Function | Crewed suborbital launch and reentry |
---|---|
Manufacturer | XCOR Aerospace |
Size | |
Stages | 1 |
First stage | |
Engines | 4 |
Thrust | 2,900 pounds |
Propellant | LOX-kerosene |
The XCOR Lynx was a proposed suborbital horizontal-takeoff, horizontal-landing (HTHL), rocket-powered spaceplane that was under development by the California-based company XCOR Aerospace to compete in the emerging suborbital spaceflight market. The Lynx was intended to carry one pilot, a ticketed passenger, and/or a payload above 100 kilometres (62 mi) altitude. The concept was under development since 2003, when a two-person suborbital spaceplane was announced under the name Xerus.
In January 2016, XCOR changed plans for the first flight of the Lynx spaceplane. It was initially planned for the second quarter of 2016 from the Midland spaceport in Texas, [1] but, in early 2016, it was pushed to an "undisclosed and tentative" date at the Mojave spaceport. [2]
In May 2016, [3] XCOR announced development of the Lynx had been halted with layoffs of approximately one-third of the staff; the company intended to concentrate on development of their liquid hydrogen rocket under contract with United Launch Alliance, instead. [4]
Following the bankruptcy of XCOR Aerospace in 2017, the assets of the company were sold to the nonprofit organization Build A Plane, which will focus on education rather than suborbital flight. [5]
In 2003, XCOR proposed the Xerus (pronunciation: zEr'us) suborbital spaceplane concept. It was to be capable of transporting one pilot and one passenger as well as some science experiments. It would even be capable of carrying an upper stage which would launch near apogee and, therefore, would potentially be able to carry satellites into low Earth orbit. [6] As late as 2007, XCOR continued to refer to their future two-person spaceplane concept as Xerus. [7]
The Lynx spaceplane was initially announced in March 2008, with plans for an operational vehicle within two years. [8] In December 2008, a ticket price of US$ 95,000 (equivalent to US$ 134,439 in 2023) per seat was announced, with flights intended to commence in 2010. [9] The build of the Lynx Mark I flight article did not commence until mid-2013 and XCOR claimed that the first flight would take place in 2015. [10] [11] In July 2015, ticket prices increased by 50% to US$ 150,000 (equivalent to US$ 192,812 in 2023). [12] In November 2015, three co-founders left their existing positions with the company to start Agile Aero. Dan DeLong (Chief Engineer) and Aleta Jackson left the company entirely, while Jeff Greason, the former CEO, remained on the Board of Directors until he resigned in March 2016. [13] Greason cited problems with the Lynx vehicle body, although the engine had been a success. As of mid 2016, development was suspended in favor of a ULA contracted hydrolox engine, the 8H21. [4]
Passengers who had hoped to make flights in the Lynx included the winners from the Axe Apollo Space Academy contest and Justin Dowd of Worcester, Massachusetts, the winner of another contest called the Race for Space. [14] Metro International's Race for Space newspaper contest. [15] By July 2015, the passenger ticket was projected to cost US$ 150,000. [16] As of December 2015, Kayak.com was reportedly selling tickets for flights on the XCOR Lynx starting in 2016. [17]
In May 2016, the company halted development of the Lynx spaceplane and pivoted company focus toward development its LOX/LH2 engine technology, particularly on a funded project for United Launch Alliance. The company laid off more than 20 people of the 50–60 persons on board prior to May. [4]
The Lynx was intended to have four liquid rocket engines at the rear of the fuselage burning a mixture of LOX-Kerosene, each engine producing 2,900 pounds-force (13,000 N) of thrust. [18]
The Lynx Mark III was intended to be the same vehicle as the Mark II with an External Dorsal Mounted Pod of 650 kg (1,430 lb) and was to be large enough to hold a two-stage carrier to launch a microsatellite or multiple nanosatellites into low Earth orbit. [26]
The XR-5K18 is a piston pump fed LOX/Kerosene engine using a closed-loop brayton cycle. [26] [27]
The development program of the XCOR Lynx 5K18 LOX/kerosene engine reached a major milestone in March 2011. Integrated test firings of the engine/nozzle combination demonstrated the ability of the aluminum nozzle to withstand the high temperatures of rocket-engine exhaust. [28]
