kenthurst: Kangaroo Press. pp. 27, 89. ISBN   086417778X.
  6. Gunzburg 1984, pp. 69–71.
  7. Gunzburg 1984, pp. 100–101.

Cited works

  • Gunzburg, Adrian (1984). A History of WAGR Steam Locomotives. Perth: Australian Railway Historical Society (Western Australian Division). ISBN   0959969039.

Commons-logo.svg Media related to WAGR Ec class at Wikimedia Commons
Commons-logo.svg Media related to WAGR L class at Wikimedia Commons