This article needs additional citations for verification .(October 2008) |
Part of the Politics series |
Voting |
---|
Politicsportal |
A ballot is a device used to cast votes in an election and may be found as a piece of paper or a small ball used in voting. [1] It was originally a small ball (see blackballing) used to record decisions made by voters in Italy around the 16th century. [2]
Each voter uses one ballot, and ballots are not shared. In the simplest elections, a ballot may be a simple scrap of paper on which each voter writes in the name of a candidate, but governmental elections use pre-printed ballots to protect the secrecy of the votes. The voter casts their ballot in a box at a polling station.
In British English, this is usually called a "ballot paper". [3] The word ballot is used for an election process within an organization (such as a trade union "holding a ballot" of its members).
The word ballot comes from Italian ballotta, meaning a "small ball used in voting" or a "secret vote taken by ballots" in Venice, Italy. [4]
In ancient Greece, citizens used pieces of broken pottery to scratch in the name of the target of the ostracism.
The first use of paper ballots to conduct an election appears to have been in Rome in 139 BC, following the introduction of the lex Gabinia tabellaria.
In ancient India, around 920 AD, in Tamil Nadu, palm leaves were used for village assembly elections. The palm leaves with candidate names were put inside a mud pot for counting. This was called Kudavolai system. [5] [6] [7]
The first use of paper ballots in America was in 1629 within the Massachusetts Bay Colony to select a pastor for the Salem Church. [8] Paper ballots were pieces of paper marked and supplied by voters.
Before the introduction of the secret ballot, American political parties distributed ballots listing their own candidates for party supporters to deposit in ballot boxes.
Depending on the type of voting system used in the election, different ballots may be used. Ranked ballots allow voters to rank candidates in order of preference, while ballots for first-past-the-post systems only allow voters to select one candidate for each position. In party-list systems, lists may be open or closed.
Ballot design can aid or inhibit clarity in an election. Poor designs lead to confusion and potentially chaos if large numbers of voters spoil or mismark a ballot. The "butterfly ballot" used in the Palm Beach County, Florida 2000 U.S. presidential election (a ballot paper that has names down both sides, with a single column of punch holes in the center, which has been likened to a maze [9] [10] ) led to widespread allegations of mismarked ballots. [11] The ballot was designed to have a larger print, making it easier for the elderly voters of Palm Beach to read, but instead, it led to the names of candidates being alternately offset, with lines on both sides of each punch hole, creating confusion. [12]
In a jurisdiction using an all-paper system, voters choose by marking a ballot or, as in the case of Israel and France, picking one premarked ballot among many. In most jurisdictions the ballots are preprinted with names of candidates and the text of the referendums. Japan is an exception, requiring voters to write candidate names on the ballot. [13] Election officials manually count the ballots after the polls close and may recount them in the event of a dispute.
In a jurisdiction using an optical scan voting system, voters choose by filling an oval, by completing an arrow, or (as in South Korea) by stamping a box, on the printed ballot next to their chosen option, similar to many standardized tests. Voters with disabilities may be provided with electronic ballot marking devices.
Alternatively, voters could pick from one pre-marked ballot among many (similarly to the paper ballot systems in Israel and France), which would then be scanned by an optical scanner. Tabulating machines count the ballots either after the polls close or as the voters feed the ballots into the machine, in which case the results are not known until after the polls close. Officials will often manually count any ballots that cannot be read or with a write-in candidate and may recount all ballots in the event of a dispute.
In a jurisdiction using a punched card system, voters choose by removing or "punching out" a perforated chad from the ballot next each choice, sometimes with tools as simple as a pin, but usually with a ballot marking device such as the Votomatic. The ballot may be preprinted with candidates and referendums, or may be a generic ballot placed under a printed list of candidates and referendums. Tabulating machines count ballots after the polls close. Officials may manually count the ballots in the event of a dispute. Punched card voting systems are being replaced by other voting systems because of a high rate of inaccuracy related to the incomplete removal of the perforated chad and the inaccessibility to voters with disabilities.