In March 2011, United Launch Alliance (ULA) announced they had entered into a joint-development contract with XCOR for a flight-ready, 25,000 to 30,000 pounds-force (110,000–130,000 N) cryogenic LH2/LOX upper-stage rocket engine (see XCOR/ULA liquid-hydrogen, upper-stage engine development project). The Lynx 5K18 effort to develop a new aluminum alloy engine nozzle using new manufacturing techniques would remove several hundred pounds of weight from the large engine leading to significantly lower-cost and more-capable commercial and US government space flights. [29]
It was reported in 2010 that the Mark I airframe could use a carbon/epoxy ester composite, and the Mark II a carbon/cyanate with a nickel alloy for the nose and leading-edge thermal protection. [30]
The flight article Lynx Mark I was claimed as being fabricated and assembled in Mojave beginning in mid 2013. [31] The cockpit of the Lynx (made of carbon fiber and designed by AdamWorks, Colorado) was reported as being one of the items that held up the assembly. [19]
At the start of October 2014, the cockpit was attached to the fuselage. [32] The rear carry-through spar was attached to the fuselage shortly after Thanksgiving 2014. [33] At the beginning of May 2015, the strakes were attached to the airframe. [34] The last major component, the wings, were expected to be delivered in late 2015. [35] In January 2016, XCOR's CEO Jay Gibson said "…we anticipate the wings to be there in the very near future…" and the CTO Michael Valant said they were finding that calibrating the flaps was a challenge. [2] In February 2016, the first prototype was described as a "wingless shell." [36]
In XCOR's November 2016 news report, they stated that "Even though the program made great forward progress integrating the vehicle structural elements during 2015 and early 2016 the progress on the control surface elements lagged in design. In an effort to prevent potential rework resulting from implementing designs not yet mature the Lynx fabrication was paused, so our engineering team has gone back to the design board." [37]
Tests of the XR-5K18 main engine began in 2008. [38]
In February 2011, it was reported that engine tests were largely complete [23] and the vehicle aerodynamic design had completed two rounds of wind tunnel testing. A third and final round of tests was completed in late 2011 using a "1/60-scale supersonic wind tunnel model of Lynx." [20] [23]
In October 2014, XCOR claimed that flight tests of the Mark I prototype would start in 2015. [10] [11] [39] By January 2016, however, technical hurdles led the company to state that they had not assigned a new projected date for test flights. [2]
In March 2011, XCOR submitted the Lynx as a reusable launch vehicle for carrying research payloads in response to NASA's suborbital reusable launch vehicle (sRLV) solicitation, which is a part of NASA's Flight Opportunities Program. [40] No contract for providing this was ever announced.
According to XCOR, the Lynx was intended to fly four or more times a day, and would have also had the capacity to deliver payloads into space. The Lynx Mark I prototype was expected to perform its first test flight in 2015, [11] [41] followed by a flight of the Mark II production model twelve to eighteen months afterwards. [11]
XCOR had planned to have the Lynx's initial flights at the Mojave Air and Spaceport in Mojave, California [42] or any licensed spaceport with a 2,400-metre (7,900 ft) runway. Media reports in 2014 anticipated that, by the end of 2015 or in 2016, the Lynx was expected to begin flying suborbital space tourism flights and scientific research missions from a new spaceport on the Caribbean island of Curaçao. [43] [44] However, the company stated in January 2016 that they had not assigned a new projected date for test flights and a date for the launch of commercial operations could not be anticipated. [2]
Because it lacked any propulsion system other than its rocket engines, the Lynx would have to be towed to the end of the runway. Once positioned on the runway, the pilot would have ignited the four rocket engines, take-off and begin a steep climb. The engines will be shut off at approximately 138,000 feet (42 km) and Mach 2. The spaceplane would then continue to climb, unpowered until it reached an apogee of approximately 200,000 feet (61 km). The spacecraft would have experienced a little over four minutes of weightlessness before re-entering the Earth's atmosphere. The occupants of the Lynx were intended to have experienced up to four times normal gravity during re-entry. After re-entry, the Lynx would have glided down and performed an unpowered landing. The total flight time was projected to last about 30 minutes. [26] The Lynx was expected to be able to perform 40 flights before maintenance was required.
