| WAGR X class | |||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Preserved XA 1401 at the Hotham Valley Railway in July 2011 | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
The WAGR X class is a now-withdrawn class of diesel locomotives built by Beyer, Peacock & Company and Metropolitan-Vickers, Bowesfield Works, Stockton-on-Tees for the Western Australian Government Railways (WAGR) between 1954 and 1956. Several members of the class have been preserved.
In the early 1950s the Western Australian Government Railways placed the largest single Australian order for diesel locomotives, when it ordered 48 2-Do-2 locomotives from Beyer, Peacock and Company and Metropolitan-Vickers. All were delivered between 1954 and 1956.[ citation needed ]
The seeds for the construction of the class were laid in by the then WAGR Chief Mechanical Engineer, Tom Marsland, with a proposal for the acquisition of 87 diesel locomotives, including 3 small jetty shunters, 18 diesel shunters and 66 mainline locomotives, later reduced to 48 when railcars were selected for suburban service. The proposal developed further during discussions with Beyer, Peacock regarding issues with the design of the W Class locomotive. [1]
The X class revolutionised operations on the WAGR. Their light axle load of around 12 tons meant they could travel on all lines, and the dual cab arrangement eliminated the need for turning. They were quickly allocated to express passenger trains including the Albany Express, Australind , Kalgoorlie Express and The Westland . Although considered as good runners, the eight driving wheels being attached to the rigid main frame caused these locomotives to ride roughly.
At the time of construction, the HST-V8 was an untested concept, though the engine itself was an evolution of a design used successfully in patrol boats during World War Two. [2] One line of thought is the motor was an evolution of either of the HRN8 marine diesel, or the HRP8 stationary diesel. [1]
The engines used Crossley's system of exhaust pulse pressure charging and developed 1,200 horsepower (895 kW) at 625 rpm, though in 1981 they were down-rated to 875 hp at 600 rpm. There were no valves, and inlet and exhaust were via ports in the cylinder walls.
Failures commenced within weeks of the first locomotives being unveiled. It was only the skill of staff at WAGR's Midland Railway Workshops that saved the day. In their early days, availability was less than for steam.
The engines burnt and leaked oil, had underfed bearings, vibrated and popped heads and pistons, and suffered from ring scuffing for most of their lives. It was only the engineering excellence, and perseverance of Midland Railway Workshops staff that kept the locomotives operating, and performance improving. In the end, over 600 design faults, mainly in the Crossley engine, were overcome. One of the strategies used to minimise problems was to de-rate the engine to 1045 hp (officially quoted as 1000 hp).
Rumours persisted that the engine was either war surplus, or formerly from a sub-maritime application. [3] Neither of these are correct, despite some publications suggesting this. [4] The myth may have arisen from Crossley's success in delivering robust engines for marine and other modes of transport. Experience in Western Australia with both Metropolitan Vickers and Crossley engines was otherwise positive. [1] It has been noted that the Irish Railways (CIÉ), through the respected Engineer Oliver Bulleid, had "heard" through the British Admiralty that the "Crossley unit gave no trouble". [5]
The Smith Royal Commission into the class identified blind faith in the British manufacturers, and chided the WAGR for ignoring the advice of supervising engineers in the UK who reported problems with the diesel motor during testing. [6] Whilst CIÉ re-engined their similarly powered Crossley 001 Class locomotives to rid themselves of the problem, [5] The Smith Royal Commission recommended against rebuilding, proposing that the entire class be replaced wholesale. To be fair to the WAGR, they were not the only ones that rushed into buying unproven traction: British Railways also did the same, buying many different types of diesel locomotives from many different manufacturers in their haste to dieselise, including purchasing the unsuccessful Class 28 Co-Bo locomotives, which could be regarded as "first cousins" to the WAGR X class. [7]
During construction, 16 locomotives were fitted with multiple unit control and denoted as XA class. [8] [9] These locomotives included communication doors at each end, and were numbered in a separate block starting from 1401.
From December 1963, Midland Workshops fitted 10 of the X class for multiple unit working, and these were reclassified as Xb class. [4] [10] Units so converted were not fitted with communication doors, and retained their original 10XX series numbers.
Whilst the class were built with locomotive pneumatic braking and train vacuum braking systems, during 1969 and 1970 eight XA class (1402, 1403, 1406, 1408, 1409, 1410, 1413 and 1416) were modified to operate with dual vacuum/air braking systems manufactured by Davies and Metcalfe to allow them to operate air-braked salt traffic on the Esperance Branch. This equipment was removed in the early 1980s, only to be reinstalled in XA 1406 (October 1986) and XA 1403 (November 1986) to allow these units to haul hired Queensland Rail SX carriages on suburban services.
In their final years, those still in service were reputed to have performed well. They ran grain trains in the South West as late as 1984, and provided power for trains following the reopening of the Fremantle line up to the last retirement in 1988.
The first were withdrawn in 1973, primarily as sources of spare parts. The last in service, XA1402 was withdrawn on 31 March 1988, after completing a transfer working. [11]
The last to operate on the public network was XA1401, under the stewardship of Hotham Valley Railway, working a consist of sleeping cars back from Dowerin on 27 August 2004. [11]
The locomotives carried the names of tribes, tribal leaders and warriors from around Australia. Within the WAGR, proposals were made to code the class as "T", and for the class to be known as the "Tribal class". This was not adopted. However, confusion at the time resulted in duplications and incorrect spellings.