In a jurisdiction using a mechanical voting system, often called a "voting machine", voters choose by pulling a lever next to their choice. There is a printed list of candidates, parties and referendums next to the levers indicating which lever is assigned to which choice. When the voter pulls a lever, it turns a connected gear in the machine, which turns a counter wheel. Each counter wheel shows a number, which is the number of votes cast using that lever. After the polls close, election officials check the wheels' positions and record the totals. No physical ballot is used in this system, except when the voter chooses to write-in a candidate. Other systems are replacing mechanical voting systems because they are inaccessible to disabled voters, do not have a physical ballot, or are getting old.
In a jurisdiction using an electronic direct record voting system (DRE), voters choose by pushing a button next to a printed list of candidates and referendums, or by touching the candidate or referendums box on a touchscreen interface, or (as in Brazil) by inputting alphanumeric codes that correspond to candidates or positions. As the voter makes a selection, the DRE creates an electronic ballot stored by in the memory components of the system. After the polls close, the system counts the votes and reports the totals to the election officials. Many DREs include a communication device to transmit vote totals to a central tabulator. The touchscreen systems are similar to an automated teller machine (ATM).
Most DRE voting machines in the U.S. now include an auditable paper ballot, a widely accepted best practice for election administration. [14] [15] After voters register their choices on the touchscreen, a paper ballot is created with the choices printed on it. The voter visually verifies that the choices are correct, then inserts the paper ballot into a secure box where ballots are accumulated for use in audits or recounts.
As of the 2024 US general election, only 1.4 percent of voters use DRE machines without a paper record, including the entire state of Louisiana. [16]
Voting refers to the process of choosing officials or policies by casting a ballot, a document used by people to formally express their preferences. Republics and representative democracies are governments where the population chooses representatives by voting.
The 2000 United States presidential election recount in Florida was a period of vote recounting in Florida that occurred during the weeks after Election Day in the 2000 United States presidential election between George W. Bush and Al Gore. The Florida vote was ultimately settled in Bush's favor by a margin of 537 votes out of 5,825,043 cast when the U.S. Supreme Court, in Bush v. Gore, stopped a recount that had been initiated upon a ruling by the Florida Supreme Court. Bush's win in Florida gave him a majority of votes in the Electoral College and victory in the presidential election.
A voting machine is a machine used to record votes in an election without paper. The first voting machines were mechanical but it is increasingly more common to use electronic voting machines. Traditionally, a voting machine has been defined by its mechanism, and whether the system tallies votes at each voting location, or centrally. Voting machines should not be confused with tabulating machines, which count votes done by paper ballot.
The electoral system of Australia comprises the laws and processes used for the election of members of the Australian Parliament and is governed primarily by the Commonwealth Electoral Act 1918. The system presently has a number of distinctive features including compulsory enrolment; compulsory voting; majority-preferential instant-runoff voting in single-member seats to elect the lower house, the House of Representatives; and the use of the single transferable vote proportional representation system to elect the upper house, the Senate.
Electronic voting is voting that uses electronic means to either aid or take care of casting and counting ballots including voting time.
The secret ballot, also known as the Australian ballot, is a voting method in which a voter's identity in an election or a referendum is anonymous. This forestalls attempts to influence the voter by intimidation, blackmailing, and potential vote buying. This system is one means of achieving the goal of political privacy.
A ballot box is a temporarily sealed container, usually a square box though sometimes a tamper resistant bag, with a narrow slot in the top sufficient to accept a ballot paper in an election but which prevents anyone from accessing the votes cast until the close of the voting period. A ballot drop box allows voters who have received a ballot by mail to submit it for counting in a self-service fashion. In the United States, ballot boxes are usually sealed after the end of polling, and transported to vote-counting centers.
An electronic voting machine is a voting machine based on electronics. Two main technologies exist: optical scanning and direct recording (DRE).
Vote counting is the process of counting votes in an election. It can be done manually or by machines. In the United States, the compilation of election returns and validation of the outcome that forms the basis of the official results is called canvassing.