Orbital Outfitters was reportedly designing pressure suits for XCOR use. [45] In 2012, Orbital Outfitters reported that they had completed a technical mockup of the Lynx craft itself. [46]
In 2008, Mark I production was projected to cost US$ 10 million (equivalent to US$ 14 million in 2023), [47] [48] and the Mark II around US$ 12 million (equivalent to US$ 17 million in 2023). [49]
Armadillo Aerospace was an aerospace startup company based in Mesquite, Texas. Its initial goal was to build a crewed suborbital spacecraft capable of space tourism, and it had also stated long-term ambitions of orbital spaceflight. The company was founded by John Carmack, co-founder and former chief technical officer of id Software.
Human spaceflight programs have been conducted, started, or planned by multiple countries and companies. Until the 21st century, human spaceflight programs were sponsored exclusively by governments, through either the military or civilian space agencies. With the launch of the privately funded SpaceShipOne in 2004, a new category of human spaceflight programs – commercial human spaceflight – arrived. By the end of 2022, three countries and one private company (SpaceX) had successfully launched humans to Earth orbit, and two private companies had launched humans on a suborbital trajectory.
A reusable launch vehicle has parts that can be recovered and reflown, while carrying payloads from the surface to outer space. Rocket stages are the most common launch vehicle parts aimed for reuse. Smaller parts such as rocket engines and boosters can also be reused, though reusable spacecraft may be launched on top of an expendable launch vehicle. Reusable launch vehicles do not need to make these parts for each launch, therefore reducing its launch cost significantly. However, these benefits are diminished by the cost of recovery and refurbishment.
A spaceplane is a vehicle that can fly and glide like an aircraft in Earth's atmosphere and maneuver like a spacecraft in outer space. To do so, spaceplanes must incorporate features of both aircraft and spacecraft. Orbital spaceplanes tend to be more similar to conventional spacecraft, while sub-orbital spaceplanes tend to be more similar to fixed-wing aircraft. All spaceplanes to date have been rocket-powered for takeoff and climb, but have then landed as unpowered gliders.
Skylon is a series of concept designs for a reusable single-stage-to-orbit spaceplane by the British company Reaction Engines Limited (Reaction), using SABRE, a combined-cycle, air-breathing rocket propulsion system.
XCOR Aerospace was an American private spaceflight and rocket engine development company based at the Mojave Air and Space Port in Mojave, California, Midland International Air and Spaceport in Midland, Texas and the Amsterdam area, the Netherlands. XCOR was formed in 1999 by former members of the Rotary Rocket rocket engine development team, and ceased operations in 2017.
Masten Space Systems was an aerospace manufacturer startup company in Mojave, California that was developing a line of vertical takeoff, vertical landing (VTVL) rockets, initially for uncrewed research sub-orbital spaceflights and eventually intended to support robotic orbital spaceflight launches.
The XCOR EZ-Rocket was a test platform for the XCOR XR-4A3 rocket propulsion system. The airplane was a modified Rutan Long-EZ, with the propeller replaced by first one, then later a pair of pressure-fed regeneratively cooled liquid-fueled rocket engines and an underslung fuel tank. The engines were restartable in flight, and were contained within Kevlar armor shielding. The EZ-Rocket was registered as an experimental aircraft.