Within the WAGR, the class earned the nickname "Hummingbirds" while they were called "Submarines" by rail enthusiasts.
The 48 locomotives were: [12] [13]
|
|
One X class and five XA class locomotives have been preserved:
Although prototype diesel locomotives ran in Britain before World War II, the railways of both the Republic and Northern Ireland changed over much more rapidly from steam to diesel traction than those in Britain, due to the island's limited coal reserves and an ageing steam locomotive fleet.
The Hotham Valley Tourist Railway is a tourist and heritage railway in the Peel region of Western Australia.
Western Australian Government Railways (WAGR) was the operator of railway services in the state of Western Australia between October 1890 and June 2003. Owned by the state government, it was renamed a number of times to reflect extra responsibility for tram and ferry operations that it assumed and later relinquished. Westrail was the trading name of WAGR from September 1975 until December 2000, when the WAGR's freight division and the Westrail name and logo were privatised. Its freight operations were privatised in December 2000 with the remaining passenger operations transferred to the Public Transport Authority in July 2003.
The Midland Railway of Western Australia (MRWA) was a railway company that built and operated the Midland line in Western Australia. It was listed on the London Stock Exchange. Although having its headquarters in London, it had no association with the English Midland Railway.
The Westland was the name given in 1938 to the overnight train operated by the Western Australian Government Railways (WAGR) with sitting and sleeping cars between Perth and Kalgoorlie, where it connected with the Trans-Australian service to Adelaide.
The Albany Progress was an overnight passenger train operated by the Western Australian Government Railways between Perth and Albany via the Eastern and Great Southern lines from May 1961 until December 1978.
The Railway Museum, also known as the Rail Transport Museum, is situated in Bassendean, Western Australia. It is run by the Western Australian division of the Australian Railway Historical Society (ARHS), which is called Rail Heritage WA.
The WAGR C Class was a class of steam locomotives built by Robert Stephenson and Company for the Western Australian Government Railways in 1880 to the same design as the NZR F class.
The WAGR W class is a class of 4-8-2 steam locomotives operated by the Western Australian Government Railways (WAGR) between 1951 and 1972.
The Western Australian Government Railways operated many unique steam, diesel and electric locomotive classes. Often suffering from lack of available funds the WAGR locomotive fleet often consisted of locomotives far older than their expected operational life. Only one electric locomotive was operated by the government during the WAGR years.
The WAGR P and Pr classes were two classes of 4-6-2 steam locomotives designed for express passenger service on the Western Australian Government Railways mainline network. The initial designs were prepared by E.S. Race and together the two classes had a total build number of thirty-five locomotives, the P and Pr classes entering service in 1924 and 1938 respectively. Both classes were used on express passenger services, greatly improving the economy and speed of long-distance passenger travel in Western Australia, the results of which were most visible on the Western Australian stage of the Trans-Australian Railway and Westland Express.
The Western Australian Government Railways (WAGR) Z class was a class consisting of three lightweight six-wheeled diesel-mechanical locomotives which were active in Western Australia from November 1953 to January 1983 and which have since been preserved.
The C class are a class of diesel locomotives built by English Electric, Rocklea for the Western Australian Government Railways in 1962.
The WAGR A/AA/AB classes are classes of diesel locomotives built by Clyde Engineering, Granville, New South Wales, Australia, for the Western Australian Government Railways (WAGR) between 1960 and 1969.
The M/MA class are a class of diesel-hydraulic locomotives built by Walkers Limited, Maryborough for the Western Australian Government Railways in 1972–1973.
The B class were a class of diesel locomotives built by Commonwealth Engineering for the Western Australian Government Railways between 1962 and 1965.
The MRWA E class was a single member class of diesel-hydraulic shunting (switching) locomotive built by Commonwealth Engineering, Bassendean, Western Australia, for the Midland Railway of Western Australia (MRWA) in 1957. The locomotive was later owned and operated by the MRWA's successor, the Western Australian Government Railways (WAGR).
The WAGR G class is a class of steam locomotives operated by the Western Australian Government Railways (WAGR) from 1889. The class's wheel arrangement varied; the first 24 were 2-6-0s and the last 24 4-6-0s.
The RA Class are diesel locomotives built by English Electric, Rocklea for the Western Australian Government Railways between 1969 and 1972. They were a revised version of the R class.
WAGR G class G233 Leschenault Lady is a preserved 2-6-0 steam locomotive, built in 1898 by James Martin & Co of Gawler, South Australia, for the Western Australian Government Railways (WAGR). It is the third oldest Australian-built steam locomotive still in operational order, after Victorian Railways Y class 112 and WAGR A class 15.
| Steam tender (1,067 mm (3 ft 6 in)) |    | |
|---|---|---|
| Steam tank (narrow gauge) | ||
| Steam Garratt (narrow gauge) | ||
| Diesel-hydraulic (narrow gauge) | ||
| Diesel-mechanical (narrow gauge) | ||
| Diesel-electric (narrow gauge) | ||
| Diesel-electric (standard gauge) | ||