In the politics of the United States, elections are held for government officials at the federal, state, and local levels. At the federal level, the nation's head of state, the president, is elected indirectly by the people of each state, through an Electoral College. Today, these electors almost always vote with the popular vote of their state. All members of the federal legislature, the Congress, are directly elected by the people of each state. There are many elected offices at state level, each state having at least an elective governor and legislature. There are also elected offices at the local level, in counties, cities, towns, townships, boroughs, and villages; as well as for special districts and school districts which may transcend county and municipal boundaries.
Voter verifiable paper audit trail (VVPAT) or verified paper record (VPR) is a method of providing feedback to voters who use an electronic voting system. A VVPAT allows voters to verify that their vote was cast correctly, to detect possible election fraud or malfunction, and to provide a means to audit the stored electronic results. It contains the name and party affiliation of candidates for whom the vote has been cast. While VVPAT has gained in use in the United States compared with ballotless voting systems without it, hand-marked ballots are used by a greater proportion of jurisdictions.
A DRE voting machine, or direct-recording electronic voting machine, records votes by means of a ballot display provided with mechanical or electro-optical components that can be activated by the voter. These are typically buttons or a touchscreen; and they process data using a computer program to record voting data and ballot images in memory components. After the election, it produces a tabulation of the voting data stored in a removable memory component and as printed copy. The system may also provide a means for transmitting individual ballots or vote totals to a central location for consolidating and reporting results from precincts at the central location. The device started to be massively used in 1996 in Brazil where 100% of the elections voting system is carried out using machines.
An election official, election officer, election judge, election clerk, or poll worker is an official responsible for the proper and orderly voting at polling stations. Depending on the country or jurisdiction, election officials may be identified as members of a political party or non-partisan. They are generally volunteers or paid a small stipend for their work. Each polling station is staffed with multiple officials. The duties include signing in registered voters, explaining voting procedure and use of voting equipment, providing ballots, and monitoring the conduct of the election.
The Mercuri method is the most popular and notable form of a voter verified paper audit trail (VVPAT). It is a modification to direct-recording electronic (DRE) voting machines to provide a physical paper audit record that may be used to verify an electronic vote count.
In voting, a ballot is considered spoilt, spoiled, void, null, informal, invalid or stray if a law declares or an election authority determines that it is invalid and thus not included in the vote count. This may occur accidentally or deliberately. The total number of spoilt votes in a United States election has been called the residual vote. In Australia, such votes are generally referred to as informal votes, and in Canada they are referred to as rejected votes.
End-to-end auditable or end-to-end voter verifiable (E2E) systems are voting systems with stringent integrity properties and strong tamper resistance. E2E systems use cryptographic techniques to provide voters with receipts that allow them to verify their votes were counted as cast, without revealing which candidates a voter supported to an external party. As such, these systems are sometimes called receipt-based systems.
An election recount is a repeat tabulation of votes cast in an election that is used to determine the correctness of an initial count. Recounts will often take place if the initial vote tally during an election is extremely close. Election recounts will often result in changes in contest tallies. Errors can be found or introduced from human factors, such as transcription errors, or machine errors, such as misreads of paper ballots.
Electoral reform in Florida refers to efforts to change the voting and election laws in the United States state of Florida.
There are five types of elections in the United Kingdom: elections to the House of Commons of the United Kingdom, elections to devolved parliaments and assemblies, local elections, mayoral elections, and police and crime commissioner elections. Within each of those categories, there may also be by-elections. Elections are held on Election Day, which is conventionally a Thursday, and under the provisions of the Dissolution and Calling of Parliament Act 2022 the timing of general elections can be held at the discretion of the prime minister during any five-year period. All other types of elections are held after fixed periods, though early elections to the devolved assemblies and parliaments can occur in certain situations. The five electoral systems used are: the single member plurality system (first-past-the-post), the multi-member plurality, the single transferable vote, the additional member system, and the supplementary vote.
Electronic voting in the United States involves several types of machines: touchscreens for voters to mark choices, scanners to read paper ballots, scanners to verify signatures on envelopes of absentee ballots, and web servers to display tallies to the public. Aside from voting, there are also computer systems to maintain voter registrations and display these electoral rolls to polling place staff.
{{cite web}}
: CS1 maint: url-status (link)