UP Aerospace, Inc. is a private spaceflight corporation headquartered in Denver, Colorado. UP Aerospace provides sub-orbital transportation for corporate, military and educational payloads, via their SpaceLoft XL sounding rocket launch vehicles.
The Airbus Defence and Space Spaceplane, also called EADS Astrium TBN according to some sources, is a suborbital spaceplane concept for carrying space tourists, proposed by EADS Astrium, the space subsidiary of the European consortium EADS. A full-size mockup was officially unveiled in Paris, France, on June 13, 2007, and is now on display in the Concorde hall of the Musée de l'Air et de l'Espace. The project is the first space tourism entry by a major aerospace contractor.
Air-launch-to-orbit (ALTO) is the method of launching smaller rockets at altitude from a heavier conventional horizontal-takeoff aircraft, to carry satellites to low Earth orbit. It is a follow-on development of air launches of experimental aircraft that began in the late 1940s. This method, when employed for orbital payload insertion, presents significant advantages over conventional vertical rocket launches, particularly because of the reduced mass, thrust, cost of the rocket, geographical factors, and natural disasters.
RocketShip Tours is an American space tourism company founded in 2008 by travel industry entrepreneur Jules Klar and which planned to provide sub-orbital human spaceflights to the paying public, in partnership with rocketplane developer XCOR Aerospace. Klar created RocketShip Tours to act as General Sales Agent for XCOR Aerospace.
Aircraft have different ways to take off and land. Conventional airplanes accelerate along the ground until reaching a speed that is sufficient for the airplane to takeoff and climb at a safe speed. Some airplanes can take off at low speed, this being a short takeoff. Some aircraft such as helicopters and Harrier jump jets can take off and land vertically. Rockets also usually take off vertically, but some designs can land horizontally.
The DARPA XS-1 was an experimental spaceplane/booster with the planned capability to deliver small satellites into orbit for the U.S. Military. It was reported to be designed to be reusable as frequently as once a day, with a stated goal of doing so for 10 days straight. The XS-1 was intended to directly replace the first stage of a multistage rocket by taking off vertically and flying to hypersonic speed and high suborbital altitude, enabling one or more expendable upper stages to separate and deploy a payload into low Earth orbit. The XS-1 would then return to Earth, where it could ostensibly be serviced fast enough to repeat the process at least once every 24 hours.
Bristol Spaceplanes (BSP) is a British aerospace company based in Bristol, England, who has designed a number of spaceplanes with sub-orbital and orbital capabilities. The company's stated goal is "to realise low-cost access to space", primarily through reusable launch vehicles, claiming the cost of human space travel has the potential to be reduced by a factor of 1,000.
Vector-R is a two-stage orbital expendable launch vehicle under development by the American aerospace company Vector Launch to cover the commercial small satellite launch segment (CubeSats). Vector Launch went bankrupt in December 2019 and re-emerged in October 2020. Two prototypes were launched in 2017.
i-Space —also known as Space Honor, Beijing Interstellar Glory Space Technology Ltd., Interstellar Glory or StarCraft Glory—is a Chinese private space technology development and space launch company based in Beijing, founded in October 2016.
WIRES is a Japanese project developing a winged single-stage reusable suborbital rocket as a test bed for a reusable orbital launch system or a crewed suborbital spaceplane. The full-size prototype, called WIRES-X, is expected to be launched in 2020.
BluShift Aerospace is an employee-owned American aerospace firm based in Brunswick, Maine. Targeting the growing smallsat and cubesat launch markets, bluShift is developing suborbital sounding rockets and small-lift orbital rockets which will be launched from a proposed new spaceport in Maine. The company has received primary funding from NASAs SBIR grant program, the National Science Foundations I-Corps grant program, the Maine Technology Institute, and the Maine Space Grant Consortium. The company has active operations at the former Brunswick Naval Air Station and Loring Air Force Base.